Xfinity triple play requires new modem?

Similar Questions

• New modem cannot connect to Time Capsule

  Xfinity gave me a new gateway wireless modem/router a few weeks ago.  I hung it just as the former with a cable to the Capsule of time (not wireless).  Since then, my MacBook Pro (OS X Yosemite 10.10.5) can not find the TC and said "backup drive is not available."  Meanwhile, the TC has a flashing orange light.  I rebooted everything more than once.  The time on my Mac says Machine I have not backed up since 15 February, but when I go into "Time Machine", it looks like there were multiple regular backups since then (I'm skeptical).  User support Comcast tinkered around for an hour and he couldn't understand.  Another suit tech support tried for another hour and could not make any progress.  How can I make it work again?

  You MUST reset the TC factory and start over... This happens whenever you make a network change and there is no change in larger network than what you were doing... to replace the router.

  Here are the instructions to get going again. It is a comprehensive so that your needs can be met with just a couple of them.

  Start from a factory reset. No files are lost on the drive hard in doing so.

  Universal factory reset

  Turning off the TC... That is, remove the power supply cord or the power at the wall outlet, wait 10 seconds... Hold the reset button... be nice... Turn on always even now in reset... and keep holding in for another 10 seconds. You may need assistance because it is difficult to hold in reset and power on. It will show the success quickly flashing led front. Release reset... and wait a few minutes for the TC to reset and return with the factory settings. If the front LED flashes quickly you missed and simply try again. The reset is quite fragile in these... Press the key while it is just click away and not more... I've seen people bend lever or even break. I use a toothpick as a tool.

  NB. None of your files on the hard drive of the TC are removed... This simply clears the settings of the router of the TC.

  The installer the TC.

  And then redo the configuration of the computer with the Mavericks - Yosemite - ElCapo. (MYELCAP)

  1. the use of very short names... NO APPLE RECOMMENDED names. Without the space and pure alphanumeric characters.

  for example TCgen5 for the base station and the name of the TCwifi wireless.

  If the problem is using wireless TC24ghz and TC5ghz with fixed channels as it also seems to help stop the nonsense. But it can be tried in the second round. IE, plan on a first and second series of changes to fix this... If all goes well... I note other steps can you tour2.

  2. use all passwords also consistent with 1. but maybe a little longer. IE 8 and 20 characters of mixed cases and numbers... no alphanumeric non-caracteres.

  3. If the TC is router, you can ignore this point. It is only a problem when the TC is bridged.

  If ensure that the TC is always the same IP address... you will need to do this on the main router using a dhcp reservation... or a bit more complex setup by using the static IP address in the TC. But it's important for deriving from intellectual property in all directions when MYELCAP do not remember his name for 5 min after a reboot done for poor network management.

  4. check that your share on the computer name does not change... Make sure that it is also in line with the above... short without space and pure alphanumeric... but this change will mess up your TM backup... so be prepared to make a new, full backup. Sorry... keep this one for the second round, if you want to avoid a new backup.

  5 attach the TC disc into the computer manually.

  In Finder, go, connect to the server in the main menu,

  Type in SMB://192.168.0.254 (or whatever ip of TC is that you made static. It's a default router 10.0.1.1 and I encourage people to stick with it unless you know what you're doing).

  You can use the name... SMB://TCgen5.local where you replace TCgen5 with your name of TC... local is the default domain of the TC and does not change.

  However the names are not so easy as... the IP address nor reliable. They are not at least not in Yosemite. The field can also be a problem if you are not clogged or wireless directly to the Treasury Board.

  6. ensure that IPv6 is set to link-local only in the computer. For example wireless open network, wireless and Advanced preferences / TCP/IP... and the difficulty of IPv6. link-local only. Do the same for the ethernet if you use it.

  

  It is a lot more jiggery pokery, you can try, but the above is a good start... If you still find not reliable... don't be surprised.

  You may need to do more work on the computer itself. for example, to reset the NVRAM/PRAM/SMC... helped some people. A clean installation of the operating system is also useful if you update installed.

  https://discussions.Apple.com/message/29202159?ac_cid=ha123456#29202159

  Let us know how you go.

  The xfinity is a modem router then the TC will be in bridge.

  If you continue to have problems, I need a few screenshots of the configuration... that should correspond to what I posted.

• Install HP8600 offline after the new modem wi - fi

  I just installed new modem WiFi of Xfinity.  Two laptop computers and printer HP8600 are on the home network.  Both computers connect to internet just fine and a laptop prints to HP8600 well but other laptop displays printer offline and will not print.  Can anyone help? Thank you

  Danleyde,

  Welcome to the HP Forum.

  One of the things that you might try is to reinstall the software of complete functionality on the notebook where it does not work as expected - the installation process is smart enough and can sometimes clear up problems resulting from the change of equipment.

  Install the full features software - printer

  More detailed help is available for this kind of situation; Please look at the following suggestions:

  Replacement of your wireless router

  Click on the Thumbs - Up Kudos to show that you appreciate the help and time of our Experts.

