WUS600N drivers won't load at all!

Similar Questions

• OfficeJet 8500 A909a: Drivers won't load not

  I try to install my Officejet 8500 A909a (that I have connected to my wireless network) on my laptop. I go to the tab drivers and software, select the correct printer, and brings it to the top of the page where it is supposed to compile the list of drivers. The page says "HP is compile your results." It could take up to 3 minutes, depending on the speed of your computer and connection. Thank you for your patience. "The page has been loading for more than 30 minutes without any search results. I tried to add the printer in the "devices and printers". The printer is recognized by the laptop, but do not print due to not having a driver. Help! The printer works for all tablets and phones in the House, but not to a laptop!

  @AmandaHall

  Try to run this.

  HP printer install wizard for Windows

   

  http://ftp.HP.com/pub/softlib/software13/COL50403/MP-150580-2/hppiw.exe

  After that.

  HP Print and Scan Doctor

  http://ftp.HP.com/pub/softlib/software13/COL50849/MP-145514-3/HPPSdr.exe

  REO

• Generic USB Audio device drivers won't load

  I use a lenovo x 301.

  I am trying to connect to a series of musical instruments (keyboards and microsphones) to my laptop, nothing helps. Here are the relevant facts:

  -Devices all work on 6 other machines Windows 7 from a variety of types
  -The devices all use drivers generic "USB Audio Device". There is no specific drivers for these devices.
  -My USB seems to work - so the USB ports are mainly functional.
  -The friendly names of the devices are all identified
  -The .sys and .dll files that are used on the other 6 machines are present on the X 301
  -When I go into the Device Manager and try to manually choose the "USB Audio Device" driver - it is not available. I spent hours looking for it:-)

  I'm puzzled.

  Help :-(

  For any problem of security on NTFS drives:
  It is perhaps part of the problem.
  1. are you an administrator user
  2. set the permissions on your OS partition (such as drive C :) for all THAT YOU ARE Full
  ADMINISTRATORS/USERS/ComputerName/SYSTEM/all the WORLD (Finally, what you think you are)
  There is also maybe something like OWNER who you give special permissions and not full
  You must close the properties after each major change and then reopen to contunue
  Since you've done ADMINISTRATORS be the OWNER, this means you have FULL and SPECIAL permissions
  for all ADMINISTRATORS, who is the most possible freedom that I know.
  3. MAKING the OWNER of Admininstrators everything to implement (some things are still banned it seems)
  4. optionally run chech disc after that
  5. If everything starts after closing you can continue, but until you
  are able to stop cold iron and restart in normal mode from MSCONFIG
  you are experiencing serious problems that should be fixed first.

  TO THE PROBLEM OF USB:
  IT WAS DEFINITELY MY PROBLEM.
  NOTE: REMOVE ANY HARDWARE PLUGGED YOUR USB PORTS-CURRENT TEMP STUFF
  6. If you can't get the appropriate to load drivers or no response when you try to plud in USB cameras or MP3 players do the following
  A. GO TO THE VARIOUS WINDOWS FOLDERS;  INF (can be hidden); System32 AND SYSWOW64 (GOT A 64-bit system)
  B. RENAME all FILES THAT START WITH wpdxxxxx.inf/.pnf/.exe/.dll/.* in [CREDITS]. [GENERIC]. OLD
  in this way, you save the old files without destroying them (keep it forever or until of course you can remove/kill them)
  7. turn OFF your SYSTEM, wait 15 to 30 seconds
  8. RESTART your system (power on)
  9. WAIT UNTIL COMPLETELY AT THE START OF THE SYSTEM (DISK ACTIVITY LIGHT EXTIGUISHES)
  THIS may take several minutes like 10 or 15 minutes, and then you just see some small flashes of your player
  10. CONNECT any free USB port of your removiable disk devices
  11. you should now get a response from windows as if it were the first time you ever plugged

  NOTE: This was the only way I could solve this problem after days of playing with this problem
  There is no solution given by microsoft itself that will fix this error
  If this does not work for you the only solution I can think of will be to
  restore your system before the problem or reinstall the whole OS in the
  same Partition without disturbing one of your other partititions.

