X140e why it is so slow

Similar Questions

• Why the update did slow my MacBook pro down so

  Why the update did slow my MacBook pro down so much? What could be in the last update of El Capitan to slow my Mid 2010 GHz Intel Core 2 Duo Macbook Pro 2.66 down so much?   He has never run it slow before! Everything takes more time in all areas. Could I have made a mistake during the download and installation?  If so is it possible to force a re - install the latest update?

  I don't know if I can restore back after an update of this size. Everyone has similar problems or have thoughts on what could be wrong? I know it's far from being a State of the art Macbook Pro. But it was working fine before the update.

  Any thoughts would be really appreciated. I can't afford to buy anything newer right now.

  Thank you

  Ron Genovesi

  HMBGENO

  Things you can try to solve this problem:

  1 https://support.apple.com/kb/PH21875?viewlocale=en_US & local = en_US

  Start in safe mode and then restart.

  2. How to reset the NVRAM on your Mac - Apple Support

  Reset the NVRAM.

  If this does not help, download Etrecheck, a report and view the results here.

  http://etrecheck.com

• Is the another great category why my computer is slow?

  I get a lot of beach and the General slow balls spinning this month.

  One thing I checked last week my storage status. 237 free GB to 999 GB and 618 for which is the category "other"!  I hate this wave "other" category. Here is a screenshot.

  

  You can see that I have barely keep anything on my internal drive. I don't have a lot of applications. The ones I use regularly is Mail, Safari, Lightroom and Photoshop.

  A few years ago I learned about a procedure in disk utility to completely erase the disk space, but when I went to do, I couldn't find more, as El Capitan got rid of him. Is there something similar I can do?

  Is this large amount of yellow on the bar as alarming as it looks and probably why my computer is slow?

  Thank you!

  p.s. in another thread, I will post about a glitch that happens with my trash. Maybe it's related.

  The function of Secure Erase of Trash was removed to El Capitan. One of the reasons was that it worked as expected. The other is that it reduces the life expectancy of the SSD.

  I would suggest your download and install OmniDiskSweeper. When you rum ODS, it will tell you the names of the files and folders that use the most space. You can then decide for yourself or ask us what can be detected or moved.

  The first step in the process must be a full backup of everything.

• Why my computer is slow with 80 GB and no virus

  Why my computer is slow with 80 GB and no virus

  Hello

  What antivirus/antispyware/security products do you have on the machine? Be one you ALREADY had on this
  machine, including those you have uninstalled (they leave leftovers behind which can cause strange problems).

  ----------------------------------------------------

  Follow these steps:

  Start - type this in the search box-> find COMMAND at the top and RIGHT CLICK – RUN AS ADMIN

  Enter this at the command prompt - sfc/scannow

  How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
  generates in Windows Vista cbs.log
  http://support.Microsoft.com/kb/928228

  Also run CheckDisk, so we cannot exclude as much as possible of the corruption.
  How to run the check disk at startup in Vista
  http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html

  ==========================================

  After the foregoing:

  How to troubleshoot a problem by performing a clean boot in Windows Vista
  http://support.Microsoft.com/kb/929135
  How to troubleshoot performance issues in Windows Vista
  http://support.Microsoft.com/kb/950685

  Optimize the performance of Microsoft Windows Vista
  http://support.Microsoft.com/kb/959062
  To see everything that is in charge of startup - wait a few minutes without doing anything - then right click on the task - bar
  The task manager - take a look at stored by - Services - process - it is a quick reference (if you have
  a small box in the lower-left - show for all users can check only).

