"you have been disconnected" message when you try to connect to the cloud
Keep trying to connect on Cloud and get him "you have been disconnected" click here to connect, enter identification information and the process begins again. I can not any program downloaded to the software that I bought it.
Hi Stephb17294292
Please see this document
https://helpx.Adobe.com/creative-cloud/KB/unable-login-creative-cloud-248.html
We hope that you find it useful.
Tags: Adobe
Similar Questions
-
error message when I try to connect to the internet wireless
When I try to use the Internet, I get a message saying 'the settings saved on this computer for the network do not match the requirements of the network. I don't know how to change the settings so that it works.
Hello
Your router could be suspicious here, you have successfully updated its firmware as a possible solution? And I would like to
Update your WiFi drivers on computers. How you are positioned in the router? Are there
obstacles in the path? Good luck that the router settings have changed, or maybe it was
reset - do you have other computers that connect to this router? You system connects to other
WiFi as a library, Starbucks or other sites?Actually try updating your driver and disabling the network logon.
Control Panel - network - write down of the brand and the model of the Wifi - double click top - tab of the driver - write
version - click the driver update (cannot do something that MS is far behind the pilots of certification). Then
Right click on the Wifi device and UNINSTALL - Reboot - it will refresh the driver stack.Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htmHow to install a device driver in Vista Device Manager
http://www.Vistax64.com/tutorials/193584-Device-Manager-install-driver.htmlDownload - SAVE - go where you put it - right click – RUN AS ADMIN.
You can download several at once however restart after the installation of each of them.
After watching the system manufacturer, you can check the manufacturer of the device an even newer version. (The
manufacturer of system become your backup policies).Repeat for network (NIC) card and is a good time to get the other updated drivers as Vista like
updated drivers.I would also turn off auto update for the drivers. If the updates Windows suggests a just HIDE as they
are almost always old, and you can search drivers manually as needed.How to disable automatic driver Installation in Windows Vista - drivers
http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspx------------------------------------------------------
Make sure you know the details of connection to your wireless router - SSID and password.
You lose connection when you do and have to redo your logon.
Control Panel - Network & Sharing Center - right, click Customize - page set of network locations.
lower left click on merge or delete network locations - REMOVE all instances of your network (and the
others you don't use anymore) - REBOOT. Start - Connect To log on to the network.-----------------------------------------------------
Check this box:
Strange problem with Internet under Vista
http://www.catonett.com/blog/archives/194Windows Vista cannot obtain an IP address from certain routers or some non-Microsoft DHCP servers
http://support.Microsoft.com/kb/928233/en-us----------------------------------------------------
And:
Network connection problems
http://windowshelp.Microsoft.com/Windows/en-us/help/33307acf-0698-41ba-B014-ea0a2eb8d0a81033.mspxI hope this helps.
Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right. -
Get 810 error message when you try to connect to the VPN using L2TP protocol
Original title: L2TP will not let me connect.
I am in Workstation 9 and in each virtual machine, I have an AD - DC (2K8R2Enterprise), CA and RRAS (2K8R2Enterprise) and my last vm is a win7 (they are all tests). All are not updated, but the PPTP, IKEv2 work without problem. The second server that has the CAs and RRAS is a member of the AD - DC server. The Win7 is not on the domain and I have Win7 a client certificate. I have ensured that the CA root of trust is in the user store and computer Trusted Root CA. I have also ensured that the Win7 client certificate is in the user store and personal computer. I get a 810 error message when I try to connect to the VPN using the L2TP protocol. I have exhaustively studied this problem and I can't find a solution to this problem. I also raise the functional level of the domain to 2K8R2.
I think this should be a simple and easy solution, but where can I find the answer?Please help me.Thank you for your time.Allan.Hi Allan,
The question you posted would be better suited in the TechNet Forums. I would recommend posting your query in the Forum TechNet site:
http://social.technet.Microsoft.com/forums/en/category/w7itpro
If you need any other assistance, let know us and we would be happy to help you.
