Y580 you are not currently using a screen attached to a nvidia gpu

Similar Questions

• HP Pavilion 15-ak011na: you are not currently using a screen attached to a nvidia gpu

  I had the laptop for a week.

  HDMI port stopped working last night.

  I tried to run the nvidia Control Panel today and received the following message:

  "you are not using a screen attached to a nvidia gpu"

  I need a second monitor to work effectively.

  Is that what the problem of ideas?

  See you soon,.

  Sean,

  Edit: I've updated the BIOS and it is fixed.  God knows why.  I hope that's all and it will continue to work.

  The updgrade BIOS seems to solve the problem of monitor because he is still working today.

  He is allowed to make a BIOS upgarde is a new PC, but in general, manufacturers of motherboards do not recommend updated the BIOS unless it's giving questions.  Strange that the previous BIOS could cause such a problem...

  If all goes well, he continues to work!

• You are not currently connected to the Oracle BI server

  Hi I am facing problem while that connection in the page of answers... Here is the message I get... Please someone help, what could be the matter, thank you

  	You are not currently connected to the Oracle BI server. If you have already logged in, your login may have expired, or a communication or a server error occurred. To reconnect, click here. If the problem persists, please contact the site administrator. »

  Hi Ram,

  My question was resolved, it happened because of OPMN services are low.

• XPS 8900 - you do not use a screen connected to a Nvidia GPU

  Just got my 8900 XPSA. If I try to access the Nvidia Control Panel, I get a message that I do not use a screen connected to a Nvidia GPU. I have a Nvidia GTX 745, which was last updated 25/08/16 pilots. It shows that it works in the Device Manager.

  

  What's your graphics card connected to the graphics card integrated on the motherboard? or the discreet graphics card.

• You are not currently connected to any networks

  I have an acer aspire 5552 with windows 7. I have upgraded to windows 10 but because I could not fully access to my LAN, I went back to windows 7. Now windows 7 says I'm not connected to any network, while the cards are there and their settings can be changed. No network appear in the network and sharing Center. The status of the local network adapter and the wireless adapter is not connected, IPv4 and IPv6 not connected. I reloaded the drivers for 2 adapters but no change. I really want to go back to the factory State.

  Can someone help me?

  Thank you revomaxx.

  the solution proved to be the associated firewall. I use comodo firewall. When I unchecked the comodo selection in the network card settings, everything worked all of a sudden. I then reinstalled comodo and all was fixed.

• can not install the latest version of itunes, get the error msg: "the component you are trying to use is on a network unavailable resource."

  Can not install the latest version of iTunes.  Everytime I try I get this error msg: "the component you are trying to use is on a network resource that is unavailable."

  Then I click OK and get this msg: could not find the path C:\users\my name\appdata\local\apple\apple software update\itunes6464.msi.

  I need to sync my new iPad pro and because used to synchronize requires the latest update, I have my laptop but I never have syncd my ipad with this computer and if I try to backup if I agree to erase everything on my device and sync with the laptop.  Of course, I don't want to do what I want to see everything on the NEW ipad from the old version.

  I went through the troubleshooting and found a solution, but when I had finished making all this trouble report said, there was a pesky itunes shortcut file on the left and I can not delete this shortcut, regardless of how many times I try.  If I can't remove it, the Installation will be terminated.  How can I delete this file?

  For general advice, see troubleshooting problems with iTunes for Windows updates. Start by Missing MSI errors .

  The steps described in the second case are a guide to remove everything related to iTunes and then rebuild what is often a good starting point, unless the symptoms indicate a more specific approach.

  Review the other boxes and other support documents list to the bottom of the page, in case one of them applies.

  More information area has direct links with the current and recent buildings if you have problems to download, must revert to an older version or want to try the version of iTunes for Windows (64-bit-for old video cards) as a workaround for problems with installation or operation, or compatibility with QuickTime software or a third party.

  Backups of your library and device should be affected by these measures but there are links to backup and recovery advice there.

  TT2

• Cannot install Silverlight error: the component that you are trying to use is on a CD-ROM or another removable disk that is not available.

  Original title: Cannot install siverlight wants cdrom

  When I try to install from a download of Microsoft Silverlight, I come me next survey on my screen:

  The feature you are trying to use is on a CD-ROM or another removable disk that is not available.

  Insert the disc of "Microsoft Silverlight" and click OK

  Use source:
  Installation of Microsoft Silverlight 1

  I killed the associated files of SilverLight with REGEDIT.  In Add or remove programs to audit, it has returned.