  Although I strive to reflect best practices of HP, I do not work for HP.

  Click on accept as Solution when the answer is a good solution or workaround!

• I changed to a new modem, and now my speakers do not work, I unplugged and back is connected.

  My modem is gone blouie and I got a new modem installed by my provider, since this has been done I have no sound coming from my speakers, the power light is on, I unplugged them and they plugged back, still no sound, help!

  Hello

  Perform the following methods and check:

  Method 1:

  Tips for solving common audio problems

  http://Windows.Microsoft.com/en-XM/Windows7/tips-for-fixing-common-sound-problems

  Also run the fix from the following link and check.
  http://Windows.Microsoft.com/en-us/Windows/help/no-sound-in-Windows

  Method 2:

  Open the troubleshooting of Audio playback
  
  http://Windows.Microsoft.com/en-us/Windows7/open-the-playing-audio-Troubleshooter

  Let us know if it helps.

• How to reset AirPort Extreme 10.11.6 OS? How to work with this pinhole? I'm trying to get rid of this flashing yellow light, which began after I installed a new modem from Comcast.

  How to reset AirPort Extreme 10.11.6 OS? How to work with this pinhole? I'm trying to get rid of this flashing yellow light, which began after I installed a new modem from Comcast.

  How to work with this pinhole?

  Usually a paperclip or toothpick or ball pen.

  Stick it in the hole and reset for about 10 seconds until the front led flashes quickly.

  How to reset AirPort Extreme 10.11.6 OS?

  The software method... Unlike the above material method... is to open airport utility and select restore default settings.

  

  Both methods take you to the same place.

  You can also read the manual...

  Reset to a base station AirPort FAQ - Apple Support

• I just got a new modem (Arris SB6190) and now my Airport Extreme does not connect.  It worked fine with the previous modem (a rented one TWC).  Help!

  I just got a new modem (Arris SB6190) and now my Airport Extreme does not connect.  It worked fine with the previous modem (a rented one TWC).  Help!

  Always recommended to reset the airport back to settings by default and then set up again whenever you have a new modem or change your Internet Service provider.

  Turn off the new modem for at least 30 minutes. More is better.

  Perform a hard reset on the AirPort Extreme, then it turned off.

  Make sure that the Ethernet cable connects the modem to the "O" on the AirPort Extreme WAN port

  After the power of the modem 30 minutes down, turn on the modem and let it run for at least 5 minutes by itself.

  Then, turn on the airport and let it run a few minutes

  Set up AirPort Extreme again

  Important note... There are many reports of problems with the modem Arris SB and airports. Both are great products, but they do seem to work perfectly together for some users.

• installed a new modem router now I can't access my emails with my usual password.

  I have installed a new modem router, a Netgear D6300, now when I press the messages button get on my email account thunderbird, he invited my password which is normal. But when I enter my password that worked all the time it tells me that it is the incorrect user name or password. Of course, the implementation of my new router has changed something, please help.

  almost all Netgear routers have a firewall. Then log into the router. username Admin and password is probably password. If not these days they printed on the bottom of the router. Check the ports used for mail are not blocked.

• I have sporadic outages during anywhere from 1 to 5 minutes.  Everything started after I bought a new modem. TWC said, of course, that the modem is fine.  Any ideas?

  I have sporadic outages during anywhere from 1 to 5 minutes.  Everything started after I bought a new modem. TWC said, of course, that the modem is fine.  Any ideas?

  TWC does not yet support some routers, I hope they will be soon.

• I have a new modem and you want to configure my Apple Airport as a backup drive; How do I do that?

  I have a new modem from Verizon and want to configure my Apple Airport as a backup drive; How do I do that?  I need to extend the network, simply find a use for the airport.

  What is the brand and model of your new modem from Verizon? What is the exact model of your airport?

• Airport link to new modem

  Do TTrying to connect my AirPort Extreme for a new modem, I have to reset the airport, doesn't seem to work with the old modem. Help?

  It's always a good idea to carry out a new round of full power of your networking hardware during the change of equipment or Internet service providers. Please check the following Tip of an airport users for more details.

• How can I configure my router to a new modem?

  I changed my internet provider and I have a new modem. How can I configure my router to work with my modem?

  Hi @Belem,

  You can check out the link below and see if it helps.

  http://KB.NETGEAR.com/app/answers/detail/A_ID/22697

  Kind regards

  Dexter

  The community team

• DeskJet 6940: ethernet connection between the new modem and printer does not transmit Mac

  I just installed a new modem to Qwest; It works wirelessly with my iMac 10.11. My old (but functional until yesterday) Deskjet 6940 is connected to the modem via Ethernet. When I try to print, the document seems to be transmitted to the printer, but then it hangs on and I get the message "the printer is not connected" - which it is, plugged, ethernetted, and set in motion. Support of Qwest says that only 10% of the info from the computer are the printer, but he seems to think that the part of the new modem Ethernet is functional,

  I have already tried all unplug/restart/send/add printer new check/updates / IP (cannot connect) / ethernet ports and cables, etc.

