YSLoader.exe has stopped working - appears when I connect Iphone 4S

Similar Questions

• Recently bought studio 15 laptop with windows 7 and I try to run need for speed pc underground game on her, but she does not appear and the message "speed.exe has stopped working" appears on the screen

  Recently bought studio 15 laptop with windows 7 and I try to run need for speed pc underground game on her, but she does not appear and the message "speed.exe has stopped working" appears on the screen. can someone help us?

  Hi Andy,.

  I checked the reported compatibility list, and the game is listed as compatible.  Work in 64-bit or 32-bit Windows 7?  I will try to reinstall the game, if you did an upgrade from Vista to Windows 7 recently.  If it is a new installation and does not, please visit the EA's Web site to get the latest patch for the game to see if that helps address your problem.  Let me know if you've done all that and you still have questions, and we can try something else.

  Kevin

• "MessagingApp.exe has stopped working" error when I turn on the computer.

  In the last few days I have been making a "MessagingApp.exe has stopped working" message every time I spend on the laptop. When I go to "All programs" all windows and Yahoo programs are red in color. I did a search for "MessagingApp.exe" but it is not found, but when I looked in 'Program Files'-'alternative E-mail' I found it but it will not run. I can't connect to Yahoo Messenger.Can help you? I have Windows Vista Home Edition thank you, McEvor

  original title: error MessagingApp.exe

  Hello McEvor,

  1. don't you make changes to the system before the show?

  2. Since when have you been faced with this problem?

  Try the following steps to try to get the fixed number.

  Step 1:

  Try to put the computer in a clean boot state to see if the same message appears

  A clean boot helps eliminate software conflicts. Visit the link below to learn how to perform a clean boot.

  http://support.Microsoft.com/kb/929135

  Note: Once the troubleshooting is over; reset the computer to start as usual in following step 7 from the link above.

  Step 2:
  An analysis of security and verification for infections.

  Note: The data files that are infected must be cleaned only by removing the file completely, which means that there is a risk of data loss.

  1. you can run a virus scan online from the link given below and check if the problem persists.

  Microsoft safety scanner

  2. in addition, make sure that you have installed on your computer, antivirus software was last updated so that it works correctly.

  If the problem persists, please contact support messenger yahoo from the link below for more support.

  http://help.Yahoo.com/l/us/Yahoo/helpcentral/

  Hope the helps of information provided.

• kdbsync.exe has stopped working - win 7 64 bit

  I am running Win 7 64 bit on an HP Pafilion HPE h8 - 1360t.  After last week round of updates my computer can't play mp4 files, the Media Center will come is no longer (Message: "Windows Media Player has stopped working"), You Tube files will no longer play, the Web of magic HP also would not come to the top, and the mysterious "kdbsync.exe has stopped working" message when I reboot.

  After hours of reading the forums, I found that it seems to be related to the AMD graphics card update.  My computer has an AMD Radeon HD card 7570.

  On the AMD website it is listed as a legacy for XP computers adapter.  I don't know why HP installed in a computer running Windows 7 64 bit with an Intel Core I7 CPU.  It does give me confidence in HP equipment.

  The AMD utility correctly detected my card and told me that I needed a driver called:

  14-4-Win7-WIN8.1-64-DD-CCC-WHQL.exe

  But when I clicked the Down load button, I received the message, "could not conntect to the server.  Could not parse error. »

  I have not found such a driver on your Web site.

  How can I get my Media Center works again?

  The idea of turning off all non-Microsoft services, scares me to death that I now have my computer how I want it.

  I've also posted on the forums of AMD that I concluded that their Board of Directors has been offending material element:

  http://forums.AMD.com/game/messageview.cfm?CATID=454&ThreadId=173935&forumid=11 you can read my response to the agent who helped me.

