20 minutes to connect to the network anywhere

Similar Questions

• My system takes about 7 to 10 minutes to connect to the network.

  automatic configuration of IP address that does not exsist

  I know that this problem occurred to many users. for now I am connected to internet through cox. Lately when I turn on my computer I do not connect to the internet immediately a message first said "unidentified network" "local access only" then about 7 to 10 minutes later, he will say "connection cox 1" (which I call my connection) "local and internet" I think I've done the basics like resetting my modem, by restarting running without my security software (Mcafee) uninstall and reinstall mcafee. My vista firewall is disabled, defender of windows protected mode off the coast. running without Add - ons, by eliminating some startup programs defragment my disk, clean junk files, auto fix and defrag regitsry. I had a wireless router hooked up to the modem up to a month but I'm now connected directly to the modem. I noticed that my config auto to ipv4 is always showing the wireless ip address. any ideas?

  Original title: auto config to address that does not exsist

  Hello

  1. are you able to connect to the Internet using the wired Internet connection?

  2. using dynamic or static IP address?

  I suggest you read the following article and try the steps.

  un) Wired and wireless in Windows network connection problems

  http://Windows.Microsoft.com/en-us/Windows/help/wired-and-wireless-network-connection-problems-in-Windows

   

  b) change TCP/IP settings

  http://Windows.Microsoft.com/en-us/Windows7/change-TCP-IP-settings

  Reference:

  Setting up a network home

  http://Windows.Microsoft.com/en-us/Windows-Vista/setting-up-a-home-network

  I hope this helps.

• LaserJet Pro M201nw: M201nw LaserJet Pro no longer meets the ePrint requests, a few minutes after connecting to the network

  I've just implemented a new M201nw of the LaserJet Pro and it works fine, except for a problem with the printer with ePrint.

  I could implement Web Services on the printer and add it to as an ePrint, connected HP printer. Thanks to ePrint and Google Cloud Print printing for a few minutes after you have turned on the printer.

  But after a while, that can last from 3 to 10 minutes, the printer appears as "offline" in connected HP. If I check the settings ePrint to the printer through the front LCD or the web interface, for "ePrint Server Status", one of two things happening: sometimes there's just busy, or after a few seconds, I see "connection error. Check the Internet connection. »

  When I see the error message, I ask 'Tour ePrint temporarily turned off.' The printer will reconnect ePrint and work for a few minutes again.

  Local networking features of the printer such as network printing and web interface do not seem to have any problems.

  I don't think that the problem is related to my internet connection, which is reliable. I can monitor the traffic on my network and see communication between servers, XMPP from HP ePrint and the printer when the printer is working normally. When the printer has this problem, I still see the traffic coming in from HP but no traffic coming out of the printer. It's very strange and suggests part of the firmware of the printer does not work properly.

  Anyone else had problems with this printer model?

  Finally, I have determined the cause of the problem. While doing a follow-up, I discovered a router not authorized on the network itself advertising via the Protocol RIP (Routing Information) emissions. It seems that his presence finally confused the printer to know where to send the traffic. After turning off the emissions from the router, the ePrint feature, now works well.

• I am not able to connect to the main wifi network but can connect to the network of comments.

  Hello

  This is something new, I am facing to where I am not able to connect to a main network of airport extreme, but can connect to the network of comments. Guest network works perfectly fine while the main network does not connect to devices in the home. I also found that none of my base stations are visible in the airport utility (I Airpot extreme and Airport Express on the same network). Help, please.

  The first step in troubleshooting with this type of problem is to perform a complete network power cycle on your network. If you decide to do...

  Power off all the devices on your network... modem, routers, computers, printers, etc... in any order you want.

  Wait a minute

  Turn on the modem first and leave a few minutes, he managed by itself

  Turn on the next device that is connected to a modem and leaves turn a good minute

  Keep turn on devices one by one at a time, one minute apart, until the entire network is back

  Recheck the network and report on your results

• HP ENVY 15-k163cl: HP ENVY 15 updated to Windows 10, now unable to connect to the network

  I've recently updated to Windows 10 with my laptop (from Windows 8) and remember, Windows 8 was working fine but now that I've updated for Windows 10, I can't connect to my home network.
  
