ACPI temperature is bad after hibernation

Similar Questions

• Access Wi - Fi bad after hibernation or standby

  I have the Satellite A80-127. Once sleep extended or standby, the internet does not start if the ' wireless networks shows be connected. " However, once I restart the laptop it works fine.
  I tried to reconnect to the wireless network (switch on OFF too) without success...
  Can someone please shed some light on this.

  Thank you!

  Hello

  You can try to repair the connection.
  Right-click on the WLan icon in the taskbar and choose repair.

• Satellite Pro L300 will not connect to Wifi after hibernation

  Hello

  can someone there help me please?
  I have a Satellite Pro L300 and it does not connect to Wifi after hibernation.

  The only way to do it is to restart the pc.

  Any suggestions?

  Hello!

  I m using a Satellite L300, which should be similar to yours and I peut t noticed this problem. WiFi works perfectly without any problems.

  In any case, I would recommend updating the driver WLAN and the BIOS. The two you can find on the Toshiba site:
  http://forums.computers.Toshiba-Europe.com-online decision-making supported Downloads & => Download drivers

  In addition, you run the factory settings or you have installed a different version of Windows?

  Good bye

• Satellite Pro A210 - keyboard and touchpad stop working after hibernation

  I installed Windows 7 (32 bit) on my Satellite Pro A210 and have a similar problem. When it starts OK but after hibernation the keyboard and touchpad stop working after 3 minutes. The only way to fix it is a re-boot of the force.

  Anyone have any ideas?

  Hello

  You have installed all the drivers for your laptop? I mean especially the chipset driver.
  Check this box!

  If you have yellow exclamation points in Device Manager, you must install all the missing drivers.

  Last but not least don't forget to install all Windows 7 updates available that you can get thorugh Windows Update.

  Sorry, but that's all I can say at the moment

• Satellite M70-148 - power on problem after hibernation

  Hello:
  Sometimes, I have a problem I can not turn on after hibernation. The fan starts, but the computer does not start again. I can only turn off again by pressing the button for a few seconds. When I remove my power cord and press the power button, I am able to start up. I can solve this?

  I've been on the internet looking for a solution and found this description of the problem, which is exactly what I have, but unfortunately there is no solution.

  "
  I'll explain the problem in detail, right after hibernation or standby IF you press power button / stop it goes blue led fan starts, HD led lights, led battery, power adapter led (if its connected) and a cd player make it sound as if he looking for a CD, and THEN stopped fan HD led turns off, no sound from CD, leaves u with button only works / stop led on, a pretty frustrating blue

  After waiting, u eventually gave up, turn it off by prolonged pressure on the button / stop and then no matter wut u do, simply starts only even the sounds and the leds as mentioned above, nothing on the screen as if its dead! No logo, no nothing.

  Give him a time (about 15 min with battery connected, or 5 minutes or less with the battery) press the button, IT U - GO, works perfectly!

  same case with the judgment but not always as put into hibernation and sleep (but once made wake-up from standby mode!), but most of the time after the judgment, you have to wait 15 min!

  No memory connected USB flash or something else!

  I have installed winXP pro SP2 above and installed the drivers and the Microsoft HOT fixes too, but the problem remains.

  I also made recovery from the CD of restoration which follows, also not good!

  I noticed that if you disconnected the battery the appliance needs less time to wake or boot. about 5 min.

  what kills me, is that the device works perfectly and I love it! I've had this problem with her!

  So what I need to know is the following: is there anyway to weather course if it's a hardware or software problem?

  its not easy to go to service local cuz its in another city! I need to try first what it takes to fix it on my own!
  "

  Thank you for your time!

  Well, there's not much to do. You have some many possibilities. Check your installed BIOS version and compare it with the version on the Toshiba site.
  If there is a newer version so you can try to update the BIOS. But please be careful.

• Touchpad stops working after hibernation on Satellite M40

  My laptop M40 has just started having a problem with the Touchpad is, after hibernation the touchpad does not work. plug an external mouse works, I tried to disable and re activation via the control panel but it doesn't help. Switch off and then again on fact fis the Thinkpad, someone has seen this before?

  You said that this problem started now. It seems therefore that this issue was not present in the past. Am I wrong?
  So, if I m right then it looks more like a problem of software like a hardware problem.

  Usually, the first step should be a new touchpad driver installation. Then you might try to update the Windows XP operating system to the last State. You must use the Microsoft Update page to get all the fixes.

  Then download and install the tool called CCleaner. Its free and it s very useful to clean the operating system and the registry.