  Basically, I had to uninstall all the drivers AMD and sotware using functions of control panel of configuration/programs & and then run the clean uninstall AMD program: http://support.amd.com/en-us/kb-articles/Pages/AMD-Clean-Uninstall-Utility.aspx

  Then install the drivers from here:

  http://support.AMD.com/en-us/download/desktop?OS=Windows+7+-+64#AMD-catalyst-packages

  I do not recommend installing this set of drivers unless you are SURE that they are correct for your hardware.  I could not use steps 1-5 on the AMD site because the last necessary step you choose the operating system that your equipment is running.  The HP installed in my computer 'last and best' video card a year ago was so old that the operating system that is only offered to step 5 have been XP and Vista!  Be aware that HP uses inherited in its latest PC hardware.

• After you install torchlight 1, my PC stops several times and gives an error "torchlight exe has stopped working".

  Hello, I recently bought torchlight 1 for my pc, Windows 7/Vista. Ive had my pc stop repeatedly. I contacted technical support of Torchlight, sent files Dxdiag and msinfo, after reviewing, the suggested running in safe mode, but, after having tried 2 times, each time, got a dialog box stating "" torchlight exe has stopped working '. " When I send a tech, their eval was as follows:

  Looks like it's a question of system rather than a question of the torchlight.  I say this because, as the game has been started in SafeMode only the windows system files are loaded into memory.  So, when Torchlight.exe attempts to access these files with torches can not due to a problem with your file system.  At this point, the only options are the following:
   
  (1) create a new user profile and attempt to play the torches of this new profile.
  (2) depending on how long it's been since your last windows installation costs, you can try to repair windows to resolve any system problems of files or reformat your PC
  (3) contact the Support technology Windows to help your application for stay of troubleshooting problems.
   
  Using technicians on site for your comments, is their a problem with my Windows 7?

  As torchlight works perfectly on my Windows 7 x 64 laptop, I suppose that "it is a question of system rather than a question of the torchlight", too. Especially when your system shuts down instead of simply display a message on a program "stopped working", brings us to this conclusion.

  The most common causes for a corrupt Windows are "optimizers" of sorts (registry cleaners, etc.), the over-zealous antivirus programs and incomplete software installations. This can affect your overall performance of the system, not only the proper functioning of a game, so reformatting/reinstall or restore an unchanged system image from backup may be the safest advice.

• Cannot run Lenovo System Update error tvsu.exe has stopped working

  Original title: tvsu.exe has stopped working

  When I run it on my WIn7 64 bit notebook Lenovo System Update v4, I get the following:

  TVSU Application has stopped working

  A problem caused the blocking of the program works correctly. Windows will close the program and notify you if a solution is available.

  I called Lenovo and they say it's a Windows problem. This message looks like a standard message for a particular type of problem. Ideas for a solution?
  Thank you

  Thanks, Eddie!

  I've been reluctant to use these registry cleaners too but had no choice. They well with basic cleaning after uninstall. It is heartbreaking how reckless SSII is during the cleaning of the registry during the uninstallation of their software. And some of the best cleansers will warn you if a fix is dangerous or not you can not run it. But what sometimes happens is that vacuuming can cause two problems for everyone that it fixes if you aren't careful.

  I'll try to post on the site you posted. I'll post here if it helps.

• SQR.exe has stopped working

  Hi Experts,

  I came across sqr.exe has stopped working error when executing programs sqr across the line of control as well as reporting studio,.

  For some programs no error, and for some programs his complain above error after producing an output.

  Could someone help me solve this error.

  EPM installed 11.1.2.3 in windows server 2008 64 bit and using the SQL Server 2008 database.

  Thank you

  Aravind

  found the reason for the accident of the app. Its due to the 'USE database_name' command in the begin-setup section. I don't know why its causing issue. It TR supposed to work for the Sybase and SQL Server database but not work with SQL Server. in any case, I commented on this and gets the job done.

• get the message "setup.exe has stopped working" when trying to install labview 2011 or 2012 on a windows machine 7

  When you try to install labview 2011 or 2012 on a windows machine 7, I get a message "setup.exe has stopped working". I tried to run setup.exe as an administrator with the same results. I have Microsoft .NET Framework installed on the affected machine 4.5.1. Could be the cause of this problem? Or does anyone know the root cause of this error?

  Hi - are you getting it at the beginning of installation, during or after 100% progression ended?

  Is it fair to LabVIEW you install, or is it drivers too, in this case, what was the last big package that has been installed at the time?

