WRT54GC connection Droppping.

Similar Questions

• WRT54GC and Speedtouch 510 modem

  Hi all

  I bought the wtr54gc a bit backward and tried to connect it to this darn speedtouch 510 modem, but nothing helped.

  I can connect to wirlessly for the wrt with no problems and have implemented under PPPOE with the correct credentials. The wrt is configured in Bridge mode.

  Now, when I connect the Speedtouch modem to the WAN port on the WRT, the router is not "dial" the internet connection at all, so no Internet; o)

  I know that the modem is fine as I can connect the PC directly to him and get an Internet connection.

  Now, I've been juggling for a long time and I think there may be a problem to do with the router and the modem running DHCP and the two do not talk to each other. The modem works on 10.0.0.138. The Rotuer uses the standard 192.168.1.1 address.

  My question is how to fix this? On which box DHCP must be turned on/off?

  Ive read somehwere on the execution of the modem in Bridge mode. This will help?

  I can be barking the wrong tree altogether so any help would be appreciated and need detailed help coz that it really starts to bug me! ouchhhhhhhh! (O).

  Respect to all.

  Your problem is that the SpeedTouch 510 is not a modem is a modem-router and already have your PPPoE connection for you.  You shouldn't try to do two times your PPPoE connection.

  There are two solutions:

  (a) automatic WRT54GC Connection Type Internet 'DHCP' value or

  (b) set the bridge mode SpeedTouch, so converting it to a real modem.  Then do your PPPoE with the WRT54GC connection.

  Note that with the option a, let two active DHCP servers and the ethernet port on the SpeedTouch to thread on the Internet on the WRT54GC port.

  With option (b), the SpeedTouch DHCP server is automatically disabled.

• Cannot connect my HP Photosmart c309g-m printer to my Linksys WRT54GC router. "No filtering = FAIL.

  I have problems connecting my HP Photosmart c309g-m to my Linksys WRT54GC router.  The diagnostics report says "no filtering = FAIL" in all my attempts.

  First I had implemented security wireless to the router with a personal WPA2 password.

  Because this does not work, I spent my WPA security, given that the diagnostic report suggests that this is what he actually uses for encryption. This no longer works.

  I double and triple checked the MAC address of the printer in my MAC filtering wireless settings. He was right. However, he didn't always connect.

  Reluctantly, I turned MAC filtering. However, the printer still wouldn't connect.

  Now, I'm out of options. All possible ideas for this problem?

  Here are a few ideas:

  1. check that the SSID is being broadcast.

  2. make sure that DHCP is active.

  3. don't use MAC filtering (it is not a security measure, in any case).

  4 change the channel from router to 11.

• No wired connection on WRT54GC

  I have a router WRT54GC.  I have no wired connection of the device.  It was working fine and then just stopped.  I noticed that when I unplug the router and let sit for awhile and then try again the connection is there for a few minutes.  A few minutes at least gives me a chance to connect to the router.  All suggested settings are always topical without change.  Free wireless in the minutes also works.  As I sit in front of her suddenly the connection is lost.  Any ideas?

  OK, I thought about it.  The downloaded and extracted from the Linksys site .img file is good.  Download computer is only used to store the file. Download computer isn't able to open the file.  At first, I thought to update the firmware with a unknown file type could lead to losing the administration program.  The router itself includes the .img file.  I downloaded the file in the router and eureka, it works!  The wired connection with the router problem was because I had the Internet connection that is connected to the router.  The initial symptom of distress was a power LED flashing intermittently. Forum of thank you for your help.

• WRT54GC failed to get a valid gateway entry when connecting through PPPoE

  Hi Experts,

  I'm moving my WRT54G Router that uses more than 5 years for a WRT54GC I got from my friend. I have clone each entry of the WRT54G to the new MAC address of one, even. Here's what I captured of the old WRT54G Router when it connected via PPPoE

  Connection type: PPPoE
  Connection status: connected
  IP address: 114.91.200.128
  Subnet mask: 255.255.255.255
  Default gateway: 124.74.12.242
  DNS 1: 180.168.255.118
  DNS 2: 116.228.111.18
  DNS 3:
  MTU: 1492

  from the web administration interface, I can ping and traceroute yahoo.com, so can I browse any website from my PC.

  and here is what I have captured new WRT54GC router when connected via PPPoE

  Connection type: PPPoE
  IP address: 180.158.83.182
  Subnet mask: 255.255.0.0
  Default gateway:
  DNS1: 180.168.255.118
  DNS2: 116.228.111.18

  the web administration interface, I can ping and traceroute yahoo.com, but I can not browse any website from my PC.

  Could you get it someone please let me know if there is something I misconfigured?

  Thank you

  Probably your ISP don't like it if you try to connect two times with the same account of different devices.

