11 7140 Pro event ID 256 DPTF meeting place

Similar Questions

• Absent express PCI into Dell 11 7140 pro 64 bit win 8.1 place

  I just bought this promising device of the internet store and try to get to know it better.

  When you run the Dell 'PC checkup' application with a "standard scan" I however received a cryptic message. He said that the test of the system is not succsessful due to "no PCI Express unit. I repeated the test after resoring the PC with files preserved and had the same result.

  Is it a material default and what can I do about it?

  I just got an update of software on the PC checkup app and now the problem seems to be resolved.

• 11 7140 pro meeting place cannot activate audio maxx

  Hello

  Got my 11 7140 pro with windows 10 place now. Really happy with the product so far, but I've noticed that I can't activate audio maxx on it. He came up with message 'Maxxaudio supports stereo output only. Please can someone help, because the current volume level is not enough at this point.

  Thank you

  Your system is upgraded from 8.1, or you perform a clean install of win 10?

  The reason why I ask is because I did a clean install, let Windows update capture some pilots he thinks he needs and MaxxAudio works very well.

  Have you tried to uninstall the drivers, reboot and reinstall the drivers?

• Keyboard problem trip 11 7140 Pro place

  Hello. I have a 11 7140 pro place and have recently added travel keyboard.

  I found a problem but I hope for more help with.

  When I plug the tablet on the keyboard the power LED flashes white once then 4 short orange blinks then repeats indefinitely. Check the power meter app also shows battery 2 as long as it does not exist.

  I can use the mouse and the keyboard, but nothing I do seems to help with the problem of flashing. When I connect the tablet to the AC charger with the connected keyboard the light just flashes orange. I tried also to separately load the keyboard using the adapter directly connected to its port micro-USB for about 6 hours and it made no difference.

  Any help on what could be the problem and means flashing is appreciated.

  Darren.

  OK, happy to say that I myself have resolved.

  I consulted my Bios 7140 and saw that Bios has recognized the two current batteries, even if the Windows OS 10 doesn't have. He showed both the Tablet battery & battery (i.e. mobile keyboard battery) charge. under the 23W power adapter. If the Bios recognizes clearly a second battery.

  I changed all the power & battery settings (for example of Adaptive load, power on the cover, etc.) that I could find to another value.

  I rebooted the unit and re-entered Bios together as all the settings back to what they were originally.

  Re-startup in Windows 10, now battery recognisees the two 7140 & the battery slice in the mobile keyboard. It's also fresh & uses two batteries.

  QED.

• Meeting place for Dell 8 Pro + Windows 10 + No Sound Drivers OK

  Does anyone else have a problem with their coming 8 Pro?  I have upgraded to Windows 10 and everything seemed fine, then a few days ago the sound has stopped working.  The sound icon had a red in the taskbar as if 'X' cut and I couldn't turn on the sound.  The scroll bar does not, even on the physical switches.

  I unloaded the driver and rebooted and it seemed to accept and had no errors in Device Manager (I tried both later and regressed to a previous version of the driver... no luck).  The slider bar has worked and it was reactivated without doubt.  I did a test in the sound setting menu, and he reported that he was unable to play.

  So I did a factory restore Dell Windows 8 and the sound is back.  So good, it was not a hardware problem.  But we have all found their fair will stop working on Windows 10 (worked great for a few months now)?  I don't have my heart set to level my meeting place for 8 to 10 Windows because everything I do on this machine is to surf the web, but I think it will be a possibility.

  This true isn´t at all. I found a workaround. I downloaded the Dell booth 8.1 Windows

  

  then I went to the Device Manager and clicked on both devices under "Audio - video - and Gamecontroller" the names of these two devices are 'Intel ESS Audio Device (WDM) and "IS2 Realtek Audio Codec".

  

  Do right click go to properties and chose to update the drivers

  

  Choose "desktop search".

  Choose "from the list.

  Choose "install device".

  

  

  Now search for Drivers for Win 8.1 in the cabin - you should probably remove it with software like 7zip

  '5830-win8.1-A06-KY92D.CAB\5830\win8.1\x86\chipset\PKVD4_A05-00\Drivers\Audio\ '.

  Here you can find the files INF. choose them, install it and restart your computer. Do the same for devices stand in Manager.

  After that, you can see two drivers if by clicking on choose in the list as in the screen above. Ensure that you have chosen the one of 22.11.2013.

  Now you should make it sound now, from time to time, it is necessary to reinstall the 2013, but it works fine for me now.

  In constance. His important force windows to use this old pilot, only try to install a new and chose that an older version causes windows always using the new driver for windows 10.

• Venue 11 7140 pro micro HDMI does not work after upgrade windows 10

  Has anyone tried connect a HDMI microphone on their place of dell 11 7140 pro after windows 10 upgrade? Mine does not work after the upgrade, but the HDMI from the dock works.