-
6i form is disabled when you try to connect to the DB 11g
Hi all
When I try to connect to the local level of database 11g R2 from SQL * PLUS or SQL Developer. But by the form 6i using TNSNAMES connect identifier, shape gives an error and turned off!
but when connecting to the remote database using the answer TNSNAMES connect identifier that it connects successfully.
Why? and how to solve?
Note:
I formatted the server and reinstall Windows Server 2008 and then reinstall the 6i Forms, but that does not solve the problem!
Dear Sir
That we met the same problem to our customer. Follow these steps.
sqlplus /nolog connect / as sysdba shutdown immediate startup restrict alter database character set internal_use UTF8; shutdown startup
Manu.
-
Windows does not remember the setting.
When I try to connect to the net on my laptop LG I often get the message saying that windows could not connect and I have to go into the advanced settings and check the box that says allow windows to configure the network. My problem is that windows doesn't remember this setting and that I need to check the box almost everytime I try to connect. He made it with my desktop so I was wondering if anyone has a solution for this.Using a wireless router? What is the brand and model of your router? I don't think it's a matter of windows.
Troubleshooting in windows wireless network connection problems
http://Windows.Microsoft.com/en-us/Windows/help/wireless-network-connection-problems-in-Windows
Hope this helpful. Post back if your problem is not resolved in the link above.
-
Why I get this error message when I try to import? 'The following files were not imported because they could not be read. (645)"I can see them
Is working this morning!
Depends on your operating system
Go to google, try typing in
Change the Windows permissions
or
Change the permissions of Mac
-
Original title: new laptop user
I recently got a laptop EEE. When I try to connect to the internet via the usb cricket modem thing, I get an error ras entry creat/change. I tried to set the automatic start, but when I click the button start I get an error 1068. Any help?
Hello
I suggest you follow the troubleshooting steps form the article and check if it helps.
"Error 1058" error message appears when a service stops unexpectedly
http://support.Microsoft.com/kb/241584
Also refer to this article and check if it helps:
"Error 1068" error message when you try to enable Internet connection sharing
http://support.Microsoft.com/kb/827328
Note: Also valid for Windows Vista
-
Wireless connections
I upgraded my dell vostro laptop 1000 Windows xp to vista and now I can not find wifi or when I try to connect to the internet I get an error, "a cable is not plugged into the card network", "connection to the Local network. Everything worked fine until I upgraded. I noticed in my device manager, the driver for the system controller and core network are not installed. Could it be the problem? Is someone can you please help me understand this?
Hello
I noticed that you had created another similar to this question. Have you tried the steps suggested in this post?
You can also try the following methods and check if it helps.
Method 1:
Update a network adapter driver.
Method 2:
Troubleshoot network adapter problems.
http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-network-adapter-problems
-
Hi all
I had problems with my Toshiba Satellite A665 to internet connection. Lately when I try to connect to the internet, for the first minute or so it says 'No internet connection' (or something similar). Basically, he has the yellow warning triangle. Sometimes I can open the browser and search normally, but other times - and this happens more often it won't let me use my browser. When I have not fix the problem, he said that the DNS server is not responding. The problem is this same error happens all. unique. time. and the other computers in the House connect to the internet just fine. I called TWC and what I get on their part, it is "there no reported outages in your area. Useful, right? Tends to be gnawed by the use of Netflix and Hulu Plus, but this has never kept internet bandwidth to work in the past. What is going on? I'm so tired of having to go all the way down the stairs to reset the router every hour (on a good day) to get the computer to connect to the internet.I contacted Toshiba and they say that all the drivers on your computer are up to date and nothing is broken. I have also not downloaded or installed anything on my computer.If the reset of the router fixes the problem you should probably watch that as the culprit. Check the software/firmware for the router and see if you can borrow to someone router to test.
I hope this helps.
-
When I try to connect to the games, it just goes back to my home page. I can't play all games, the screen just goes back to any page, I was previously on.
Hello Gary,.
Thanks for posting your query on the Microsoft Community.
The information provided by you are not enough to provide us with troubleshooting. It would be much appreciated if you could provide us with the following information.
- Are you facing problem with this game alone or with all games?
- Are all the device drivers and updates of Windows updated?
- You did it all change important before the show?
- Have any security software installed on your system?