  When I turn on my laptop, it is not automatically connect to my network and when I try to connect from the network settings, I get an error "Could not connect to this network" and I have to wait at least 30 minutes before it automatically logs. After waiting that it works, but my laptop goes to sleep or goes inactive for awhile, it disconnects again and I have to wait
  
  I connected via hotspot and it worked fine, but all of my other computers laptops HP connects very well and they are 10 Windows as well. Only this laptop is upward, so I guess it's a problem with a new driver.

  Hello:

  The only suggestion I can offer would be to install the latest driver for the Intel Dual Band Wireless-AC 3160 adapter - 802.11 and see if that helps any.

  The 2nd driver on the list is W10 x 64.

  https://Downloadcenter.Intel.com/download/25513/Intel-PROSet-Wireless-software-for-Windows-10

• HP Color LaserJet M277n MFP: HP Color LaserJet MFP M277n CONNECTED to THE NETWORK, SHOWS NO INTERNET CONNECTION

  HP Color LaserJet M277n MFP printer, is connected to the network and I am able to print and scan. During the attempt to get the HP Web Enable services in the Web services configuration page, it displays an error: "connection error, check the internet connection".

  After you enter the IP address of the printer in the browser, I am able to detect the printer. To enable printing of HP, but unable to do so finds out the above error. Tried a lot of things including re editing of. When I check the printer, it shows the proxy settings are required / incorrect, where, as confirmed by the supplier that they use the proxy server.

  Help, please.

  Hello @JljoThomas!

  Thanks for posting and welcome to the Forums of HP!

  I understand that you have a problem of activation of the functionality of web services on your MFP HP LaserJet Pro M277n. I'd love to help you with this.

  First of all, you have the printer connected directly to a wall outlet or is a surge protector or power bar? Even if you have used a surge protector/power bar this whole time and you feel that this is not the case, please connect to a wall outlet so that we can eliminate the source of energy as the primary cause. Issues when connected to an uninterruptible power supply/Strip/surge protector power
  In this document you will see, QUESTION: questions or problems may arise when a HP LaserJet printer is connected to a UPS (UPS), a power strip or a surge protector
  ↑ This is not limited to the Laserjet printers.

  If this does not resolve the issue, we are going to let the router and unplug the power cable (NOTE: do not reset the router...), then do the same with the printer and shut down the computer. After a minute, plug in the router, wait to fully turn on, then plug the printer back in and wait for the wireless light become solid. Once the router and the printer are on, go ahead and re - turn on the computer. This will refresh the network connection.

  If you are still unable to connect to web services after trying these steps, we can try to set a manual DNS server of your printer to connect to.

  On the front panel of the printer, press the wireless icon. Select it wireless TO get the wireless summary. Do not your IP address.

  1. on your computer, open a Web browser and enter the IP address of the printer in the address bar. This will bring up the embedded Web server (EWS) page.

  2. at the top of the page, select Networking.

  3. in the left side, select Identification network.

  4. in article for DNS, under primary (IPv4) enter 8.8.8.8, under secondary (IPv4) enter 8.8.4.4.

  5. Select Apply at the bottom of the screen.

  6. try to activate the web services again.

  If it is still unable to connect, try to enter 209.244.0.3 for the primary (IPv4) and 209.244.0.4 for secondary (IPv4)

  Hope this helps!

  

• Computer connects to the network wireless as "local only".

  I am running Vista Home Premium SP2 on a HP Pavilion laptop.  I've never had any problems to connect this machine to a wireless network before, in hotels, at home, or anywhere.  My current home network is a modem - cable-> wireless-> wireless netgear n300 router.  My laptop connects to the internet via the modem cable directly or a wire from the netgear router.  I have a second, almost cell identical (it's intel, while the one who does not is AMD) which connects to the network wireless without any problem.  Two iphones connected wirelessely without any problem.  My HP laptop is the only one who refuses to connect to the internet.  Connected to the wireless network, it has access "local only".

  I tried the solution in this article: http://support.microsoft.com/kb/928233

  The question does not seem to receive an ip address, the computer receives an ip address.  I have disabled the IP v6, ran the norton removal tool, because I only had to a point and tried all other suggestions in these discussions: http://social.answers.microsoft.com/Forums/en-US/vistanetworking/thread/0949042d-074e-43ab-ba95-3c06cc2aa6be and http://social.answers.microsoft.com/Forums/en-US/vistanetworking/thread/bc08f0e7-49a9-4458-9e0e-149b2df362ec.  I've uninstalled and reinstalled the adapter and all TCP/IP and network protocols associated with it.  I am at a loss and would welcome any ideas.

