y510p usb terrible problems

Similar Questions

• After updating my iPhone 6 (9.3.4) the WiFi signal becomes very low! I did everything, but the problem does not stop! I don't a not update my other devices & their very good WiFi signals. Please help me solve this terrible problem...

  After updating my iPhone 6 (9.3.4) the WiFi signal becomes very low! I did everything, but the problem does not stop! I don't a not update my other devices & their very good WiFi signals. Please help me solve this terrible problem...

  Here's a tip for the user on the problems of Wi - Fi. Suggest from the top and bottom. Maybe one of them will help you.

  (1) restart you device.

  (2) resetting the network settings: settings > general > reset > reset network settings. Join the network again.

  (3) reboot router/Modem: unplug power for 2 minutes and reconnect. Update the Firmware on the router (support Web site of the manufacturer for a new FW check). Also try different bands (2.4 GHz and 5 GHz) and different bandwidths (recommended for 2.4 to 20 MHz bandwidth). Channels 1, 6 or 11 are recommended for 2.4 band.

  (4) change of Google DNS: settings > Wi - Fi > click the network, delete all the numbers under DNS and enter 8.8.8.8 or otherwise 8.8.4.4

  (5) disable the prioritization of device on the router if this feature is available. Also turn off all apps to VPN and retest the Wi - Fi.

  (6) determine if other wireless network devices work well (other iOS devices, Mac, PC).

  (7) try the device on another network, i.e., neighbors, the public coffee house, etc.

  (8) backup and restore the device using iTunes. Try to restore as New first and test it. If ok try to restore the backup (the backup may be corrupted).

  https://support.Apple.com/en-us/HT201252

  (9) go to the Apple store for the evaluation of the material. The Wi - Fi chip or the antenna could be faulty.

  Council: https://discussions.apple.com/docs/DOC-9892

• The conclusion for M - Audio MobilePre USB driver problem

  The conclusion for M - Audio MobilePre USB driver problem

  Use: iMac

  OS: El Capitan 1011.2

  The latest driver I could find was 1.8.1.

  Error message:

  Installation failed - Setup could not install the software because there was no

  available software

  I would use this hardware with Final Cut ProX 10.2.2 and Garageband 10.1.0.1

  A quick search seems to indicate the latest version of the driver to be 1.2.1 - there was no 1.8.1 I could find. It has been out for more than a year, so no mention of El Capitan, but it could work. I'll make sure that you have the right to download and try again.

• Lenovo y510p USB 3 port always disconnects smartphone

  I have a Lenovo y510p and have a very annoying problem with its 3 USB ports. Whenever I try to connect a smartphone (android) it it will detect at first but a few seconds after he just logs off and then logs it back again, it just a never ending cycle. So I can't copy files. The ports work well with other flash drives and even my external hard drive. It's just the smartphones that are affected. I used 3 smartphones already all the different models and they all exhibit the same behavior on the two usb ports 3. But smartphones worked very well when used with other computers.

  Just tried a new cable and found out that my cable was the culprit. Thanks for the help though.

• SD5010 DVD Player USB Toshiba problem

  Hello

  I recently bought this DVD player, when I play a movie through my USB always, it stops before the end of the film and cuts back to the main menu. Does anyone know why this might be happening? I tried resetting the DVD player and that didn't work. I deleted a few movies on the stick, and that did not work.

  What is the USB itself? It's a 16 GB.
  Thank you

  Theoretically, it could be a problem of USB if strongly recommend to test this using an another sticks too.

• Portege Z30-A-12N with Port Replicator Port Hi-Speed USB III problems

  Hi all

  I have a big problem with my new Portege Z30-A-12N and Hi-Speed Port Replicator III.

  I connected the power, DVI, LAN, mouse and keyboard to the Port Replicator.
  Power, DVI and LAN are okay, but none will be found if I connect something to the USB Ports 2.0 or 3.0.
  No mouse, no keyboard, and no USB key.

  When I start my Portege I must enter a password after you press the power button.
  These password, I could enter with the external keyboard, but in windows, no keyboard has been found.

  If I connect the keyboard and mouse to the USB Ports of the Portege instead of Port Replicator, the two has been found.

  I ran Windows 7 Enterprise on the Portege.
  BIOS version is 3.30

  Do you have a solution for me?

  Hello

  The HI-SPEED PORT REPLICATOR III PA5116E-1PRP supports 2 x USB 2.0 and 4 x USB 3.0 ports.
  You n t special need Win 7 drivers in order to be able to use the USB ports or other interfaces such as VGA, DVI, audio, etc.

  Sound problems, make sure that the audio device has been selected in the right panel-> sound-> playback tab

  By the way: Win 7 needs USB driver 3.0 which is preinstalled when the laptop was equipped with USB 3.0 ports. My knowledge if your mobile phone does not support USB 3.0, you will be able to use the port replicator USB 3.0 ports.

