Y at - it a solution for the error-1074118651 (exceeds the size of the memory)

Similar Questions

• What is PXE - 61 media test failed error and the error PXE - MOF? What is the solution for this error? It's a lenovo with windows desktop

  I have a lenovo computer. I began as routine but unfortunately it says error:-what is media test failed error PXE - 61 and the error PXE - MOF? What is the solution for this error? It's a lenovo with windows desktop computer? How do I prevent this.

  Kala

  Hello Mohan,

  ·         You did changes to the computer before the show?

  These errors often occur if there are incorrect BIOS (Basic Input\Output System) settings.

  Method 1: Check if the computer startup options are changed in the BIOS. You can set the hard drive as the first boot device. In addition, make sure that this option "Wake on LAN" or one similar to it is off.

  Method 2: Load default BIOS (Basic Input\Output System) settings, and then restart the computer.

   

  Important : Change/update BIOS can be a complicated process, and if an error occurs, your computer could be rendered inoperative. Be sure to observe the instructions of the manufacturer.

• Solution for the mutation of table of error when using triggers

  Hello

  Could you please give the solution for the error table mutation during the use of triggers. I'll give you the simple scenario here,

  I created a trigger on the employees table, whenever all DML operations takes place in the employees table, it must run the trigger body. I intentionally used also of the employees in the body of the trigger table. Please give me the solution.

  Triggering factor:

  create or replace trigger test_trigger

  before you insert or update or delete employees

  for each line

  declare

  an employees.first_name%type;

  Start

  Select first_name from people where job_id = "AD_PRES";

  end;

  DML statement:

  Update employees set salary = 20000 where job_id = "AD_PRES" (I run this query)

  Error message:

  ORA-04091: table HR. Is the transfer of EMPLOYEES, the function of triggering/can not see

  ORA-06512: at "HR. TEST_TRIGGER', line 4

  ORA-04088: error during execution of trigger ' HR. TEST_TRIGGER'

  Can anyone tell, in what other scenarios, we get this error or recursive table mutation?

  Thanks in advance

  Hello

  When you create a trigger on a table, you cannot edit/query this table the trigger is not completed.

  You can use

  (1) transaction of Pragma autonomous

  (2) instead of row-level trigger, you have statement-level trigger

  (3) to 11 g, try with COMPOSITE trigger

  Try below to avoid it (a solution):

  create or replace trigger test_trigger

  before you insert or update or delete employees

  for each line

  declare

  PRAGMA AUTONOMOUS_TRANSACTION;

  an employees.first_name%type;

  Start

  Select first_name from people where job_id = "AD_PRES";

  COMMIT;

  end;

• I searched for a solution for the problem I was on Win 7 Pro Service Pack 1 in the links on an open Adobe Acrobat file will not open in my browser Firefox 33.0.2. The error I get is "Acrobat could not run the web browser.  Unknown error. (123).

  I want a solution for the problem I was on Win 7 Pro Service Pack 1 in the links on an open Adobe Acrobat Pro 10.1.12 file will not open in my browser Firefox 33.0.2. The error I get is "Acrobat could not run the web browser.  Unknown error. (123).

  You can try a repair of your Acrobat installation. Maybe, at least it's a start toward a solution.

• I found the solution for the problem of sound-acpi with Satellite P100-219

  Hello

  I found the solution for the problem of sound-acpi with Toshiba P100 (it works with P100-219 at least). I can provide the source modified and compiled table DSDT, but I would like to know if it is possible to get these changes in the next update of the BIOS?

  See you soon,.
  MIK

  Hi Mik

  As you know that it is not possible to find info on the next BIOS, especially if you want to have some information about the Linux operating system. Just wait and see if some forum users pointed out something on the subject.

• Does anyone have a solution for the use of Bible Illustrator 3.0 MS8 and MS7

  Original title: program programs Application Applications compatibility.

  Does anyone have a solution for the use of Bible Illustrator 3.0 MS8 and MS7

  What are the requirements of system for this program?

  What version of Windows it says on the package, it was designed for?

  If its designed for an earlier version of Windows such as Windows 95 or Windows 98 or XP, then it is probably incompatible with Windows 8.

  If the product packaging indicates anything in the 1990s OR early 2000s, I am afraid that this is not something that is guaranteed to work with Windows 8.

  You can try the following average time.

  Point to the installation files where they are.

  Right-click on the configuration file, and then click "troubleshoot compatibility".

  Wait, it detects the problem.

  Click on the option "worked in an earlier version of Windows.