  IT seems to me that windows has installed a separate for each device WPD driver that connect
  USB and explains why all the various WPD files. So much happens there are programmers of knowledge
  to set correctly this question and thay simply not create decent error messages that will help
  You can set these things as a layman.

• Firefox won't load at all because of the ATL error message

  When I touched the Firefox icon and error message comes to say Uniode error AtL80.DLL and she even try to load because I can not get the error message to close. I have to shut my computer down and when he returns to the top, and then try again., the error message is rear right in the middle of the screen. Do not understand what has happened. Worked great until I got message to update Firefox and tried to install the upgrade.

  Do a clean reinstall and delete the program folder before Firefox to (re) install a new copy of the current version of Firefox.

  • Download the full Firefox installation program and save the file to the desktop
    https://www.Mozilla.org/en-us/Firefox/all.html

  If possible to uninstall your current version of Firefox to clean the Windows registry and settings in the security software.

  • Do NOT remove the "personal data" when you uninstall your current version of Firefox, because this will remove all profile folders and you lose personal data such as bookmarks and passwords including data profiles created by other versions of Firefox.

  Delete the program folder Firefox before installing newly downloaded copy of the Firefox installer.

  • (32-bit Windows) "C:\Program Files\Mozilla Firefox\"
  • (Windows 64 bit) "C:\Program Files (x 86) \Mozilla.
  • It is important to remove the Firefox program folder to delete all the files and make sure that there is no problem with the files that were the remains after uninstallation.
  • http://KB.mozillazine.org/Uninstalling_Firefox

  Your bookmarks and other personal data are stored in the Firefox profile folder and will not be affected by a uninstall and (re) install, but do NOT delete personal data when you uninstall Firefox which removes all Firefox profile folders and you lose your data.

  If you keep problems also create a new profile.

  • http://KB.mozillazine.org/Profile_folder_-_Firefox
  • http://KB.mozillazine.org/Profile_backup
  • http://KB.mozillazine.org/Standard_diagnostic_-_Firefox#Clean_reinstall

• After a breakaway of electric failure does not start, or I can boot from the cd that the drivers won't load

  I get the logo and the system beep.  Seems to hang for about 2 minutes then tricking black screen reboot and select proper boot device or insert boot media in selected boot device and press a key.  When I insert the dvd-rom supplied with the pc recovery, it takes about 4 minutes for so-called load windows and off to install windows for me.  No matter what I select, I'm only able to download the drivers that may be defective and then find and I can retry or cancel.  If I try again once I get the same cycle but I can't get into windows, nor can I access any of the disk recovery tools.  I can't enter the Bios or any other file.  I tried power market and stop and start cold without result.  The pc was in hibernation because of non-use, but had been shut down when the crash occurred.  It is on a surge protector.  I could really use some help and appreciate suggestions - I'm a little computer but certainly not a tech guru.   Thanks for any help.

  Hello

  ·         What is the brand and model of the computer?

  ·         What exactly happens when you turn on the computer?

  ·         You get the error message?

  If you are not able to boot in the BIOS there is a problem with the hardware. I suggest you contact the computer hardware manufacturing for this problem.

  Also check out the link below and check if it helps:

  What to do if Windows does not start correctly

  http://Windows.Microsoft.com/en-us/Windows-Vista/what-to-do-if-Windows-wont-start-correctly

• Windows 8 update won't load

  My computer Windows 8 acted as weird after I have updated to 8.1 that according to me. Windows Movie Maker does not recognize the files that it used to recognize. My Google Chrome acted a lot, just like my files. But the worst is that I can not reset my computer to factory settings to solve this problem. When I try to reset it to factory settings, it just says, "no changes."

  It is very frustrating and so now I have to see if my computer update will fix all this. My computer tells me that I am due for an update when I login, but when I go to

  Settings PC > Windows Update

  The Windows Update screen will load, load and load and I'll it let it charge for hours and hours, but it keeps loading. Never, he shows me the update I need. There is also no error code for the update because it won't load at all.

