Y510P issue of parameters power (SLI GT 755 m)

Similar Questions

• y510p issue replacement of hard drives (no SLi)

  I would like to replace the hard drives on my y510p and bought a 1 TB HGST 7200 RPM for the essential and crucial m500 240 GB 2.5 SSD to replace the 24 GB SSD that is already there.

  Now around reading it seems that I won't be able to do it easily? I absolutely do get a HARD drive caddy and remove the DVD optical drive to use this SSD?

  42 mm

  http://www.Amazon.com/MyDigitalSSD-Super-cache-solid-state/DP/B00EZ2E8NO/ref=sr_1_3?s=PC&ie=UTF8&QID...

• Issue of parameters: encode iPod tweeked used to synchronize to the touch

  We used these settings below in the compressor, the same definition in Media Encoder 5.5.1.12 (ME) and the README file resulting sync with an iPod Touch from iTunes. (tested only with the touch 3rd generation)

  Additional parameters in ME: Hand, 3.1, get depth Max, quality rendering using Max, VBR 2 pass-1, 45-3 Mbps.

  As I understand it, is not the official Apple spec, but it works in the compressor.

  Original files are a project published in first exported 5.5 format ProRes HQ 1920x1080p

  Tab encoder compressor

  File formats: H.264 for Apple devices (by default, m4v)

  (Default) device: iPod/iPhone VGA

  Aspect Ratio: 16:9 (640 x 360)

  Frame rate: 29.97 default

  Flow: 1500 Kbps (real final encode w / audio is 1714,42 Kbps)

  Audio: 256 Kbps, 44.1 khz

  Frame synchronization: 5.0 seconds

  Options: 'multi-pass '.

  Sounds as if it was the value which has been shifted upwards the iPod then. Glad to know that the problem is solved.

  > Seems to me, that is it not automatically change the size of the pixel.

  Feel free to create a bug report on the issue. I agree with you, to a certain extent; There is a design problem that values speed and the size of the image can be valid for the new level when the value is changed, the application may need to meet the demand of the user in some way. The current behavior is to change the size of the image at any time value, the value is changed, and it is unfortunately a rather blunt, overall solution. We could do better here to make it easier for the user.

  > However, blacks look a bit crushed, I couldn't find a gamma adjustment, is it possible to change this?

  No, there is no order of passage in gamma on the release of the SOUL.  Feel free to file a feature request if you want to see such a thing in a future version.

  You asked above also lost matches to detail when transcoding HDV to ProRes format. I don't have a good idea about what is going on. Post some samples would help, but you can also ask for more in the Premiere Pro forum, which gets more traffic than the forum of the SOUL, and there are probably more insight with this type of workflow.

• Issue of standby, power code: 0x7E - Satellite U300 - 14 p

  I just bought my Satellite U300 - 14 p and installed windows XP SP3 0.5508 (deletion of Vista that comes with it), with a custom Windows XP, boot disk made with nLite 1.4.1 (to include the SATA driver and set up my preferences, such as themes, etc.).

  I followed the instructions (installation order) that are on the Drivers Toshiba Download Page and everything goes well until installing "TOSHIBA Power Saver"(v7.03.07Q)".
  The installation seemed to go very well, but at the end of it, the "critical stop" sound error of windows rang and after go to the control panel and try to open TOSHIBA Power Saver, I get the message:

  "CANNOT be opened because you do not have access rights to use 'TOSHIBA Power Saver'."

  I am the only user of the computer and admin, so I don't get this message.

  I tried to uninstall it but I get the message: "a fatal error has occurred. The program will end. "Code: 0x7E.

  Any help?

  EDIT: I forgot to mention that, now, every time I start windows, the "critical stop" sound games and he started that after I installed energy-saving

  Post edited by: Cinetyk

  Great! Thanks for this detailed!