  I suggest you press the disconnect on the WRT54G to close the PPPoE session before trying it on the new.

  Or stopping for the night and try the new router first thing in the morning...

• HP 15 Notebook PC: Wifi connectivity problem

  Please help me because I am unable to connect wifi normally. Whenever I want to connect to my wifi, I struggle with my computer for atlest 1/2 hour. For a while, it shows my network in the list of networks and after selection and pasword it throws an error could not connect to the network. At this point my compltely wifi turned off. Sometimes he luckyly connects, but dropps in the middle. I tried to install latest driver "HP Support Assistance" software, uninstalled it several times installed. But no use. Other cameras working with my network are connecting without problems. Please help me solve this issue.

  Thanks in advance.

  I don't know the correct reason why my laptop connected not througb wifi. but it has been resolved automatically when my upgraed my os from 8.1 to windows 10.

• Bug of Linksys WRT54GC Mode of operation of "router"?

  I use a Linksys WRT54GC router and I experience a behavior that I don't expect.
  You give me your opinion?
  This is the case:

  My assumption of "Gateway" or "Router" operating Mode is:
  Gateway mode means NAT that makes invisible LAN subnet side WAN addresses. NAT is disabled by activating the Mode of operation of 'Gateway' to 'router '.

  I have connected a PC (192.168.2.100) to port the router WAN and another (192.168.23.100) PC on a LAN (192.168.23.1) of the router (192.168.2.2) port.
  When I switch my WRT54GC "Router" mode I can't always ping the PC on the site of the side router LAN WAN. SPI Firewall protection and block anonymous Internet requests are disabled. Firewalls on both computers is disabled.

  I saw a similar problem at the forum "Connecting two routers via WAN" 08/28/2008 Victor Tang.

  Don't you think that it is a bug in the mode of operation of the WRT54GC software?

  I reported the bug to Linksys.

  My first experience with Linksys technical support is very good.

  They take the serious problem, ask for the discharge of Wireshark and send me an update of the firmware of the router.

  This fixes the bug with the mode of operation, now I can without NAT on and outside, very well!

  I don't have firmware update earlier because the release notes did not mention my bug, I read in the forum a lot of users having problems after the update of the firmware, so I followed the policy do not update unless it can solve your problem.

  There are some things perhaps worth mentioning:

  You should be careful to use the right firmware for your router.

  Not only the model of the router is too important, the hardware version and too country!

  I've got a WRT54GC, hardware version 1, and it is the type of the EU.

  Of this material, there's also a different US with versions of firmware version!

  The latest version of the firmware to the US type is v1.60.1, the latest version of the EU type is 1.60.0 v.

  Thus, you should take care of this website, you download the update to get the right version and read the release notes. These release notes, you can check if your current firmware version is part of the history of this firmware, so you know that you have the right one. I was so very accurate because many have reported problems in the forum with updates.

  Now I'm able to Exchange traffic between computers and printers in different subnets and I can access the Internet from each subnet gateway I want.

  It is important to think about the configuration of your PC and routing tables.

  The firewall on the computers must be configured on the additional subnet.

  A PC has a default gateway to reach a device on another subnet.

  Most of the time these are devices on the Internet, so if you create additional internal subnets that your traffic will be by default will be send to the Internet and will be lost. To define additional gateways where your additional subnet can be found to avoid this.

  This can be done on a PC with the command: route add (IE 192.168.23.0 mask 255.255.255.0 192.168.2.2) or you define a static route to your router (the latter is preferable).

  The problems I've had, forced me to consider how does networking, with the help of the users on this forum, I would conclude that this is a bug, with the support of very good Linksys everything now works as expected.

  Thank you.

• Port for uTorrent - WRT54GC

  Hello

  I need further assistance.

  I want to free ports for uTorrent.

  I have a router WRT54GC.

  I successfully logged in and clicked on Applications and games, and I think that there should I typed port in tab Port range forwarding.

  Given that I'm not good at this stuff, and it's my first time there is. I want to know what are the beginning and end for uTorrent port numbers, or where I can find it. I have uTorrent 2.0.3 and I found the current port (for inbound connections) in the installation guide. In the preferences and besides I can't find nothing with 'port' in it.

  As for the Protocol, I would (TCP and UDP), the IP address is the same and will check Enabled. Only, I don't know the start and end port.

  Thank you further and I appreciate the help!

  Thank you

  ALEKS

  I solved it ^^

• WRT54GC - cannot open a session

  Hello

  I have a router WRT54GC, worm. 2.0 if it is important, and I can't connect to an IP address.

  I let the empty user name and password, I type admin, but it does not work. It gives me the 401 Unauthorized.

  I asked my brother if he changed username and password once, but he says that he has not.