  Select Windows 7 RTM or better Windows Vista SP2

  Click next

  Click Start the program, wait, it installs

  When the installation is complete, click Finish and save the settings.

• MS, what IS the solution for the ERROR CODE of 0 x 80240437?

  Looks to me like PERSON DON'T know what the solution to the problem is YET many people say online the fault lies with the last update from Ms.

  I just got a NEW laptop Gateway (NE56R41u) and it comes with bloatware to/from Windows 8.  The store said I need to 21 updates, yet all say that it cannot load due to this error code.
  So if nobody seems to have a solution, should I just sit and fiddle while Rome burns?  My solution is to delete everything that needs updates for and find one comparable application/software other than comparable MS/MS.  To see all the complaints and problems that have been created by the said error tells me that maybe there is no control of the quality at the top when it comes to release updates or solve the error in a timely customs codes.  Some of us have businesses where these codes are an obstacle, perhaps even bad, but no one knows what to do.
  If there is an answer, of course, I'm going to see/read the solution for it.  I'll even write back and say "Alright, it works now!
  I will say that States out constantly updates without checking and adding more noise to its 'small box only enlarges the problem... ".
  It is MY FIRST point in this place and I am disappointed... later, people!

  method 2 worked for me. Thank you very much! Very grateful!

• What is the solution for the error... rundll32.exe is not a valid win32 application

  Please tell me the steps to resolve this error. Thank you

  Hello
   
   
  1. have you made changes on the computer recently?

  Method 1.
  We forst launch a virus online scan. Sometimes the security program installed might not be fair enough. I also recommend you update your security software regularly.
   
  a. follow the link below to start the free online scan:
  http://OneCare.live.com/site/en-us/default.htm

  b. run the malware removal tool from Microsoft.
  Microsoft Malicious - 32-bit removal tool
  http://www.Microsoft.com/downloads/details.aspx?FamilyId=AD724AE0-E72D-4F54-9AB3-75B8EB148356&displaylang=en

  Microsoft Malicious removal tool - 64 bit
  http://www.Microsoft.com/downloads/details.aspx?FamilyId=585D2BDE-367F-495e-94E7-6349F4EFFC74&displaylang=en

  
  Method 2.
  Check to see if the problem exists in Safe Mode, if the computer works as expected in mode without failure, then we can solve the problem in the clean boot state.
  a. refer to the article below for the procedure safe mode in Windows XP
  A description of the options to start in Windows XP Mode
  http://support.Microsoft.com/kb/315222

  b. you need to perform a clean boot to find the program that is causing and then disable or remove.
  How to configure Windows XP to start in a "clean boot" State
  http://support.Microsoft.com/kb/310353/en-us
  Note: When you are finished troubleshooting, follow the steps as explained in the article to reset the computer to start as usual.

   
  I hope this helps.

• E3000 with the same problems on & more here, but no expert solution for the 2 main problems

  

  1 - with regard to support USB connected hard drives that will not transfer data & like to come & go quite often of the view.

  Everything seems like a joke to me, when I read that a lot of people have hard drives USB who worked for a year, & when it stops working or acts upward, we all have a test to see if it connects & works very well on our other connections PC/Laptop & the only advice given, this firmware is upgraded or a list of hard drives that have been tested and work on the E3000.

  2nd - my other problem is that my E3000 now decides of its own to disconnect wireless & cable Communication and then reconnect alone, whenever you feel.

  What makes angry of this problem is that it is abundant in the Forums & I tried all the fixes, but I still have the same problem & sound as good as this device of 2 year, Max is grilled.  As is the case when there is a loose connection that overheated, in what thread or welded metal move when heat is added & move at the time where the heat is removed.

  PROBLEM:

  My touch 1 Maxtor (from the approved list) is connected and playing now you see me & now you don't game.  If I ever try to import or to export any image file or music, the Communication goes & then sometimes will return its own. Working with Game Consoles, when something begins to work intermittently, then it is a hardware problem or software with the device.  It is not a user error, when it worked fine before.

  SOLUTION?:  This is why we are all here. Thanks to a landmark of expert for the same problem that many of us have?

  How about this solution. Why not let all E3000 owners send there wireless routers is not working towards a credit for a new operating model nice. I think that we would all save a lot of headaches & get rid of 25% of all calls for help on this forum.

  Thank you for your attention,

  BigdogTim7

  PS. Please give us/me expert advice on how to solve the problem.  If nobody knows the answer, then Cisco/Linksys looks really bad for selling a router high of $$$, being touted for the games and files sharing multimedia home & it only at this stage.  If it should be recalled, will bring up by all means, or come up with a fully functional firmware.

