Similar Questions

• Aspire switchable graphics issue E5 - 521G

  Hello

  I recently purchased Aspire E5 - 521G with AMD R5 graphic m240 which should have 1 GB of video memory dedicated. Atleast desciption of the computer said that, before I bought it. When I got the pc, I noticed that there is 2 GB of video memory dedicated. Ant thing is that it has not only r5, but r4 graphics also. Before I got this pc I got one with intel hd graphics 4400 with only 32 MB of video memory dedicated. And the thig is I played GTA IV on this medium computer with graphics settings. But I can't do it on this computer wit 2 GB video memory dedicated. So, what's the problem? The only thig that make me buy this pc was this dedicated r5 with 1 GB video memory graphics card. And when I ir I also has a kind of chart amd r4 card... And anyway. How is it possible that intel hd graphics card with 32 MB dedicated video memory has better gmaing the experience of this dedicated r5 with 1 GB video memory?

  Is it possible to fix this? I want to say I can not change anything in the bios, because there bios insydeh2o which is locked so theres no option in the bios. AMD Contror Panel has options just to "energy saving" and "maximum performace" and who is not useful at all. Is it possible to allow fixed graphics or somethig like that?

  Any help would be grateful.

  Best regards, Ausrius.

  It turns out that, graphic r5 works fine. Apparently intel graphics hd 4400 with intel core i5 was such a good experience for gta iv. And I expect more than r5. And there is always something wrong with gta iv. Despite all this I have max graphics settings for gta iv, monitor system amd sees it uses 60 to 80% of r5 and 80% of the precessor. But the thing is that I can play with these settings without any lag, if I keep the distance of less than 20% view. If I increase it to 50%, I'm starting to see the shift. And despite all this game always uses 80% of fraphics and over 80% of precessor. So that's it. No problem with graphics switchable. Oh, and it works very well also. I like the way things work.

• Card graphic Inspiron 3847 and compatibility PSU

  Hello everyone.

  I recently decided that I get a new graphics card. And the one I want (NVIDIA - GeForce GTX 970 4 GB GDDR5 PCI Express 3.0), requires a higher power than the stock of 300 Watt one. I don't know too much about compatibility standards, so I basically just want to get a 500 Watt POWER supply. All recommendations are appreciated. I need to know what I can get which is compatible with my PC.

  Here's the link to my PC, if you need it-

  I want graphics card (if compatible).

  If you can, please let me know if it is not compatible for some reason and recommendation possible something that is compatible with my PC.

  Unless you have warranty EXTENT invalidation Mods if this card WILL NOT physically go into the matter.

  Abbreviated from the 750 GTX TI versions work, but the 970 does not.

  8.20 "to 8,89" x 4.72 "x 1.50" inches is about max (depends on the power to the enter the end of the map or in the upper part), which is what was the Geforce 560 TI, which has been shoehorned.  She barely and was VERY tight.

  Corsair CS750M is recommended to upgrade power supply.

  02G - P3 - 1568 - EVGA GeForce GTX 560 Ti KR is the c.e.a map

  http://www.Newegg.com/product/product.aspx?item=N82E16814130683

  

• number of issues: free and paid articles?

  Is it possible to do folio issue multi and publish questions free and paid it? Thanks for the info!

  Yes, you can have free and retail issues in your Multi number App. For details, you need to have in-app purchases set up in iTunes connect as well.

• Issue wireless and slow graphic on Toshiba laptop

  It must connect to the Internet even I 30Mbit/s so fast connection and sometimes it is not even connect to the Internet from the worst wireless card that I've ever seen of the age.
  And can someone tell me what I have on the wireless settings when I test my speed it will not display the parameters: 356Mbits/s, he jumps, here is a picture where I mean what settings I have to correct this: [http://www.pikipimp.com/pp/pimped_photo/s/image/41/108/213/Sk_rmklipp4.JPG?ts=1233587970173]

  And the second 2 is the graphics card: oh my 6 year old laptop guy girfriends, and he acknowledges so fast when I click to watch videos online on the Internet, but with my NEW Toshiba laptop, I expect age to open video diffrient, here on example: [http://channelchooser.com]
  Why the graphics settings are so old so bad it sounds as if it was a joke, so slow when I play games The Graphic 3D - OMG - why?