  I'm an amateur at this but naked with me.

  Here, I saw that someone had the same problem and the user solved with the reset button.

  It might sounds stupid to say, but there is no button on this router. On one side are the lights, on the other hand are plug-ins (or how would you call it).

  Is there something else that won't connect, next to possible changes of password/username?

  How can I fix it or do the factory settings if I do not have a reset button?

  And if I do a factory settings; There effect on the telefone/connectivity somehow line but, maybe stupid guestion, he observes the same password and user name for the wi - fi connection after the factory settings?

  I would really appreciate the help.

  In addition, grace

  ALEKS

  Press and hold the pinhole reset on the back that says "reset" for 30 seconds, then release it.  Try now.

• Problem with Remote Desktop using router WRT54GC

  Hi all.

  My husband and I travel with a computer and an iPhone each, so 4 wireless devices, when we travel, we use the WRT54GC to connect to DSL or broadband from the hotel and then create a LAN in the room using the WRT54GC so we can connect all our devices through the router to the internet.

  Key steps are:

  (1) connect to the router from the hotel to rent a computers IP address.

  (2) do an ipconfig to get the IP address leased the hotel, over the subnet, DNS servers, etc.

  (3) hook a computer into the WRT54GC and give him the IP address and other parameters and clone the IP address of the original computer used to connect to the hotel so that the hotel think that our WRT54GC is the same device.

  (4) connect the router to the wall to talk to the router of the hotel and to connect our devices on wifi LAN created by the WRT54GC and we're good to go.

  Everything works very well and always, but with one exception: we normally use connection software Office Microsoft standard to logon remotely to our computers at home.  We use dyndns to update the IP address of the computer and were marketed in the House so that each computer is accessed through our home router when a query of the DRC between the use of this port forwarding port.

  However, all of a sudden we cannot Remote Desktop our personal computers through the WRT54GC.

  If we put the original computer used to access the router from the hotel directly to the connection to the local network, then there is no problem and that computer can successfully remote desktop, but once we put the router in the equation, we cannot do.

  Any thoughts?  It's certainly something about the configuration of the router, but I checked the firewall and DNS, and those who are not suspects.  The router configuration has not changed in recent years and has always worked previously.

  Any help appreciated.

  Thanks for the tip!

  We have recently started using logmein.com.  There is no charge for simple remote desktop, but the monitor resize and things is easier with it as the version of Microsoft, and for a small fee, you can activate on the management of files, allowing you to do things like file transfer between your home and remote computers easily.  I had tried to do in the past using DRC and it was too slow, but not also with logmein.com.

  That's why we have not been totally freak out the problem, because we had a backup solution with this product, but my husband has a phone in his office, he can connect to while overseas to make calls since in Australia (where we live) while he gets a charge local calls only, and it does not work with logmein , that is why we must get Microsoft DRC will once again!

  In any case, we use dyndns to administer a dynamic update of our IP address for our home router, is to make our computers at home and in a last ditch effort, I had a look at our account and re-joined our IP against our dynamic naming.  Hop, DRC said work again after that.

  It is most strange, because the IP listed was the good IP, but somehow it seemed temporarily do not resolve correctly.

  In any case, it's all fixed.

  At least, it was pretty obvious that it was something somewhere between the router and the House, because of the way he acted. It's usually pretty obvious when your home network has fallen... we knew that is that since we could communicate by other means.

  Thanks for the tip on the other remote tools.  I will certainly check.  There is never too much!

• WRT54GC and Synology DS107

  Hello

  I have a Linksys WRT54GC router and a Synology DS107, both on the latest firmware, but somehow the following things do work more (used to work with my DSL router)

  * Download directly from the Synology

  Being of a drive for laptop XP Edition mapping windows family

  Does anyone know a solution to this problem?

  Bram Vermeij

  Hello Bram

  Your DSL is connected to the WAN port on your LinkSys Router? Which port is your connected Synology NAS box?

  What kind of error do you get when you try to download from the Synology NAS box?

  What kind of error you get when you try to map a drive o the XP box?

  You know the IP address of the Synology box? If it responds to a ping?

  Have you power cycled anything? I suggest all tension, starting with the laptop, then Synology, then router and DSL. Feed their place in reverse, pause for 30 seconds before moving on to the next section.

  Good luck and please let us know how it goes.

• WRT54GC wireless problem

  Hello world

  I have wireless router WRT54GC. Recently I bought an iPhone and because the phone could not connect very well to my wifi I have updated the firmware on the router to v.1.05.7 (I used the download link to the Linksys site). Now, the phone connects fine but my laptop cannot connect to the network via a Wi - fi. When I try to connect, I see the laptop acquires network address and he keeps trying for a few minutes. After that, I see a message 'little or no connection '.