  Here is the result of the command ipconfig / all:

  Windows IP configuration

  Name of the host...: Arrakis

  Primary Dns suffix...:

  Node... type: broadcast

  Active... IP routing: No.

  Active... proxy WINS: No.

  Wireless network connection Wireless LAN adapter:

  The connection-specific DNS suffix. :

  ... Description: Atheros AR5007 802. 11 b / g WiFi adapt

  Physical address.... : 00-1E-4C-B2-32-BC

  DHCP active...: Yes

  Autoconfiguration enabled...: Yes

  IPv4 address: 192.168.1.5 (Preferred)

  ... Subnet mask: 255.255.255.0.

  Lease obtained...: Wednesday, 28 April 2010 21:40:55

  End of the lease...: Thursday, April 29, 2010 21:40:55

  ... Default gateway. : 192.168.1.1.

  DHCP server...: 192.168.1.1.

  DNS servers...: 192.168.1.1.

  NetBIOS over TCP/IP...: enabled

  Ethernet connection to the Local network card:

  State of the media...: Media disconnected

  The connection-specific DNS suffix. :

  ... Description: NVIDIA nForce Networking Controller

  Physical address.... : 00-1B-24-FA-DA-80

  DHCP active...: Yes

  Autoconfiguration enabled...: Yes

  Card tunnel Local Area Connection * 10:

  State of the media...: Media disconnected

  The connection-specific DNS suffix. :

  ... Description: isatap. {31C080CE-FE0B-4D50-B734-C782C9A25FBC}

  Physical address.... : 00-00-00-00-00-00-00-E0

  DHCP active...: No.

  Autoconfiguration enabled...: Yes

  Card tunnel Local Area Connection * 6:

  State of the media...: Media disconnected

  The connection-specific DNS suffix. :

  ... Description: isatap. {B198B0D3-B70A-4E3E-858D-9774C414EECD}

  Physical address.... : 00-00-00-00-00-00-00-E0

  DHCP active...: No.

  Autoconfiguration enabled...: Yes

  Card tunnel Local Area Connection * 14:

  State of the media...: Media disconnected

  The connection-specific DNS suffix. :

  ... Description: Teredo Tunneling Pseudo-Interface

  Physical address.... : 02-00-54-55-4E-01

  DHCP active...: No.

  Autoconfiguration enabled...: Yes

  Card tunnel Local Area Connection * 11:

  State of the media...: Media disconnected

  The connection-specific DNS suffix. :

  ... Description: Card 6TO4

  Physical address.... : 00-00-00-00-00-00-00-E0

  DHCP active...: No.

  Autoconfiguration enabled...: Yes

  If anyone has this problem, it has been resolved by rolling the security settings on the router WEP.  I got the answer from the support client netgear.

  Amazing how two iphones, another laptop with XP and a laptop running Ubuntu Linux all about them without any problem, but wouldn't connect Vista laptop.

• My UK 6s iPhone does not connect to the network in Germany?

  My UK 6s iPhone does not connect to the network in Germany?

  'The network '? Which network? WiFi or cell phone? And what have you already tried to get connected?

• Hello my iPhone 6plus does not connect to the network on the upper left side of the screen it ust say research

  Hello my iphone 6plus does not connect with the network on the upper left side of the screen it say research

  Have you ever tried troubleshooting mentioned in this article?

  If you cannot connect to a cellular network or cellular data - Apple Support

• My laptop, connect to the network, but not the internet!

  My laptop connects to the network media blank but not internet. My roommates using the network can connect to the internet. I tried various things but not vain. I also tried to get in touch with the Virgin on this subject, but they can help. Is it my laptop and is there something special I need to do with a computer hp laptop. Help, please! Thank you!

  Hello

  On the Start Menu, click programs principally made, click Accessories, right-click on command prompt and select "Run as Administrator".  In the prompt, type the following commands, pressing on enter after each command.  Include spaces in the commands, as indicated.

  ipconfig/flushdns

  nbtstat-r

  nbtstat - RR

  netsh int ip reset c:\resetlog.txt

  netsh winsock reset

  Type exit and press ENTER.  Restart the PC and see if you can log in now.