  If this is not enough, try to reinstall the OS from the recovery CD and test if this problem persists after installing new OS.

• Equium - dead after hibernation, the system recovery does not work

  Hello
  I'm trying to fix the laptop of one of my friends, but so far without success. It's a Toshiba Satellite with Vista.

  She had problems with a black screen after startup in Windows Vista. I found a work around for this problem, but it was a little complicated for her... She doesn't know much about computers. ;)
  So I but it would be a good idea to tell him to always use hibernation. However, when I put the portable standby extended, all seemed fine, shutdown, power off.
  I tried and then turn it back on. Light turns green, cd drive makes noises. Nothing more. Screen remains completely black. No sounds. Keyboard input does not work. No access to the Manager startup or anything else. He left light until I pass him by pressing the button for a few seconds.
  I removed the battery and put back in place, without result.
  Connection to an external monitor shows no results.
  When I put the original CD recovery Toshiba, no results.

  So, basically a cell phone dead. Ah yes, I'm in the Brazil in a small village, away from the stores of tech support or computer. Maybe a problem material, but all was working fine until I used the hibernation.

  Any help or ideas would be very appreciated! ;)
  Daniel

  Hello

  My laptop could not wake up after hibernation too but I managed to wake up again.
  This;
  Disconnect the power adapter and remove the battery.
  Now, you will have to wait a while 1 hour should be sufficient, but you can leave the laptop disconnected for a longer time (all night long)

  After that, you must connect the battery and AC adapter and should try to light the device if it will not help you then you are in trouble
  This would mean that a serious hardware problem causing this problem and I doubt you could remedy without any help from the ASP.

• Tecra S1: OS cannot recognize the CD Rom after hibernation or standby

  Hello world
  I have a problem with my laptop Tecra S1 and the operating system Windows XP Professional. My laptop can not recognize the CD ROM drive after hibernation modes or in sleep. And when I checked the status of the device, he told me this message "Windows cannot load the driver for this hardware device because a previous instance of the device driver is still in memory. (Code 38) ». I tried to uninstall the driver and install it again, but it did not help. And if I restart the computer then the problem is solved but y at - it someone knows how to fix this problem without having to restart the laptop?

  Thank you very much

  B. regards
  Wael Devaud

  Hello

  Maybe this article can help you
  http://support.Microsoft.com/default.aspx?scid=kb;en-us;316575

  Good bye

• Satellite L650 - screen Get back after hibernation

  First time the Toshiba user and am on information overload. When the screen is put in hibernation, I gently press the button to return to the screen. Other methods such as drag the hand on the pad (I don't know what it's called) does not work as it does with another person using the same model. Also, I put my profile as "locked" instead of hibernation, so this may be the problem. Could not find a way to change. I have this Toshiba menu marking but watched most of the places.

  What do you usually after hiberbating to restart. ? Can anyone help please?

  Hello

  Your ad is a bit confusing and I have to say that you can return the laptop after hibernation mode if you press the power button. I put t really know what you mean with passage of hand on the cushion. It turns out if the laptop is in hibernation mode, you must press the power button to start it.

  If you have any other questions, just after again.

• Satellite L30-115 returns after hibernation too early

  Satellite L30-115.
  The lid switch opens even slight movements (with the lid closed). What makes my book out of hibernation.

  Energy saver, I put to enter the Hibernate when I press the power button and do nothing when I close the lid. So I expect to do nothing when I opened the lid, too.
  The laptop still exists, after hibernation.

  Is this a bug in the BIOS, normal behavior, is there a place to put not to resume when I open the lid? BIOS and energy savings are updated recently.

  Thank you
  Dan

  When the lid is closed the small switch will activate and laptop knows what lid are closed. Light moves this contact will be interruption and laptop think the lid is open. Because of this, your mobile PC wakes up from hibernation mode.

  A few minutes ago I tested how reacts a Satellite phone and also my new Vista preinstalled Satellite P200D preinstalled old WXP. I did the same settings that you are, and the result is the same. After the opening of the notebooks of the lid to wake up from hibernation mode.

• Satellite L10-202 begins after hibernation without opening the lid

  Hello

  I have problem with start up after hibernation. When I close the lid computers go into hibernation. It's OK. But when I opened the lid it starts. Sometimes I don't even open the cover. I just take over and it starts.

  It is not critical, but it's very uncomfortable because when it is in hibernation, and I take it and move in a purse or bag it lights. Is it possible to configure something he'll start when I press the power button / stop and not when I open the lid?