  I have thus display driver problems on 10 to win.

  For me, the micro HDMI port works fine. I use an active adapter, so that could make a difference.

  The HDMI on the dock works well, but only if I directly connect to an HDMI display. If I try to use a passive DVI adapter, then the external screen is not recognized. In addition, the DisplayPort on the wharf is also unnecessary, regardless of the type of cable or attached monitor.

  I encounter this problem after performing a new installation of Win 10, using the brand Dell drivers and latest drivers Intel installed by Windows update.

  It is certainly a driver problem Win 10 because everything works fine if I boot the Tablet under Linux using a USB key.

• Meeting place for DELL Pro 8 - option missing sleep after updated

  I own a DELL Pro 8 meeting place. After updating drivers, the tablet will not sleep and pressing the power button is no longer in the Tablet 'SLEEP' mode.  SLEEP option is completely missing the Tablet remains on constantly even when not used.

  The updates that I applied are

  Pilot series Intel Atom Z3000

  Running reliable engine Driver Intel

  5570 WWAN and GNSS (GPS) Driver Wireless Dell Mobile Broadband

  I've found a workaround.

  I found that disable driver Wirless 5570 Mobile broadband device Windows re-activates the SLEEP feature Manager.  This would indicate that the problem is with the driver 5570 Wireless.  I tried to downgrade to a previous version of this driver, but Mobile broadband will completely stop working.

  I suppose that others have the same problem, if you have not applied the latest updates and a meeting place for Dell Pro 8 with a card 3G it would be a good idea to not update drivers at this time.

  In the end, I updated the Windows operating system files and installed A03.  Could not get A04 or A05 works not at all.

  It is clear that these updates have not been tested on the site of Dell Pro 8.  I highly recommend to avoid updating the driver for the card 3G until an adjustment for the driver of the object is released.

  The reality is that Dell has released a product with a digital pen that does not work properly and use a 3G card that does not work properly.  In general I would avoid Dell Windows tablets in the future, if you do not have to use Windows 8.1 I would recommend that you buy an Apple iPad.

  The iPad is a fantastic table.

• Lost power 'high performance' profile on the meeting place 8 pro

  I only see the option 'Balanced '. I remember when I had first tablet, I had two options... one for balanced and another for performance.

  How can I return these options? At the very least, that someone can point out their profile for their meeting places 8 pro settings?

  Also, I see no popup 'low battery'... the tablet will shut down without any warning when the battery is low.
  Thanks in advance.

  That has something to do with the sleep settings connected / configuration Dell made on these units. It is the same for versions place 11 MS Pro. units of vPro are different because no standby connected supports.
  If you turn off the connected Eve all Windows power plans are displayed and all the advanced features of power are available.

  Use the command Regedit and change the following:
  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Power
  Change the value for the key CsEnabled from 1 to 0 and reboot.

  1 means connected off standby active and 0.
  Try it and see if it solves your problem.

  BTW: by disabling the connected standby battery also will show the time remaining not only the percentage of battery life. :-)

• How to get back to the old cat, without meeting places

  The new listing - for contacts - Hangouts appeared a few days ago. I had not asked her. How to get back the old cat and list of contacts?

  Sounds like a question for any site that turns "old cat and meeting places.

  If you tell us what Web site which is, maybe someone here knows and might be able to help.

• Malfunction A7000 camera in meeting places

  All using the outputs on the camera for a video fuzzy and uncertain in landscape (front and rear) with a yellow and Green Strip on top. But this only occurs when using the meeting places and that too in fashion landscape. The person at the other end comes to see this kind of blurry video on my phone I see no problem with my own video or video of the other person. Because Hangouts is system application in this phone, I can not uninstall it and reinstall to fix this.

  Free OTA update.

  Problem solved through Version S142 and above.

• Meeting place for Dell 8 3840 Applications keep crashing

  HI I had place Dell 8 3840 (new model) but I have a problem of application will crash everytime when I used.

  Specifically the Google Chrome browser, I just can't browse any Web site using the chrome browser. some site I opened there keeps crashing all the time. Several times I reset the Tablet, erase browsing data everything. But the problem could not be solved.

  Please help if you know how to solve the browser crashing the question on the meeting place 8 3840.

  Thank you

  I will never buy a new Dell product - firstly, technical support said that there is not only the amount of RAM (sharp) left after loading the OS, which means that if you have several tabs open in a browser, it will run out of memory. I found this point until after the use of the Tablet more than 30 days (49 to be exact) and when I tried to return, they said thanks for your efforts trying to solve this problem, but now that you're beyond the window of 30 days return, too bad - we can send you to the technical support. I tried to climb and they said the same thing - they don't care my or your company, or what is right.

  I / we never will only buy Dell products-our Organization eng and sales will go with someone else who is more concerned about the customer satisfaction.

