Z30 on networks blackBerry error message "unauthorized device. #6 "on Z30 MM

Similar Questions

• BlackBerry smartphone Error Message "USB device not recognized"

  I have a BB Curve 8320 on Orange UK.  When I connect my device or my work PC (Dell laptop Windows XP SP3) or my PC at home (Sony Vaio Vista SP1) shows the error message "" USB device"unrecognized and say that the USB device has malfunctioned?  It seems to work very well in outside it and connected to the PC fine until ten days ago.  I tried to reinstall the Desktop Manager software (and updated) and I conducted several soft resets on my device; nothing seems to work?

  Can anyone help please?

  on the laptop, make sure that the power cord is plugged directly into the PC and try a USB port at the back (without stand) if that is not working, call your carrier, it looks like you need a replacememnt

• Drive external hard USB - cela used to work now I get an error message = "this device cannot start. (Code 10) "Any suggestions?

  Drive external hard USB - cela used to work now I get an error message = "this device cannot start. (Code 10) "Any suggestions?

  Hello

  I suggest to refer to this link and follow the steps in this link and check if that helps:

  http://support.Microsoft.com/kb/943104

  It will be useful.

• Cannot read Photostory. Error message: "a device inthi system does not work.

  After building a slideshow Photo Story 3, I'm trying to play and get the error message: "a device attached to the system is not functioning:.»

  Unable to identify this device.

  Any ideas out there?

  Hi ld1925,

  • Did you the latest changes on the computer?

  Method 1

  I suggest that you install the updated drivers for the graphics card on the computer by visiting the manufacturer of the card or the computer manufacturer's website and check if it helps.

  If the update of drivers help not then uninstalled computer display card drivers, then reinstall the latest driver update.

  How to manage devices in Windows XP

  http://support.Microsoft.com/kb/283658

  Use Add/Remove remove programs and Device Manager to uninstall the drivers for the computer.

  How to change or remove a program in Windows XP

  http://support.Microsoft.com/kb/307895

  Method 2

  If the previous step fails, then it is possible that some third-party programs installed on the computer is causing the problem.

  I suggest that you put the computer in a clean boot state and check if it helps.

  To help resolve the error and other messages, you can start Windows XP by using a minimal set of drivers and startup programs. This type of boot is known as a "clean boot". A clean boot helps eliminate software conflicts.

  See the link below to learn more about how to clean boot.

  How to configure Windows XP to start in a "clean boot" State

  http://support.Microsoft.com/kb/310353

  Reset the computer to start as usual

  When you are finished troubleshooting, follow these steps to reset the computer to start as usual:

  (a) click Start, type msconfig in the search box and press ENTER.

  (b) If you are prompted for an administrator password or for confirmation, type your password or click on continue.

  (c) under the general tab, click the Normal startup option, and then click OK.

  (d) when you are prompted to restart the computer, click on restart.

  Method 3

  If the previous step fails, see if the problem continues in a new user account.

  How to create and configure user accounts in Windows XP

  http://support.Microsoft.com/kb/279783

• Network connectivity error message

  I have a Dell GX620 desktop computer and a laptop Dell D430 (two Windows 7).  I have Comcast Internet 50mbps with a gateway device 1 (Arris TG 862).  Whenever a race a diagnosis at home on two computers - wired and wireless - I get the error message: "your computer seems to be configured correctly, but the device or resource (DNS server), does not.  When I take the laptop in other places I never get this error message.  I saw a lot of posts online of people who receive the same error message, but all were unable to access the internet.  My problem is that I get this error message even though I CAN access the internet.  It makes no sense at all.  Other (possibly related) issues: 1) on the laptop I always wired 57mbps but on the computer laptop results are wildly incompatible (25-52mbps connected) and (5-30 Mbit/s wireless).  (2) on Xirrus WiFi Analyzer, the seller for my network is listed as Barnes-Noble.  Suppliers for other networks are indicated as Netgear, Arris, 2Wire, etc. or unknown.  There is another who has Barnes-Noble as a provider and network that was a BSSID identical to mine except for the second character.  The Barnes-Noble only I know is a bookstore and the closest is at least 5 miles away.  Also, this is meaningless.  (3) on Xirrus WiFi Analyzer when I run the accessible for DNS connectivity Test results ' fail: 100% Ping loss. "  Also, this is meaningless.  On Xirrus WiFi Analyzer when I run a quality Test of the result for the packet loss is 0%. Score of ping is ms 120-130, while that site says that even a decent score band width must be less than 100 and a jitter of Score is 15-20 ms.  I would be very happy if someone could shed some light on the issues detailed above.

