Yoga 13 screen - Bios side black

Similar Questions

• My apple tv has been full screen but suddenly black bars apears on the side, how can I get full screen again?

  My apple tv has been full screen but suddenly black bars apears on the side, how can I get full screen again?

  Post a picture of your screen and the model number and brand of your TV.  Sounds like a TV problem.

• Screen of 7140 black place Pro 11 where put on

  All,

  I have a coming 11 Pro 7140 8Gb / 256GB and am facing a problem where the machine not turn on the screen.

  The power failed when the machine was asleep/idle (click on the button side, wide screen). Now, when I try to turn on the machine, I get a buzzer to indicate that the machine is turned on, but no display. If I give the machine for 10-15 seconds, I press the windows key to get a vibration, indicating that the machine to windows loging screen - only I don't see it because the screen is always black. Incidentally I've also had this happen on my old 7130 place, but has been able to reset hard.

  So far I have tried:

  Now the power button for 10 + seconds
  Now the power button for 30 seconds
  Holding the power and volume down (which causes the screen to cycle colors full screen: blue green red black white.) Looks like a test function)
  Now power + volume (no answer)
  Now power + windows key (no answer)

  Following the instruction given in another thread of dell support, I also unplugged the main battery. I was not confident to disconnect the CMOS battery because the connector Disconnect method was not too clear and I was worried about damaging it.

  The machine has been in charge of 5 hours - then also a full battery now.

  Are there any brilliant suggestions as to what I can do next?

  A few days ago that I met the same problem with my 7140.  The question was clearly linked to my dying battery keyboard.  I took the same steps that you did with no luck!  However, I am happy to say that the unit is now in place and running after STALL main battery, CMOS battery and all the cables in water under the main battery.  I also removed the SSD.  Once everything has been deleted, I pressed the power button for 60 seconds, drain current in the system and he left in the morning to the evening (about 10 hours).  I held the power button for 60 seconds, then replaced everything mentioned above.  The first start was slow, but he has been back to normal since then.  I have re-flashing the bios with the latest version just in case any data UEFI has been altered by the question, which is certainly possible, since the issue prevents even the UEFI to load correctly.

  I recommend, if you use a keyboard of the battery, do not use during an attempt of the steps above.  It was clearly the problem for me, diagnostics tests run since getting my Tablet upward clearly demonstrated.  Good luck!

• Satellite Pro P100 PSPAEE guard screen goes white/black

  I have a Satellite Pro P100-PSPAEE running Vista Ultimate. Recently, the screen started going black and white during the day. It does not seem to be asleep like nothing refreshes the screen. All I can do is hold the power button and restart the laptop. Have tried rash, the compressed air fan and have re - configure the minimum processor power management to 100%. Am still getting the problem everyone else encountered this problem and have you found a solution, I would prefer not to have to open the laptop and play with the heat sink.

  Don't you think that this problem could be related to problems of overheating?
  Eventually it s only a software problem

  So try first update the graphics driver and BIOS!

  One question; have you noticed the same issue using the preinstalled operating system from Toshiba?

• Satellite C660/C660D - shift key causes the screen to go black

  After purchasing the Satellite C660/c660D less than a month ago.
  I am disappointed to see the SHIFT key (left), as well as the CTRL pressed, causing the screen to go black intermittently when you type my blog...

  Course not blogger like tested also in word.
  All the ideas that is weak given the reviews and prices...
  Help... dosnt do it every time, but most of the time. Not happy!

  It is a fault, I don't expect this brand

  Thanks for any help

  Hello

  > I am disappointed to see the SHIFT key (left) and the CTRL pressed, causing the screen to go black intermittently when you type my blog...

  What does this mean exactly? Press SHIFT and CTRL button turn off the display, and you are not able to see anything on the monitor?
  Is this good?

  Have you checked if this happens with the help of an external USB keyboard too?
  If this isn't the case, I guess that your keyboard is malfunctioning and needs to be replaced.

  One of my friends had a problem with my keyboard. The cursor jumped around and some characters are displayed two times this could be resolved by the BIOS update I m do not know if your laptop uses the latest version of the BIOS, but you can check this too.