  Please help as I can't watch videos COMCAST without installed.

  Frank K.

  Hello

  I suggest you go to the link below and post your question in the Silverlight forums for help on this issue.

  http://forums.Silverlight.NET/

  Hope this information is useful.

• "The feature you are trying to use is on a CD-ROM or another removable disk that is not available. Insert the disc "TrayApp".

  OT: TrayApp disk?
  I get a message after my computer starts "the component you are trying to use is on a CD-ROM or another removable disk that is not available. Insert the 'TrayApp' disk then I have another box that says please wait while the window configures TraApp. They're going away the screen, I'm sure it's something on my beginning of preety menu up which should be removed, but don't know what it is. Please can someone help?

  Hi sandirose,

  1. using HP printer?
  2. don't you make changes to the computer before the issue occur?

  TrayApp disk is a HP printing software, I suggest you perform clean boot and remove the program that is causing the problem.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
  http://support.Microsoft.com/kb/929135

  Note: follow step 7 of section of boot KB929135 to the computer in normal mode.

• should I turn the printer off when you are not using it?

  you just buy new printer - HP envy 5530 - need to know if I need put it off when you are not using it or if it passes in mode "sleep"?  other printers I had went to sleep mode however cannot locate this answer in the FAQ - like entry - thanks ~ ) husband

  Welcome to the mgchandler forums,

  I saw your post on want to know if you should be powered down the printer or if it won't fall in the mode 'sleep'. My best advice would be to turn off the printer by the power button if it will not be used for a period of time, for example during the night. Regards the mode "standby", the printer goes into standby after 5, 10 or 15 minutes of inactivity.

  • To change the settings for sleep mode, go to the front screen of the printer and press settings (wrench)
  • Contact preferences
  • Press the arrow down and on Standby Mode when you see
  • You can now change the time of mode 5 to 10 to 15 minutes before

  User - Guide Page 93 + 94 for Info Sleep Mode

  I hope I helped answer your question!

  Have a great Tuesday

• Why JDeveloper runs applications that I use are not currently

  Why JDeveloper runs applications that I use are not currently? Whenever I select run > start an Instance Server (Integrated Weblogic Server) standard output for Weblogic indicates that it is trying to load the webapps I use are not currently. Here is the error message weblogic.application.ModuleException: could not load the webapp: "MyJSFApplication-projectName-context-root". This happens just by starting the Weblogic server - I do not say to load MyJSFApplication-projectName-context-root.
  
  Could you please tell me
  (1) why this is happening?
  (2) how to run Weblogic server integrated execution so that it loads only?

  Those who may be some applications you have running in the past and were not properly deleted server.
  Here's a way to remove them:
  http://blogs.Oracle.com/Shay/2009/08/removing_applications_from_you.html

• The feature you are trying to use is on a network that is not available. Click OK to try again or enter a different path to the folder that contains the installation packagr 'TrayApp.msi'

  Original title: trayapp

  When I open the computer message appears, the component you are trying to use is on a network that is not available. Click OK to try again or enter a different path to the folder that contains the installation packagr 'TrayApp.msi' in the box below.
  C:\Users\user\AppData\Local\Temp\7zS5216\setup\TrayApp\
  When I click ok the message this way that c:\users\user\appdata\local\temp\7zs5216\setup\trayapp\ is not found. Verfy that you have access to this location and try again or try to find the 'TrayApp.msi' in installing a package file from which you can install the product'TrayApp.
  When I try to cancel the warning message, is that an installation package for the TrayApp product is not found. Again the installation again using a valid copy of the 'TrayApp of installation' package. I already uninstalled all HP products, but this message is still bothering me, how to solve this problem?

  Hey Tama,

  
  -What version of windows is installed on the computer?
  -Have there been recent changes to the computer before the show?
  I recommend you go through the next HP document and check if it helps.
  http://h10025.www1.HP.com/ewfrf/wc/document?LC=en&DLC=en&cc=us&DocName=c00811375
  Hope this information is useful.

• Desktop\SharedDocs is not accessible. You are not allowed to use this network resource. Not enough server storage is available to process this command.