  Any other ideas?

  Thank you!

  Hi @newgranny,

  Thanks for getting back to me.

  It is good that the printer has been able to print a diagnostic page.

  Ensure that the router and firewall on the market do not block these ports.

  • About the application firewall

  Ports of printing:

  • UDP ports: 427, 137, 161
  • TCP port: 9100

  Card photo upload:

  • UDP ports: 137, 138, 427
  • TCP port: 139

  The HP device status:

  • UDP port: 161

  Ports of Web Services:

  • UDP and TCP: 80, 443, 5222 and 5223

  Hello Ports:

  • TCP and UDP: 5353 and 5297, 5298

  Unplug the wired network (ethernet cable), restore the default values on the printer.

  Restore the default settings.

  Follow these steps to reset the printer to factory default settings:

  1. check that the printer is on.

  2. press and hold down the button to report Page.

  3 while holding down three times the homepage button, press the Cancel button.

  4. release the report Page button.

  Source

  • Restart the printer.
  • Connect the ethernet cable.
  • What were the results?

  If the problem persists, try the USB connection.

  Please reply to this message with the results. Good luck!

• I got a new modem and the router and now I can't print wireless.

  I have a Photosmart 8450 printer.  My operating system is Windows7.  I tried to follow the Scan doctor, but I guess I'm not tech savy enough to understand.  It worked fine before the new modem and the router.  She is 'offline' and I can't understand how to put line.  Thanks for any help and easy enough for me to follow.

  Hello raedene715.

  Thanks for the transcript, it was useful.

  Please, check the network cables and connections (side of the printer and router). If possible, try a different network cable.

  See you soon!

• Cannon MG3150 won't print after installing the new modem from TalkTalk.

  Original title: Canon m.g.3150

  After new modem from talktalk, my printer does not work

  Hello

  As Canon OEM is responsible for the good operation of the printer and their
  drivers provided. Check with Canon support, online documentation, and
  drivers.

  Good luck, you need to update or reinstall the latest driver.

  Canon - Support and drivers
  http://www.USA.Canon.com/Cusa/support/consumer

  Canon - Support - contact us
  http://www.USA.Canon.com/Cusa/consumer/standard_display/contact_us_consumer

  Canon - Windows - Vista and Windows 7 support
  http://www.USA.Canon.com/Cusa/consumer/products?pageKeyCode=windowsSupport

  Canon printer - page local confirmation - could be from another region.
  http://pdisp01.c-WSS.com/OS/

  ====================================================

  The main issue is probably the drivers, but these can help:

  Add or remove a printer
  http://Windows.Microsoft.com/en-us/Windows-Vista/add-or-remove-a-printer

  Solve printer problems
  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-printer-problems

  Open the printer Troubleshooter
  http://Windows.Microsoft.com/en-us/Windows7/open-the-printer-Troubleshooter

  Find the manufacturer's Web site
  http://Windows.Microsoft.com/en-us/Windows-Vista/find-a-printer-manufacturers-website

  Find and install printer drivers in Windows 7
  http://Windows.Microsoft.com/en-us/Windows7/find-and-install-printer-drivers

  Windows 8 - Fix printer problems
  http://Windows.Microsoft.com/en-us/Windows/printer-problems-in-Windows-help#fix-printer-problems=Windows-8&V1H=win8tab1&V2H=win7tab1&V3H=winvistatab1&v4h=winxptab1

  Windows 8 - How to troubleshoot printing problems in Windows
  http://Windows.Microsoft.com/en-us/Windows-8/How-to-solve-printing-problems

  Windows 8 - install a printer
  http://Windows.Microsoft.com/en-us/Windows-8/install-a-printer

  Windows 8 - find and install printer drivers
  http://Windows.Microsoft.com/en-us/Windows-8/find-and-install-printer-drivers

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

• New Modem - like get a new modem my printer does not work

  Since obtaining a new modem, my printer does not work. The printer is a HP 4500 wireless all-in-one. What should I do?

  Hi reillydebra,

  1. you have made no changes to the computer before the broadcast took place?
  2. do you get an error message?
  3. what operating system do you use?

  If you use Windows 7, try the steps from the following link:

  Printer in Windows problems
  http://Windows.Microsoft.com/en-us/Windows/help/printer-problems-in-Windows

  Why can I not print?
  http://Windows.Microsoft.com/en-us/Windows7/why-cant-I-print

  Additional information:
  Check if you need to open ports in the modem.
  http://h20563.www2.HP.com/p/_wireless/troubleshooting.html
  http://h10025.www1.HP.com/ewfrf/wc/documentSubCategory?tmp_rule=59455&tmp_task=solveCategory&cc=us&DLC=en&lang=en&LC=en&product=3919449