According to the title of your question, you can not open the collection of Microsoft solitaire on your computer. The question could be if some security software is limiting to open. It could also be if there is a corruption in the application. If you get a black screen during game play then it could also be due to drivers. So try to follow the steps below and see if it helps you to solve the problem.
Method 1.
You can temporarily disable the security software and check if it allows to open the game on your computer.
Warning: If you need to temporarily disable the antivirus to install other software. You must enable the antivirus as soon as you are finished. If you are connected to the Internet or a network, while your antivirus software is disabled, your computer is vulnerable to virus attacks.
If the problem persists, go to the next method and see if it helps.
Method 2:
Step 1:Please go to the link below, download the file and run it.
Run applications troubleshooting
Download and run the troubleshooter modern UI App.
http://download.Microsoft.com/download/F/2/4/F24D0C03-4181-4E5B-A23B-5C3A6B5974E3/apps.diagcab
Step 2:
I suggest to go through the link and follow the given procedure. Here is the link for your reference.
What to do if you have problems with a soft
http://Windows.Microsoft.com/en-GB/Windows-8/what-troubleshoot-problems-app
After the execution of the method 1 try to open applications to be updated.
Method 3
If the problem persists, try to update the drivers supplied by the steps mentioned in the article below. Drivers are updated occasionally. Windows can update automatically, or you can install the drivers updated yourself. It is important for you to have confidence in the updated drivers that you install.
Download and install the drivers
Get back to us with all the necessary information and the result of the proposed suggestion. We will be happy to help you.
Kind regards
-
When I try to connect to the internet it tells me I need network drivers.
Original title: Windows 7 drivers
Hi, I recently built a computer with a motherboard Asus H81M-E. I installed Windows 7 pro 64-bit. When I try to connect to the internet it tells me I need network drivers. Where can I find the drivers? There are all the other drivers that I need to install for the computer to function properly? Thank you for reading, I hope you can help.
I don't know a lot about the generation of computers, but I don't know that you need a network adapter to connect to the internet, which would be listed in the Device Manager. You really need to go to the asus help and support. But to give you an idea of what adapter need use Google to search for: asus h81m-e network driver
Good luck
-
Why do I get access denied error when I try to connect to the printer?
* Original title: Please help me
Why do I get access denied error when I try to connect to the printer?
Hello
Try right-clicking on the printer software when installing it and select run as administrator.
See you soon.
-
CARS: 2 nodes with Oracle single Client Access name (SCAN)
OS: OEL 5.4 64-bit
Version: 11.2.0.3
When I try to connect from the client to the RAC by using the SCANNER, I get ERROR: ORA-12541: TNS: no listenerOracle. I noticed that the service is in place and properly configured (client tnsnames).
servicioBD = (DESCRIPTION = (LOAD_BALANCE = yes) (ADDRESS = (PROTOCOL = TCP)(HOST = scanvip.domain1.local) (PORT = 1521)) (CONNECT_DATA = (SERVER = DEDICATED) (SERVICE_NAME = serviceBD) (FAILOVER_MODE = (TYPE = SΘLECTIONNER) (METHOD = BASIC) (RETRIES = 180) (DELAY = 5))))
serviceBD service
SQL > select name, failover_method, failover_type, failover_retries, goal, clb_goal, aq_ha_notifications from dba_services where service_id = 3;
METHOD NAME TYPE PURPOSE CLB_GOAL AQNOT ATTEMPTS
---------------------------------------------------------------- ----------- ---------- -------- ---------- -------- -----
serviceBD BASIC SELECT 180 NO LONG YES
But when I do not use the service created for the tnsnames file SCAN, it's that if I directly put tnsnames to connect to any work of two nodes very well.
Node 1
servicioBD =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = TCP) (HOST = 10.210.2.10)(PORT = 1521))
)
(CONNECT_DATA =
(SERVICE_NAME = orcl)
)
)
Or
Node 1
servicioBD =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = TCP) (HOST = 10.210.2.11)(PORT = 1521))
)
(CONNECT_DATA =
(SERVICE_NAME = orcl)
)
)
I have also observed the following (cluvfy).