  Thanks again & hope to hear news good & productive, cause I am so tired of playing with this E3000 & will more than likely stay away from your product for any & all future purchases, no matter where you are ranked (E3000 was 3rd & best prices of the top 3 when I bought it).

  Well, I'm here, not having heard an assumption about my problem, but to get an opinion of experts & solution to my problem, but also all other users of the same or very similar problems.

  I am now a HAPPY 'Belkin N600 DB' owner for only $79.99 @ Wal-Mart/Radio Shack. This new does much more than the Cisco E3000 wireless router & even changed my Modem 100 MB (green) flow out of 1000 GB (Amber Light).

  So, so HAPPY now!

  Bigdogtim7

• Solution for the Photosmart all-in-one 7520e Center

  I bought a Photosmart 7520e printer and installed the software from the CD that came with it.  Everything worked ok except the solution Center.  He said that the installation was complete.  I went to hp.com and download the full version and went off the center of the soultion.  Also, there is a firmware update available, I downloaded it, but it would not install.  Where can I download the solution center to and how do I get the update of the firmware to install?  I'm running Windows 7 Professional 64 - bit on a Dell Insiron 530.

  

  I call this series printer HP Photosmart 7520 in my last post, so I apologize for the mixture to the top. In the future the desktop icon and the circled file will open you to the same place, the Printer Wizard.

  Insofar as it opening in Notepad, I have a document from HP: HP Printer Wizard opens with an error in Script or in the notebook that meets that.

  Try to install the update for the firmware directly from the front panel of the printer. Tap the Web Services > settings > Product Updates > search for updates of the product now.

• Need the best solution for the special case

  My version of oracle is 11.2.0
  
  My name of the table is nitkhush and have a column named long_string of long data type
  
  The values of the tables are
  
  LONG_STRING
  
  Vincent
  Murali
  Bharath
  Nitesh
  Perron
  Married
  
  
  I know its not appropriate to use the long type, but again I want to understand the concept, so I've used and should
  output is
  
  
  Vincent Kumar
  Murali Kumar
  Bharath Kumar
  Nitesh Kumar
  Perron Kumar
  Married Kumar
  
  
  I tried this query
  Select 'Kumar ' | long_string nitkhush but error is ORA-00932: inconsistent data types: expected NUMBER got LONG so I tried to convert in varchar2 pl/SQL
  
  DECLARE
  LONG temp_long;
  temp_var VARCHAR2 (4000);
  BEGIN
  SELECT 'Kumar ' | long_string
  IN temp_long
  OF nitkhush;
  
  temp_var: = SUBSTR (temp_long, 1, 4000);
  Dbms_output.put_line (temp_var);
  END;
  
  but still unable to do as I thought store at length and then using SUBSTR function it will convert and store it in a variable of type varchar2 data but it does not, and according to my knowledge CAST do not long support for the conversion of varchar2 so someone can give me best solution but I need complex queries wholesale as it should be as short as simple to understand so that all the world can understand it easily... And also through the procedure, I tried so that execution of the procedure but still unable to... I tried throgh procedure also all as written above...
  Thank you
  Nitesh Perron.

  If you have to / want to change the default value of a column, you should not update the system tables but use an alter table command
  And by the way, it works

  begin
    for r_col in ( select *
                   from user_tab_columns
                   where table_name = 'MY_TABLE'
                   and data_default is not null
                 )
    loop
      dbms_output.put_line( r_col.data_default || 'Anton' );
    end loop;
  end;
  

• I FOUND THE SOLUTION FOR THE TX WIRELESS PROBLEM!

  Hi guys,.

  IM pretty happy problem because I found the solution for my tx 1219 us wireless!

  First of all, my laptop started with wifi problems. Then, when I tried to start, nothing has been posted.

  I read a lot of posts on forums that talking about changing the motherboard by HP.

  I sent my knees to HP in Argentina - where i live - and they had sent me a budget with a «renewed» system map

  I was paying, so I pretend a new.

  Tired and frustrated on the HP customer service: they dosen´t recognize their mistake. They dosen´t give me GUARANTEE AND they pretend a lot of money for something refurbished!

  I found a post where a guy - now away for me is 'God' - explains how to fix this problem yourself! AND a lot of positions where other guys did, and they confirm that it works!

  Here's the method. Feel happy!

  This post is for the repair of the range of following HP laptop: tx1000, dv2000, dv6000, dv9000, with AMD processors and graphic chips from nvidia (6150go).
  Symptoms are more, wireless wireless card are running out, are repeatedly, the laptop, it does not ignite until several attempts and finally the laptop turns on but he did not have no image in the monitor, in some models, you listen to some sounds.

