Yet WT8 battery always shows 100%

Similar Questions

• 10 IOS on iPhone 6 battery always shows 100%

  Hi everyone, I have updated my Iphone 6 (sprint) in iOS10 and since then my percentage of dough is always 100%. The phone dies, I'll do it, he will return to 100% and then shows never any number below in addition to 100 until he died. This happened exactly when I updated to iOS10 and the battery life / percentage was fine before. Any ideas or advice? Others have this problem?

  Force a reboot of your device in now the home and power buttons until the Apple logo appears.

• Lenovo Y 410 - battery doesnot - shows 100%, but dies when disconnected

  Hello

  I have a Lenovo Y410 model, purchased in Nov 2007.It was my mobile favorite and best I've ever used.

  Only since the last morning, suddenly, the battery doesn't work.

  On power options the battery meter shows 100%, but when I unplug the power supply, the laptop dies instantly stops offshore.

  So, click Properties, it shows the battery details and said sound plugged in as well.

  I read some of the sons like resetting the battery indicator / voltage etc. control / battery replacement?

  Someone help me please...

  MARK_LENOVO has help everyone. If you're still here could you please help me.

  This problem happened to my other laptop (t41p) as well. So your help is very appreciated.

  Thank you much in advance.

  See you soon

  Dheeraj.

  battery flat, buy a new one.

• HP Compaq Presario CQ61 - battery - new battery (icon shows 100% available, connected load)

  I replaced my laptop battery and the icon shows now available at 100% but connected load.

  Remove the cable from the laptop dies immediately.

  Have I done anything measured during the installation of the battery?

  Can you please check if your AC/adapter works normal by connecting to a different laptop

  OR

  Can you connect please an adapter of well-known power supply/AC of a different notebook with your laptop to check

  So we can troubleshoot

  Note: In case if you are unable to perform any of the actions mentioned above I highly recommend to immediately Contact HP Support by phone to get help without delay to get your Notebook diagnosed and repaired by an authorized HP Certified Engineer

  You can also check your warranty here to check the status of the guarantee

  Hope this helps, for other queries in response to the post and feel free to join us again

  * Click on the star of CONGRATULATIONS on the left to say thank you *.

  Make it easier for others to find solutions by checking a response "Accept as Solution" if it solves your problem.

  Thank you

  K N R K

  I work on behalf of HP

• Lenovo Y 40 - battery doesnot - shows 100%, but dies when disconnected

  Hi all

  It seems that a lot of people have this problem as I browse this forum.

  My Lenovo y40 is less than one year, so still on warranty. Recently (May 19) started having battery problems. It displays 100% charged, when it is plugged. But as soon as I unplug the charger, the battery empties quickly or turns off immediately.

  Other times, the battery is to remain in office and will stay on for a few hours. It is very intermittent, it seems that the laptop has trouble reading the current battery level.

  I have tried everything recommended on this forum, resettled pilots, reset the gauge from the battery through the Manager energy. What gives? The laptop is too new to have a defective battery and it was working perfectly until a few days ago.

  Anyone else having this problem, I really need to use the warranty already? Argh...

  
  

• Percentage of battery always 100%

  Hello

  I currently have a HP Pavilion dv6-7007TX Entertainment Notebook PC running Windows 7 64 bit. My problem is that the battery percentage shown on the right side of the taskbar always shows 100%. It will not decrease much matter how long I am on the laptop. A few days before, while I switch on the laptop before Windows 7 starts to load, there was a message that had something to do with the battery, but I don't remember what was the message (only that it has something to do with the battery).

  This causes a real problem for me because I don't know when I charge the laptop.

  Any help will be greatly appreciated.

  You are welcome AlanWTL.  I hope I've been helpful!

  This error message appears every time that you start the laptop? Had you noticed other problems of life battery leading up to this point?

  I felt initially that it was a problem of calibration. This means that the battery has forgotten where exactly were his points 0% and 100%. It is the usual cause for proper display of the remaining time/battery issues. Even if the battery test passed I would still exclude the possibility that the cause. I will propose to perform two steps in one: a hard reset and manual battery calibration. Follow these steps and let me know the result.

  Hard Reset and manual Calibration

  1. Shut down your laptop.
  2. Remove the battery and AC power.
  3. Hold the power button for 10-15 seconds, remove residual power.
  4. Replace the battery/AC Power and re - turn on the laptop.
  5. After the hard reset connect the laptop to the top and let it charge for several hours.
  6. After load disconnect AC power and run check hard drive HP in HP Support Assistant until the powers of the laptop itself off the coast. Make sure to prevent sleep during this period.
  7. After the battery is fully emptied free of charge the laptop again.
  8. Run the test of the battery once more to make sure that there is no change and determine if Windows now reports the correct amount of the battery life.

• Kodak camera - Win 7 always shows the battery in 10%

  A few weeks ago, I bought a camera Kodak Z990. I noticed some weird behaviors with the 'Z990 Digital Camera' windows that open when I connect the camera to my laptop to Windows 7 via USB.

