XE-ORA-27102: out of memory

Hi Experts,

I installed 11g on Linux virtual machine XE. XE starts well at first, but after using it for awhile, it is broken and gives error when the re-booting of it:

SQL > startup;

ORA-27102: out of memory

Linux-x86_64 error: 12: cannot allocate memory

Additional information: 1

Additional information: 1835040

Additional information: 8

What could I do to keep the XE not down? I reduced the memory_target 900 m (used in 1 G), but it did not help.

Very much appreciate your comments.

-/ + buffers/cache: 1724128 198392

You have less than 200 MB of RAM available... have you tried assigning a little more memory you virtual machine?

Tags: Database

Similar Questions

ORA-27102: out of memory

Hi all
11 GR 2
RHEL6.5
I'm from our TEST database, but I got error
$ sqlplus / as sysdba
SQL * more: Production of the 11.2.0.4.0 version on MON Feb 1 09:21:46 2016
Copyright (c) 1982, 2013, Oracle. All rights reserved.
Connect to an instance is idle.
SQL > startup
ORA-27102: out of memory
Linux-x86_64 error: 28: no space is available on the device
Additional information:-33554432
Additional information: 1
What is the memory below that I can attribute to my LMS avoid this error?
# free-m
total used free shared buffers cached
MEM: 14882 9679 5202 1012 29 1759
-/ + buffers/cache: 7890 6991
Swap: 20488 8881 11607
I also Thomas set shmall in /etc/sysctl.conf
# Control the maximum number of shared memory pages segments
kernel.shmall = 4294967296
Thank you very much
JC

shmall is the total amount of shared memory, in the pages, that the system can use simultaneously.

Define shmall equal to the sum of all Sams in the system, divided by the size of the page.

The page size can be determined by using the following command:

$ getconf PAGE_SIZE

4096

For example, if the sum of all Sams in the system is 16 GB and the result of

"$ getconf PAGE_SIZE" is 4096 (4 KB) then set shmall 4194304 pages

As the root user affect the 4194304 shmall in /etc/sysctl.conf file:

kernel.shmall = 4194304

then run the following command:

$ sysctl Pei

$ cat/proc/sys/kernel/shmall

4194304

The above command loads the new value and an restart is not required.

Return to the oracle user and try again the start command.

ORA-27102: out of memory, when I try to increase the SGA in gr 10, 2 linux 64
Hi, I m trying to increase the sga_max_size parameter, but when I start the DB is the following error message:

ORA-27102: out of memory... The maximum value is about 3.6 GB, if I increase this value, the DB does not start and displays this error.

My version of DB is 10.2.0.4.0
My OS: Enterprise Linux Enterprise Linux AS 4 release (October 6 update)
The linux Kernel: 2.6.9 - 67.0.0.0.1.ELsmp x86_64 GNU/Linux
Physical memory: 14 GB

My init.ora:

orcl10.__db_cache_size = 2113929216
orcl10.__java_pool_size = 33554432
orcl10.__large_pool_size = 16777216
orcl10.__shared_pool_size = 301989888
orcl10.__streams_pool_size = 16777216
*.audit_file_dest='/home/Oracle/product/BBDd/Admin/orcl10/adump '
*.background_dump_dest='/home/Oracle/product/BBDd/Admin/orcl10/bdump '
* full = '10.2.0.1.0'
*.control_files='/home/Oracle/product/oradata/orcl10/control01.ctl','/home/Oracle/product/oradata/orcl10/control02.ctl','/home/Oracle/product/oradata/orcl10/
control03. CTL'
*.core_dump_dest='/home/Oracle/product/BBDd/Admin/orcl10/cdump '
* .db_block_size = 8192
* .db_domain = "
* .db_file_multiblock_read_count = 16
* .db_name = "orcl10".
*.db_recovery_file_dest='/home/Oracle/product/BBDd/flash_recovery_area '
* .db_recovery_file_dest_size = 96636764160
*. Dispatchers ='(Protocol=TCP) (SERVICE = orcl10XDB)"
* .job_queue_processes = 10
* .open_cursors = 300
* .pga_aggregate_target = 830472192
* runoff = 150
* .remote_login_passwordfile = "EXCLUSIVE."
* .session_cached_cursors = 50
* .sga_max_size = 3670016000
* .sga_target = 3670016000
* .shared_pool_size = 267386880
* .undo_management = "AUTO".
* .undo_tablespace = "UNDOTBS1.
*.user_dump_dest='/home/Oracle/product/BBDd/Admin/orcl10/udump '

My sysctl.conf

# Sysctl for Enterprise Linux kernel configuration file
#
# For the binary values, 0 is off, 1 is enabled. See sysctl (8) and
# sysctl.conf (5) for more details.

