1240AG vs 1522 outdoor

Similar Questions

• Watch series 2 bike outdoor activities

  Does anyone know if/when auto pause will be added to the activity of cycling outdoors?  This is a key element which must be included and with the GPS should be easy to implement.  The watch knows whether you are moving or not.

  Thank you!

  -Dave

  Hello

  See: End, Pause or Lock > work with your Apple Watch - Apple Support

• Why Apple Watch cannot show the heart rate all implement open outdoor execution on?

  Why Apple Watch cannot show the heart rate all implement open outdoor execution on?

  Technical data has shown that he can do, but in fact can not?

  It is not good advertising. During the race I'm not for the convenience of drag any function. It is wet.

  This link should help you your heart rate. What it means, and where on Apple Watch you will find. -Apple Support

• Mac Book Pro, outdoor WiFi antennas work to extend wi - fi range when plugged into USB PORTS

  Outdoor WIFI antennas work if plugged into the USB port on the Mac Book Pro. If they do, those who extend range of transmission and reception wi - fi?

  Sorry, but I've never used an external USB wifi antenna but if you describe your use case a wifi Repeater/Extender can be a good option for you. https://www.repeaterstore.com/pages/WiFi-booster-Repeater-Extender-differences

  If the option is not a Repeater/Extender so will have to wait for someone who has used an external USB antenna down to.

• I have a question please. Are the activation of wifi, Bluetooth and 3G while I'm outdoor consume the battery of my iPhone (6 s) and reduce its life expectancy?

  I have a question please. Are the activation of wifi, Bluetooth and 3G while I'm outdoor consume the battery of my iPhone (6 s) and reduce its life expectancy?

  If you want your Apple Watch to stay connected to the phone, you need to keep compatible BlueTooth.

  All functions of the phone will use up the battery life. Some things more than others. Screen brightness, low cell signal strength and location services are major culprits. If you are having battery problems, see this article:

  http://www.scottyloveless.com/blog/2014/the-ultimate-guide-to-solving-iOS-batter y-drain

  I don't know what it means being out of doors has to do with the question.

• How could a routine walk-run? Inside, Indoor walk or another run? I do this routine outdoors with Gps first so that I'm not kidding my calibration data? Help please and thank you!

  How could a routine walk-run? Inside, Indoor walk or another run? I do this routine outdoors with Gps first so that I'm not kidding my calibration data? Help please and thank you!

  Hello

  Choose indoor walk or run Indoor (it does not matter which) to an indoor walk-run routine.

  Even if Apple Watch does not currently offer as a workout interval training, choose one of these allows the most appropriate data sources (which are the same for market and short) to use to track your training.

  If walking or running, the accelerometer is used to estimate pace and the distance (allow your arms swinging naturally) as well as the frequency heart sensor for the estimation of calories burned.

  Run or walk inside will not affect your calibration data. Calibration is based on the GPS of the iPhone data and is only held during the outdoor walking training or race outdoors when the iPhone combined is taken along.

  More information:

  Use of the workout on your Apple Watch - Apple Support

  Calibrate your Apple Watch for better accuracy of training and activity - Apple Support

• best settings for shooting outdoors? Canon rebel eos t3i

  my brother is getting married this Saturday the 15, it'll be a wedding in the open air at 4 pm Pacific time. The weather is sunny highs of 74 depressions 55 with a chance of flurries. What are the best GENERAL setting to record the ceremony? I am a newbie of camera so I don't know squat! any help would be greatly appreciated.

  Outside "Sun", I would like to use a flash.  The difference in the sunny vs parts of a shadow of your subjects will be extreme in the middle of the day sun, but the use of the flash ("fill-in flash") so that the outside is a great way to improve the appearance of a sudden.

  "Program" mode on the mode selector switch.

  Lift the pop-up flash (the small button near the mode dial with lightning bolt symbol unlock the catch hook and triggers the flash.)