• Hi, could you please answer question in terms of meeting place?

  Hi, I work in service of meeting place, I got very confused these 2 question:

  (1) in a real Conference senario, each audio stream of a participant must go to blade Audio (Media server) to mix. If so, then we have the conference voice gateway resource what is it for?  I mean no use voice gateway DSP farm set up a conference?

  (2) in version V7, each audio blade has 250 ports session (G711 audio codec only), and for example, we have 2 blades, then it means that all the participants of the meeting at the same time must be not more than 500?

  (3) the mode of operation of blade audiao, in a shared pool? or other self-locking?

  Thanks in advance!

  Hi Lin,

  Let me answer your questions:

  1. in version 7.x, you use the MCU hardware blades (Audio or video or both) for your audio/video conferences. When you schedule a meeting, this meeting is held on this MCU and you use resouces about this MCU depending on the type of meeting that you have planned (Audio or video or both).

  DSP resources are more for transcoding in this case and not for the Conference.

  2-1 port, 1 user (1 session audio) then Yes you can max 500 participants in a single conference.

  3. When you schedule a meeting you are reserving the resouces on your MCU so you are limited to what is available.

  HTH

  Arun

• Meeting place 8.0 - disable and reactivate the Participant in particular

  Hello

  I'm meeting place 8.0 Application Server (Express Media Server) installation and Web Server 8.0

  Problem is when presiding officer (host), who is planning a meeting, can't cut / activate the other participants (particularly) in the same session (Act as a moderator).

  Now, if we provide privilege assigned to the host, we get these rights to Mute and activate the microphone of this meeting and any other meetings running (which is a problem).

  Can we have a meeting of the President with Mute / Unmute access (particularly) for the meeting, which was hosted by him.

  Please provide some valuable contributions on the same.

  Thank you best regards &,.

  Ashish Bagla

  Hi Ashish,

  If you have the single MeetingPlace Audio, of the telephone user interface solution there is no possible way to mute individual participants. You, as the host, can cut only all participants, and then each participant can be reactivated if they mean something.

  The only other alternative is to use the Conference Manager. However, to be able to use this tool, the user/host must be either standard or system administrator user type.

  More on the conference manager you can find here:

  1. how to install the Manager of the Conference:

  http://docwiki.Cisco.com/wiki/Cisco_Unified_MeetingPlace_Release_8.0_--_Installing_MeetingPlace_Conference_Manager

  2. how to use the Conference Manager:

  http://docwiki.Cisco.com/wiki/Cisco_Unified_MeetingPlace_Release_8.0_--_Using_MeetingPlace_Conference_Manager

  I hope this will help.

  -Dejan

• Meeting place for Dell 11 I3 pro locks screen (7139/7130) towards the top/gels

  Hello

  I have a Dell location 11 Pro I3, it's almost awesome to work after getting all the latest drivers updates, Bios, etc..

  But from time to time, the screen freezes, it seems that it only freezes when im touching the screen or using the keyboard on this (compact keyboard with trackpad).

  A few times the screen freezes for a few seconds, other times I have to put to sleep (power button) and wake up again until the screen reacts.

  I know it is a problem of editing screen, the Tablet meets the keys, keyboard typing or the trackpad when the screen is frozen.

  How will I know it when I see the movements on the screen? I see when I wake the Tablet after a freeze of all the changes I made, for example typings, Web sites change. And the sounds when I get error sound when I arrive at the end of a page, etc. The sounds come while the screen is frozen.

  Anyone have any idea how I can solve the freezing of the screen that would be amazing :)

  I've seen other posts but non of them are recent (a month or two old)

  Thanks in advance :)

  On my tablet, this problem was more caused by the Panel Auto Refresh. Download Intel drivers from the support page and install it if you don't have it already done. Then, click Start-> all-> Intel HD Graphics Control Panel Apps. Click on 'Power', then click on "Off" next to Panel to refresh.

• Meeting place for Dell 8 Pro 5855 - delete the recovery partition?

  I just bought a place 8 Pro 5855. I did a recovery USB disk. I was wondering if there is a way to remove the recovery partition so that I can retrieve this internal storage space. I could try something like EaseUS or MiniTool, but I was wondering if there was another way that I wasn't aware of. Is there a reason why I should not delete the recovery partition? Thank you!

  This is how I did it:

  1. run Diskpart (from Run or CMD prompt), don't worry he'll ask the elevation to Admin

  2. type: select disk 0 (main SSD)

  3. type: list of partition (to see the available partitions)

  4. type: select the partition 6 (my recovery partition, yours may be different)

  5. type: delete partition replacement (deletes the partition 6)

  6. type: select partition 5 (my Windows, to the area to recover partition deleted)

  7. type: extend (retrieves the space)

  8. type: exit

  It worked for me on the DV8P 5830.