1 TB SDD for Portege Z30 - A - 15 M

Similar Questions

• New Bios for Portege Z30 - has Changelog

  Hello
  If someone has tested the new bios (4.20 - WIN (ECB1.40)) for the Toshiba Portege Z30 - A or is it an official change log?
  Toshiba did not alter the fan behavior? The fan isn't fort/boring, but he could kick a little later.

  Concerning

  Someone has already installed the new bios?

• What is the number of keyboard for Portege Z30-A-1E5 part?

  Hello
  I want the Toshiba Portege Z30 A 1E5, but is apparently available for purchase of the German and Austrian sellers with the QWERTZ keyboard. I would like to buy an and Exchange on the keyboard AZERTY or QWERTY (UK).

  However, I spoke with a company that and they can't confirm that they can get a part unless I can provide a reference number of keyboard (they also cannot give me a quote without it), but this number does not seem to be easy to get their hands on without actually having the computer and take off the keyboard and research under! I feel a little nervous about spending so much money when there's a chance that I won't be able to reverse the keyboard.

  So my question is, can someone tell me what the part number of the keyboard is for the a-z30-1e5 portege?

  Any help would be appreciated!

  Kate

  Hi, Kate

  I m wondering why you want to buy a Portege Z30-A-1E5 that isn't available in the United Kingdom?
  The notebooks are pre-installed with a Windows system in different languages. In the case of Portege Z30-A-1E5 available in Germany, the system language would be German.
  The keyboard also supports a different layout.

  Portege Z30-A-1E5 was equipped with a processor i7, SSD 512 GB and 16 GB of RAM disk.
  Very similar Portege laptop, Z30 - has - 1 6 was released in the United Kingdom. Its preinstalled with the Windows system in the English language and English keyboard layout.
  Of course, the hardware specs are a little bit lower (256 GB SSD drive and 8 GB of RAM) but I think that this could be improved is much easier to replace the keyboard.

  However, where you can buy the Portege Z30-A-1E5, I recommend contacting the maintainer authorized Toshiba in your country for replacement keyboard. Guys could control the keyboard of Toshiba law and could perform the replacement.

  Just a note: the replacement must be performed by service provider authorized because of the validity of the guarantee. The replacement must be performed by an approved engineer to keep the warranty valid.

• Need to install Win7 order for Portege Z30

  Hello

  I intend to "down-grade" my new Z30 to Windows 7 Pro 32 Bit. This is how I can run some specific software.

  I have all the 32-bit drivers downloaded and ready. Can someone give me an idea about the order of installation good (or better)?

  Thank you very much.

  Hello

  I ve checked the download page of Toshiba on http://www.toshiba.eu/innovation/download_drivers_bios.jsp and I can see your machine is fully supported for Windows 7 32 bit, so you can find all necessary drivers, tools and utilities there.

  Order of installation is as follows:

  SP3 in Windows 7
  Infineon TPM professional package
  Chipset SW installation utility
  Intel Management Engine Interface
  Intel AMT software
  Intel driver
  NVIDIA display driver
  Intel Rapid Storage Technology driver
  Technology of quick start Software Intel
  Realtek Audio Driver
  Intel LAN driver
  Intel USB3.0 driver
  Realtek card reader
  Intel Wireless LAN driver
  Driver Bluetooth filter Intel
  Intel Proset
  Bluetooth Stack for Windows by Toshiba
  ALPS Pointing Device Driver
  TOSHIBA fingerprint utility
  O2Micro smart card reader driver
  Intel Smart Connection technology
  TOSHIBA Value Added Package
  Intel Wireless Display
  Intel NFC Software Kit
  His Studio of SDR 1
  PatchFiles

  If something is not listed it as specific tools and utilities Toshiba install them following this list.

  I hope that everything will be OK.

• Unable to connect 2 external monitors via the Port Replicator using Portege Z30 - 16U

  Hi all

  I need hell, I just moved from another laptop for Portege Z30 - 16U, I spent hours trying to connect my 2 external monitors to my Replicator Port Hi-Speed III 120W, but my laptop will see a monitor.