  Note that when you look through the viewfinder to take a picture, there is some information on the background... which most is information on the exhibition.  But on the left side, you will see a little lightning icon.  If you see this icon, it means that the camera will use flash when you take the picture.

  In the basic modes, you have little control over when the camera will use the flash (it's automatic), but in the modes "creative zone" (program, Tv, Av and M), you have full control and can force the camera to use flash.    HOWEVER, using "program" mode is the same as the fully automatic mode (green box) * except * that you can replace several things that you can not override when using fully automatic.

  It would be much better if you had an external (for example like the Canon 430EX II) speedlite because the built-in pop-up flash is very limited (subjects must be ready for that flash have much effect).

  When I shoot outdoors (I also turns a wedding tomorrow), I put a feature called "Flash Exposure Compensation" to "-1".»  You can find instructions on this page 102 of your instruction manual (not the 'basic instructions manual"... the full version of the instruction manual for your camera.)  "Flash exposure corrections" asks the camera to determine how much it needs power flash (which is what it normally does), but then adjust the amount of energy upwards or downwards according to the level of "compensation" that you set.  The reason why I have dial down is that I don't want my pictures to have the look of people generally associated with photography flash... I want to still of the Sun to be the main source of light... and I want the flash to fill in deep shadow (located still have shadows... but they are going to be weak shadows instead of strong shadows).  This allows to improve lighting.

  When you go inside, you want to disable "flash exposure compensation" feature by assigning to '0' (zero, does not change the amount of flash - regardless of the camera wants to do).

• HP Laserjet M 1522

  Hello. I recently bought the HP Laserjet M 1522 fax machine and installed instead of after model of Canon. And with this new HP machine there are sometimes problems in sendinf and receiving faxes on specific numbers, but there is always possibility to send faxes on the other numbers. It happens from time to time, on a regular basis. Sometimes it works (send and receive) very well with all the numbers, sometimes it doesn't. In addition, there is no such problems with gun previose machine. Could someone help me explane this problem. where shoul I look at to troubleshoot it - is it phone type line of trouble or something with the fax machine?

  First check that your firmware is the last (otherwise please download the latest version of www.hp.com).

  Make sure that you use the unit on an analog direct line, as this product is designed specifically for use with traditional analog telephone services.

  As your number of fax produced intermittently for some numbers, it could be due to the quality of the phone line. You can try to adjust the speed of fax (for lower speed), or disable ECM (in the menu in the control panel) in the case of performance of fax under the environment of impaired telephone line.

• WVC 2300 outdoor pregnant

  Hi all

  IM interested to buy 1-2 WVC 2300 cameras placed outdoors for a perimeter of the House investigation. Can someone tell me what attachments can I use?  I read the card speak Pelco, but Im not sure what model of Pelco adapts the WVC2300. Also is there another brand. For example how on the D - Link DCS 60?

  Thank you

  You can get limited coverage wireless there boxes specially designed for wireless cameras, but they are very expensive. If you put the camera in an outdoor enclosure regularly your wireless range can decrease.

• Why can't I choose a specific program to get outdoors with the file.

  I save my first projects pro adobe in a folder called projects.  I use to be able to open the file, click on a project and it would open in first pro.  Now, for some reason any the only program I try to open the project with is photoshop.  It will not open a project first pro.  I clicked on open with and chose the first pro to open project files, but the computer won't let me choose first pro.  He just kept photoshop outdoor with the file.

  ... but the computer won't let me choose first pro.  He just kept photoshop outdoor with the file.

  Please provide details...

  is first Pro in the list to open it with?

  If it is not on the list, use this tutorial to add it to the list:

  http://www.Vistax64.com/tutorials/126340-open-add-program.html

• Can WRT610N & DAP-1522 'speak '?

  Hello. I can't get these two 'together' with WPS (or manually). I have the latest FW. Is this possible and if so, how? I really want to continue with cable :-(.

  Cheers, DOM.