  It's frustrating because I don't understand why I can't reset my computer completely or update. I did the research for hours and hours to solve this problem and I became irratible trying to fix computers.

  I think that all this comes from the update and I can't fix it. I had a lot of people try and fix it, but usually, I'm able to fix computers or searching for the answer to fixing it, but not this time.

  If someone knows the solution to this problem, feel free to respond. I ended up getting tired of all these questions and I don't know what else to do.

  Thank you.

  Hi Kaitlyn,

  I imagine the inconvenience that you are experiencing. We are here to help and guide you in the right direction.

  To better understand the issue, I would need more information on your side.

  1. What is the number of brand and model of the computer? (So that I can help you find the device drivers on the site of computer manufacturer)

  2. what measures all troubleshooting have you tried?

  This problem might have occurred because of these reasons:
  1. lack of Windows updates.
  2. If the device drivers are not updated.
  3 corrupt system files.

  Before you start the troubleshooting steps allows you to download and install the latest device drivers for all devices in the computer manufacturer's website. Check if it helps. If the problem persists, try the steps listed here and see if it helps:

  Method 1:
  I suggest you to reset components Windows Update, which fixes corrupted Windows Update components and help you install Windows updates.
  

  How to reset the Windows Update components?
  http://support.Microsoft.com/kb/971058

  Note: This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the the Microsoft Knowledge Base:

  
  Method 2:
  If the problem persists, I suggest to start the computer in Mode safe mode with network and check if the problem persists or not. If the problem does not occur in Mode safe mode with networking, you can set up your computer in a clean boot and check if it helps.

  
  Step 1:
  Start the computer in safe mode with network. In Safe Mode with networking starts with a minimal set of drivers and files.

  Start settings for Windows (including safe mode)
  http://Windows.Microsoft.com/en-us/Windows-8/Windows-startup-settings-including-safe-mode

  If the problem does not occur in safe mode with network, try step 2:

  Step 2:
  Set up your computer in a clean boot state. Setting the system in a clean boot state will help you determine if third-party applications or startup items are causing the problem.

  How to perform a clean boot in Windows
  http://support.Microsoft.com/kb/929135

  Note: After the clean boot troubleshooting steps, see the "How to reset the computer to start as usual after a clean boot troubleshooting" section in the link provided to return the computer to a Normal startup mode.

  
  

  Method 3:
  If the problem persists, you can run the audit and the auditor of file system (CFS) tool if this solves the problem. SFC scan would be a system file corrupt on the computer search and replace.

  How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7
  http://support.Microsoft.com/kb/929833

  Hope this information helps. Reply to the post with an up-to-date report of the issue so that we can help you further.

• All of a sudden my Elements 7 won't load all the video files not saying not supported

  Suddenly my Elements 7 won't load all the video files saying not supported, I rebooted, uninstalled and reinstalled but it refuses to work any ideas please

  If you are video comes from a Hi8 camcorder, then it is analog, which has been digitized. And how and what facilities allowing you to scan this video may be important. But, since you say that you have changed this video before in Premiere Elements without a problem, I'll assume this isn't the question at the moment - although it could certainly be. Especially since you use a such relatively old version of Premiere Elements, one that requires you to manually configure your project.

  In fact, try to download the trial version of the latest version of Premiere Elements and see if you experience the same problem. The current versions of the program are many more automatically and are capable of managing a much wider range of video file formats. You don't have to buy the program. Just try free trial and see if you still experience the same problems.

  If nothing else, install the trial version 14 version COULD even repair what has been damaged in your codec library, if that's your problem in version 7.

• My toshiba satellite won't load my new battery, or former

  ORIGINAL TITLE: battery

  My toshiba satellite won't load my new battery, or the old, the icon shows activity concluded for a few seconds then it stops

  Hello

  References to Vista also apply to Windows 7.

  Check with support from the manufacturer of their books online and the drivers and their forums system
  (as applicable) for known issues. Some manufacturer issued BIOS and other updates to help the battery
  problems.