  I used 2 external monitors with my laptop for years because I do a lot or reading and I don't want to use the one and the laptop screen.

  I tried the mixture of a VGA and a HDMI and VGA cables, but nothing works.

  Can anyone tell me how I can connect and discover 2 external monitors with this laptop and port replicator, I can't believe that this is not possible, it makes no sense that Toshiba would then technilogically behind other laptop manufacturers.

  Thank you

  Liga

  Hello

  I'm not familiar with the Z30 Portreplicator, but the general behavior of the replicators of the double-displayconnector, is that 1 can be used.
  Not 2 simultaneously.

  I could be wrong, and you should easily be able to check it out - use only 1 at a time.
  First, then the other.
  If the two works when used alone, then my suspicion is right.

  I hope this helps!

  TOm BR

• Portege Z30 - B - Toshiba picture after change for Linux installation

  Hello.

  I just bought Portege Z30 - b.

  I want to replace windows with linux (fedora I think), I did the windows image by using Recovery Media creator on USB.

  So if now I will install linux I delete all the files on the SSD.
  Maybe futture I want to reuse windows, can I return to original state by using this USB?

  If I install this linux, what happens with toshiba tools accessed through the BIOS/UEFI?

  Where can I get windows CDkey?

  Thanks for the help!

  BTW: great laptop!

  can I go back to original state using this USB?

  Yes, recovery would fix the laptop back to factory settings.

  If I install this Linux, what happens with Toshiba tools accessed through the BIOS/UEFI?

  I'm afraid that I'm not sure what you mean exactly with Toshiba tools accessed through the BIOS...

  Toshiba tools do not support Linux... you can install Linux but Toshiba software wouldn't. But you can still access the F2 BIOS support and turn the device

• Portege z30-b-14z 10 Pro 64 bit will not be in hibernation

  Dear all,

  My new Portege z30-b-14z 10 Pro 64 bit will not be in hibernation.

  I can not hibernate through the following methods:
  1. click on 'Start', 'power', 'Hibernate '.
  2. press x and windows, click on 'Close or disconnect', click on 'standby '.
  3 a prompt as administrator and type "powercfg/h on" and then press ENTER to activate the Hibernate mode, then type "shutdown/h/t 0".

  Yet once, nothing works. I want to really just close the lid of my laptop and have hibernate.

  Well want to can someone help?

  See you soon,.
  Bender22

  Dear all,

  There has been no response. This is my 2nd Portege for work and I can't go to the Hibernate in Windows or Ubuntu. What gives? I have this job and must close and run meetings with out having to stop and shut down all my programs that I have running. I need this laptop to Hibernate.

  I also have a DynaBook (of Japan) and the R830 running current House to run Win 7 64 - bit professional. They cannot Hibernate or the other.

  Can anyone help, because Toshiba cannot.

  See you soon,.
  Bender22

• Portege Z30 PT311E - X 11 crash on Linux Debian Jessie

  I have a Portege Z30 PT311E-01P03GIT

  The laptop works very well in dual boot with Windows 7 and Linux Debian 8.2 (Jessie).
  Under Linux, all hardware is recognized and work, but one notable problem occurs at any time, I try to open a movie from Youtube (or do the equivalent local thing).
  The Xorg server dies, killing all programs and user processes and start the KDM login prompt.

  It connect new, all continue to work until the next Youtube movie embedded in a site or things like that.

  Other than that, all the features and video modes work.
  Any help to solve this problem?

  Thank you

  Below, the initialization of the kernel dmesg messages

  Jan 25 13:39:40 core scree: Console [1.985921]: switch to the color buffer device frame 160 x 64
  Jan 25 13:39:40 Screes kernel: [1.988746] 0000:00:02.0 i915: fb0: inteldrmfb frame buffer device
  Jan 25 13:39:40 Screes kernel: [1.988763] i915 0000:00:02.0: registered declaring panic
  Jan 25 13:39:40 Screes kernel: [2.050218] ACPI: video device [GFX0] (multiple heads: Yes rom: Yes post: no)
  Jan 25 13:39:40 Screes kernel: [2.050388] input: video Bus as/devices/LNXSYSTM:00 / LNXSYBUS:00 / PNP0A08:00 / LNXVIDEO:00/input/input6
  Jan 25 13:39:40 Screes kernel: [2.050445] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0

  Hello

  You can try to disable the frame buffer by adding the following for initialization arguments in GRUB

  fb = false

  Here is a non-Toshiba, not Debian related article describes some useful steps:

  http://KB.Digium.com/articles/FAQ/HO...using-problems

  I hope this helps.