  • The taskbar displays two instances of the Z990 digital camera window - icon pop up for one is a peak of the camera, the other is a thumbnail of the current window. By selecting either to start from the taskbar displays the same window, and close the window causes the two tiles of the closing taskbar.
  • By clicking on the link to import the photos and the video is ineffective. It is necessary to double-click on the link. The interface would lead me to believe that a single click should work.
  • The most important for me - the descriptive text at the top of the window ALWAYS shows the status of 10% battery, regardless of the actual condition of the battery.

  I've already updated the camera the latest firmware available.

  Is there something that can be done on the side Windows of the things to address these questions, or all them are the result of driver from Kodak, and a solution can only come from Kodak?

  Thank you

  Steve

  In my opinion, you should contact Kodak regarding this issue.

• battery for HP dv4 series 1% showing 100% load

  HII.dv4series 2113tu laptop.last night it keeps 2 hrs backup.bt day after tomorrow he's in charge 1% showing 100%.when I remove the charger it stops s.Means completely depend on plugin... WHT 2 yaar. The lappy was purchased 1 year earlier. Warranty was comlpeted on August 12, 2011

  You might want to understand the battery works through the following document:

  http://support.HP.com/us-en/document/c00596784

  Also, you can run a health check of the battery using the HP support Assistant. In case you don't have the latest version of the HPSA, you can go through this document to learn more about this tool and install it. The battery health check will inform the exact status of the battery.

  http://support.HP.com/us-en/document/c00821429

• automatically optimize for costs of life battery batt to 100% within the parameters of the power manager

  In the settings of my ThinkPad Power Manager W530, I chose the option "automatically optimize for life battery" (battery-> maintenance-> Mode of Charge of the battery). Nevertheless, he always fresh and keeps the battery at 100%. Is it normal for a battery 9 cells?

  Link to photo

  But many articles and discussions here at the forum State, actually in charge at 100% is not tor good battery life (see for example this article http://forums.lenovo.com/t5/Welcome-FAQs-Knowledge-Base/How-can-I-increase-battery-life-ThinkPad/ta-... ). Do not miss anything?

  Thank you!

  Note of the moderator; image (s) for a total of > 50 K converted for the programming of the Forum rules

  No matter how many charge cycles the battery on it, just the time where you change the batteries maintenance mode. If you have configured to maximize battery life, the battery may charge at a lower percentage (somewhere around 90%, more or less a few percentage points), but will show this figure as "integral" or 100% for the system. If you change the mode to load completely, then the maximum capacity will change to read the actual capacity of the battery.

  The only way your situation would be a concern if, after setting the battery in order to maximize the battery life, then using the system on battery and load up once again, the battery always charged up to the full 94 w/h instead of reducing the number.

• Iconia w4 820 battery stuck on 100%

  Hello world

  I bought a windows Tablet and my iconia battery indicator stucks on 100% (when), and when the battery run out, the screen (and to all of the Tablet) just off, like if I get out the power cable from the PC.

  Please help me

  There is a utility called BatteryInfoView that might help diagnose the problem. Give it a try and see if it shows the real situation of the battery. If it also always displays 100% then you probably have a hardware problem and need to contact Acer support. Let us know how it comes out.

• Yet WT8-B-102 discharge while being closed

  Hello

  My Toshiba still WT8-B-102 performs 100% to 5% and less then 10 hours after being arrested (not the sleep or Hibernate). I use Windows 10. I can't tell what it looked like on windows 8.1 because after buying the Tablet I've updated to W10. I even did W10 clean install (with drivers from the toshiba site). During normal operation my battery lasts about 6 to 8 hours, so I guess there is nothing wrong with the battery itself.

  You have ideas, what is the problem? Some perhaps of settings in Windows?

  "USB Sleep and Charge" and Wake on LAN/keyboard drain the battery when the unit is off. Disable these settings in the BIOS.

• On Google, Ffox 3.6.12 shows only 10 results even when I specify 100; Mac G4 10.4.11. other browsers show 100 without problem.

  On my Mac G4 two-way to 1.25 GHz Power PC with OS X 10.4.11 and Firefox 3.6.12, when I opened Google and specify 100 results like this...

  http://www.Google.com/advanced_search?hl=en & num = 100

  .. .it always shows just 10 results. While Opera and Safari (I don't use Internet Extorter) show 100 results no problem to use this URL.

  Problem was occurring at least since Firefox 3.6.9 if I remember correctly. Not sure if it was going on before that.

  Google has recently made a few changes on the site to Google search with the addition of instant search and who made the adjustment of the number of results in the settings of Google to stop working.

  If Instant Search is enabled in the settings of Google search page (link at the top right) then you get only 10 results.
  
  You must disable Instant Search and reload the result page, and then set the number of results to your preferred choice.
  
  It may not work if you change both at the same time.

  There is a link directly to the right of the Google search box on the Google results page.