1 all LISTENER_SCAN running node 1
2 there is no TCP connectivity
3 the error message is obtained PRVF-5713
[grid@rac1 ~] comp cluvfy $ scan - verbose
Check scan
Checking the single Client access name (SCAN)...
ANALYZE the running node name? ListenerName Port running?
---------------- ------------ ------------ ------------ ------------ ------------
scanvip.Domain1.local 1521 LISTENER_SCAN1 true true rac1
scanvip.Domain1.local 1521 LISTENER_SCAN2 true true rac1
scanvip.Domain1.local 1521 LISTENER_SCAN3 true true rac1
Checking TCP connectivity to ANALYZE listeners...
Node of ListenerName TCP connectivity?
------------ ------------------------ ------------------------
RAC1 LISTENER_SCAN1 no
RAC1 LISTENER_SCAN2 no
RAC1 LISTENER_SCAN3 no
PRVF-5713: command "/u01/app/11.2.0/grid/bin/tnsping" (DESCRIPTION = (ADDRESS = (PROTOCOL = tcp)(HOST=10.210.2.17) (PORT = 1521)))'"running on the node"rac1"produces no output no output.
PRVF-5713: command "/u01/app/11.2.0/grid/bin/tnsping" (DESCRIPTION = (ADDRESS = (PROTOCOL = tcp)(HOST=10.210.2.19) (PORT = 1521)))'"running on the node"rac1"produces no output no output.
PRVF-5713: command "/u01/app/11.2.0/grid/bin/tnsping" (DESCRIPTION = (ADDRESS = (PROTOCOL = tcp)(HOST=10.210.2.18) (PORT = 1521)))'"running on the node"rac1"produces no output no output.
Check the resolution settings of name to 'scanvip.domain1.local '...
SCAN the IP address status comment name
------------ ------------------------ ------------------------ ----------
scanvip.Domain1.local 10.210.2.18 spent
scanvip.Domain1.local 10.210.2.19 spent
scanvip.Domain1.local 10.210.2.17 spent
Verification of the installation program ANALYZES VIP and the listener has failed
The analysis check failed on all specified nodes.
Could someone help me please.
The solution was to restart scan_listener.
srvctl stop scan_listener
srvctl start scan_listener
-
I recently got a laptop (Windows XP) that has wireless when I try to connect to the internet using a lan cable plug on my netbook (win 7 starter) that has wireless it gives me limited connectivity and no internet
Hi evilcrebyc,
Consult the following Microsoft articles and make sure that all settings are correct.
How to configure Internet connection sharing in Windows XP
http://support.Microsoft.com/kb/306126
Troubleshooting Internet connection sharing in Windows XP
-
Unable to connect laptop (wireless) broadband
Recently, I changed to wired broadband. When I try to connect to the internet using my laptop, I get an error code. He says that I'm connected to the internet, but I am unable to connect.Remove any preconfigured network settings wireless then rescan to make new connection settings
Hope this will do the needfull
Please let us know
Maybe you are looking for
-
is it possible to configure VPN on airport Time capsule?
We have a private network can I put this VAC on the TC VPN?
-
Satellite A200-1BP: 1.8 Bios affect performance
Hello I am user of A200-1bp and I installed the Bios 1.8 for her.Is there any problem on 1.8 bios as it influences my laptop performance... How can I go back to original bios?Thanks for the reply
-
The battery recharges from 57 percent?
My HP nx9420 does not load increased from 57% when running on electric power. Message reads as follows: battery 57% available (plugged in, does not support). Why? How to get 100%?
-
Going to live changed, now Family Safety associated with this account will not open a session
Summary of the issueOther issues of Windows Live family safety What version of Windows Live Family Safety do you use? Version 2011 (15.4.3538.513) Choose your operating system version: Windows 7 Additional details I don't know how unbullet these (way
-
Microsoft is working on the lower graph Windows for low configure PC running on P4 processors?
Original title: Microsoft Windows XP updates International news that I listen to Microsoft is Shutting Down Windows XP support! In my opinion, good decision but it is a problem here! Problem is that half of the poor Nations currently work on old syst