  Toshiba - Forums
  http://laptopforums.Toshiba.com/

  Toshiba - Contacts
  http://www.CSD.Toshiba.com/cgi-bin/TAIS/support/JSP/navShell.jsp?CF=su_contact

  Toshiba - drivers - access your model
  http://www.CSD.Toshiba.com/cgi-bin/TAIS/support/JSP/home.jsp?NAV=download

  Toshiba - Support
  http://www.CSD.Toshiba.com/cgi-bin/TAIS/support/JSP/home.jsp

  ================================================================

  Follow these steps to remove corruption and missing/damaged file system repair or replacement.

  Run DiskCleanup - start - all programs - Accessories - System Tools - Disk Cleanup

  Start - type in the search box - find command top - RIGHT CLICK – RUN AS ADMIN

  sfc/scannow

  How to fix the system files of Windows 7 with the System File Checker
  http://www.SevenForums.com/tutorials/1538-SFC-SCANNOW-Command-System-File-Checker.html

  Then run checkdisk (chkdsk).

  How to run check disk in Windows 7
  http://www.SevenForums.com/tutorials/433-disk-check.html

  =================================================================

  Other information that might help:

  Control Panel control - plan change Options - power plans - power - advanced settings
  Parameters for the drainage and the use of parameters (this is how much to use and not how much or how)
  long to load).

  In fact, what causes a lot of wear on a battery empties it too low on several occasions. With today
  systems overload are not a problem.

  Here are some tips to help and troubleshoot battery issues.

  Old battery? Unplug the power to the computer - remove the battery and clean the contacts with a pencil
  eraser (do not use this, if your battery is fine slots - just clean up the edges of the knife which fit in)
  them and be careful). Batteries are old, or it could be a problem with the computer.
  Check with the support of the machine system, and many of them have online forums.

  New Lithium-Ion type battery usually last longer if you do not unload their less than 30%
  However on a laptop that not extend their life a lot. Best is to use the a/c adapter
  When this is possible.

  I use the free version of BatteryBar to monitor my battery. Click on the green button on the
  Yellow box on the right side of the page to download the latest stable version.

  BatteryBar - free version available
  http://osirisdevelopment.com/BatteryBar/index.html

  Another good program

  Vista battery saver - free
  http://www.codeplex.com/vistabattery

  Problems with the lives of its use and the battery of power - Mr Fixit
  http://support.Microsoft.com/GP/windows_battery_power_settings

  You can also check with the manufacturer of system and forums that many use their own
  proprietary software to monitor the battery and they could be known problems with your battery.

  ============================================================

  Taking care of your laptop battery
  http://Windows.Microsoft.com/en-us/Windows7/taking-care-of-your-laptop-battery

  Battery meter: frequently asked questions
  http://Windows.Microsoft.com/en-us/Windows7/battery-meter-frequently-asked-questions

  Battery saver
  http://Windows.Microsoft.com/en-us/Windows7/conserving-battery-power

  Solutions to common battery problems
  http://Windows.Microsoft.com/en-us/Windows7/solutions-to-common-battery-problems

  What is the precise the battery meter?
  http://Windows.Microsoft.com/en-us/Windows7/how-accurate-is-the-battery-meter

  ============================================================

  Try this - to make a Restore Point

  How to create a System Restore Point in Windows 7
  http://www.SevenForums.com/tutorials/697-system-restore-point-create.html

  How to do a system restore in Windows 7
  http://www.SevenForums.com/tutorials/700-system-restore.html

  Then Control Panel - Manager of devices - Batteries - Double click on each item - drivers - tab
  Update the drivers (which can do nothing) - then do a right click and UNINSTALL each - RESTART
  who will update the driver stacks.

  Problems with the lives of its use and the battery of power - Mr Fixit
  http://support.Microsoft.com/GP/windows_battery_power_settings

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="" -="" mark="" twain="" said="" it="">

• Some projects won't load does not, first Elements 4

  At first, my projects worked very well. I was in the middle of working on a particular project before decide me, ' Hey, we're going to upgrade the computer!