  It's a button with a drop-down list: moment is On / Off.

  There is also a radio check box in the page settings of Google, which has replaced the previously used Suggestions.

  • http://www.Google.com/preferences?hl=en

• MacBook pro 13-inch el capitan always show the Rainbow of dead ball

  Right now I'm using Macbook Air 13 inch mid 2012

  I have once again updated my iphone 4 ios s 8.0.2 to 9.1.2 using my mac and I left the mac update this throughout the night

  But tomorrow after I tried to run my mac, it turns very slow and I finally discovered that my mac always show the Rainbow ball dead once that he "freeze" or "hangs." I have a problem when I run any application, try to press one of the sound, light, stop buttons in the row or even write something about the spotlight

  I tried several thing to get my mac

  (1.) I tried to stop the do not respond forcefully quit

  2.) open the activity monitor and try to leave the app consuming so much memory or running % CPU

  3.) doing repair disk

  4.) close with force the mac by pressing the power button

  5.) try to restart using the command + alt + shift + power button / stop or command + R + power button front for my mac to turn on (and another way to turn on the mac I don't remember really

  6.) download the application "CleanMyMac3" and clear about 100 GB of data

  7.) I also check my hard drive internal and I know I have still 250 gb of my memory of free space

  Anyone has idea what should I do to make my normal Mac turn? I need quick answer as soon as possible

  First, you must uninstall CleanMyMac.  This program is bad, bad news.  It's the fraudulent crapware, I can be honest.  You should never, never, never download any program 3rd party to remove anything from your computer, sight unseen.  You do not know which files were contained in this 100 GB, and that's what makes it dangerous.  Your computer has been damaged, well beyond what was he runs everything until you did.  Mac do not need software 'maintenance' that claims to clean, organize, update or optimize it.  They do a great job of taking care of themselves, to the extent where that goes.  So, until the problems you encounter may be addressed, you need to uninstall completely in accordance with the instructions of the developer.  You can find them here.  Do exactly what these directions say to do.  If you do not, you will need to reinstall to uninstall correctly.

  Once you take care of it, go to http://www.etresoft.com/etrecheck , download and run EtreCheck, copy paste here the status report.

• I deleted the majority of my photos from my phone but when I connect it to iTunes it always shows in the bar memory

  I deleted the majority of my photos from my phone, but when I connect it to iTunes it always shows in the bar of memory and it shows that I have no memory left

  You've synced the iPhone yet? It refreshes the data in iTunes.

  Furthermore, if you have configured to load music you deleted or the same photos of iTunes, iTunes will put this information on the iPhone when you synchronize.

  Try pressing sync and see if it changes at all.

• When unplugged, battery still reads 100 percent, dies a few minutes

  Whenever my Y40 is unplugged, the computer shows the battery to 100% and never decreases. A few minutes later, the computer will turn off and will start. When I plug back in and turn it on, it shows the battery is very low and load normally, then shortly after showing 100% fully charged (it isn't). I tried the system restore and the following, which I saw posted in several places:

  "First of all, shut down the laptop, unplug the power adapter, remove the battery and then hold the Power button for 30 seconds.
  Now plug the power adapter without the battery inserted, start Notepad, open windows control panel, open Device Manager, expand the entry for batteries, click right on and the Microsoft ACPI compatible with battery control method and select uninstall - do not uninstall anything else here. When the uninstall is complete, shut down the laptop, unplug the AC adapter, reinsert the battery and then start the laptop's battery. Windows will automatically reinstall the driver - leave Windows running for a few minutes and see if the battery level decreases as it should. »

  I don't know where to go from here. I bought the computer last year and suddenly started questions recently. I recently installed Start Is Back, but the Advanced System Restore does not resolve the issue. I am running Windows 8.1 and everything seems to be up to date. Any advice?

  In response to customer relationships of unexpected behavior portable Y40 - 70 and Y40-80 meter battery, Lenovo has determined that the battery meter software is working as expected. The unusual calibre results being reported are the reflection of the battery reaches the end of life.

  Lenovo has launched a CUTTING-EDGE Service to help customers get the battery replacement under warranty, or if more warranty, find a spare from suppliers approved by Lenovo battery. The Service TIP can be found here: https://support.lenovo.com/us/en/solutions/sf16-I0023

  The numbers for Y40-70/80 batteries are:

  Y40 SP / A L13M4P01 7.4V48Wh 4cell IBE (Y40-70/Y40-80) 121500248

  Y40 LG L13L4P01 7.4V48Wh IBE 4cell (Y40-70/Y40-80) 121500249 replace the 121500251 part

  Y40 CP/C L13C4P01 7.4V48Wh IBE 4cell (Y40-70/Y40-80) 121500259 replaced by 121500251 of the part

  To determine what battery supplied with your computer laptop Y40, instructions to remove the lower cover can be found in the manual of Maintenance of equipment pdf here. An alternative to opening your system (which do not cancel warranty) is to find batteries using the product/model number located on the bottom cover.

  Thank you