# IP packets transfer controls
NET. IPv4.ip_forward = 0

# Control source route verification
NET. IPv4.conf.default.rp_filter = 1

# Do not accept source routing
NET. IPv4.conf.default.accept_source_route = 0

# The request feature of the kernel debugging system control
kernel. SysRq = 0

# Check if core dumps will add the PID for the base file name.
# Useful to debug multithreaded applications.
kernel.core_uses_pid = 1

#Parametros del kernel para oracle rac

kernel.shmall = 2097152
kernel.shmmax = 10737418240
kernel.shmmni = 4096
# semaforos: senmsl semmns, semopm semmni
kernel.SEM = 256 32000 100 128
#kernel.msgmnb = 65535
#kernel.msgmni = 2878
#kernel.msgmax = 8192
FS.file - max = 65536
NET. IPv4.ip_local_port_range = 1024 65000
NET. Core.rmem_default = 262144
NET. Core.rmem_max = 262144
NET. Core.wmem_default = 262144
NET. Core.wmem_max = 262144

I need an idea for how to resolve this problem, thank you

Published by: cehache on 10-mar-2011 11:50
May sound like a stupid question, but are you sure that you are using Oracle 64-bit? The OS is 64-bit and SHM kernel parameters appear to be configured correctly, but there is this 3.6 GB limit is for 32-bit applications, which makes me wonder...

create the database fails with ORA-27102 - not enough memory
Hello

I have server Solaris 10 with 16 GB of ram. On that, there are 10 databases (8 of them 9.2.0.7 and 2 of them 10.2.0.4) running - but they have a small LVO-300 mb each (about even smaller 200 MB or more). Now, I have to create two more data on this database. When I try to create the db, it fails with the error:

Connect to an instance is idle.
ORA-27102: out of memory
SVR4 error: 22: invalid argument

And the journal of alerts meesages as below:
Starting ORACLE instance (normal)
Tue May 26 07:37:39 2009
WARNING: EINVAL creation of segment size 0 x 0000000029002000
Difficulty shm parameters in/etc/System or equivalent

See also the output of this command:

prctl - n Project.Max - shm-memory - i user.root of the project
project: 1: user.root
NAME PRIVILEGE VALUE FLAG ACTION BENEFICIARY
Project.Max - shm-memory
3.92 GB privilege - deny-
system 16.0EB max deny-

Now, I tried to change that with this command (as suggested in the installation guide):
prctl - n v Project.Max - shm-memory - 8 GB - r-i user.root of the project

but I still don't have the same error. So I refer to Metalink document 399895.1. It is said that manually change the settings in/etc/System. This requires a reboot and I had prior to do this restart tomorrow. But my question is: what are the values that I should put in this file? + as suggested in the note, if I put the values below? -

For example, a value of the sample (mentioned in the note) are: for entry system/etc/setting SHMMAX = 6 GB.

Set shmsys:shminfo_shmmax = 6442450944
Set semsys:seminfo_semmni = 1024
Set semsys:seminfo_semmsl = 1024
Set shmsys:shminfo_shmmni = 100

or should I put some other values (for all parameters as semmni, semmsl etc.)? I missed that I should be by specifying values.

Thank you

Published by: orausern on May 26, 2009 07:24

Published by: orausern on May 26, 2009 07:27
I'm not a Unix system administrator, but I think that your steps are correct - pl check with your Unix system administrator

Srini

Oracle RAC 12.1.0.2 (GI battery) deployment on OEL 7 (3.8.13 - 35.3.4.el7uek) fails with ORA-27102