  These 2 are not only the problem, but they are more important problem for me that's why I posted them, because there are more question, but it's only under Vista or XP as well?

  In your case I would update the graphics driver and WLAN.
  The two you can find on the Toshiba site:
  http://EU.computers.Toshiba-Europe.com > support & downloads > download drivers

  The image that you posted the question wireless is not available.
  However, I put t know how to access the internet, but it could also be a router issue. Try to update the firmware and check all of the WLAN settings on it and on your laptop.

  On the issue with online videos, I can say that you should try a different browser or plug-in (often you need Adobe Flash Player) is not working properly.
  Check and update software which are required for this.

• PS CS6 and Windows 8 graphics issues

  Hello!
  
  I have recently upgraded to Windows 7 Windows 8 Pro and I've noticed a few graphic problems in CS6. The flickering background, the image turns black, etc. After a little searching I found others who also had the issue. (Here and here). I also read the blog post by Jeffrey Tranberry recommending switching to the basic drawing Mode that solves the problem, however, by switching to the basic drawing Mode, who am I losing feature?
  
  When we look through the preferences of PS I also noticed something interesting. Look at this screenshot:

  
  
  
  Notice the VRAM? 209310 MO! This is a fast video card! Of course, this number is complete wrong and I wonder if it is related to the question above?
  
  Here are my PC Specs:
  
  CPU: AMD FX 4100 Quad Core 3.6 Ghz 64-bit
  OS: Windows 8 Pro (Release - Windows 7 upgrade version)
  RAM: 8 GB
  Graphics card: AMD Radeon HD 6670
  Video driver: catalyst 12.10 (compatible driver Windows 8)
  
  Is it a PS problem or a problem in the video card driver and Windows 8? I have not seen other errors in Windows with other programs. (Granted that other programs do not use the GPU as the PS done.)
  
  Please let me know if you need more information.
  

  Hi Linda,.

  Yes this is all related to driver problems with the fall of ATI 12.10 and impacts Psalm in opting for the basic mode, color management is managed on the CPU, and you may see an impact on performance with OpenGL rendering (3D on-screen interaction, I think requires the Normal parameter or advanced).

  Kind regards

  Steve

• NB100 and graphics issues in Vista and Windows 7

  Hi all.

  I have two NB100s and I wanted to upgrade to Windows 7. Everything went well until what the graphics driver has been loaded. Responses of the screen were as refresh once per second 5, then also the system froze for a few seconds - impossible to work on it. The case even on the two NB100s and even with the new drivers from Windows update. I'm curious to know what is the problem, because a lot of guys have written that they are running windows 7 and everyting is ok right after installation. I tried Windows Vista and the same situation has occurred. The only way I can use it with Windows 7 is to use the XP drivers. But then the aero glass does not. I just got idea if there is no problem with the new bios 1.6. It seems that other older guys NB100 and use Windows 7. Could someone help me? Has anyone tried Windows 7 with bios 1.6? THX.

  Hello!

  I think the problem is that you are using a beta version of the operating system and not a final version and these errors are normal because nobody can say that Windows 7 beta runs perfectly and without problems on all laptops or computers.

  However, see the Intel Web site for the latest drivers. Perhaps there is a newer version than on the Windows Update Web site.

  Good bye

• Equium A60: graphics issues and more

  Ive had so many probs with tis equium a60. It was overheating, stand by was not working and now the graffics were spoil! I rang this place recommended pcworld n they said try to format (large). anyway I restored it to factory settings while he was exactly as it was when I got it. stand is now working properly :) but it still is overheating (I mean really, it becomes it hot) and the graffics are always spoil.
  What happens is the screen freezes for a few seconds, then he goes the worst possible of display settings, so everything is massive and the colors are all wrong. and a pop up in windows as a encountered an error please reboot.
  This happens only at random times, I do not understand why ive formatted. I don't know if the card graffics itself is exhausted. any help or ideas appreciated. see you soon

  Hi Dave,.