  Hi hope,.

  Try resetting the TCP/IP stack. Go to the search box of the start menu and type cmd and press ENTER. In the command prompt window, type netsh int ip reset, and then press ENTER. If this does not help, type ipconfig/flushdns , and then press on enter. Then, restart your computer.
  Let me know if it helps!

  Mithrandir

• hp officejet pro 8500 a - Wireless Network Setup Error Message premium

  I have my printer connected to my desktop via USB, and print very well. I want to connect the printer to the network wirelessly to other computers can ePrint. However, whenever I want to initaite the wireless configuration wizard, I get the following error message: wireless communication has been disabled. Contact your network administrator or the person who set up the printer.

  @khalidalkalla, please check your private message Inbox.

• Portege R500 - error message "sound device is not supported" THotkey

  Hello

  Whenever I have start up my Portege R500 I get THotkey message error "sound device is not supported. \
  The same error message repeats when I touch the volume icon. There is also no sound.

  Any idea what causes this? I have tried to uninstall and reinstall the driver most that can affect the shortcut key and the sound.

  Thank you

  Nico

  Is it Vista or XP?

  Have you installed Windows yourself or it was preinstalled?

  Maybe the wrong driver was installed (of another model for example).

• error message this device driver has stopped responding, but recovered. What can I do to fix this?

  HP G72-b60US notebook

  Windows 7 Edition 64-bit family

  Intel graphics card

  I play a game and it's going very well for 10 minutes, then screen wil go black and trying to "fight" to override the game to bring up the office. then an error message is displayed to tell the device driver is not responding but recovered. I'm trying to get back into the game, but it doesn't allow me not-screen remains black when I try to turn on or off. so I have to ctrl-alt-del to bring up the Task Manager to stop the game. Then, the computer and the graphics card works fine. I tried to see if the driver for the graphics card needs update but the CV Wizard and windows update tells me that everything is fine. Help?

  Thank you.

  Angie

  Hello

  A.

  Check that your laptop is overheating or not.

  To do this use HWMonitor (free and recommended).

  If it detects overheating, consult this guide.

  B.

  Update the Bios.

  The update of the Bios?

  
  

  Download the last update of the Bios here.

  Connect the power adapter to the netbook.

  Disconnect from the Internet. Close all running programs. Disable anti-virus and firewall.

  Double-click the Bios update exe file. It may take some time, so it is important to remain patient, not to interrupt the process. Allow the laptop to restart after applying the BIOS update.

  Although this update is running are not:

  • Turn off your laptop,
  • Disconnect the power adapter,
  • try to run any software or do anything thereon.

  Note:

  The Bios update process is always risky. You do this at your own risk.

  C.

  Update the graphics driver.

  Uninstall the Intel graphics driver.

  Resources:
  Uninstall software in Windows 7

  Uninstall or change a program in Windows 7

  Download and install the latest driver from here.

• Exchange Server of Smartphones blackBerry error message

  While my phone with Outlook sync (2010), I received an error message; "Cannot connect to Exchange Server. Please provide a password valid or verify access to the server. "I have never seen this in a few years with the same phone and Outlook. I wouldn't change anything. What could have caused this?

  Thank you.

  Hello and welcome to the community!

  Here's a knockout who deals with this error:

  • KB29092 The message "cannot connect to Exchange Server. Please check the server access or provide a valid password"appears when you try to synchronize with BlackBerry Desktop Software

  I hope that it contains something useful! There are also several existing threads on this site, which discuss exact error... your opinion of those who may prove useful, and a search of this website, by using the error message, error code or symptom, should reveal all the existing threads that are applicable to you.

  Good luck and let us know!

• Smartphones from blackBerry error message "Insert SIM Card"

  I can't get my phone to work due to the error message.  This is a brand new SIM card and should work.  I used a similar card a year ago for a blanket to Costa Rica, and it worked fine.  I took the battery and SIM card many times but also tried to disable the wifi but no luck.