Hi guys,.
I am currently trying to deploy a complete installation (GI battery) of Oracle RAC 12.1.0.2 cool on OEL 7 (3.8.13 - 35.3.4.el7uek) with 2 nodes for validation purposes. However the installation itself went well, but 'Creation repository for Oracle Grid Infrastructure Management container' step fails with "ORA-01034: ORACLE not available / ORA-27102: out of memory / Linux-x86_64 error: 12: cannot allocate memory". The steps of runInstaller validation completed successfully, but I never take this step of configuration without jumping.
Here is my configuration which should normally avoid such errors ORA.
Host
-bash - $4.2 uname - a
Linux OELRAC1 3.8.13 - 35.3.4.el7uek.x86_64 #2 SMP Tue Jul 29 23:24:14 CDT 2014 x86_64 x86_64 x86_64 GNU/Linux
"Creation of repository database for Oracle Grid Infrastructure Management container" error in /oracle/base/cfgtoollogs/dbca/_mgmtdb/trace.log
From restoration to August 9, 14
allocated channel: ORA_DISK_1
channel ORA_DISK_1: SID = 12 type of device = DISK
channel ORA_DISK_1: from the restore backup set data file
channel ORA_DISK_1: specifying datafile (s) to restore from backup set
channel ORA_DISK_1: restore datafile 00003 to + GRID
channel ORA_DISK_1: backup /oracle/grid/12102/assistants/dbca/templates/MGMTSeed_Database.dfb piece reading
channel ORA_DISK_1: ORA-19870: error when restoring the backup /oracle/grid/12102/assistants/dbca/templates/MGMTSeed_Database.dfb piece
ORA-19504: could not create the file "+ GRID.
ORA-17502: ksfdcre:4 cannot create the file + GRID
ORA-15001: diskgroup 'GRID' does not exist or is not mounted
ORA-01034: ORACLE not available
ORA-27102: out of memory
Linux-x86_64 error: 12: cannot allocate memory
Additional information: 2663
Additional information: 1565392897
Additional information: 161480704
switch to the previous backup
Number of folder of the data file = 3 name = + GRID
RMAN-00571: ===========================================================
RMAN-00569: = ERROR MESSAGE STACK FOLLOWS =.
RMAN-00571: ===========================================================
RMAN-03002: failure of the restore command at 09/08/2014 19:41:47
ORA-01119: error in creating file of database "+ GRID.
ORA-17502: ksfdcre:4 cannot create the file + GRID
ORA-15001: diskgroup 'GRID' does not exist or is not mounted
ORA-01034: ORACLE not available
ORA-27102: out of memory
Linux-x86_64 error: 12: cannot allocate memory
Additional information: 2663
Additional information: 1565392897
Additional information: 1614807040
RMAN-06956: create the data file failed; try again after removing + OS GRID
SHM / CPI (check the id of shm with previous information)
-bash - $4.2 ipcs - a
-Shared memory segments-
key shmid owner perms bytes nattch status
1565360128 0 x 00000000 grid 640 4096 0
1565392897 0 x 00000000 grid 640 4096 0
0xfba47600 1565425666 640 24576 29 grid
Memory of the ASM instance setting
SQL > see the memory settings
VALUE OF TYPE NAME
------------------------------------ ----------- ------------------------------
whole big memory_max_target 1076M
whole large memory_target 1076M
ASM disk groups
SQL > select NAME, STATE, TOTAL_MB, USABLE_FILE_MB from v$ asm_diskgroup;
NAME STATE TOTAL_MB USABLE_FILE_MB
------------------------------ ----------- ---------- --------------
RACK MOUNTED 6144 4868
/ dev/shm to memory_target (more than enough free space)
-bash - $4.2 df-h
Size of filesystem used Avail use % mounted on
tmpfs, 630M 2.4 G 3.0 G 21% / dev/shm
Kernel for SHM limits set to unlimited parameter
-bash - $4.2 sysctl - a | grep shm
kernel.shmall = 1152921504606846720
kernel.shmmax = 922337203685477580
User limits on unlimited for memory
-bash-4, $ 2 cat /etc/security/limits.conf
# Oracle settings
grid soft nproc 2047
grid hard nproc 16384
grid soft nofile 1024
grid hard nofile 65536
Oracle nproc 2047 soft
Oracle nproc 16384 hard
Oracle soft nofile 1024
Oracle hard nofile 65536
* hard memlock unlimited
* soft memlock unlimited
-bash - 4, $ 2 known - grid
-bash - $4.2 ulimit - a
the file size (blocks, - c) of base 0
(kbytes, - d) data seg size unlimited
scheduling priority (-e) 0
size of the file (blocks, f) - unlimited
pending signals (-i) 23953
Max locked memory (kbytes, - l) unlimited
size of the memory (k, m) max - unlimited
open files (-n) 1024
a size (512 bytes, - p) 8 hose
(Bytes, - q) POSIX message queues 819200
real-time priority (-r) 0
size (Ko, - s) 8192 battery
time processor (seconds,-t) unlimited
Max user process (-u) 2047
virtual memory (KB), - v) unlimited
the locks on files (-x) unlimited
So what the hell is wrong here? Why the instance ASM (+ ASM1) returns the error below, even if there is no memory limit / problem. The error with the disk group is also absolutely no sense.
------------------------------------------------------------------------------------------------------------------------
ORA-01119: error in creating file of database "+ GRID.
ORA-17502: ksfdcre:4 cannot create the file + GRID
ORA-15001: diskgroup 'GRID' does not exist or is not mounted
ORA-01034: ORACLE not available
ORA-27102: out of memory
Linux-x86_64 error: 12: cannot allocate memory
Additional information: 2663
Additional information: 1565392897
Additional information: 1614807040
------------------------------------------------------------------------------------------------------------------------
Someone at - he encounter the same problem with 12.1.0.2 by deploying the CDB for Grid Infrastructure Management repository? Is there something special with UEK3 (3.8.13 - 35.3.4.el7uek) on 7 OEL? Any necessary special kernel parameter (although the runInstaller controls do not mention)? I'm totally tapped by GI 12.1.0.2.
Thank you.
Best regards
Stefan