  I think he should assume that your problems stem from overheating. It is very common for the dust and debris to form and block the passage of air through the CPU cooler. I suggest trying to remove such an accumulation or blowing into the heatsink (towards the cooling fans), or by sucking debris with a household vacuum. If all else fails, then you can remove the heat sink and the dust before replaceing it. Beware that this may invalidate your warranty.

  Normally a thermal trigger remove power if it detects the CPU heat too, but this does not mean that other problems cannot occur.

  If you still have problems with you appear after you have addressed the issue of overheating then please post again.

  HTH

• Graphic HPE430me upgrade and cooling issues

  Hello

  I have a HP Pavilion Elite 430me and you want to update the Geforce 440 card installed to a Radeon 6870.

  I have 4 questions

  1 it support of card mother MS-7613 (Iona-GL8E) PCIe 2.0 such as it does in the specifications page. It just says: PCIe 16 X? Keep in mind that this is a Board based H57.

  2 the case leave a space for the graphics card of 10 "?

  3 - 460W POWER supply is enough?

  4. I live in Egypt and temperatures here is warm enough during much of the year, and the case only comes with a single 80 mm fan; possible overheating here whereas a Core i7 870 is also present? Is it possible to install another fan on this case?

  Thank you

  AhmedHM wrote:

  Hello

  I have a HP Pavilion Elite 430me and you want to update the Geforce 440 card installed to a Radeon 6870.

  I have 4 questions

  1 it support of card mother MS-7613 (Iona-GL8E) PCIe 2.0 such as it does in the specifications page. It just says: PCIe 16 X? Keep in mind that this is a Board based H57.  PCIe 2.0 is backward compatible.  Therefore, it should work fine.

  2 the case leave a space for the graphics card of 10 "?  I don't think this card will fit.  I normally recommend staying less than 9 ".

  3 - 460W POWER supply is enough?  The Radeon HD 6870 requires a minimum of 500W.

  4. I live in Egypt and temperatures here is warm enough during much of the year, and the case only comes with a single 80 mm fan; possible overheating here whereas a Core i7 870 is also present? Is it possible to install another fan on this case?  AMD/ATI cards come with their Catalyst Control Center.  This software suite allows you to control the speed of the fan on the card.

  Thank you

  If your problem is solved, please click "accept as a Solution.

• AMD driver (HP G6-2003eq) HD7670M and switchable graphics issue

  I have HP G6-2003eq and I can't find this model in the support/drivers HP page.

  I want to install the official AMD drivers for the graphics card because the games I play are unable to identify and use the 7670 m.

  I am now running on the integrated gpu hd3000 and who does not. The graphics driver is not available on the official website of AMD either. Please respond to this request, I'm sure that I'm not the only one in this situation.

  I found the driver spicific on this page among the many models of laptops available

  http://h20180.www2.HP.com/apps/NAV?h_pagetype=s-002&h_lang=en&h_cc=us&h_product=5046256&h_client=S-A-R163-1&h_page=hpcom&lang=en&cc=us

  find a g6 model similar to mine, with switchable graphics

  page with download link

  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-104846-1&cc=us&DLC=en&LC=en&OS=4063&product=5270305&sw_lang=

  Cheers!

• T400 with switchable graphics and ATI graphic issue Windows 7

  Hi all

  I wonder if someone found work drivers to switch between integration and the ATI graphics we.  The problem I have is that I installed once the drivers for Windows 7 Beta and it worked well, except that I do not have screens on for brightness and press mute do not work (although the volume keys worked)

  Now, after you install an update for the ATI driver, I got the poster on the screen and the button mute to work, but I can't change the brightness when using the ATI graphics card. ATI has a beta version for the operating system win 7 on their site, but later, they can do they recommend to go to the site of the manufacturer of the laptop.

  On the site, I downloaded all the possible drivers without success (and once I got a blank screen after loading windows... I had to boot into safe mode and remove all the ATI drivers for the view at the beginning upward) so I use now on the integrated graphics card and it works fine but if I switch to the ATI I run the risk of not being able to change the brightness but also not being able to return to the integrated graphics card (he told me to close all 3d applications and video before moving on when it there) was nothing to open)

  Everyone knows a problem similar to mine? I ran out of options on the lenovo site, so I don't know what to do now. New drivers any time soon?