  How to check and change Vista startup programs
  http://www.Vistax64.com/tutorials/79612-startup-programs-enable-disable.html

  A quick check to see that load method 2 is - using MSCONFIG and then display a list of the people here.
  --------------------------------------------------------------------

  Tools that should help you:

  Process Explorer - free - find out what are the files, registry keys and other objects processes have opened, the dll
  they loaded and much more. This exceptionally effective utility will show you even owned by each process.
  http://TechNet.Microsoft.com/en-us/Sysinternals/bb896653.aspx

  Autoruns - free - see what programs are configured to startup automatically when your system boots and you
  opening of session. Autoruns also shows you the full list of registry and file locations where applications can configure auto-
  start the settings.
  http://TechNet.Microsoft.com/en-us/sysinternals/bb963902.aspx
  Process Monitor - Free - monitor the system files, registry, process, thread and DLL real-time activity.
  http://TechNet.Microsoft.com/en-us/Sysinternals/bb896645.aspx

  There are many excellent free tools from Sysinternals
  http://TechNet.Microsoft.com/en-us/Sysinternals/default.aspx

  WhatsInStartUP - free - this utility displays the list of all applications that are loaded automatically when Windows
  starts. For each request, the following information is displayed: Startup Type (registry/Startup folder).
  The command - line String, product name, file Version, company name, location in the registry or the file system,
  and much more. It allows you to easily disable or remove unwanted programs that runs in your Windows startup.
  http://www.NirSoft.NET/utils/what_run_in_startup.html

  There are many excellent free tools to NirSoft
  http://www.NirSoft.NET/utils/index.html

  Window Watcher - free - do you know what is running on your computer? Maybe not. The window Watcher says it all, reporting of any window created by all running programs, if the window is visible or not.
  http://www.KarenWare.com/PowerTools/ptwinwatch.asp

  Many excellent free tools and an excellent newsletter at Karenware
  http://www.KarenWare.com/

  ===========================================

  Vista and Windows 7 updated drivers love then here's how update the most important.

  This is my generic how updates of appropriate driver:

  This utility, it is easy see which versions are loaded:

  -Free - DriverView utility displays the list of all device drivers currently loaded on your system. For
  each driver in the list, additional useful information is displayed: load address of the driver, description,.
  version, product name, company that created the driver and more.
  http://www.NirSoft.NET/utils/DriverView.html

  For drivers, visit manufacturer of emergency system and of the manufacturer of the device that are the most common.
  Control Panel - Device Manager - Display Adapter - note the brand and complete model of your
  video card - double - tab of the driver - write version information. Now click on UPdate Driver (this
  cannot do anything as MS is far behind the certification of drivers) - then do a right click - Uninstall - REBOOT
  This will refresh the driver stack.

  Repeat this for network - card (NIC), Wifi network, sound, mouse, and keyboard if 3rd party with their
  own the software and drivers and all other main drivers that you have.

  Now go to the site of the manufacturer of system (Dell, HP, Toshiba as examples) (restoration) and then of the manufacturer of the device
  (Realtek, Intel, Nvidia, ATI, for example) and get their latest versions. (Look for the BIOS, Chipset and software)
  updates on the site of the manufacturer of the system here.)

  Download - SAVE - go to where you put them - right click - RUN AD ADMIN - REBOOT after each installation.

  Always check in the Device Manager - tab drivers version you install actually shows up. This
  because some restore drivers before the most recent is installed (particularly that audio drivers) so install a
  pilot - reboot - check that it is installed and repeat if necessary.

  Repeat to the manufacturers - BTW on device at the DO NOT RUN THEIR SCANNER - manually check by model.

  Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
  http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

  How to install a device driver in Vista Device Manager
  http://www.Vistax64.com/tutorials/193584-Device-Manager-install-driver.html

  If you update the drivers manually, then it's a good idea to disable the facilities of driver in the Windows updates,
  This leaves ONE of Windows updates, but it will not install the drivers who are generally older and cause
  questions. If updates offers a new driver and then hide it (right click on it) and then go look for new ones
  manually if you wish.

  How to disable automatic driver Installation in Windows Vista - drivers
  http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
  http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspx

  Hope these helps.

  Rob - bicycle - Mark Twain said it is good.

• Why Muse runs incredibly slow?

  Muse is incredibly slow... I'm working on a very simple site... the file is only 9.3 MB. No idea why it runs so slow? I use a trial version of Muse because I want to see how it behaves and if she could be a good purchase for me, but if it runs it slow I don't know if I want to buy it...