  \\XXXDesktop\SharedDocs is not accessible. You are not allowed to use this network resource. Contact the administrator of this server to find out if you have the permission to access. Not enough server storage is available to process this command.
  I got the above message when I tried to access my room servert pc (XP Pro with Service Pack 3) from another pc Client (XP Home Edition with service pack 3) on a network share. I see all class document & readers who share in my network places on both PCs.
  There is no problem when I have access to XP Home Edition of XP Pro. I heard the pc installed with Acronis True Image to give to this question. But my two PCs are installed with it. Any solution.
  What I've tried so far on my pc (XP Pro):
  1. click on start, run, type regedit, and then click OK.
  2. Locate and double-click the following registry subkey:
  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Lsa
  3. on the right side, double-click restrictanonymous setting.
  4. make sure that that the value in the value data box is set to 0, and then click OK_ (why the default value is 0. I change it to 1, but always the same)
  5. close the registry editor.
  6. restart the computer.
  I also tried to enable the allow anonymous enumeration of SAM accounts and shares on XP Pro (default value is Disable).
  File and printer sharing exception is enabled in firewall. Don't have a firewall part 3

  The two guest account are capable of Simple file sharing in XP Pro box checked also checked.

  Hello

  Please visit the following link.

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_xp-networking/three-computers-networked-fine-then-suddenly-the/3976b554-bb9c-4920-881f-38eb64480ca7

• TrayApps Message - the component you are trying to use is on a CD-ROM or another removable disk that is not available. Insert the TrayApp disk and click on 'ok '.

  Original title: TrayApps Message

  I get a message, "TrayApp" - the component you are trying to use is on a CD-ROM or another removable disk that is not available.  Insert the TrayApp disk and click on 'ok '.

  Hi BobKern,

  Follow the steps listed in the article mentioned below to solve the problem:

  Resolving MSI startup errors

• Please wait while Windows configures FAX"... this process stops and I get another message that says:"the component you are trying to use is on a CD-ROM or another removable disk that is not available. "

  Original title: widows installation problem

  I have Windows XP Professional running on a desktop older.  I cleaned the disk and I would use it only as a 'internet '.  It works well and response times are pretty fast, but when I connect I get a box that says "Please wait while Windows configures FAX"... this process stops and I get another message that says "the component you are trying to use is on a CD-ROM or another removable disk that is not available", "put the 'FAX' disk and click OK. , "" Use Source: '1' "»

  The first question is I do not use a fax application and never did, I have tried every disk I can think of to complete the process, but I get the same message with each one 'the path '1' is not found. "Make sure you have access to this place and try gain or find the installation 'FAX, MSI' package in a folder from which you can install the FAX product." .. then "error 1706 - FAX." Valid any source not found for the FAX product.  Windows Installer cannot continue. »

  This will take place two or three times at the beginning upward.  How can I prevent Windows Setup tries to install something that I do not use or do not seem to have?  I deleted any fax program, that I could find on the computer, and nothing seems to work.

  Hello

  1. have you done any change in software on the computer lately?
  2. are you able to install other applications and programs successfully?

  Check to see if the problem exists in Safe Mode, if the computer works as expected in mode without failure, then we can solve the problem in the clean boot state. There is an application which is set to start when you start the computer and which launches the installer of Windows.
  a. refer to the article below for the procedure safe mode in Windows XP
  A description of the options to start in Windows XP Mode
  http://support.Microsoft.com/kb/315222

  b. you need to perform a clean boot to find the program that is causing and then disable or remove.
  How to configure Windows XP to start in a "clean boot" State
  http://support.Microsoft.com/kb/310353/en-us
  Note: When you are finished troubleshooting, follow the steps as explained in the article to reset the computer to start as usual.

  I hope this helps.

  Thank you, and in what concerns:
  Shekhar S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.
  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Either the file does not exist, you are not allowed, or is the file may be in use.

  I'll do that as a separate issue because I think that, ultimately, it is this error that is causing me so many problems in InDesign.

  Scenario...

  New Document > drag a CC library item into the document > save the document and close InDesign > open the document, the error message...

  "This document contains < number > links to sources that are missing.  You can find or reedit the missing links using the links Panel. »

  When you attempt to link the missing links again...

  "The file does not exist, you are not allowed, or is the file may be in use."

  When you remove the link to the document and try to reinsert it draws CC...

  "The file does not exist, you are not allowed, or is the file may be in use."

  All this becomes a major problem when trying to output the document in PDF format, which is asking our printer.  The binding elements are given white background and they are of poor quality, too.

  Is this a known bug?  I see a lot of messages about it, which goes back to 2012!, but no solutions to this day.

  I hope someone can help.  Thank you.

  NJ

  > I'll try things that you suggest, but what is most concerning is that this library works with new documents - library items don't report any error.  So why he pointed out problems in a single document display paths and which are all correct?

  The problem could be in the InDesign document, in that you move the data from the library?

  Try saving this file as a file IDML (to clean possible corruption), and then reopen it in a new document and try again.