  Tom BR

• Portege Z30 - I am unable to send SMS

  I have a Portege Z30-A-13F. On the previous Portege, Ericcson device shipped, I used the Toshiba Wireless Manager and the SMS from Toshiba utility in access card for messages (SMS).

  Currently, with the integrated chip of Sierra, I am able to access the network, but there is no interface for SMS on the AirCardWatcher tool.

  The Wireless Manager does not work (I think it only works with Ericsson devices).
  Is it possible to use the SMS with this computer?

  Thank you very much

  AFAIK this is regardless if the laptop supports the Ericson or the Sierra 3 G module.

  The Toshiba Wireless Manager should work fine in two modules.

  Check this document... He explains how to set up and establish a 3G connection via the Manager preinstalled Toshiba wireless.
  http://APS2.toshiba-tro.de/KB0/FAQ1A037W0000R01.htm

• Portege Z30 Module problem - A - 13 L 3 G

  I had a problem with a new Portege Z30 - A - 13 L.

  Module 3 G / 4G do not work. As a first step, the Air software map Watcher on the first Installation of Windows 7 detects the sim card and showed a signal, but it Air card Watcher Software still not said no reception (in German: Kein receipt).

  I also put the right apn in the profile.
  I had this problem with 2 different operators sim cards.

  Cause I wanted to use Windows 8.1 anyway I installed it with the original recovery disks.
  The original Windows 8.1 don t comes with Air card Watcher, so you must do with the instruments of the Board of Directors of Windows 8. Windows 8.1, I had a same problem. It detects the SIM, but it says no network (in German: Kein Netz). I put t found the possibility of changing the apn in 8.1 of Windows until you have a mobile connection.

  Initially the Device Manager displays the Module of Sierra Wireless EM 7305 as a network card.
  Then, I uninstalled the driver of Sierra Wireless and installed the Toshiba page.

  After that the Sierra Wireless Module presents itself as a Com device in Device Manager. The cause so much of this networker of Sierra Wireless adapter isn t it, the mobile broadband connection don t even shows charms Windows 8.1 bar upward.

  After that I reinstalled again the image Windows 8.1 with the original recovery disks.
  I saw said that Sierra Wireless Driver has been installed, but the Module EM7305 of Sierra Wireless is presented with an exclamation mark in Device Manager.

  Then I uninstalled and installed the driver manually again.
  He appears again as com device in Device Manager.

  So I think that the module has been a hardware failure. What do you think?

  > After that I reinstalled again the image Windows 8.1 with the original recovery disks.
  > I saw said that Sierra Wireless Driver has been installed, but the Module EM7305 of Sierra Wireless is presented with an exclamation mark in Device Manager.

  On the page of the Toshiba UE driver, you can find and download the [Sierra Wireless Driver LTE 4 G driver | http://www.toshiba.eu/innovation/download_driver_details.jsp?service=EU&selCategory = 2 & selFamily = 4 & selSeries = 362 & selProduct = 17549 & STAS hortMod = null & language = 13 & selOS = 46 & selType = all & year = upload & monthupload = & dayupload = & useDate = null & mode = allMachines & search = & action = search & macId = & country = a he's & selectedLanguage = 13 & type = all & page = 2 & ID = 90092 & OS ID = 46 & driverLanguage = 42]
  This Wireless Broadband Mobile driver is used to transfer data at higher rates and greater capacity.
  Install it!

  Also 3G must be activated before you try to establish a 3 G connection.
  Please check if the 3G module has been activated correctly!