  Hello

  As far as I know the Toshiba Power saver is responsible for the hibernation and the day before.
  In this case, I recommend first reinstall the Toshiba Power saver.
  Check it out.

• Satellite P200-1I4: no sound after hibernation

  Sorry for my English.
  There is no sound after hibernation mode. Audio device seems ok in Device Manager, but sound only appears after reboot.

  Hello

  It is certainly a problem of Vista.

  I remember that Microsoft has released a hotfix for this problem.

  Download and install the hotfix 937077 from the Microsoft Web site:
  http://support.Microsoft.com/kb/937077/en-us

  Good luck

• HP Pavilion 13-b000no: no touchpad after hibernation

  I have (always been) a problem with my laptop HP Pavilion 13.
  My touchpad does not work after hibernation.
  I need to remove the touchpad in Device Manager and restart to get it working again.
  
  HP Pavilion 13-b000no
  Model: J1X18EA
  Latest version of the BIOS: Insyde F.35
  Synaptics TouchPad SMBus, Driver: 19.2.4.10

  I know.

  And that's the point. I would like that it works under Windows 10, which does not seem possible.

  I give up. Detective Conan.

• My laptop lost wireless connection after hibernation I or stop it. Then I have to reset the automatic Wireless Configuration to find my wireless connection

  I just bought a new NetGear wireless router and now my laptop lost wireless connection after hibernation I or stop it.  Then I have to reset the automatic Wireless Configuration to find my wireless connection.  Whenever I stopped him it and I have to choose.  This does not happen on another laptop or desktop that I have.  Is there a safe solution for this?

  Hi Ron,

  1 Windows operating system you are using?

  2. you receive messages or error codes?

  You can read the following article and check.

  Windows wireless and wired network connection problems

  If you use Windows XP, then read the following article:

  How to troubleshoot wireless network connections in Windows XP Service Pack 2

  This problem can also occur when the power management profile turns off your network card.

  You can try the following steps and check if it helps.

  a. click Start, type device manager in start search and press ENTER.

  (b) in Device Manager, expand network adapter.

  c. now you will see your network adapter or adapters if you have more than one. Right-click on the network component, and then click Properties.

  d. go to the power management tab.

  e. ensure that all check boxes are unchecked (check boxallow the computer to turn off this device to save power is off).

  f. If you have disabled the boxes, click ok and restart your system. Put the computer in Hibernate mode and check if you still have any questions.

• Windows 7 laptop do not again after hibernation when disconnected

  I have a laptop Dell Alienware M11x with Win 7 Premium, Intel U4100 1.3 GHz processor, 4 GB of RAM and graphics "Mobile Intel 4 Series Express Chipset Family" (although I thought it was NVidia).

  I have the settings configured so that the cover Hibernate the computer, and when Windows resumes after hibernation, it will work find if the laptop is connected to the power grid, but when running on battery and the recovery of the computer will freezes after showing the "Windows Recovery" just before the GUI is due to appear, but rather only shows a black screen with a blinking cursor in left top.

  The only way to solve this is to force a stop and turn the computer back on again - which will later be a screen 'continue with restore CV/remove... data. ». If I plug the computer and choose to continue to use it, it works perfectly, but if running on battery the only way to continue is to delete the data and start again.

  I had a glance online at other similar problems, but so far none has sorted mine.

  Thanks in advance,
  Tom

  You might want to consider this repost in a Windows 7 forum, this forum supports Windows Vista and there may be significant differences in this area between the two operating systems.

  writing in the new message: * e-mail address is removed from the privacy... *

  I have a laptop Dell Alienware M11x with Win 7 Premium, Intel U4100 1.3 GHz processor, 4 GB of RAM and graphics "Mobile Intel 4 Series Express Chipset Family" (although I thought it was NVidia).

  I have the settings configured so that the cover Hibernate the computer, and when Windows resumes after hibernation, it will work find if the laptop is connected to the power grid, but when running on battery and the recovery of the computer will freezes after showing the "Windows Recovery" just before the GUI is due to appear, but rather only shows a black screen with a blinking cursor in left top.

  The only way to solve this is to force a stop and turn the computer back on again - which will later be a screen 'continue with restore CV/remove... data. ». If I plug the computer and choose to continue to use it, it works perfectly, but if running on battery the only way to continue is to delete the data and start again.

  I had a glance online at other similar problems, but so far none has sorted mine.

  Thanks in advance,
  Tom