  The cause is excessive overheating of the GPU from nvidia, which has powered up to 100 degrees or but tends to fail the welds that unite it to the mother of the card.
  HP already admitted the existence of the failure in the design of the card, and extended 2-year warranty, so that if even you can demand but the desirable thing is to do, the method I describe is simple and has worked in 100% of those laptop with this problem, prefer all must do it under your own risk.

  Step 1. -It is necessary to compile the necessary material: this is a 1-cent American copper currency or a currency that similar thickness now about a 1/16 of an inch, or a piece with these features, but the copper. also we will need a table lamp with a halogen centre, or the one with the normal centres but it is 150W or but case is that it heats up a lot. disipadora thermal paste of what they take microprocessors (sold at any electronics store).

  step 2. -Once gathered our components, it is necessary to remove the mother card and remove the radiator so that they are exposed to the microprocessor and the nvidia chip.

  Step 3. -Now, we are committed to the lamp, started to warm up a while, in my case I have tapeworm a gun to measure temperatures and saw that it was 134 degrees, once it is hot we close set, but the thing at latest, the graphics chip, but on the other hand, where all the solder points are seen We leave about 5 minutes, which were both that I gave him, no doubt, it can be less, depending on the source of heat, once that done this we have pressed with the fingers with force the graphics chip (care, it will be hot), which will be expanded by heat welding is to merge.

  Step 4. -Now, we put a little disipadora in the room by both parties and we placed on the graphics chip and put the radiator and arm!

  It is with the intention of wrong correct dissipation system design since the heat produced by the chip is transferred to the coin in copper.

  Copper is an excellent conductor of heat and thus provide the heatsink of makes, initially was clearly a very small between the radiator and the chip and when warm itself does not transfer not warmth to any party since not thanks to the air, it can, but the copper coins made this work

  Greetings

  Message edited by Wendy on 30/04/2009 21:02

  Please see the procedure on YouTube

  http://www.YouTube.com/watch?v=musu759LsT4

  Message edited by Wendy on 30/04/2009 21:02

• Is alcohol the best solution for the cleaning of the product

  Sometimes you print quality problems. You cannot print the colors, bad impression or bad imagingin during the scan images.

  You go through all the troubleshooting steps away as cartrides, glass, rollers of the printer cleaning and replacement of cartridges.

  Ask yourself what you should used during the cleaning of the unit?

  WATER and a LINT cloth, would be the best solution for cleaning. You can absorb the water on the cloth and clean the printhead, cartridges, the scanner glass, rolls and any other area that needs to be specific to the unit.

  ALCOHOL IS NOT AN OPTION. This can damage the strips and the contacts on the cartridges and the print head. The next time you need to clean your product, water is the best option.

  Hope this helps everyone.

• W510 - Security Solution for the Client ThinkVantage®

  Will there be the ThinkVantage® Client Security Solution for W510? I know that the W500 series has the client security solution. The W510 will have this?

  ThinkVantage client security is good Manager password, advanced security and animals. A must have but for Thinkpad user. I use password with firefox fair Manager.

  Solution!

  http://www-307.IBM.com/PC/support/site.WSS/document.do?lndocid=MIGR-73696

  Works perfectly!

• Any solution for "The Audio Service is not running"?

  Searching high and low on the Internet, I can't find a solution to the difficulty of the notification in the status bar:
  "The Audio Service is not working" even if my audio works.  I find that this problem exists for many people using Win7.

  I just found this link that Microsoft provided, (which means that it is indeed a problem acknowledged by Microsoft), but without any real fix.
  http://support.Microsoft.com/kb/2011656

  Hey, someone from Microsoft can we give a hint he will never be a solution to this?

  Thank you.

  Reach:

  Control Panel > administrative tools > view local Services
  It's the "service" window, it lists all system services. Find "Windows Audio", NOT "Windows Audio Endpoint Builder.
  [just click on any service, then press the letter 'W' on your keyboard, will need you the services starting with the letter 'w']
  Right-click on the "Windows Audio" service and choose "Properties".
  You will see 4 tabs, click on the last one, titled "dependencies".
  In this tab, you will see the box "this service depends on the following system components", it displays 3 services
  Next to each service, there is a "+" icon, click on it to expand the list. 2nd service 2 child services, the 3rd service will be 1 serving children.
  Now make sure that all 6 services (3-hand, 3 children) have the status of "started" in the "Services" window you opened earlier
  Most propably you will find one of these services don't work, just start all the, then try to start the service "Windows Audio" in the tab "general".
  That's all