  Now, some projects simply won't load. I click on the project, and all I get is a blackened by window with the text "user interface initialization" below left. It never initializes.

  It is when I have the chance. Sometimes, all crashes with just a few "the first meeting with a serious error." It does not freeze, cause the program is able to create a backup before its closure, so I think that there is some kind of conflict. But for the life of me, I can't understand it.

  The only thing that is changed from then to now is I now version 64-bit instead of 32-bit windows. Graphics card is the same, the memory is the same, everything is the same. That's all just a new installation of windows.

  It cannot be just a general incompatibility, because some projects take very well. It's completely random those who, although they tend to be small. (a few small projects is loading)

  I had to reinstall first but who usually solves problems not create.

  Some things I've tried:

  Clear cache

  Removal of the preferences

  Relocation of

  Disable hardware acceleration

  programs to disable my anti virus (AVG and Spybot 2.0)

  Compatibility mode for Windows XP service pack 2 AND 3

  Give administrator privileges

  It is the only open application

  politely asked

  This software has been my companion software edition for years. I need to understand what got so weird since the 64-bit update.

  Specifications of the computer:

  Radeon 6670

  8 GB memory

  Windows 7 64 bit

  Processor Intel i5 3401

  ASUS Micro-ATX Motherboard

  All my drivers are up to date. Quick time is updated. Flash is up to date. The Cree program open when the draft takes over and works like a charm. So, what gives?

  Red truck inc.

  I have the first Elements 4 in Windows 7, 8 and 8.1 64bits. No problems. In the properties/Compatibility tab, I leave "run this program in compatibility mode for" unchecked. I have to right click on the first Elements 4, select run as administrator, even though I have worked for a user with the privileges of the administrator account. Then, focus on the angle of permissions a little more.

  With the thought of the possible remains of incomplete install or reinstall, you did just uninstall, ccleaner Cross (parts regular and register of vacuuming), reinstall?

  Is this video card Radeon 6670 only video card that has the computer? Are you on any network? Do you run a system single or dual monitor on your Windows 7 64 bit?

  Just some thoughts for now.

  Later.

  RTA

• Satellite Pro P200 - 17 c: Win XP won't load - installation of the SATA driver

  Hello

  I have a satellite pro p200 - 17 c I've had good years, allways worked without any problem.

  Last week when I booted the laptop, windows won't load and I find myself safe mode selection screen. No options whatsoever me to windows loading, I tried F8 and still nothing.

  I tried the restore cd that reimagee the drive but I get the same thing, I tried a new hard drive, once again the same.

  But if I try to load windows from an OEM to install that software does not because it is a sata drive and there is no floppy drive. I have an external floppy drive I use, but it is not known now.

  Any ideas or suggestions?

  Hello

  Go to BIOS and set it to default settings.

  In this case the SATA mode must be on AHCI. In this case the SATA drivers are required to install the Windows operating system. But as much as I know that Windows 7 already contains the SATA drivers if usually you don t had to add SATA drivers while OS installation the installation program.

  However, here is a nice HowTo document that helps you add SATA drivers for Win XP installation disc.

  + How to integrate a SATA AHCI driver into a Windows XP Setup CD.
  http://APS2.toshiba-tro.de/KB0/TSB85017Z0000R01.htm

  + How to integrate the AHCI driver during the installation of Windows XP.
  http://APS2.toshiba-tro.de/KB0/HTD9401AN0000R01.htm

• Satellite Pro 2100 won't start at all - LED flash

  My SP2100 began to have feeding problems and now won't start at all. The AC adapter green LED is lit, that are relevant lights on the body of the laptop (although the "battery charge" light always orange these days). When I try the switch on, startup begins (in fact succeeded on occasion until this morning), however the battery indicator and the adapter lights are flashing, and everything stops again.

  On the rare occasions when I'll be past this stage, lights blinking, and the system soon shuts down again with a screen message "low battery." Until this morning, he would sometimes settle, the computer remained on, and the lights showed a State of equilibrium as usual.