  Recommend checking this information page of Microsoft Mobile Broadband end-to-end
  http://Windows.Microsoft.com/en-us/Windows-8/mobile-broadband-from-start-to-finish

  You will find different troubleshooting tips.

  In the case where you have a signal but you can't connect the possible reasons could be:
  You don t have a valid data subscription.
  The name of the access point (APN), user name or password used for the connection is not valid.
  You're roaming and the selected network operator doesn't allow data services or you don t have roaming enabled for data services.

• Portege Z30 - B - 10 c: is THNSNJ256GMCU SSD supports hardware encryption

  I have a Toshiba Portege Z30 - B - 10 c with 256 GB SSD (exact model THNSNJ256GMCU).
  On the Internet I found weather mixed info, this drive takes in charge or no material encrytpion.

  Could someone help me find the answet to this question and, if it supports encryption.

  How to activate it?

  THNSNJ256GMCU

  Main features
  • Capacities up to 512 GB
  • Available in four Standard form factors
  • MLC NAND Flash memory
  • Low-power Devsleep feature support
  • The end-to-End data protection
  • Gravitational quadruple Code technology (reverse)

  More features
  • Translation mode which allows all disk configurations
  • Hot plug/OS-Aware removal
  Exclusive Toshiba • error correction technology, reverse (Quadruple gravitational Code Technology) support
  • Read only mode supported for emergency

  http://Toshiba.SEMICON-storage.com/e...t-SSD/Hg6.html

• Satellite vs Z30 Portege Z30

  From what I can tell (and confirmed to the Toshiba customer service) the Satellite Z30 is identical to the Portege Z30 except for the following differences:

  * The Portege Z30's Active Management Technology (AMT), which allows some administration remotely for enterprise environments
  * The Portege Z30 has a warranty of 3 years (1 year of the Satellite)
  * The Portege Z30 is pre-installed with Windows 7 and Windows 7 system restore partitions (and Windows media 8.1 provided) so that the Satellite comes pre-installed with Windows 8.1 system partitions and restore

  My question is if the roller on an image taken of installing Windows 7 from a Portege Z30 will transfer to Satellite Z30 machines? I suspect there will be no problems with the hardware, but I'm curious about Windows activation and if the SLP on Satellites key will match the Portege.

  Please be so kind and send feedback after your recovery image experience.

• Portege Z30-C-12Z cam does not work with Win 10

  Hello!
  I have a problem with my Portege Z30-C-12Z. Camera in win10 does not work.
  Error code: 0xA00F4273. Have tried all the following steps: http://answers.microsoft.com/en-us/w...0-71c220c123a9 and like many more check the BIOS etc.

  According to me, I tried and everything, checked it please help!

  Try this:
  Type of storage in the search window and go to the storage system settings page. Make sure that the economy sites point to existing folders.
  I moved the files on a SD card and the camera could not find the folder of photos. Also, I've seen the suggestion to check that the folder of photos contains the security settings to allow access.

  If still no good, remove the driver of the webcam from the Control Panel, then let Windows Update to install a driver for the webcam update.

  Reinstall the camera application can also help.

• Toshiba Portege Z30 - A - Accupoint does not work

  Hey there!

  I had a problem with the Accupoint, he moved alone, so I disabled it.
  But the problem is that I have also disabled the two buttons above the key.

  A is it possible to repair the Acupoint or disable without disabling the buttons?

  I have a Toshiba Portege Z30 - A with Windows 10

  Thank you!

  AccuPoint or Trackpoint

  

  I think it's a touchpad cable problem. Send in for repair.

• Portege Z30 - smart card reader does not work

  Hi, I just got my new Portege Z30 a few days ago.
  I try to use the card reader chip for my Spanish ID (DNIe) and seems to not work.
  When I insert the card as stated in the users manual, nothing happens.
  I have to player of SC "actuvate" somehow?

  (DNIe needs a compatible with ISO7816 SC reader, as one installed in my laptop seems to be)

  Usually you should not activate anything. Check the status of card reader in Device Manager please. There is everything OK?

  Make sure that you use a compatible card and it is inserted correctly.