  My office is connected to the router and have no problem. The iPhone's wi - fi connection and the router is OK. But there is no connection for the laptop.

  I took the cable from the desktop and put it on the laptop and I had Internet access by cable. I was trying just different options. When I'm home cable to connect wi - fi office and I tried the laptop, it was the same thing. No internet access from your laptop. Here, the strange thing for me is that I have wifi (I can connect to Internet via wifi from the iPhone) but I can't connect using the laptop. I suspect that it happened after the update to the new firmware of the router.

  Any ideas how I could possibly fix this are greatly appreciated.

  Thanks in advance.

  BL

  Technical information:

  1 computer that is connected to the router

  1 laptop

  Both computers are running Windows XP

  I found something. Safety/safe mode wireless I had put the WPA2 mixed mode (that is, the router has been use WPA + WPA2). I changed it to WPA with AES encryption and I finally logged

  Of course, there is a problem when the security mode is WPA2. I played around with the settings and found each time when the security mode implies WPA2 (even when it's just about WPA2, not mixed WPA + WPA2) the laptop cannot connect to Internet. I think it is an issue that must be resolved by Cisco.

  I had no such problem with the previous firmware. Pretty sure that came with 1.05.7.

  Thanks for the help, amine.

• WRT54GC configure as WAP

  Hi all...

  Try to configure a WRT54GC as access point wireless for my school's network... I have an internet cable I plug generally on my computer I want to divide it into a number of wireless connections... Any help?

  Held reset for 10 seconds button.

  Pulled power cord.

  Reset to factory settings.

  Plugged into the ethernet LAN port.

  Enabled DHCP automatic allocation

  Turned off all security.

  No wworks.

  I've also limited the number of connections to 10, although this should not it stop working ^_^

• Desktop computer connected via a cable to a wireless router - can't print on Photosmart Wireless B109n-z

  Hello

  I have my desktop (Windows XP) connected via a cable to a LinkSys WRT54GC wireless router and wireless HP Photosmart B109n-z connected wireless. I can 'see' desktop printer if I write the IP address of the printer in the browser, but printing does not work.

  I don't know how to set up the printer to print from this desktop computer. What I choose when installing printer drivers (printing via USB or wireless?). I tried manually installing printer but without success. Do I have to set up specific ports?

  Printing from laptop (connected wireless to the router) works perfectly.

  Thank you in advance for your answer, I'm really lost on this one.

  Choose print wireless while installing the software.  Because the printer is connected to your router, you don't need to go through «setup USB wireless»

  I'll try to manually add again in this way:

  Verify that you can access the web page internal to the printer by its IP address.

  1. click on the 'Start' button--> printers and fax machines.
  2. under print jobs, click on "add a printer".
  3. click on 'Next' on the Add Printer Wizard window.
  4. Select "local printer attached to this computer. Deselect "automatically detect and install my Plug and play printer." Click "next".
  5 under, select a Printer Port option, select "Create a new port" and choose "Standard TCP/IP Port" and click "Next".
  6. in the "Welcome to the Add Standard TCP/IP printer port Wizard" make sure that the printer is turned on and connected to the same network that your computer is connected to. click on the button "next".
  7. under "Add Standard TCP/IP Printer Port" enter the IP address of the printer. Click 'Next' and then click 'Finish '.
  8. now select HP in the manufacturers list, select your printer in the list of the models of printers and click the button "next".
  9. If you can't find your printer, you will need to find the installation CD and use the 'Disc' option to select one of the files hp*.ini. You can also select another model of the same type HP printer.
  10. Add the name of print spooler, and then click "next".
  11. click on "next".
  12. click on "Next" and "Finish."

• Bluetooth connection problem iPhone - audio system Nissan after upgrade iOS10

  After iOS10.0.2 iOS9 on iPhone upgrade, I got a cordially problem receive calls raise Nissan car audio.

  I can make a call without any problem. Bluetooth connection is stable. I can download address book e.t.c. But I can't receive a call. I see the incoming call on the radio shows. After pressing the button "answer" on the car Audio System, audio between iPhone and Audio streams car breaks down.

  But the cellular connection remains active. I need to rotate the audio output on the screen of the iPhone car for iPhone and back to the car. After that, I can continue my call via the car radio.

  Thanks in advance

  Hello StasV,

  Thank you for using communities Support from Apple. I know having a problem with calls on your iPhone in your car, it's not what you expect. The good news is that these steps will be useful for your problem of phone calls while using the bluetooth in your car. Go to settings > general > accessibility > routing of Audio calls and the value headset/Bluetooth Headset and retest your question.

  Audio routing call - the iPhone user Guide
  Help to connect your iPhone, iPad or iPod touch with your car radio

  See you soon!