  Finally and above all devices must be connected before you start the computer. The decision supported and compatible specifications: Portégé R30 - A, Tecra Z40 - A, Tecra Z50 - A, Portégé Z30-A/Z30t-A, Tecra A50 - has

• Optical USB mouse problem with Portege R100 on windows XP

  We have three laptops Toshiba Portege R100 currently giving problems with mouse optical usb from Toshiba.

  When starting the laptop, that the mouse is not recognized by windows. Before and after will be identified in the mouse will not respond while Burns led.

  The mouse will be recognized after re - plug in the USB port.

  We have updated versions of bios to the latest version. (1.4)

  Another mouse (USB optical) works OK without problem.

  We have removed the drivers and reinstalled by windows plug-and-play process, but it does not work.

  Is this a known issue?

  Thanks in advance

  Hello
  would it be possible that the USB mouse has high power consumption?

  As far as I know, there are a load of maximum intensity for each USB Port.

  Do you know how much power (intensity) needs to this mouse?

  Good bye

• HP envy 20-d000: Usb security problem

  Guys, I have a problem with my bios here... I accidentally disable my usb security and then what happens is that I can not connect any usb even my keyboard drive... Need help is anyway to solve this problem... TQ

  Hi there @Prathash,

  That the Forums are with you!  I understand that you locked all USB connections in the BIOS and can is no longer even use your keyboard to restore.  I'm happy to give you a helping hand with this.

  In your current situation, you have only a few options, first to clear your BIOS default settings. To do this, you will need to use a jumper on the motherboard to reset the BIOS.  You can see the following for when the jumper is located on the motherboard for this system. HP and Compaq Desktop PCs - motherboard, Larrybird-B specificationsand Maintenance and Troubleshooting Guide, to get an idea of how to get to parts of your motherboard.  If you can't go to these riders, then your other option would be to contact an authorized service provider or HP directly to do this for you.

  Please let me know if it works for you and if it does not solve your problem, please mark this message as a solution. Bravo would be appreciated as well.

• Toshiba 48L1433DB - USB timeout problems

  My USB Ports do not appear on my list of Source and I have a problem of "dead time".

  If I put a stick in the media page loading USB ports and everything works perfectly, but then turns off after an hour or two (the on-screen message shows empty port lit).

  Then I have to unplug the stick and reload until I can start watching again (have to fast forward to place where disconnect happened but have to stop every now and then to avoid time re-product)

  Very curious

  Posted by [email protected]
  

  My USB Ports do not appear on my list of Source and I have a problem of "dead time".

  If I put a stick in the media page loading USB ports and everything works perfectly, but then turns off after an hour or two (the on-screen message shows empty port lit).

  Then I have to unplug the stick and reload until I can start watching again (have to fast forward to place where disconnect happened but have to stop every now and then to avoid time re-product)

  Very curious

  As a first step, you must make sure, that it is not caused by the type format and/or stick file.
  Have you checked with a stick from another provider? Also, does come with any type of file, or related to some formats?

• Satellite C660D - 10 p - USB connect problem Windows 7 64 bit

  Hello!

  USB drive is no longer recognized shortly after the start.

  According to 'Unsubscribe' or 'Edit user' still OK, but even for a short period.

  Have no USB Updat to Toshiba, a controller failure will probably be.

  Can anyone help?

  Harald greetings

  Hi Harald

  Can you please tell us what model of laptop do you have?
  Are you using the original version of OS that you got with your laptop?

  Maybe I didn't understand the description of your problem, but I imagine that the USB ports do not work on your laptop satellite? Right? have you tested with different USB devices?
  When you open Device Manager you will see some unknown devices here or some hardware issues?

• Equium A60: USB Hub problems

  I have an Equium A60 and that you just bought a USB 2.0 with 4 ports hub, but it is not recognized when plugged into one of the usb ports
  It causes also the PC hang on shutdown and startup
  Hass someone at - it had similar problems

  Hello

  As far as I know for some USB hubs, it is necessary to install a software that can help to use correctly. Some of them are plug and play devices and there is no need to install any additional software.

  I use Satellite 1900 and also have USB hub and it works correctly. In my case, it was necessary to install the driver before the hub is connected. A demon of the mine has Belkin hub and in his case, the driver has been installed after that the laptop has recognized a new hardware component.

  All this is based on the producer of hub. I hope you have some instructions how to connect the hub to the laptop on the right feel.

• USB keys - problem with the Recovery Manager

  I bought a 16GB Kingston DataTraveler 112 USB key so I could copy the recovery as a backup image. He acknowledged the USB key and showed that the recovery image has been slightly more than 11 GB. But when he started to format the USB key, it returns to the previous screen and asking more of the car. At the bottom of the screen, he said to contact the HP Support, but it gives me an error message. Now when I try the Recovery Manager it does not recognize the USB at all.