  Specifications of the computer:

  16 GB of ram

  CPU AMD Phenom II X 6 1090 t. (3.20 GHz)

  Windows 7 Ultimate

  I'm not really a player... I does not play well some Starcraft. One of my friends helped me to build myself a computer.

  Thanks for all the suggestions. I checked for malware. There were about a quarter of an inch of dust on the heatsink that was on my processor so after I removed which helped A LOT. The Muse is still wobbly, so I just rebuilt from zero and no problems so far. He must have gotten corrupted somehow.

• Why is it so slow Firefox! It takes 10 minutes to load, then 5 minutes to change between different pages. I have version 22, it is getting worse.

  It seems the newer version of Firefox, it gets the slower. What is the BEST version to download to use? This used to be a fast browser, now it takes 10 minutes to load. I did all this mentioned on the historic authorized help page, hides, scanned the computer, deleted Firefox and reinstalled, but it does not work.

  Chrome runs circles around Firefox, it will load in 10 seconds approximately and will work in MANY games better Firefox - using games is totally impossible with Firefox. I need to know which version is the fastest and has the best notes. It looks newer, it gets, the worse it works.

  Help!

  I have the same problem with Firefox 25.0.1. It happened months and I'm tired of it. I can't even watch a video in Firefox - YouTube or something - because it is always too rough. I don't have this problem with Chrome or Opera. And Chrome is lightning fast.

  I won't try Firefox in Mode without failure. Why should I? I will not uninstall other browsers, remove plugins (I don't really have a lot and they work very well in Chrome and Opera), or remove a file called User.js, if I have it. It is a bunch of nonsense. Firefox 25.0.1 works, or is not, without having to do all these things. So, I do not use Firefox any longer.

• Why my iMac run slower after upgrade to El Capitan?

  Why is my iMac (27 inch, mid 2011) (processor 3.1 GHz Intel Core i5, memory 8 GB 1333 MHz DDR3, chart AMD Radeon HD 6970 M 1024 MB, GB 999,35 885,37 GB free storage capacity) slow start when you turn on the computer and run more slowly since upgrading my OS to OS X El Capitan 10.11.4 version?

  Download EtreCheck and post the report.

  

• Why is firefox so slow sence I upgraded to 4.0?

  my pc has a great until I installed the upgrade and now it is slower than ever... why?

  You are welcome.

  May you click on the button 'Resolved' Please as it is added to the database to help others?

  Thank you.

• Update of the firmware r7000 - when, why it is so slow?

  Hi, after that the defective v1.60 firmware was pulled from the server left with an obsolete feature missing in version 1.40.

  I wonder:

  1. When to expect a new fixed version to be released?
  2. Why support firmware for the 'old' models is so painful slow when most users use these devices?
  3. If Netgear wants to 'force' costly when hardware upgrades older routers could do the same job perfectly well.

  Very frustrating!

  Hi James,

  I would mark this as my accepted solution but it won't since I haven't started this topic.

  The update of this beta version (1.0.5.62) was a good choice for me. I continue to experience a small fluctuation in speed with the channels 2.4 ghz but now it is acceptable.

  Since I have configured the router when bought automatic update of firmware how to change that if it is not so I have the same problem when

  He forced the 1.0.6.28 that messed up the speed and stability, I'm one who before 1.0.5...

• Why is it so slow on Satellite A300 PSAG8E SSD

  Hi, guys

  Please help me with the following question. I would like an admin to help me please, or someone very experienced, if possible.

  2 weeks ago, I bought a Satellite A300 PSAG8E. A couple of months before the purchase of this laptop, I had also bought a disc SSD OCZ 64 GB core series v2. I tried several times to install the SSD drive on the laptop, but the answer during the installation of windows and after that when using, the reader response is very, very slowly. It is still slower than with its original 250 GB drive. I compared the SSD with SISOFT SANDRA and confirmed my impression.