Hi guys,.

I was finally able to solve this problem.

She was related to a memory on the provisioning of problem in the virtual environment as both nodes are VMs. Unfortunately none of these errors of memory were populated / pushed somehow in the virtual machine.

Best regards

Stefan

out of memory (again!)
Oracle 10.2.0.4
Windows 2003

Hi experts.

The following issues reported in the trace and alert logs means that our system is unable to operate yesterday:
Boot process failed, error of the battery:
ORA-27300: OS dependent operating system: CreateThread failed with status: 8
ORA-27301: OS Error Message: not enough memory is available to process this command.
ORA-27302: an error occurred at: ssthrddcr

The foregoing is well documented and the trail leads to the conclusion that we are out of memory - or rather, we need to reconfigure our memory.

I've seen Note 466370.1 ORA-7445 [ACCESS_VIOLATION] [unable_to_trans_pc] [UNABLE_TO_WRITE] failure ORA-27301 do message operating system not enough storage ORA-27300 ORA-27302 > / >

For Windows, see Note 225349.1 Application Address Windowing Extensions (AWE) or VLM on Windows platforms

The server could be hitting the memory maximum upper limit per process, which is of 2 GB:

SGA and PGA targets are set in our instance of 1 GB each

I saw the possible remedies include:

The switch '3G' (which I am reluctant to do since I understand that would sacrifice the dynamic memory management).

"buying" more memory (not a chance!)

Note 466370.1 suggests that another option is to decrease the size of the SGA (and increase the PGA).

This last suggestion might be the way to go.

My real question, I guess, it is how to reduce LMS would help the case? Reducing the SGA (and maybe even the PGA) will solve this problem?

Thank you.
user11981168 wrote:
My real question, I guess, it is how to reduce LMS would help the case? Reducing the SGA (and maybe even the PGA) will solve this problem?

Reducing the SGA would make more memory available for your operating system for user processes to use.

Out of memory in the process...
Hi all

Our database is Oracle 9.0.1 in Windows 2003. Our total session is about 200. Our server is a dedicated server.
RAM - 6 GB. Oracle can use up to 2 GB in 32-bit Windows. The memory configuration is like this:
The sharing pool size = 728MB
Buffer cache = 592MB
Java pool = 104MB
Large pool = 60 MB

There is no pga_aggregate_target in our database. Our Setup works for more than 200 users?

Our database server is running in the replicated environment. Most of the time we get 'process' out of memory ' error. This error is in the replicate site. Error is like this:

ORA-12012: error on auto work 1
ORA-12008: error path refresh materialized view
ORA-04030: memory of process when trying to allocate 1044 bytes (pmt, col pref alloc Alloc)
ORA-06512: at "SYS." DBMS_SNAPSHOT", line 814
ORA-06512: at "SYS." DBMS_SNAPSHOT", line 872
ORA-06512: at "SYS." DBMS_IREFRESH', line 577
ORA-06512: at "SYS." DBMS_REFRESH", line 195

And in the site main error is like this:

[ORA-00600: internal error code, arguments: [qerrmOFBu1], [3113] [] [] [], [], []]

What is the replication problem? How we solve it? Need all of your help. Please suggest.

Martiny.
Hello

It is not easy, there are several ways.

If I were you, I'll check the alert "log" maybe you have other interesting error and Trace.

Otherwise, some article about these error ORA-12008 and ORA-04030 referred to a lack of PGA, which
may be your case because you have 200 users.

Here you will find an interesting link on this topic and look for Materialized View - Fast Refresh - ORA-04030 :

http://asktom.Oracle.com/pls/asktom/f?p=100:11:0:P11_QUESTION_ID:4541191739042

So I'll advise you to check your PGA when the error occurs (select * from v$ pgastat;).

If you need more PGA Tour then, you can lower the SGA (e.g. buffer cache) but it will affect performance.