  This can be caused by the NVIDIA chipset driver:

  https://decibel.NI.com/content/message/46299?TSTART=-130

  Thank you
  Sacha

• Error 'setup.exe has stopped working' when installing Quicken.

  Original title: setup.exe has stopped working

  I have read through the related forums and don't think I've seen a solid answer to this problem.  I'm trying to reinstall Quicken on my Dell Inspiron 530 Vista with service pack 2.  (Long and ugly tells how he got deleted at first - thank you, Intuit).

  When I try to install Quicken, I get the above error message.  I tried the clean boot solution; I tried to enter the installation and execution of the exe directly from there; I tried to do a right click to open/run as administrator... etc.

  I have NOT run BigFix.com or other third-party software to solve this problem - I'm very comfortable with another piece of software download and throw into the equation.  What is a corrupted registry and I have TO run third to fix?  Is it a bug of Vista - is there a fix of bug for her?

  I really don't like that to 'guilty' at this point, I just want to repair and recover my electronic payments!  Help, please!

  Hey, Keenon,.

  Please, remove all existing components of Quicken from the computer and do a fresh install.

  Step 1: use QcleanUI uninstall Quicken

  Follow the instructions in the article below for more information on how to use this tool.

  The use of QcleanUI to uninstall Quicken

  
  Step 2: Install Quicken

   

  Refer to this article for installation help.

  Installation of Quicken on Microsoft Windows 7 or Vista

  Kind regards

  Shinmila H - Microsoft Support

  Visit our Microsoft answers feedback Forum and let us know what you think.

• "messagecheck.exe has stopped working" message any time when I started my windows 7

  Following is the display window:

  ----------------------------------------------------------------------------------------------------------
  MessageCheck.exe has stopped working
  Windows can check online for a solution to the problem.
  --> Online and are looking for a solution and close the program
  -->, Close the program
  ----------------------------------------------------------------------------------------------------------
  I did the two one after another, still no help to stop it. He is always arise every time when I start Windows 7 and continues to POP up at any time when I use Windows 7. Looking for a solution to stop it.

  Hi abdou,.

  Is your machine a HP?

  If so, please take a look at the link below with a possible solution:

  http://h30434.www3.HP.com/T5/printer-all-in-one-software/MessageCheck-exe-after-uninstalling-HP-PhotoCreations/TD-p/1496147

  I hope this helps!

• Error message receiver: alidiskviewer.exe has stopped working when you insert a cd with medical images

  Original title: alidiskviewer.exe has stopped working

  I have inserted a cd with medical images on this subject and received this message. What is a windows or another problem. I ran the diagnostic of fix - it, but this did not help.

  Hello

  This can happen if the file is not compatible with Windows Vista.

  Have you tried the steps by Marilyn O, moderator of the Forum in the previous link to use the compatibility mode of the previous link?

  If you are always faced with the question, then you can search the Alidisk Viewer option in programs and features and even uninstall and check.

  For more information, you can read the following article to uninstall the program.

  Uninstall a program

• When you try to uninstall a program, I get the message setup.exe has stopped working, can someone help me with this problem

  I'm trying to uninstall a printer, but only part of it was uninstalled, there are 2 parts more than the necessary printer uninstalled and I get the message setup.exe has stopped working

  Hello

  ·         Faced with this problem specific to uninstalling the application with the printer, or with another application?

  ·         What is the brand and model of the printer?

  You can follow the method below and check if it helps.

  Method 1:

  I would say as you put your computer in a clean boot state and check if it works.

  How to troubleshoot a problem by performing a clean boot in Windows

  http://support.Microsoft.com/kb/929135

  Note: Don't forget to reset the computer to start as usual, once the problem is resolved. Follow step 7 on top of the kb article.

  Method 2:

  I suggest to install the application printer again and then try to uninstall it, if only the problem is specific to the printer.

  http://Windows.Microsoft.com/en-in/Windows-Vista/uninstall-or-change-a-program

  Hope this helps,

• Satellite Pro U400 - TrueSuite Manager setup.exe has stopped working

  I have a Satellite Pro U400 running Vista Business (OEM) and at the start of a desktop computer TrueSuite Manager pop-up message appears telling me there is an update to install.