  The SSD was assessed at 5400 RPM, strangely the same speed as the original HD 250 GB supplied with the machine.
  I've used different windows CD (including one with SP3) and earlier with SP2, the two original windows, but nothing has changed. I then installed my SSD on my desktop computer and installation and use in the windows environment, is incredibly fast. I put it on the laptop and it's still very, very slowly.

  What is going on? Do you have any suggestions? Y at - it a bug using the SSD on my model?
  Y at - it a firmware update?
  I think it has something to do with the transfer rate of the laptop. Can you help me please?
  What can I do?

  Kind regards
  Dionisis Falireas

  Hello

  May I ask how you installed the Windows XP operating system on this new SSD?

  As suggested above the SATA drivers must be installed or included in the Win XP operating system.
  The SATA drivers are located in the Intel Matrix Storage Manager.
  The package contains the necessary drivers and theses drivers allow you to use the full capacity of SATA controller.
  Intel Storage Manager can be downloaded from the page of Toshiba and Intel page.

  By the way; It seems that the OCZ 64 GB SSD supports SATA II but I m quote do not know if your A300 supports SATA II or SATA only.
  If it supports only SATA, then this might be the reason why your SSD does not work with the best performance.

  Good bye

• Why is it so slow FPGA?

  Hi, I am fairly new to real-time and FPGA programming.  I read a lot about speed problems, such as some modules slows the rest unless you use their own lines, and using fifo to move data more quickly.

  But for now, I'm just a simple reading and a simple LED control.  If you look at my code that I have attached, you will see the readings in a loop and the LED control in its own loop.  I have the LED just turn every 1/2 second. (The counties of ticks are set to mSec, 8 bit)  But when the code is running on my FPGA, the LED flashes only every other 12.5 seconds.  It's basically 25 times slower than expected.

  I also have a counter tick sending its value to my code in real time, which also has its own meter of ticks, and both are to get connected.  When I look at the counter of the two side by side tick data, it shows time to counter tick in real-time is perfect, but the fpga tick counter time is way slower.  It ends up being 25 times slower.

  Why the FPGA reports that it runs so slow?  It's going slowly? Or is the meter tick does not properly? I understand how it works?  Although there are more slow IO modules causing the fpga to run more slowly, the counters of the tick must still report the right to the exact time?

  What is possibly sense as to why I get this behavior?

  Thank you

  JES-

  Hey Jes,

  In view of these figures, I think what have seen you, it is correct. Assuming a 40 MHz clock, the calculation is:

  500 Mticks / 40 Mticks/s = 12.5 sec.

  The 32-bit parameter does not affect the behavior of timing, he controls just what tick counter height can go without flipping.

  Jim

• Why Windows 7 extremely slow on your laptop just multitasking ordinary?

  Okay, so it is a mystery to me. I'm a tech guy, btw.

  The scenario: I use a little old laptop with 2 GB of RAM. Have virtual memory turned on,

  In ADDITION, have a very fast USB plugged into USB 2.0 and implemented with 4 GB ReadyBoost.

  Using Windows 7 and this notebook can handle.

  Normally, the laptop works very well and is sensitive with place for 4-5 open applications. However, recently,.

  When I open several pages in a browser, it will slow down abruptly to the point where it takes 30-60 seconds

  Press the close button on a page and see my click and everything is not responding. I'm not talking about slowing down a bit,

  I want to talk about a sharp slowdown in the overall system which lasts 10 to 20 minutes, until what I managed to close some windows,

  each takes about a minute to close. Then it accelerates again.

  I checked the memory usage, and my programs use not yet 2 GB of physical RAM when this slowdown happens! But even if the

  pagefile is written it there is no way that this should make Windows so brutally fails. In addition, I have too many 4 gigs of readyboost.

  Something is very wrong with that and I'm curious as to why this phenomenon occurs and how can I solve it?

  No I don't have any spyware, as I said I'm a tech person, this is the basis. I know all this,

  It's something to do with the way Windows is not able to be managed properly.

  An overview of what on Earth is happening here would be greatly appreciated.