  OK, then check this KB and see if something he recommends is to value:

  • KB10824 Data connection or insert SIM card rejected

  BTW - have confirmed that this specific BB is even compatible with the network of ice? For example, if the BB manages a set of frequencies still the carrier uses different frequencies, so there is nothing that can be done about it that the BB would simply not compatible with the ICE network. Note that I don't know the answer you need here... you will need find features in the frequency of the BB as well as those who use ice.

  Good luck!

• AppWorld Smartphones blackBerry error message

  Can someone help me, please?

  I get an error message when I try to use AppWorld to download. I am trying to download Dropbox, but the same thing happens with any application.

  I get to the screen of the application and click Download and it begins to 'think', then it brings up this message:

  "There is a problem with the current session. Please sign in to continue (error Id: 30702)

  I went on the Dropbox website and tried to download from here, but he got half way through the download and showed an error.

  I also have the "eception exception java.lang.Error" message too.

  I tried to pull the battery, but this does not seem to have any effect.

  

  Hello and welcome to the community!

  Here's a knockout who deals with this error:

  • KB28212 "Unable to connect to your BlackBerry ID account" or "Impossible to update your BlackBerry ID account information" error occurs on a BlackBerry smartphone running BlackBerry 7

  I hope that it contains something useful! There are also several existing threads on this site, which discuss exact error... your opinion of those who may prove useful, and a search of this website, by using the error message, error code or symptom, should reveal all the existing threads that are applicable to you.

  Good luck and let us know!

• Receive the error message"this device can perform faster if you connect it to a 2.0 port" in the taskbar

  In the taskbar, this always happens "this USB device can perform faster if you connect it to a 2.0 port" and is a list of the USB Composite device. How can I prevent this arise?

  Hello

  1. Once you get this error message?

  2. it happens with all USB devices or is this a problem with a specific USB device?

  3. has the USB works well before camera?

  Method 1 : perform the following steps to stop this message from popping and check whether the problem is resolved or not.

  has. in the search box Type Device Manager start and click on enter.

  b. find now the option called Universal serial bus.

  c. now right-click on it and select search the hardware changes.

  Method 2 : run the troubleshooter of material and check if the problem is solved or not.

  Open the hardware and devices Troubleshooter

  Hope that helps.

• error message: "USB device not recognized".

  How can I get rid of the VERY annoying error message:

  "Unrecognized USB device".

  My camera works fine, but I get this message and

  It doesn't go away little matter what I do.

  Hi CaladhielEruna,

  I suggest that you try the methods mentioned below and check if that helps.

  Method 1: Run the hardware and devices troubleshooter.

  http://Windows.Microsoft.com/en-us/Windows7/open-the-hardware-and-devices-Troubleshooter

  Method 2: Uninstall and reinstall the USB controller

  (a) click Start, type devmgmt.msc in the start search box, and then click Enter. Device Manager opens.

  (b) expand Bus USB controllers.

  (c) right-click the first USB controller under Bus USB controllers and then click on uninstall to remove it.

  (d) repeat for each controller USB is listed under Bus USB controllers.

  (e) restart the computer. After the computer starts, Windows will automatically check for changes on the hardware and reinstall all USB controllers that you uninstalled.

• Error message: cannot download. License to make mistake.  License already filled by another user. Deleted digital editions and reinstalled.  Same error message unauthorized and Bill and got

  Error message: cannot download.  License to make mistake.  License already filled by another user.  Deleted digital editions and reinstalled.  Unauthorized and law and got same message

  The mistake of saying that the eBook are related to no other Adobe ID. You have opened the eBook until you authorize Digital Edition?

• Cannot create snapshots of error message replica devices

  Greetings,

  I'm currently testing my recovery plans for all of my groups and I get the following error message:

  Cannot create snapshots of the replica devices. (Include a screenshot of the error) By the message, the storage Port cause is not identified, either the storage port information in NFS list is incorrect else check the option "isIP4" in the file ontap_config corresponds to the IP address in the field of the NFS.  Any suggestion? Thanks for all your comments as always!

  OK after doing some reading on the NetApp KB Portal, the problem was related to a firewall policy applied to the LIF configured for NFS traffic. After I change the firewall for data management policy, I could test my recovery plan. Jürgen Vervoort was therefore in the right direction, but it was on the storage level.