  When I try to install the update, I get a window that says Setup.exe does not work.

  Signature of the problem of the relationship an APPCRASH-is30C0.exe with the exception C0000005 code.

  I tried to uninstall the TrueSuite Manager through Windows uninstaller programs, but get the same message - setup.exe has stopped working.

  Appreciate advice on how to solve this problem.

  Hello

  I think that it is a simple case of corrupted registry entries and files that could belong to the TrueSuite Manager software.

  I agree with the previous user, and I recommend to reinstall this software again.
  You may need to clean the OS before installing the Truesuite again.
  In this case, I recommend the CCLenaer. It s a simple and free tool and can be downloaded on most Web sites.

  Google and you should find more information.

  See you soon
  Jayjay

• I get a message saying that Windows Explorer has stopped working and when I restart it pop again.

  Hi I have windows vista basic and it worked very well until yestaday and I got a message saying windows Explorer has stopped working and when I click on restart 3 seconds later, he appears once again?

  original title: Windows Vista Basic worked fine until yesterday and now I get messages saying that Windows Explorer has stopped working.
  Hello

  Use the startup clean and other methods to try to determine the cause of and eliminate
  the questions.

  ---------------------------------------------------------------

  What antivirus/antispyware/security products do you have on the machine? Be one you have NEVER
  on this machine, including those you have uninstalled (they leave leftovers behind which can cause
  strange problems).

  ----------------------------------------------------

  Follow these steps:

  Start - type this in the search box-> find COMMAND at the top and RIGHT CLICK – RUN AS ADMIN

  Enter this at the command prompt - sfc/scannow

  How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
  generates in Windows Vista cbs.log
  http://support.Microsoft.com/kb/928228

  Also run CheckDisk, so we cannot exclude as much as possible of the corruption.

  How to run the check disk at startup in Vista
  http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html

  ==========================================

  After the foregoing:

  How to troubleshoot a problem by performing a clean boot in Windows Vista
  http://support.Microsoft.com/kb/929135
  How to troubleshoot performance issues in Windows Vista
  http://support.Microsoft.com/kb/950685

  Optimize the performance of Microsoft Windows Vista
  http://support.Microsoft.com/kb/959062
  To see everything that is in charge of startup - wait a few minutes with nothing to do - then right-click
  Taskbar - the Task Manager process - take a look at stored by - Services - this is a quick way
  reference (if you have a small box at the bottom left - show for all users, then check that).

  How to check and change Vista startup programs
  http://www.Vistax64.com/tutorials/79612-startup-programs-enable-disable.html

  A quick check to see that load method 2 is - using MSCONFIG then put a list of
  those here.
  --------------------------------------------------------------------

  Tools that should help you:

  Process Explorer - free - find out which files, key of registry and other objects processes have opened.
  What DLLs they have loaded and more. This exceptionally effective utility will show you even who has
  each process.
  http://TechNet.Microsoft.com/en-us/Sysinternals/bb896653.aspx

  Autoruns - free - see what programs are configured to start automatically when you start your system
  and you log in. Autoruns also shows you the full list of registry and file locations where applications can
  Configure auto-start settings.
  http://TechNet.Microsoft.com/en-us/sysinternals/bb963902.aspx
  Process Monitor - Free - monitor the system files, registry, process, thread and DLL real-time activity.
  http://TechNet.Microsoft.com/en-us/Sysinternals/bb896645.aspx

  There are many excellent free tools from Sysinternals
  http://TechNet.Microsoft.com/en-us/Sysinternals/default.aspx

  -Free - WhatsInStartUP this utility displays the list of all applications that are loaded automatically
  When Windows starts. For each request, the following information is displayed: Type of startup (registry/Startup folder), Command - Line String, the product name, Version of the file, the name of the company;
  Location in the registry or the file system and more. It allows you to easily disable or remove unwanted
  a program that runs in your Windows startup.
  http://www.NirSoft.NET/utils/what_run_in_startup.html

  There are many excellent free tools to NirSoft
  http://www.NirSoft.NET/utils/index.html

  Window Watcher - free - do you know what is running on your computer? Maybe not. The window
  Watcher says it all, reporting of any window created by running programs, if the window
  is visible or not.
  http://www.KarenWare.com/PowerTools/ptwinwatch.asp

  Many excellent free tools and an excellent newsletter at Karenware
  http://www.KarenWare.com/

  ===========================================

  Vista and Windows 7 updated drivers love then here's how update the most important.