• iPhone 6 my screen is all black with white lightning

  The screen is all black with white flashes when I turn it on. Is it a broken screen / digitizer or would it be a hardware problem? This also happened to me a months I did a factory reset. The screen flickered a few minutes after, but was wrong after that until now. Tried to do the same thing again with no luck.

  I suspect a hardware problem. But try:

  -iOS: do not respond or does not light

  https://support.Apple.com/en-us/HT201412

  -Also try DFU mode recovery mode post-test

  How to put iPod touch / iPhone in DFU "Karthik doodles."

  https://geekindisguise.WordPress.com/2009/07/16/how-to-put-iPod-touch-iPhone-int o - dfu mode.

  -If failed and that you cannot completely turn completely the iOS device, leave the battery to drain completely. After loading a hour repeat the foregoing.

  -Try a different cable

  -Try on another computer

  S ' there is still not successful that usually indicates a hardware problem and an appointment at an Apple store Genius Bar is in order.

  How to make a genius bar appointment? Apple support communities

  Shop Apple Store - Genius Bar

  https://www.Apple.com/retail/Geniusbar/

• My iphone 6 s screen has totally blacked out, but siri works. What is its cause?

  My iphone 6 s screen has totally blacked out, but siri works.  What is its cause?

  Press the sleep/wake and home buttons and keep them for at least 10 seconds.

  If this is not enough, take a look at these articles Support from Apple:

  If your iPhone, iPad or iPod touch does not respond or does not turn on - Apple Support

  Use iTunes to restore the iPhone, iPad or iPod to factory settings - Apple Support.

  As a final step, try recovery mode. Turn off your unit, then plug it to your computer with the hold home button. Hold down Home button until you see the logo on the screen of your iPhone iTunes. After that on your computer, you should see the iTunes window saying that your iPhone needs to be restored to factory settings. Click Restore.

  More info here:https://support.apple.com/en-us/HT201263

  If these steps do not work, contact Apple and ask for help.

  https://www.Apple.com/support/iPhone/contact/

• Screen keeps going black on Satellite C series

  This is my second toshiba, first of all it has been with me for years.
  I have a new a satellite now c series but every now and again the screen goes all black.
  I found the only way to recover from this is to turn off and wait 60 seconds before returning.

  I can't find anything in common between the situations when this happens.
  I googled the problem and there seems to be a problem connecting to the screen on some models.
  Is it my problem or is it something else?

  Could you provide some essential information first?
  It would be useful to know what model of laptop and what system you have exactly.

  Have you checked the laptop for external monitor?
  If this isn't it. It would be interesting to know if something would be visible on 2nd screen while the internal screen is black.

• Tecra M3 - when the motorized screen is completely black

  Hi all

  I really need help with this one!
  I plugged my tour through an S-video to a flat screen and watched a movie and throughout the film, everything worked very well. I stopped regular and normal. Went home and it start and started regularly and I go into my profile and startup programs started running; It froze!

  The mouse icon was surrounded in a cube that was slightly shaded vertical lines. I restarted my computer and as it started showing the logo "XP" when it starts, it displays blue line oriented vertically once more but in the whole of the totality of the screen in groups of 4, all the corners of the screen, then when it is supposed to display your profile to choose to sign in there went blue and showed and error gives me enough time to read and stop.
  When restarting again the screen is completely black and never displays anything.

  I am able to connect via s-video for device that never to see the picture or just a regular screen but the problem now is that it shows these crazy characters across the screen as a sign with the point on top and courses I m able to do the options because I'm familiar with computers , but it does not allow to run regularly.

  I need help please this situation!

  Hello!

  Akuma's right, if you have the same problem on an external monitor s seems to be that the motherboard or the graphics chip is defective and must be replaced.

  In your case I would contact an ASP. They can check your laptop and swap the motherboard.
  http://EU.computers.Toshiba-Europe.com-online decision-making supported downloads & => find an authorized service provider

  Good bye

• The button on my lockscreen does not work on my phone. Recently, my screen went completely black. I can turn on siri. How can I get my screen to turn back?