  Before that, I had bought another 16 GB USB - don't remember what brand. I have 5 other USB drives, but they are all small, except a 32 GB Kingston DT101 G2 which does not work on this computer, even if it worked on my old computer (Pavilion w/Vista Home Premium) without problem. All these USBs, including the new Kingston are for USB 2.0.

  Operating system is Windows 8.1 64-bit on the desktop HP Pavilion 500 - A60. I tried the problem that USB keys in all 4 ports (2.0 and 3.0). Also in that I plug into a port to give me 3 USB ports, also used on my previous computer.

  Is it possible that this computer does not recognize Kingston or some other brands of USB thumb drives?

  The trick to this is to use a USB 2.0 port and use a non-windows 8 certified thumbdrive. If the USB flash drive shows as a 'removable device' there should be no problem in the use of the media to create a recovery media

  I had a lot of success with a 16 GB Transcend USB 3.0 flash drive.

  I own a couple of DataTraveler flash drives and had the same lack of success, creation of recovery media that you did. I have had zero success with 3.0 of Sandisk Extreme usb flash drives

• Satellite L10-333 PSL10E - USB dongle problem

  HI members, I have a Toshiba satellite L10-333 MODEL No. PSL 10F now I bought a 02 usb wireless dongle.
  now my problem is that whenever I have start my laptop and connect to 02 to get online, the dongle starts to make a loud noise, which is constant and pushes me insane.and it breaks to the top of the internet connection.

  now, I was on the 02 forum, told me it might be the usb port is bad, or maybe I should try re - install the usb drivers, I can not find on the web site of Toshiba, seem to be an error with the results.

  I don't want to spend any more money for this laptop, as it s old for a few years and I have already replaced the screen
  at a cost of £150. can someone help me please.

  I don't have any other Internet, only the dongle... Thank you Paul.

  Jin

  > maybe I should try re - install the usb drivers, I can't find it on the web site of Toshiba, seem to be an error with the results.

  Download chipset utility of [page driver Toshiba | http://eu.computers.toshiba-europe.com/innovation/download_drivers_bios.jsp] and install it

• Bluetooth Windows 7 USB port problem

  Hello

  I use a bluetooth class 1 dongle (manufacturer unknown) with the V 8.00.03 Premium toshiba bluetooth stack and a bluetooth headset. The specifications for the dongle are: Bluetooth V1.2, compatible USB V1.2/2.0

  I have a strange problem when changing the USB dongle is plugged. If I change the dongle on another USB port, searching for devices fails. I tried to uninstall the battery and of course remove device from the bluetooth Manager window.

  Also, strangely, when I plug the dongle on a USB extension on the same port, it does not either. When I put the dongle into the same USB port it works fine as usual.

  I want to change the USB port so that I can get the best reception, like its plugged in to the back at the moment. Also, I want to use the usb expansion for the same reason, to bring out above the office. Oddly, if, as I say, it does not work with the extension (just a regular cable with USB male on one end and female on the other to plug the dongle in.)

  Is this something to do with voltage drop down a cable? And regarding the change of the ports usb is it something to do with ports being installed on this USB port bluetooth only? I don't know exactly how ports bluetooth works, how they settle etc.

  Thanks much for any help.

  Hello

  > Also, strangely, when I plug the dongle on a USB extension on the same port, it does not either. When I put the dongle into the same USB port it works fine as usual.

  I think you're wrong here buddy
  If you use another manufacturer's computer, and if you have problems using it, you should check the page of computer manufacturing support.

  In my opinion the question isn t linked to Toshiba BT stack but to the USB ports on your computer.

• Toshiba TG01 Mobile phone - USB Conecttion problems

  Hello

  I really need help with my TG01.
  I recently bought the 0ff TG01 from a friend, and before I bought it, it showed me that it all works perfectly.
  Now I can't by trying to connect to the pc by USB.

  The computer reads the sound to indicate that a device has been plugged and its starts to install the driver, and after about 30 seconds it not to say that the device has been disconnected. I tried to install it several times and I can't seem to understand what may be the problem.
  I tried all the available USB ports on my laptop but I just get the same problem.

  I have installed everything that is apparently must be installed, but the driver just dosent seem to want to know.

  IIR - could someone help me please it would be really appreciated

  Hello

  It is a Toshiba laptop forum and I doubt you'll meet someone who has some experience with a mobile TG01 here.

  However, I googled a little bit of a found some info.
  Try to turn off advanced network in the TG01 windows settings:

  Start-> settings-> connections-> USB - PC-> Advanced Network function.

  Good luck