  Initially I thought that the problem was of course the battery or the AC adapter, but now I'm starting to think that it is with internal PSU of the laptop (although I suspect the battery is probably tour after all this part of loading and unloading).

  Any ideas?

  Hello

  I think you're right. Flashing LEDS are a sign that hardware is defective.
  I can't say what exactly is the problem, this should be verified by a technicain.
  On the other side I don't know if it's worth to repair such an old machine.

  Good bye

• Hi, does anyone know how to get my sony vaio bluetooth works please, I tried to update etc, but he won't find not all bluetooth devices.

  Hi, does anyone know how to get my sony vaio bluetooth works please, I tried to update etc, but he won't find not all bluetooth devices.

  Hello

  Check with the support of Sony as their problems, driver updates, other reasons could known BlueTooth
  is not functional or taken in charge.

  Sony - Contacts
  http://eSupport.Sony.com/us/Perl/contact-land.pl

  Sony - drivers
  http://eSupport.Sony.com/Perl/select-System.pl

  Sony - Support
  http://eSupport.Sony.com/

  =====================================

  If bluetooth is supported on your model that these could help.

  Hardware devices not detected or does not work - a Mr Fixit
  http://support.Microsoft.com/GP/hardware_device_problems

  The problems with Bluetooth devices
  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-problems-with-Bluetooth-enabled-devices

  Set up a Bluetooth compatible device
  http://Windows.Microsoft.com/en-us/Windows-Vista/set-up-a-Bluetooth-enabled-device

  The problems with Bluetooth devices
  http://207.46.197.98/Windows/en-in/help/11a74104-645D-40D4-b933-bde5d15537bb1033.mspx

  How to set up a Bluetooth connection
  http://www.vista4beginners.com/how-to-setup-a-Bluetooth-connection

  The Bluetooth item in Control Panel on a Windows Vista SP2 computer does not
  as expected when you click on the element - for Windows 7 this check manually
  http://support.Microsoft.com/kb/960531/en-us

  If you need drivers try the support site for the manufacturer of your system and/or the site of the manufacturer of the real device.

  BluetoothView is a small utility that runs in the background and monitor the activity of Bluetooth technology
  devices around you. For each detected Bluetooth device, it displays the following information:
  The device name, address Bluetooth, Major Device Type, minor device Type, first detection time,
  Last detection time and more. BluetoothView can also warn when a new Bluetooth device
  is detected, by displaying a balloon in your bar tasks or playing a little beep. -FREE
  http://www.NirSoft.NET/utils/bluetooth_viewer.html

  BluetoothCL is a small console application that transforms all differential of bluetooth devices detected in
  the standard output. For each Bluetooth device, the following information is displayed: MAC
  Address, name, Major Device Type, minor device Type and possibly the name of the company of
  the device (if the external file of MAC addresses - oui.txt is provided) - FREE
  http://www.NirSoft.NET/utils/bluetoothcl.html

  ---------------------------------------------------------------------

  Add a Bluetooth device to your computer
  http://Windows.Microsoft.com/en-us/Windows7/add-a-Bluetooth-enabled-device-to-your-computer

  Add a Bluetooth device or other wireless or network device: frequently asked questions
  http://Windows.Microsoft.com/en-us/Windows7/add-a-Bluetooth-or-other-wireless-or-network-device-frequently-asked-questions

  ---------------------------------------------------------------------

  More information of possible interest to some:

  What is a Bluetooth personal area network (PAN) network?
  http://Windows.Microsoft.com/en-us/Windows-Vista/what-is-a-Bluetooth-personal-area-network-Pan

  Connect to a Bluetooth personal area network (PAN) network
  http://Windows.Microsoft.com/en-us/Windows-Vista/connect-to-a-Bluetooth-personal-area-network-Pan

  I hope this helps.

  Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

• Won't start at all. just a black screen. Only the satrts upward on safe mode

  Won't start at all. just a black screen. Only the satrts upward on safe mode

  Restore point:

  Try typing F8 at startup and in the list of Boot selections, select Mode safe using ARROW top to go there > and then press ENTER.