  Thank you

  Hello

  IE uses a lot of resources, especially CPU is what you slow down as only
  have 2 GB of physical RAM. ReadyBoost can help, however, this is only disc (caching speeds
  reading on the rise) and is not a replacement for real RAM.

  ===========================

  Here are a few troubleshooting methods:

  Explorer Windows stopped working
  http://support.Microsoft.com/kb/2694911

  Windows hangs or freezes<- try="" these="" first="" and="" the="" methods="" do="" apply="" to="" your="">
  http://support.Microsoft.com/kb/2681286#method22

  Performance and Maintenance<- check="" these="" especially="" the="">
  http://Windows.Microsoft.com/en-us/Windows/performance-maintenance-help#performance-maintenance-help=Windows-7&V2H=win7tab1&V3H=winvistatab1

  Other methods of troubleshooting to use according to your needs:

  Use the startup clean and other methods to try to determine the cause of and/or
  eliminate problems.

  ---------------------------------------------------------------

  References to Vista also apply to Windows 7.

  What antivirus/antispyware/security products do you have on the machine? Include
  everything you've ALWAYS had on this machine, including those you have uninstalled (they
  remains of leave behind which can cause strange problems).

  ----------------------------------------------------

  Follow these steps:

  Try these to erase corruption and missing/damaged file system repair or replacement.

  Start - type this in the search box-> find COMMAND at the top and RIGHT CLICK – RUN AS ADMIN

  Enter this at the command prompt - sfc/scannow

  How to fix the system files of Windows 7 with the System File Checker
  http://www.SevenForums.com/tutorials/1538-SFC-SCANNOW-Command-System-File-Checker.html

  How to analyze the log file entries that the Microsoft Windows Resource Checker
  (SFC.exe) program generates in Windows Vista cbs.log
  http://support.Microsoft.com/kb/928228

  Also run CheckDisk, so we cannot exclude as much as possible of the corruption.

  How to run check disk in Windows 7
  http://www.SevenForums.com/tutorials/433-disk-check.html

  ==========================================

  After the foregoing:

  How to troubleshoot a problem by performing a clean boot in Windows
  Vista or Windows 7
  http://support.Microsoft.com/kb/929135

  Use advanced tools to solve performance problems in Windows 7
  http://www.howtogeek.com/HOWTO/6152/use-advanced-tools-to-troubleshoot-performance-problems-in-Windows-7/

  Problems with the overall speed of the system and performance
  http://support.Microsoft.com/default.aspx/GP/slow_windows_performance?p=1

  Optimize Windows 7 for better performance
  http://Windows.Microsoft.com/en-us/Windows7/optimize-Windows-7-for-better-performance

  Open the troubleshooter of Performance
  http://Windows.Microsoft.com/en-us/Windows7/open-the-performance-Troubleshooter

  To see everything that is in charge of startup - wait a few minutes without doing anything-
  then right click on taskbar - task manager - take a look at Applications.
  Process - Services - this is a quick reference (if you have a little box on)
  Lower left - show for all users, then check that).

  How to change, add or remove startup programs in Windows 7
  http://www.SevenForums.com/tutorials/1401-startup-programs-change.html

  Is a quick check to see who are loading method 2 - using MSCONFIG
  then after a list of these here.
  --------------------------------------------------------------------

  Tools that should help you:

  Process Explorer - free - find out what files, registry keys, and other objects
  processes have open, which DLLs they have loaded and more. This unique
  powerful utility will show you even owned by each process.
  http://TechNet.Microsoft.com/en-us/Sysinternals/bb896653.aspx

  Autoruns - free - see what programs are configured to start automatically
  When your system boots and you connect. Autoruns also shows you the complete list
  locations of registry and files where applications can configure start automatic settings.
  http://TechNet.Microsoft.com/en-us/sysinternals/bb963902.aspx
  Process Monitor - Free - monitor file system, registry, process, thread and DLL
  activity in real time.
  http://TechNet.Microsoft.com/en-us/Sysinternals/bb896645.aspx