  This is my generic how updates of appropriate driver:

  This utility, it is easy see which versions are loaded:

  -Free - DriverView utility displays the list of all device drivers currently loaded on your system.
  For each driver in the list, additional useful information is displayed: load address of the driver,
  Description, version, product name, company that created the driver and more.
  http://www.NirSoft.NET/utils/DriverView.html

  For drivers, visit manufacturer of emergency system and of the manufacturer of the device that are the most common.
  Control Panel - device - Graphics Manager - note the brand and complete model
  your video card - double - tab of the driver - write version information. Now, click on update
  Driver (this can do nothing as MS is far behind the certification of drivers) - then right-click.
  Uninstall - REBOOT it will refresh the driver stack.

  Repeat this for network - card (NIC), Wifi network, sound, mouse, and keyboard if 3rd party
  with their own software and drivers and all other main drivers that you have.

  Now in the system manufacturer (Dell, HP, Toshiba as examples) site (in a restaurant), peripheral
  Site of the manufacturer (Realtek, Intel, Nvidia, ATI, for example) and get their latest versions. (Look for
  BIOS, Chipset and software updates on the site of the manufacturer of the system here.)

  Download - SAVE - go to where you put them - right click - RUN AD ADMIN - REBOOT after
  each installation.

  Always check in the Device Manager - drivers tab to be sure the version you actually install
  presents itself. This is because some restore drivers before the most recent is installed (sound card drivers
  in particular that) so to install a driver - reboot - check that it is installed and repeat as
  necessary.

  Repeat to the manufacturers - BTW in the DO NOT RUN THEIR SCANNER device - check
  manually by model.

  Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
  http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

  How to install a device driver in Vista Device Manager
  http://www.Vistax64.com/tutorials/193584-Device-Manager-install-driver.html

  If you update the drivers manually, then it's a good idea to disable the facilities of driver under Windows
  Updates, that leaves about Windows updates but it will not install the drivers that will be generally
  older and cause problems. If updates offers a new driver and then HIDE it (right click on it), then
  get new manually if you wish.

  How to disable automatic driver Installation in Windows Vista - drivers
  http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
  http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspx

  ===========================================

  Refer to these discussions because many more excellent advice however don't forget to check your antivirus
  programs, the main drivers and BIOS update and also solve the problems with the cleanboot method
  first.

  Problems with the overall speed of the system and performance
  http://support.Microsoft.com/GP/slow_windows_performance/en-us

  Performance and Maintenance Tips
  http://social.answers.Microsoft.com/forums/en-us/w7performance/thread/19e5d6c3-BF07-49ac-a2fa-6718c988f125

  Explorer Windows stopped working
  http://social.answers.Microsoft.com/forums/en-us/w7performance/thread/6ab02526-5071-4DCC-895F-d90202bad8b3

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="" -="" mark="" twain="" said="" it="">

• "Plugin - container.exe has stopped working" error during installation of Firefox 36.0 via SCCM if Firefox is open during installation.

  When installing Firefox 36.0 via SCCM (System Center Configuration Manager), if the previously installed version of Firefox is open during the new installation, an error, "Plugin - container.exe has stopped working. A problem caused the blocking of the program works correctly. Please close the program. This problem occurs only if Firefox is open during the installation, otherwise the installation is successful. Note: I have included a taskkill to 'firefox.exe' in my installation script to stop Firefox runs.

  There are new logic in Firefox 36 monitor to stop crashes while the Mozilla Crash Reporter can capture data. This could have the effect of killing her task, I'm not sure. Maybe you have to kill plugin - container.exe before firefox.exe? I'm not familiar with SCCM and it might have a more graceful way to close an application.