The * / 3 GB * parameter can help, but the best is to go to a * 64-bit server * (and if possible to support
release of Oracle). So that you can overcome the limit of 2 GB (or 3 GB) process.

Hope this helps.
Best regards
Jean Valentine

iMac to run out of memory system [Etrecheck report]

I have an iMac 2013 end (27-inch, 3.2 GHz i5) with 24 GB RAM installed running OS X El Capitan 10.11.5). Whenever Safari is open, it slows down gradually until I get a message "your system is out of memory the application" and several applications have been suspended. I tried to reinstall the OS X without result.

Once a report of Etrecheck indicates failure Drive with 19 errors, I contacted the Apple Support. The tech support guy was not familiar with Etrecheck, but don't think it was a defective drive. He had me DOWNLOAD & running Malwarebytes (did not find anything), create a Test user (which looked OK) and accompanied me through the removal of the caches in the library in my own user (which seemed to work for a while). He seemed anxious to finish my problem, so I let it go. Then he started to slow again. Subsequent reports of Etrecheck showed still drive failure but with only 2 to 5 errors. Now the drive seems fine.

Safari seems to be the cause. I deleted several tabs and off most of the extensions, but it did not help.

Here is the current Etrecheck report:

EtreCheck version: 2.9.13 (267)

Report generated 2016-07-21 13:51:27

Download EtreCheck from https://etrecheck.com

Time 03:28

Performance: good

Click the [Support] links to help with non-Apple products.

Click [details] for more information on this line.

Problem: Another problem

Description:

Short memory of the application system

Hardware Information: ⓘ

iMac (27 inch, at the end of 2013)

[Data sheet] - [User Guide] - [warranty & Service]

iMac - model: iMac14, 2

1 3.2 GHz Intel Core i5 CPU: 4 strands

24 GB expandable RAM - [Instructions]

BANK 0/DIMM0

OK 8 GB DDR3 1600 MHz

BANK 1/DIMM0

OK 4 GB DDR3 1600 MHz

0/DIMM1 BANK

OK 8 GB DDR3 1600 MHz

BANK 1/DIMM1

OK 4 GB DDR3 1600 MHz

Bluetooth: Good - transfer/Airdrop2 taken in charge

Wireless: en1: 802.11 a/b/g/n/ac

Video information: ⓘ

NVIDIA GeForce GT M 755 - VRAM: 1024 MB

iMac 2560 x 1440

Software: ⓘ

OS X El Capitan 10.11.5 (15F34) - since startup time: less than an hour

Disc information: ⓘ

ST1000DM003 disk HARD APPLE disk0: (1 TB) (rotation)

EFI (disk0s1) < not mounted >: 210 MB

Macintosh HD (disk0s2) /: 999,35 (Go 194,50 free)

Recovery HD (disk0s3) < not mounted > [recovery]: 650 MB

USB information: ⓘ

VIA Labs, Inc..          USB3.0 hub

VIA Labs, Inc..          USB3.0 hub

Apple Inc. BRCM20702 hub.

Apple Inc. Bluetooth USB host controller.

Apple Inc. FaceTime HD camera (built-in)

VIA Labs, Inc..          USB 2.0 hub

VIA Labs, Inc..          USB 2.0 hub

SanDisk ImageMate 8 in 1

Lightning information: ⓘ

Apple Inc. Thunderbolt_bus.

Guardian: ⓘ

Mac App Store and identified developers

Kernel extensions: ⓘ

/ Applications/Easy VHS to DVD/Easy VHS to DVD Capture.app

com.elgato.driver.Pluto2 [no charge] (1.1 - 2012-01-19) [Support]

/ Applications/Easy VHS to DVD/Toast 9 Basic.app

com.roxio.BluRaySupport [no charge] (1.1.6 - 2012-01-19) [Support]

com.roxio.TDIXController [no charge] (2.0 - 2012-01-19) [Support]

/ Applications/Parallels Desktop.app

com.parallels.kext.hidhook [no charge] (9.0 24251.1052177 - 2016-03-26) [Support]

com.parallels.kext.hypervisor [no charge] (9.0 24251.1052177 - 2016-03-26) [Support]

com.parallels.kext.NetBridge [no charge] (9.0 24251.1052177 - 2016-03-26) [Support]

com.parallels.kext.usbconnect [no charge] (9.0 24251.1052177 - 2016-03-26) [Support]

com.parallels.kext.vnic [no charge] (9.0 24251.1052177 - 2016-03-26) [Support]

/ Applications/Toast Titanium/Spin Doctor.app 11

com.hzsystems.terminus.driver [no charge] (4-19 - 01 - 2012) [Support]