  Try a restore of the system once, to choose a Restore Point prior to your problem...

  Click Start > programs > Accessories > system tools > system restore > choose another time > next > etc.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

   

  If restore work not and you do not have a Vista DVD from Microsoft, do a repair disc to do a Startup Repair:

  Download the ISO on the link provided and make a record of repair time it starts.

  Go to your Bios/Setup, or the Boot Menu at startup and change the Boot order to make the DVD/CD drive 1st in the boot order, then reboot with the disk in the drive.

  At the startup/power on you should see at the bottom of the screen either F2 or DELETE, go to Setup/Bios or F12 for the Boot Menu.

  When you have changed that, insert the Bootable disk you did in the drive and reboot.

  http://www.bleepingcomputer.com/tutorials/tutorial148.html

  Link above shows what the process looks like and a manual, it load the repair options.

  NeoSmart containing the content of the Windows Vista DVD 'Recovery Centre', as we refer to him. It cannot be used to install or reinstall Windows Vista, and is just a Windows PE interface to recovering your PC. Technically, we could re-create this installation with downloadable media media freely from Microsoft (namely the Microsoft WAIK, several gigabyte download); but it is pretty darn decent of Microsoft to present Windows users who might not be able to create such a thing on their own.

  Read all the info on the website on how to create and use it.

  http://NeoSmart.net/blog/2008/Windows-Vista-recovery-disc-download/

  ISO Burner: http://www.snapfiles.com/get/active-isoburner.html

  It's a very good Vista startup repair disk.

  You can do a system restart tool, system, etc it restore.

  It is NOT a disc of resettlement.

  And the 32-bit is what normally comes on a computer, unless 64-bit.

  See you soon.

  Mick Murphy - Microsoft partner

• BlackBerry Curve 8520 Smartphone won't turn on all the way, please help!

  I have a blackberry curve 8520, I bought last month some time.

  I woke up yesterday morning and the balckberry was off and not turn on after that I pushed down on the button. So I loaded for some time, and yet, it wouldn't turn on. Then I took off the charge it, took out the battery, put the battery back and it restarts. The loading bar went well in the end, and my ISP logo appeared. And that's when he stopped loading. All that will show is the logo, it does turn off, unless I get out the battery again.

  I had downloaded an application the previous evening, he stopped working out appworld, which could affect it? I tried to connect it to my computer, but it won't let me delete or add applications.

  I take out the battery for hours and the SD card. He still wiil only turn on until my ISP logo.

  Help, please! Any advice would be helpful.

  (1) make sure that you have Blackberry Desktop Manager installed.
  http://NA.BlackBerry.com/eng/services/desktop/
  (2) on your PC, go to start > run and copy and paste the following line exactly (i.e. with quotation marks):

  'c:\program files\common research in motion\apploader\loader.exe' /nojvm

  (3) the Application Loader Wizard will appear - click on "next".
  (4) in the ' connection: ' drop-down menu, you should see "USB - PIN: UNKNOWN". Click on the button "next".
  (5) you should see a list of applications ready to be installed for your Blackberry. Press Next and finish, and that you are well on your way to get your Blackberry to life. Congratulations! Just unplug and let the process finish completely.

  NOTE: If you do not display the list of applications mentioned in step 5 and instead to see the message "the Blackberry Desktop Software has no Blackberry Device Software for the device you have connected to the computer. Contact your wireless service provider or system administrator', then you must download the Blackberry operating system for your support and your device.
  http://www.BlackBerryFAQ.com/index.php/BlackBerry_Operating_System_Downloads
  Just select the appropriate type of carrier and network, select your Blackberry model from the list and download the latest version. Install this download and follow the steps above again and you should be on the right track.

• I installed Safari 10 update and now Safari won't load - ideas?

  I installed Safari 10 update and now Safari won't load - ideas?  In addition to the menu drop down go to preferences do not load.

  Writing an effective question of communities to Support Apple - https://discussions.apple.com/docs/DOC-5931