  Best,

  Max

  Fixed a problem!

  The BIOS update was necessary. Now I got it all work! I was wondering if it might affect when I saw earlier. I got it. Thanks for all the help.

  Now, I'm trying to solve the problem of Win 7 explorer.exe suspended due to a 3.9 GB tif file...

  Thanks to you all.

  Best,

  Max

• -Portege Z10t 13 V graphic driver problems and lag with W10

  Hello

  Please excuse my bad English,

  I just bought the Z10t A 13V PT 141, with W8.1. This computer works fine on W8, but I want to install W10. I already tried 3 times but each time, the cursor (with the touch pad or mouse) is lagging behind, each movement is jerky and works very well. I tried to see if it was a driver problem and downloaded new drivers from Toshiba for the W10.

  I did the same thing with Intel drivers, but for graphics drivers, there is an error message: "a custom computer manufacturer driver is installed on your computer. The Intel driver update utiliy is not able to update the driver. Install a generic Intel driver instead of the driver from the computer manufacturer custom can cause technical problems. Contact your computer manufacturer for the latest driver for your computer.

  When I'm with W8, drivers are correctly updated...

  So I think that the cursor problem is due to this driver problem (I hope so, but I'm not sure). What is the solution? I'M alone with this problem?

  Thank you

  Thomas

  Hello Thomas,.

  EXACTLY the same problem here with my uograded Portege Z10t-A-140 to WIN 10.
  I also took the same steps and encountered the same problems and no solution.
  I find Toshiba after sale customer VERY INEFFECTIVE and disappointing, because it seems no way to get a support PROFESSIONAL from Toshiba on this issue (or any other for that matter).
  Note that I absolutely do not consider helping other users on a forum or self-help a form of professional support at all!
  -> Not happy with Toshiba!

• Satellite A660 - 11 m: graphics issue - a few squares on the screen

  Hello

  I have a problem with the graphics - when the screen of Windows 7 (64 Home edition) start something wrong with.
  I see a few places, for screen occasionally goes black (for 1 second) and after that, there is a nvidia driver on communication.

  When I disable the driver in safe mode and restart my computer laptop everything ok (but without graphics driver.). I got computer default Configuration (after that - even :().

  Can you help me? or suggest in this problem now I have to do?

  Kind regards
  ravsaint

  Hello

  You can try to install or update the graphics driver.
  It would be useful that the issue would be linked to the defective display driver.
  But it's more because of the graphics chip.
  In this case the update of the driver will not help you, but only one replacement of the mother figure/card chip. :(

• R400/T400/T500/W500: Switchable graphics issues with Win 7

  Based on the experiences of the wire on switchable Vista graphics driver issues, I here starts a new switchable graphics related to Windows 7 (any SKU) records. Please keep the Center wire and clean up your language. IE: problems related to the XP or Vista are not the subject here.

  I made the switch to Win 7 64 and so far, it is an improvement in the "switchable graphics" - zone. But I have seen some issues:

  • Energy consumption is much higher than under Vista 32. It seems related to a problem in the management of the switching power of graphics adapters: see the thread by roteiro.
  • On my external display of Dell, I sometimes watch "pixel noise". In certain areas of the screen pixels flickering in different colors.
  • Could be related: hang after the release of the standby mode
  
  

• HP NC8430: Graphics issue

  Hi all

  Old nc8430 running Win7 suddenly my daughter started acting weird and the display of the lines of color and distorted pixels:

  

  I plugged a monitor external and here is the result:

  

  The graphics card is dead? I think it is shipped the motherboard so replace is not an option. (The cost would be the same as the purchase of a new laptop). Is there something I could do to try to fix?

  Thank you for your time.

  Here is some information that you may find useful.

  Troubleshooting LCD screen issues

  If you found my answer helpful please say thank you by clicking the s cursor Up icon. Thank you!