Launch system officers: ⓘ

[loaded] 7 tasks Apple

[loading] 153 tasks Apple

[operation] 78 tasks Apple

Launch system demons: ⓘ

[loaded] 47 tasks Apple

[loading] 154 tasks Apple

[operation] 90 tasks Apple

Launch officers: ⓘ

[no charge] com.adobe.AAM.Updater - 1.0.plist (2016-03-08) [Support]

[operation] com.amazon.sendtokindle.launcher.plist (2015-11-13) [Support]

[operation] com.epson.ecrp.launcher.plist (2015-06-28) [Support]

[loading] com.epson.esua.launcher.plist (2016-03-28) [Support]

[operation] com.epson.eventmanager.agent.plist (2012-05-08) [Support]

[loading] com.google.keystone.agent.plist (2016-07-11) [Support]

Launch demons: ⓘ

[loading] com.adobe.fpsaud.plist (2016-06-28) [Support]

[loading] com.google.keystone.daemon.plist (2016-07-11) [Support]

[loading] com.malwarebytes.HelperTool.plist (2016-07-16) [Support]

User launch officers: ⓘ

[loading] com.adobe.AAM.Updater - 1.0.plist (2016-01-07) [Support]

[failure] com.lastpass.LastPassHelper.plist (2016-07-21) [Support]

Items in user login: ⓘ

iTunesHelper Application (/ Applications/iTunes.app/Contents/MacOS/iTunesHelper.app)

Application own memory (memory Clean.app/Applications /)

Other applications: ⓘ

com [running]. GoPro.GoPro - importing

[performance] com.bloombuilt.dayone - mac-agent

[ongoing] com.etresoft.EtreCheck.1096352

com.fiplab.MemoryCleanHelper [loading]

[ongoing] com.fiplab.memoryclean.1095392

[loading] 390 tasks Apple

[operation] 200 tasks Apple

Plug-ins Internet: ⓘ

JavaAppletPlugin: 15.0.1 - 10.11 (2016-02-15) check the version of the SDK

FlashPlayer - 10.6: 22.0.0.209 - SDK 10.9 (2016-07-15) [Support]

QuickTime Plugin: 7.7.3 (2016-05-05)

Flash Player: 22.0.0.209 - SDK 10.9 (2016-07-15) [Support]

Default browser: 601 - SDK 10.11 (2016-05-05)

nplastpass: 4.1.2 - SDK 10.11 (2016-07-21) [Support]

GarminGpsControl: 4.2.0.0 - SDK 10.8 (2014-03-31) [Support]

Silverlight: 5.1.41212.0 - SDK 10.6 (2016-03-26) [Support]

iPhotoPhotocast: 7.0 - 10.7 SDK (2012-04-07)

User Plug-ins internet: ⓘ

Web of Google Earth plugin: 7.1 (2013-10-07) [Support]

Safari extensions: ⓘ

AdBlock - BetaFish, Inc. - https://getadblock.com (2016-05-21)

DuckDuckGo - DuckDuckGo - http://duckduckgo.com (2015-07-11)

Open in Internet Explorer - Parallels - http://www.Parallels.com/fr/ (2016-01-24)

PIN button - Pinterest, Inc. - http://www.pinterest.com/ (2016-01-21)

LastPass - LastPass - https://lastpass.com (2016-07-21)

1 - ClickWeather - TWCi - http://www.weather.com/ (2014-09-26)

3rd party preference panes: ⓘ

Flash Player (2016-06-28) [Support]

GoPro (2014-12-25) [Support]

Paragon NTFS for Mac® OS X (2016-06-24) [Support]

Time Machine: ⓘ

Skip system files: No.

Mobile backups: OFF

Automatic backup: NON - automatic backup disabled

Volumes to back up:

Macintosh HD: Disc size: 999,35 GB disc used: 804,84 GB

Destinations:

Seagate fake TC [network]

Total size: 5,00 TB

Total number of backups: 47

An older backup: 25/06/16, 22:10

Last backup: 21/07/16, 11:41

Size of backup drive: Excellent

Size of backup 5,00 TB > (disk size 999,35 GB X 3)

Top of page process CPU: ⓘ

100% safari

2% WindowServer

1% kernel_task

1% fontd

0% aslmanager

Top of page process of memory: ⓘ

17.14 Go Safari

1.08 GB kernel_task

Com.apple.WebKit.WebContent (4) 492 MB

Mdworker (17) 369 MB

98 MB com.bloombuilt.dayone - mac-agent

Virtual memory information: ⓘ

100 MB of free RAM

used GB RAM 24.00 (1.18 GB being cached)