  There are many excellent free tools from Sysinternals
  http://TechNet.Microsoft.com/en-us/Sysinternals/default.aspx

  WhatsInStartUP - free - this utility displays the list of all applications that are
  loaded automatically when Windows starts. For each application, what follows
  the information is displayed: Type of startup (registry/Startup folder), Command - Line
  Channel file, the product name, Version, company name, location in the registry or
  file system and more. It allows you to easily disable or remove unwanted programs
  that runs in your Windows startup.
  http://www.NirSoft.NET/utils/what_run_in_startup.html

  There are many excellent free tools to NirSoft
  http://www.NirSoft.NET/utils/index.html

  Window Watcher - free - do you know what is running on your computer? Maybe
  not. The window Watcher says it all, every window created by each execution of the statement
  program, if the window is visible or not.
  http://www.KarenWare.com/PowerTools/ptwinwatch.asp
  Many excellent free tools and an excellent newsletter at Karenware
  http://www.KarenWare.com/

  ===========================================

  Think about it an absolute must - manually update your drivers.

  Vista and Windows 7 updated drivers love then here's how update the most important.

  This is my generic how updates of appropriate driver:

  This utility, it is easy see which versions are loaded: run DriverView - set
  SEE drivers to hide Microsoft - update those without drain in their names. (Also
  updated the BIOS and drivers from the chipset on the site of the constructor/the system motherboard).

  -Free - DriverView utility displays the list of all device drivers currently loaded
  on your system. For each driver in the list, additional useful information is
  Poster: load address of the driver, description, version, product name,.
  company that created the driver and more.
  http://www.NirSoft.NET/utils/DriverView.html

  For drivers, visit Maker as replacements and system manufacturer of device which are
  the most recent. Control Panel - write - graphics card - device manager
  the brand and complete model of your video card - double click - tab of the driver-
  Note the version information. Now click on UPdate Driver (this can do nothing
  MS is far behind the certification of drivers) - then do a right click - Uninstall - REBOOT
  This will refresh the driver stack.

  Repeat this for network - card (NIC), Wifi network, sound, mouse, and keyboard
  If there are 3rd party with their own software and drivers and the other main device drivers
  you have.

  Now, go to the site of the manufacturer of system (Dell, HP, Toshiba as examples) (restore)
  and site (Realtek, Intel, Nvidia, ATI, for example) and get the manufacturer and device
  their latest versions. (Look for the system to update the BIOS, Chipset and software updates
  Site of the manufacturer here.)

  Download - SAVE - go to where you put them - right click - RUN AD ADMIN -.
  REBOOT after each installation.

  Always check in the Device Manager - drivers tab to be sure the version you are
  installation actually appears. This is because that some rollback of drivers before the
  later is installed (particularly that audio drivers) so install a driver - reboot.
  Make sure that it is installed and repeat if necessary.

  Repeat to the manufacturers - BTW to the device makers DO NOT RUN THEIR
  SCANNER - check manually by model.

  Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
  http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

  Installation and update of drivers under Windows 7 (updated drivers manually using
  the above methods is preferable to ensure the latest drivers from the manufacturer of system
  and device manufacturers are located)
  http://www.SevenForums.com/tutorials/43216-installing-updating-drivers-7-a.html

  If you update the drivers manually, then it's a good idea to disable driver facilities
  in the updates of Windows, which leaves on Windows updates, but it will not be installed
  pilots who are generally older and cause problems. If updates provides a new
  driver then hide it (right click on it) and then go get new ones manually if
  you want.

  How to stop Windows 7 automatically install drivers
  http://support.Microsoft.com/kb/2500967

  ===========================================

  Refer to these discussions because many more excellent advice however remember to check
  your antivirus, the main drivers and BIOS update programs and also to solve problems
  with the first method cleanboot.