• New issue of electric power connection

  I just replaced my PSU with a coolmax v500 and new connections to the motherboard came with the additional connection 4 pins. The original power supply had not well that the motherboard has 14 pins decision-making

  My question is this. Can I plug the 4-pin or leave it disconnected? Currently, I have not plugged and everything works fine.

  Thank you in advance for your help!

  Steve

  HP A63133W

  Steve, if you're talking the main ATX power connector, it's 20 pins or 24 pins, like you said.  If it's the 24pin, you would connect the connector 4-pin.  If it's the 20 pin, you don't connect it.

• Issue suplly of power of the Satellite 1410-303 - need motherboard

  Hello!.

  Sorry for my English to pay so I will try to be as accurate as possible.
  I have the laptop above and it burned its built in 'diet '.
  As a computer scientist friend told me. And now I have to change the entire motherboard.
  Does anyone know where to find a new or used motherboard?

  Thank you!

  What to say to check some offers on the site of grand, public and famous auction ;)

  Or will contact the ASP in your country for a new compatible but it is a very expensive solution because the MB is one of the cost elements for laptop.

  Then maybe a second hand laptop might be a better solution

• Windows Update - does not issue KB26041111 after power on

  I have auto update turned on and I get a "updates are ready for your computer" in my taskbar.  I try to update, and everything seems fine.  Then in a few minutes, I get the same message for the same update.  How can I get the update to work on my computer?

  Thank you...
  Jerry

  Hello

  I suggest you to follow the steps from the link below and check if it helps:

  Troubleshooting Windows Update or Microsoft Update when you are repeatedly offered an update

  http://support.Microsoft.com/kb/910339

  Hope this information is useful.

• Issue of consumer power a1

  Running 4.0.4 android, with flight mode on, always on wifi and bluetooth off.

  I turned it on 3 hours on a full charge. I do not use it, it was in standby for 3 hours.

  Now, when I watch the news of the battery, the energy in the last 3 hours is as follows:

  -. eve of cell of 82%

  -. 8% android OS

  -. 5% wifi

  -. 4. compressed % idle

  -. screen 1%

  My question is: is 82% of cells normal sleep? How do I turn it off to save energy?

  Thank you

  Watch cell is essentially an idle process. There is currently no way to remove it. Lenovo of Android versions are versions of telephone vs versions of the tablet. If it was a version of the Tablet would not this process. . And Yes, what you see is normal.

  As I understand it, there are a few people enterprising aross the pond who are still working on a CM10 of Android for the A1 version. They indicated that when he's ready for the liberation they will let us know. For now, it is what it is. Lenovo has apparently abandoned all development and support, beyond service of the A1 and the A1107 warrany.

• Issue of parameters or a bug in Flash latest version plugin (16.0.0.305)?

  Intel Socket LGA 2011 | 32 GB of Ram

  Windows 7 64 bit

  IE 11.0.9600.xxxxx

  Flash Player (Active X Version) 16.0.0.305

  Description of the problem:

  Right click video Flash, put into storage on the Site

  Try to adjust the amount of storage site. PRIOR to the creation of the site to "allow" I was able to adjust the value, but which allows the site to store information, try to adjust the amount allowed AFTER freezing as mini pop up on the screen and will not allow the setting of the slider of the stored value.

  The problem is related to our anti-clickjacking logic.

  The dialog box is to come because you have defined a default setting in Flash (probably restrict the ability of sites to store local shared objects on your computer).  The best way to work around this problem is to simply get rid of the dialog box while allowing LSO.  You can do this by going to control panel > Flash Player > storage > allow sites to record information on this computer.

  This command comes from way back in the 90s, when marketers were abusing the ability of Flash to track the behavior of the consumer by storing unique identifiers.  While this technique is still used to some extent, the HTML5 features and fingerprints on the server side far exceeded utility of Flash as a technology of follow-up for traders in ease and resilience.  So, while you can always disable the LSO on your computer, it offers very little in terms of privacy, in 2015, and it decreases significantly the experience of the user.