18 MB used Swap

Diagnostic information: ⓘ

July 21, 2016, 13:34:20 /Library/Logs/DiagnosticReports/Safari_2016-07-21-133420_[redacted].cpu_resourc e.diag [details]

/Applications/Safari.app/Contents/MacOS/Safari

21 July 2016, 13:21:33 self-test - spent

July 21, 2016, 13:13:28 /Library/Logs/DiagnosticReports/Safari_2016-07-21-131328_[redacted].cpu_resourc e.diag [details]

July 21, 2016, 13:04:50 /Library/Logs/DiagnosticReports/Safari_2016-07-21-130450_[redacted].hang

July 21, 2016, 12:49:58 /Library/Logs/DiagnosticReports/Safari_2016-07-21-124958_[redacted].cpu_resourc e.diag [details]

July 21, 2016, 11:37:51 /Library/Logs/DiagnosticReports/Safari_2016-07-21-113751_[redacted].cpu_resourc e.diag [details]

July 21, 2016, 11:28:47 /Library/Logs/DiagnosticReports/Safari_2016-07-21-112847_[redacted].hang

July 21, 2016, 11:12:09 ~/Library/Logs/DiagnosticReports/cloudd_2016-07-21-111209_[redacted].crash

/System/Library/PrivateFrameworks/CloudKitDaemon.Framework/support/cloudd

July 21, 2016, 11:00:46 /Library/Logs/DiagnosticReports/Safari_2016-07-21-110046_[redacted].cpu_resourc e.diag [details]

July 21, 2016, 10:36:18 /Library/Logs/DiagnosticReports/Safari_2016-07-21-103618_[redacted].cpu_resourc e.diag [details]

July 21, 2016, 08:00:39 /Library/Logs/DiagnosticReports/Safari_2016-07-21-080039_[redacted].cpu_resourc e.diag [details]

July 20, 2016, 11:13:27 /Library/Logs/DiagnosticReports/Safari_2016-07-20-111327_[redacted].cpu_resourc e.diag [details]

July 20, 2016, 07:08 /Library/Logs/DiagnosticReports/Safari_2016-07-20-070800_[redacted].cpu_resourc e.diag [details]

July 19, 2016, 17:09:01 /Library/Logs/DiagnosticReports/CalNCService_2016-07-19-170901_[redacted].crash

/System/Library/PrivateFrameworks/CalendarAgent.Framework/versions/A/XPCService s/CalNCService.xpc/Contents/MacOS/CalNCService

July 19, 2016, 12:55:09 /Library/Logs/DiagnosticReports/Safari_2016-07-19-125509_[redacted].cpu_resourc e.diag [details]

July 18, 2016, 20:01:22 /Library/Logs/DiagnosticReports/Safari_2016-07-18-200122_[redacted].cpu_resourc e.diag [details]

July 18, 2016, 13:56:03 ~/Library/Logs/DiagnosticReports/suggestd_2016-07-18-135603_[redacted].crash

/System/Library/PrivateFrameworks/CoreSuggestions.Framework/versions/A/support/ suggestd

What made these disk errors go away? These are almost always bad news.

But in fact: at the moment, Safari appears the biggest problem. Try to start in Safe Mode, followed by a normal reboot.

OS X El Capitan: start in safe mode

my mac is running out of memory

my mac is running out of memory. A couple of times that my mac has said it is close to running out of memory to disk. What should I do?

OmniDiskSweeper (free download)

http://www.OmniGroup.com/more>

When you use OmniDiskSweeper, or any utility that displays all the files... See the article after if you want to run it as root

http://www.MacObserver.com/TMO/article/how_to_recover_missing_hard_drive_space>

Warnings of boiler plate:

DO NOT delete files in your folder-> library tree as it has things like backups of your iPhone, your emails, your application preferences, etc... If you think that you found something in your Home-> library folder which can be removed, you must ask first.

DO NOT remove the files outside your home folder, you can end up removing something essential to Mac OS X and transform your Mac into a costly "door Stop."

I want to say that you will find a few very large files in private-> var-> vm (these are Mac OS X virtual memory paging files (swapfiles) and where Mac OS X stores the RAM copy when your Mac is paused). The swapfiles are removed on reboot, and the sleep image will just be recreated when you put your Mac to sleep.

If you think that you found something to remove outside your home folder, it would be better to ask first before deleting. There are many examples of people deleting files outside their home folder, rename files, or change the property or file permissions and then their Mac stops running. Don't be one of those people. Ask first.

The utility file splitting, "LabVIEW out of memory" message...