  I think it should work. DAP-5122 has a default IP: 192.168.0.5 as well as the IP address of the router Linksys is: 192.168.1.1. So do your job to DAP-5122 with your Linksys router, you need to change the IP LAN of the DAP-5122 192.168.1.5 and your DAP-5122 will communicate with your Linksys router.

  Wire the DAP-1522 to the computer, assign a static IP address to the computer and connect to the DAP-1522 GUI and change of address LAN IP 192.168.1.5 and save the settings.

• X230T: Display Type: 12.5 Multitouch HD or HD Outdoor 12.5

  Hi guys,.

  I just placed an order for a X230T with a screen HD Outdoor 12.5.

  I did a bit of research before making my choice. I didn't know that external HD display was touch sensitive, however, you do not get the features "Multitouch" and it's a lot less sentsitive Multitouch screen.

  However, I just watch this video:

  http://www.YouTube.com/watch?v=vLNlSONqX_0

  Something he said was something like "it's available with and without the touch sensitive. Surely, it means "with or without the multi-touch" display as I don't see the option for a sensitive touchscreen display.

  I would guess, since the HD Outdoor 12.5 screen seems to be an "optional upgrade" when you order directly from Lenovo, this screen is always touch sensitive?

  What is the difference between the HD Multitouch 12.5 and 12.5 types of HD display outdoors?

  Can anyone helpe me here?

  Multitouch = wacom pen + touch to the finger

  Outdoor pen wacom only =

• NEMA OUTDOOR FOR CISCO AP 3702

  Hello!

  One of my clients want to settle and NEMA (enclosure) for cisco AP 3702 OUTDOOR, but I can´t find the part number to order it!

  Can someone tell me if there is a reference number? I found http://www.terra-wave.com/cisco-3702e/http :// www.terra-wave.com/cisco-37...

  but obviously not cisco.

  So I guess the question is: cisco cell of this Articles? If yes where can I find part numbers?

  Thanks in advance

  You're right, Cisco does not. In this document, they recommend one of the following providers:

  http://www.Cisco.com/c/en/us/TD/docs/wireless/technology/apdeploy/8-0/Cisco_Aironet_3700AP.html

  Third-party sources for the envelopes of NEMA type include:

  www.oberonwireless.com

  www.sparcotech.com

  www.Terra-Wave.com

• Aironet 1240AG - cannot use the web interface

  I'm trying to set up a new Aironet 1240AG. After that she won an IP from the DHCP in my LAN, I can always connect using the web interface. I use an Internet Explorer 6.0 on Win 2000. It keeps telling me cannot find the server. Please I need help

  Hi Olivier,.

  First off you're welcome :) This method really works without the need for a WLC, be patient. Check the address static IP put you on your TFTP (* range 10.0.0.2 to 10.0.0.30)

  Rename the access point image file in the folder of the server TFTP c1200-k9w7 - tar.default for a series of 1200 access point

  Looks like a problem TFTP (no firewall on your PC?)

  Take a look at the details in the following threads that each has to do with TFTP. There are some great tips to troubleshoot TFTP some of my NetPros favorite ScottMac, Cisco's Stephen and Jack Young. The likely culprit may be you need to uncheck "Hide extensions for known file types" on your server TFTP;

  http://forum.cisco.com/eforum/servlet/NetProf?page=netprof&forum=Wireless%20-%20Mobility&topic=WLAN%20Radio%20Standards&CommCmd=MB%3Fcmd%3Dpass_through%26location%3Doutline%40%5E1%40%40.1ddc042b/8#selected_message

  http://Forum.Cisco.com/eForum/servlet/NetProf?page=NetProf&Forum=Wireless%20-%20Mobility&topic=General&CommCmd=MB%3Fcmd%3Dpass_through%26location%3Doutline%40%5E1%40%40.1ddc03c4/2#selected_message

  http://Forum.Cisco.com/eForum/servlet/NetProf?page=NetProf&Forum=Wireless%20-%20Mobility&topic=General&CommCmd=MB%3Fcmd%3Dpass_through%26location%3Doutline%40%5E1%40%40.1ddbf271

  I hope this helps! Good luck!