  My 5 IPhone lockscreen button does not work so I use touch help to the screen power off and screenshot. As I was using my phone my screen went completely black. I tried to plug it into a charger and call but the screen still won't turn. My phone vibrates when I call and I can't turn on siri. I tried to search the Internet on how to re-enable it. Everything I've seen involves using the screen lock button but obviously I can not use it. How do I reactivate it?

  Hello tumbler3100,

  Thank you for using communities Support from Apple!

  I understand that your iPhone screen is returned while you were using it and the on/standby button does more either. Because your iPhone is always vibrate when you call and you are able to use Siri, it seems there is a problem with the backlight on your iPhone.

  Because you have a separate hardware two related issues going on with your iPhone, I suggest putting your iPhone in an Apple Retail Store or Apple authorized service for an assessment of your device provider. More information about these options can be found in the following link.

  Apple - Support - Service Response Center

  See you soon!

• Qosmio F10 begins with lines on the screen then goes black

  If anyone can help.

  I have a F10
  When I start it, I start with a line pattern funny on the screen that turns into dirrerant models.
  Then after it starts, it becomes black.
  Runns fan and the drive lights work as is it running.

  I can't get into safe mode and it starts properly and the screen does not black.

  This started with the mires funny when I move something one day and when I did a funny little slider occurred.

  Help, please

  Dave

  + I have more information. It will start and run in VGA mode. If I cange to the mode of the display screen is black.
  Could this be a display driver problem.

  If so where can I download a.

• Satellite A500 - screen is completely black

  I got my laptop Satellite A500 for about 4 months and already there is a problem with it.

  After that I had played a few MMO on it for a while so I decided to power out of the night. The next day I started my A500 and there was a completely gray screen and I waited for at least half an hour before holding the power button for 6 seconds just to restart, so when my A500 started to the top of the screen was completely black, but the power LED light was off, but the only lights which were the key commands on the Panel next to the screen and the power light to indicate that it carried out.

  After several tries, the problem had been held, is anyway to fix this?

  Hi mate,

  Have you plugged an external monitor? I mean without it it's hard to say what causes this problem, but I guess that he associated material s. So if the external proceedings, I think that only the internal display is the cause maybe the FL inverter?

  Anyway, in both cases you need assistance from an authorized service provider. Guys can check your laptop and fix it for you. :)

• My I phone screen see the black with a command like a dos {nand} system...

  My I phone screen see the black with a command like a dos {nand} system...

  Your phone has a serious problem. You can try to reboot (hold home and power at the same time for about 10-30 seconds buttons), but if that does not work, your hardware is probably fried. Make an appointment at your nearest Apple Store Genius Bar for confirmation.

• Satellite L500 - screen is completely black after stand-by

  I have a L500 and after that my computer is on standby, the tried to reactivate it. Now it will not display anything on the screen its completely black and have no idea of what should happen or do.

  Can anyone help?

  Hey,.

  You see something on a screen? The internal screen is probably defective, so you don t see anything.

  If an external monitor stays black I would try to remove the battery and unplug the AC adapter. Then wait at least one or all the night. Now connect the AC adapter and install the battery. Before you turn on the laptop, make sure that the battery is fully charged. Now, try to start your laptop and check what is happening.

  In the worst case it serious hardware malfunction and that means that you would need professional assistance service authorized in your country.

• 2015 Macbook screen unexpectedly to black discolouration

  Hello world!

  My brand new Macbook 2015 (just out of the box) has this funny quirk where the screen fades to black in an unexpected way. After a bit of aggressive mice that she Wiggles wakes up upward. It's as if the machine goes in mode 'sleep', even if I'm in the middle of using it (in typing, etc.)

  Is this a fault? Or is - can I enter a command that is switching off? Or she interacts with my iPhone somehow?

  My last mac is 7 years old, I'm still getting used to a lot of the functionality.

  Thanks for your time.

  The guarantee gives the right to the free phone support for the first 90 days of ownership.

  If you bought the product in the United States directly from Apple (not a retailer), you have 14 days from the date of delivery where to Exchange or return it for a refund. In other countries, the return policy may be different. If you purchased from a reseller, its return policy applies.