  When you don't want to use Flash Player without accumulation of information that could be used later to follow you, use rather a your browser's private/Incognito browsing mode.  Flash Player is still allowed to store things on your computer (so the content works as expected with no degradation in experience), but it will in a temporary location that is destroyed when you exit the browsing session.

• P2V server - issue of parameters specify Destination

  I'm doing a P2V of a server. I want this virtual machine to run later on a stand-alone ESXi server. But I don't have to the top and turns yet. So, I just wanted to create a virtual machine, that I can add to the ESXi server later.

  When you perform the conversion, specify the Destination tab, there is a VMware product select. ESXi 4.1 is not listed. Should what choice I choose?

  TIA.

  Under convertPhysical of Windows 2008 - physical configuration at the Workstation 6.x

  Step 1

  The source type - physical computer

  The source - this local machine connection

  Data source - select disk

  Step 2

  Destination - Next

  Destination data - other virtual machines

  Name location & - Set name and location must be NFS (choice Workstation 6.x)

  VM option - choice what you need.

  Ok

  Workstation to ESXi

  Choice point and another to VMX - source type

  If you have found this information useful, please consider awarding points to 'Correct' or 'Useful'*.

• Y510P and Directx12 - we have NEW ULTRABAY GPU? (GpuMix)

  Hi guys, I have recently updated my windows at 10. Thus, it comes with the Directx12 version. I heard that DX12 will not even bi - GPU for SLI. Even an AMD and Nvidia cpu may collaborate as sli. So im wondering is it new ultrabays compatible gpu (such as gtx770, 880, 970) for housing ultrabay Y510P? I know y510p has a 170W power limits, but perhaps manufacturers could optimize. Maybe they focus the energy required for ultrabay slot with ignorant gpu real or by lowering the real power gpu. Thanks for the support...

  NEW: 980M GTX must be able to 122o. If its does not seem possible to be fit y510p.

  NEW: GTX 970M need 81 W power so that double gt755m Burns 100W with sli.

  NEW: I wonder too, y510p has MXM thing on gpu? Who can change you your primary gpu.

  OK here it is, I have to play all the games on the resolution of 1920 * 1080 .

  Dragon Age Inquisition - 35 to 55 fps on med/high settings - Nov 2014

  Shadow of Mordor - 35-50 fps on med/high settings - seven 2014

  Other than these 2, I'm agree most of my collection is first games 2014 or late 2013, as the metro: rays, Bioshock Infinte etc. I'll be buying GTA V, The Witcher 3 soon (when they go on discount). I think Dragon Age to be quite intensive graphics, and it has beautiful effects.

  Have you checked your time CPU and GPU all in game?

  You use the latest NVIDIA driver?

  I never said things are "impossible". I said that it may not be considered in a future close because most of the games are already in the development pipeline. I don't think that the Bethesda will go back and support Fallout 4 for hybrid cards just because win 10 came out.

  Mafia 3 coming next year 2016, I don't think they'll add that are no longer supported. I'll be very surprised if none of the games do not really support that.

  What makes compatible Y510p may not be that difficult, BUT if Lenovo does not even 10 WIndows on Y510P (you know this right?) so why would they support new GPU Ultrabay. Is not my thought, that's what Lenovo did and I just let you know.

• Satellite L300D - power connector broken

  I got my wife a L300D about 4 months ago now, and it has been a good computer.
  Correct autonomy and the screen is big. That's all she needs.

  However, I run into a very big problem. All being 4 months since we got it, we'll have major issues with the power adapter.
  Because it's a straight plug, rather than a 90 degree, something happened where he broke the connector inside the computer laptop itself.

  Are there opportunities to find a replacement adapter that would have a 90 degree turn? Or well, because she uses it near the bed, in order to maintain the system plugged "differently"? I hope that we can this repaired under warranty (the power cord adapter itself also has frayed to move around, I suppose) - but if not, well--I have no idea how much it will cost.