I set up a quick utility that takes a .txt file and it splits into n segments. The problem I have is that when I feed a larger file in it it gives me an error "Out of Memory". What is a most effective way todo it. Attached you will find the VI. It is written to 8.6 it take part in many, lol, it works very well as long as the file is less than 35 MB.

Here's a passage from 15 minutes to rework your VI. It can solve the problem of memory off and it shows much better style of LabVIEW. You may be able to find examples of similar bolt by searching on this forum.

Out of memory when the function call (CopyTabPage)...

Hello

I get error "-12 out of memory" when using CopyTabPage (Panel, TAB, 0, Panel, TAB,-1) on my request (the first duplication tab).

There are several levels of tab panel system (like this example)
```
\tab_1 \sub_tab_1
        \sub_tab_2
        ...
        \sub_tab_16

\tab_2  \sub_tab_1
        \sub_tab_2
        ...
        \sub_tab_16

\tab_3  \sub_tab_1
        \sub_tab_2
        ...
        \sub_tab_16

\tab_4  \sub_tab_1
        \sub_tab_2
        ...
        \sub_tab_16
```
Each sub-tab panels contains appx. 16 x 60 controls (digital, ring, String) and some of them also stripchart graphics.

I have reached the limit of the CVI? Are there things to check? (I develop under CVI 2012 SP1).

May - so that someone knows how to fix this?

Thank you

George

Error 2013 CVI: the compiler has run out of memory.

Hello

I get this error in a source file, I want to debug:

  1, 1   Error: The compiler has run out of memory.
      1, 1   Note: You may be able to work around the problem:
      1, 1   A. Set the debugging level to 'no run-time checking'.
      1, 1   B. Split your source file into smaller files.
      1, 1   C. Enable the 'O' option for your source file in the project.
      1, 1   D. Move large static data structures into new files and
      1, 1   enable the 'O' option for the new files.

Options A and C turn off debugging AIDS especially, and I don't dare edit.

So no possibility to increase the memory limit?

Node inside the loop - out of memory

Hello world

I have a Mathscript node inside a Subvi is called inside a loop for. After a few iterations of the loop, I run out of memory. That's why I added another node in Mathcript with the function 'clear' outside the Subvi, hoping that after I get the variables from the node I could erase the memory of the Mathscript, but this does not work, it is always short of memory. Is anyone know how can you delete variable memory Mathscript node, once they were saved in the variables in Labview? Thanks in advance.

You don't even really any useful information to solve the problem. As I exaplained, constantly deleting data sets just to reassign them to the next iteration is generally ill advised, because it causes just more performance and same memory fragmentation issues. It is best to operate locally as much as possible.

Who wrote the code matlab? Maybe it's very inefficient? What is doing? Perhaps rewrite in LabVIEW you gain significant performance.

Out of memory exception

Out of Memory occurred several times in my application running on Windows server 2008 R2 Standard (Service Pack 1)

I found an exception in the event viewer, but it just once.

Let me know the best solution for this

Exception from the event viewer:

The failed module name: mscorwks.dll, version: 2.0.50727.5420, time stamp: 0x4ca2b820 Exception code: 0xc0000005

.NET runtime version 2.0.50727.5420 - engine error fatal execution (74A1E92A) (80131506)

Kind regards

This issue is beyond the scope of this site (for consumers) and to be sure, you get the best (and fastest) reply, we have to ask either on Technet (for IT Pro) or MSDN (for developers)

*

http://social.technet.Microsoft.com/forums/en-us/home s/fr-U.S./Accueil

http://social.msdn.Microsoft.com/Forum

ERROR: Out of MEMORY, help, please

Edition of Windows: Windows 7 Home Premium

Processor: Intel Core i7 860

RAM: 8 GB

System type: 64-bit operating system

Motherboard: Asus P7P55D motherboard

Graphics card: GeForce GTX 295

Manufacturer: myself

Error: Out of memory error when I enter on my second game in Combat Arms (fps) by Nexon. He stops the game each time around going into the second game and gives me this error.

I've had this computer for about 3 months now, and this error began to occur when Nexon has voice chat and a few new features of game which took place in a patch about 1 month ago.

How to fix this error?

I would be very grateful if you could help me.

Mr. Gill,
I would say that you uninstall\re-insatll the game but do not install the patch. Then, play the game and try for awhile and see if the error occurs. It is possible that the patch is not fully compatible with Windows 7, or a piece of your equipment. You can also check manufacturers of games forums for more information on this situation. Mike - Engineer Support Microsoft Answers
Visit our Microsoft answers feedback Forum and let us know what you think.

XE-ORA-27102: out of memory

Similar Questions

Maybe you are looking for