  Rob

  Remember messages useful rate...

• VPN site to site & outdoor on ASA 5520 VPN client

  Hi, I'm jonathan rivero.

  I have an ASA 5520 Version 8.0 (2), I configured the site-to-site VPN and works very well, in the other device, I configured the VPN Client for remote users and works very well, but I try to cofigure 2 VPNs on ASA 5520 on the same outside interface and I have the line "outside_map interface card crypto outdoors (for VPN client). , but when I set up the "crypto map VPNL2L outside interface, it replaces the command', and so I can have only a single connection.

  the executed show.

  ASA1 (config) # sh run

  : Saved

  :

  ASA Version 8.0 (2)

  !

  hostname ASA1

  activate 7esAUjZmKQSFDCZX encrypted password

  names of

  !

  interface Ethernet0/0

  nameif inside

  security-level 100

  address 172.16.3.2 IP 255.255.255.0

  !

  interface Ethernet0/1

  nameif outside

  security-level 0

  IP 200.20.20.1 255.255.255.0

  !

  interface Ethernet0/1.1

  VLAN 1

  nameif outside1

  security-level 0

  no ip address

  !

  interface Ethernet0/2

  Shutdown

  No nameif

  no level of security

  no ip address

  !

  interface Ethernet0/3

  Shutdown

  No nameif

  no level of security

  no ip address

  !

  interface Ethernet0/4

  Shutdown

  No nameif

  no level of security

  no ip address

  !

  interface Ethernet0/5

  Shutdown

  No nameif

  no level of security

  no ip address

  !

  2KFQnbNIdI.2KYOU encrypted passwd

  passive FTP mode

  object-group, net-LAN

  object-network 172.16.0.0 255.255.255.0

  object-network 172.16.1.0 255.255.255.0

  object-network 172.16.2.0 255.255.255.0

  object-network 172.16.3.0 255.255.255.0

  object-group, NET / remote

  object-network 172.16.100.0 255.255.255.0

  object-network 172.16.101.0 255.255.255.0

  object-network 172.16.102.0 255.255.255.0

  object-network 172.16.103.0 255.255.255.0

  object-group network net-poolvpn

  object-network 192.168.11.0 255.255.255.0

  access list outside nat extended permit ip net local group object all

  access-list extended sheep allowed ip local object-group net object-group net / remote

  access-list extended sheep allowed ip local object-group net net poolvpn object-group

  access-list splittun-vpngroup1 extended permitted ip local object-group net net poolvpn object-group

  pager lines 24

  Within 1500 MTU

  Outside 1500 MTU

  outside1 MTU 1500

  IP local pool ippool 192.168.11.1 - 192.168.11.100 mask 255.255.255.0

  no failover

  ICMP unreachable rate-limit 100 burst-size 10

  don't allow no asdm history

  ARP timeout 14400

  Global 1 interface (outside)

  NAT (inside) 0 access-list sheep

  NAT (inside) 1 access list outside nat

  Route outside 0.0.0.0 0.0.0.0 200.20.20.1 1

  Route inside 172.16.0.0 255.255.255.0 172.16.3.2 1

  Route inside 172.16.1.0 255.255.255.0 172.16.3.2 1

  Route inside 172.16.2.0 255.255.255.0 172.16.3.2 1

  Timeout xlate 03:00

  Timeout conn 01:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02

  Sunrpc timeout 0:10:00 h323 0:05:00 h225 mgcp from 01:00 0:05:00 mgcp-pat 0:05:00

  Sip timeout 0:30:00 sip_media 0:02:00 prompt Protocol sip-0: 03:00 sip - disconnect 0:02:00