  All thoughts, well, anything would be appreciated.

  Nick

  Hello!

  I agree with sanremo. The best way is to contact your local ASP and ask them for help. I think they will help you more than we do here.

  On the Toshiba site, you can search the nearest ASP:
  http://EU.computers.Toshiba-Europe.com-online decision-making supported Downloads & => Download drivers

  Good bye

• T420s that no power on AC power but Powermanagement said current alternative is connected?

  Hi, I hope someone can point me in the right direction with a problem I have with my Lenovo laptop.

  I have a T420s (Win 7 ultimate) which has stopped working. When it is connected to Acre the led battery on the cover started to blink and stayed on but the battery was not charging, first thought was the known issues with the power manager and the windows, but when I changed the settings in the power manager that it does not have load. When disconecting the battery of the laptop was dead, he would go only with the battery connected, but the strange thing is it said that AC was connected but the system will not work on AC only? I tried a second card (also 65w 20v) but that made no difference. Meanwhile, the battery ran totally empty. Leaving unplugged for a few hours and then connect it to an electrical outlet, it gets power for 2 seconds and then dies again. It looks like a hardware problem? Any suggestions? Thanks for any help!

  Alex

  Well after 2 weeks of vacation, leaving the T420s unplugged with the battery I plugged it and it started to load. When it has been completely reloaded I tried starting, did not start, button / stop flashes once and then died. Disconnected and removed the battery, not a discharge of static electricity (power button 10 times, then holdiing for 30 sec) battery, plugged in and it starts!

  It works fine now since yesterday.

  Cause?

  Thanks for the tips!

  Alex

• CPU dual core quad core replace on the radiator? Mini Tower Optiplex 755

  Hi, I am currently using a dual core 6850 and I think to buy a quad core. I have a 500W PSU as a spare.

  Can I replace the CPU on a Quad Core without changing the cooling system?

  heinflhs

  Here are the specifications of the replacement PSU part. Are they not better than the original power SUPPLY Dell block?

  This power supply is ATX and not EPS12V

  Better is not the issue.  Dell power supplys 80% efficient are not 70% ATX.  The - 5v rail is a question too although it may cause a fire from the motherboard or damage your system.  Its a dead giveaway that this is a power ensure between 1990 and 2000.

  This current is on track is not negligible. There is a single 12V RAIL on that unit and its maximum is 17A

  EPS 12V units have multiple @ 18 amps 12V rails each.  MAX Power on 12V rails is 264w not 204w

  This unit has much more on the 5V and 3.3V rails at the expense of the independent 12V rails and CPU 4 pin. So not this emergency equipment is not likely to work well or not at all.

  

  Recommended update or replacement is EVGA 750B 1

  

• 1131 power injector problems

  A stand-alone 1131 AP customer has some type of injector problem. What is the correct interpretation of this log message? What are my next steps?

  *Jan 24 17:23:48.056: %LINEPROTO-5-UPDOWN: Line protocol on Interface Dot11Radio1, changed state to down
  *Jan 24 17:23:48.056: %LINEPROTO-5-UPDOWN: Line protocol on Interface Dot11Radio0, changed state to down
  *Jan 24 17:23:52.096: %CDP_PD-2-POWER_LOW: All radios disabled - INJECTOR_CONFIGURED_ON_ANOTHER_PORT  (0021.56a6.7c01)
  *Jan 24 17:23:52.096:  -Verify the required power-injector is installed on the new port: ().
  *Jan 24 17:23:52.096:  -If a power-injector is installed, issue the command:"power inline negotiation injector installed"
  *Jan 24 17:23:55.120: CDP-ERROR: state:INJECTOR_CONFIGURED_ON_ANOTHER_PORT unexpected event:MANID_CHANGED
  

  BTW, the gs was right...

  1. Enter the command "inline injector installed power negotiating" and you will get a reply with the MAC address of the way of the switch connected to the AP.

  2. Enter the second command "negotiation inline power injector.