  Problems with the overall speed of the system and performance
  http://support.Microsoft.com/GP/slow_windows_performance/en-us

  Performance and Maintenance Tips
  http://social.answers.Microsoft.com/forums/en-us/w7performance/thread/19e5d6c3-BF07-49ac-a2fa-6718c988f125

  Explorer Windows stopped working
  http://social.answers.Microsoft.com/forums/en-us/w7performance/thread/6ab02526-5071-4DCC-895F-d90202bad8b3

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

• Why is my pc slow when windows permitant

  I would like to know why my pc. slow, this is a windows 7 edition starter from asus inc.

  Hello

  1. is the slow computer when you work with a particular application, such as Internet Explorer, Microsoft Office, or games?

  2 have you installed new hardware or software before the show?

  3. who is the antivirus installed on the computer program?

  Whatever the cause, there are lots of ways to help speed up Windows and make your PC work even without upgrading your hardware.

  You can consult this article to improve the performance of the computer.

  Reference:

  Optimize Windows 7 for better performance

  http://Windows.Microsoft.com/en-in/Windows7/optimize-Windows-7-for-better-performance

  Note: If infections are detected during the scan, there is a risk of data loss because infected files will be deleted.

  Hope this information helps.

• Why Mac Pro is slow at the opening of the apps?

  Compare to the other mac, my mac pro is so slow at the opening of the apps and any other use. Memory is 4 GB and still half store is available. This place since the case open. But other Mac that we have in the House so different from mine. Should I call it Karma? Next to no where my CD player does not read any CD more. If original or a cheap it is not serious. Additionally CDs can only release by restarting my mac.

  Mac Pro 13 inch Mid 2012

  I5 2.5 GHz

  4G

  Macintosh HD

  CPWMJ7Y5DTY3

  500 G (280 G available storage) storage

  Should I upgrade my ram from 8 G to get faster in opening applications, using Microsoft Office, gaming, etc.?

  Should I change my CD player? (If I have it is so so so expensive being honest).

  Tin

  Run and view the results here so that we know more about your configuration.

  http://etrecheck.com/

  EtreCheck

  https://discussions.Apple.com/docs/doc-6172

  This is the Office Mac Pro forum. You have a MacBook Pro

• In Mac Os Sierra why is he suddenly slow opening of folders of bookmarks in the sidebar of Safari?

  Since the installation of Mac Os Sierra I'm suddenly affected by a very slow opening and closing bookmark next to Safari bar files when I click on them.  Regularly, it takes 3 seconds for a file to open or close to display the list of bookmarks in a file.  Does anyone else know this?  Trying to solve the problem, I have repaired the Mac HD, emptied all my caches in the library in the Finder, reset the PRAM and am now ideas.

  Make a backup using Time Machine or a cloning program, to ensure that data files can be recovered. Two backups are better than one.

  Try to set up another admin user account to see if the same problem persists. If back to my Mac is enabled in the Preferenes system, the guest account will not work. The intention is to see if it is specific to an account or a system wide problem. This account can be deleted later.

  Isolate a problem by using a different user account

  If the problem is still there, try to start safe mode using your usual account.  Disconnect all devices except those necessary for the test. Shut down the computer and then put it up after a 10 second wait. Immediately after hearing the startup chime, hold down the SHIFT key and continue to hold it until the gray Apple icon and a progress bar appear. Startup is considerably slower than normal. This will reset some caches, forces a check for directory and disables all start-up and connection, among other things. When you restart normally, the initial restart may be slower than normal. If the system is operating normally, there may be 3rd party applications that pose a problem. Try to delete/disable the third-party applications after a reboot using the UN-Installer. For each disable/remove, you need to restart if you do them all at once.

  Safe mode - on El Capitan

  Start Mode without failure-El Capitan.

  If it works in safe mode, try to run this program when it is started normally, copy and paste the result in a response. The program was created by Etresoft, a regular contributor.  Use please copy and paste the screenshots can be difficult to read. On the screen with the Options, please open Options and tick the boxes in the bottom 2 before the race. Click on the button "Report share" in the toolbar, select "Copy to Clipboard" and then paste into a response. This will show what is running on your computer. No personal information is shown.

  Etrecheck - Information System