  Timeout, uauth 0:05:00 absolute

  dynamic-access-policy-registration DfltAccessPolicy

  the ssh LOCAL console AAA authentication

  No snmp server location

  No snmp Server contact

  Server enable SNMP traps snmp authentication linkup, linkdown cold start

  Crypto ipsec transform-set ESP-3DES-MD5-esp-3des esp-md5-hmac

  Crypto ipsec transform-set esp-SHA-ESP-3DES-3des esp-sha-hmac

  86400 seconds, duration of life crypto ipsec security association

  Crypto ipsec kilobytes of life security-association 400000

  Crypto-map dynamic outside_dyn_map 20 the value transform-set ESP-3DES-SHA

  card crypto VPNL2L 1 match for sheep

  card crypto VPNL2L 1 set peer 200.30.30.1

  VPNL2L 1 transform-set ESP-3DES-MD5 crypto card game

  map outside_map 65535-isakmp ipsec crypto dynamic outside_dyn_map

  outside_map interface card crypto outside

  crypto isakmp identity address

  crypto ISAKMP allow outside

  crypto ISAKMP policy 20

  preshared authentication

  3des encryption

  md5 hash

  Group 2

  life 86400

  crypto ISAKMP policy 30

  preshared authentication

  aes-256 encryption

  sha hash

  Group 2

  life 86400

  crypto ISAKMP policy 65535

  preshared authentication

  3des encryption

  sha hash

  Group 2

  life 86400

  Telnet timeout 5

  SSH timeout 5

  Console timeout 0

  a basic threat threat detection

  Statistics-list of access threat detection

  !

  !

  internal vpngroup1 group policy

  attributes of the strategy of group vpngroup1

  banner value +++ welcome to Cisco Systems 7.0. +++

  value of 192.168.0.1 DNS server 192.168.1.1

  Split-tunnel-policy tunnelspecified

  Split-tunnel-network-list value splittun-vpngroup1

  value by default-ad domain - domain.local

  Split-dns value ad - domain.local

  the address value ippool pools

  username password asa1 VRTlLlJ48/PoDKjS encrypted privilege 15

  tunnel-group 200.30.30.1 type ipsec-l2l

  IPSec-attributes tunnel-group 200.30.30.1

  pre-shared-key *.

  type tunnel-group vpngroup1 remote access

  tunnel-group vpngroup1 General-attributes

  ippool address pool

  Group Policy - by default-vpngroup1

  vpngroup1 group of tunnel ipsec-attributes

  pre-shared-key *.

  context of prompt hostname

  Cryptochecksum:00000000000000000000000000000000

  : end

  ASA2 (config) #sh run

  Crypto ipsec transform-set ESP-3DES-MD5-esp-3des esp-md5-hmac
  86400 seconds, duration of life crypto ipsec security association
  Crypto ipsec kilobytes of life security-association 400000
  card crypto VPNL2L 1 match for sheep
  card crypto VPNL2L 1 set peer 200.30.30.1
  VPNL2L 1 transform-set ESP-3DES-MD5 crypto card game
  VPNL2L interface card crypto outside
  crypto isakmp identity address
  crypto ISAKMP allow outside
  crypto ISAKMP policy 20
  preshared authentication
  3des encryption
  md5 hash
  Group 2
  life 86400

  tunnel-group 200.30.30.1 type ipsec-l2l
  IPSec-attributes tunnel-group 200.30.30.1
  pre-shared key cisco

  my topology:

  

  I try with the following links, but did not work

  http://www.Cisco.com/en/us/products/ps6120/products_configuration_example09186a0080912cfd.shtml

  http://www.Cisco.com/en/us/products/ps6120/products_tech_note09186a00807e0aca.shtml

  Best regards...

  "" I thing both the force of the SAA with the new road outside, why is that? ".

  without the road ASA pushes traffic inward, by default.

  In any case, this must have been a learning experience.

  Hopefully, this has been no help.

  Please rate, all the helful post.

  Thank you

  Rizwan Muhammed.