  Kind regards

  DP - K

• Satellite L40: Windows Vista unable to connect to the network

  My Satellite L40 laptop was connecting to my network wireless perfectly since Christmas. But two days ago, it stopped! I can see the networks available on the laptop but when I try to connect I get the message "Windows cannot connect to the network. Following the link to "Diagnose the problem" has no useful effect.
  I installed Windows Vista Service Pack 1 yesterday to try to solve the problem, but always without success.

  Any advice would be appreciated.

  Select this option.

  Hello

  Please go to the drivers Toshiba download page and download the latest Wlan driver for your wireless card installed, then remove the old driver and install a new one. It should work.

  Otherwise, you should try to recover your entire system and replace the drivers installed by some more recent...

  Welcome them

• OfficeJet Pro 6830 hangs when it is connected to the network

  I just pick up a Pro OfficeJet 6830. I installed the ink cartridges and it seems to be able to print copies and test pages, but I can't seem to connect to my network. Here is what I tried:

  Using the Wireless Setup Wizard

  I selected my network in the list and entered my WPA key. It says it tries to connect, then the following occurs:

  1 briefly press (for less than one second), a screen will appear showing that it has successfully connected to the network.

  2. Press briefly (for less than a second) the screen flashes blue with an icon of 'power' and 'B8B2A4F8' text (which I assume is an error code).

  3. the screen display changes to "printer error: there is a problem with the printer.» "Turn the printer off, then on.

  4. after restarting the printer, he complains that he has not been arrested properly.

  Any other attempt to connect gives the same results.

  Ethernet connection

  If I turn on the printer when connected via Ethernet cable to my network, after about 10 seconds it crashes as described above (steps 2 and 3) without doing me anything at all.

  I also tried a "Hard Reset" (i.e. unplug the printer for 60 seconds, and then it turning it back on again). This made no difference whatsoever.

  I managed to get it to connect to a WiFi hotspot on my laptop (and I checked the firmware updates, but unfortunately there is none available), it seems that there is something of my network that do not have the printer. I have no idea what this could be, however. Someone at - it ideas?

  It solved!

  I spent a bit of time on the phone with HP tech support and the guy could not actually solve the problem for me but it helped prove that the hardware network printer works OK. I could connect the printer directly to my PC via Ethernet, then ping and access the built-in web server.

  It occurred to me that perhaps the problem was related to DHCP, because the printer broke immediately after the connection to the network. My router is an Asus RT-N66u with custom firmware (version Asuswrt-Merlin 376.48_3) and I could see the router newspaper that he was sending a DHCP acknowledgement to the printer just before he died.

  So, here is what I did to solve the problem:

  1 turn off the DHCP server on the router.

  2. on the printer, operated the network icon on the homescreen (at the Middle bottom) wireless.

  3 typed down "gear" icon to the left (settings).

  4 typed "wireless settings".

  5 typed "Assistant wireless configuration".

  6 selected my wireless network and entered the WPA key. This time, no crash, but he did not get an IP address assigned (obviously).

  7. back in 'Wireless Settings', I typed in 'advanced settings '.

  8 typed 'IP Settings'.

  9. tapped "manual (static).

  10. enter in the details for my network - yours will probably be different, but I entered in what follows:

  IP address: 192.168.002.201 (I chose this because it is outside the range of addresses, the router for DHCP problems).

  Subnet mask: 255.255.255.0

  Default gateway: 192.168.002.001

  DNS address: 192.168.002.001

  11 hit 'apply '.

  12 re-enabled the DHCP server on my router.

  And now it works!

• Dynadock U3.0 - unable to connect to the network

  I have a U3.0 Dynadock and when you try to connect to the network at work via a network cable, the parameters were not detected automatically.
  I then put manual details (IP), but this did not fix the problem.

  I assigned by DHCP the Dynadock should get a certain IP address.
  I still have a problem.

  In addition, when left on DHCP, subnet mask is 255.255.0.0 which is weird.

  Has anyone else had trouble linking their Dynadock to their network?

  I use a laptop another progress, running Windows 7, 64 bit.

  I found a solution.

  update to the latest version of the software available at toshiba for the dynadock solves this problem.

  software provided with the hardware is V6.1

  to solve the problem, it is necessary to download the toshiba support website V6.2.

  Also note, that windows 7 doesn't automatically recognize that this software update is available.

• Unable to connect to the network and network adapter is not detected

  Hello, this is the first time I use a laptop ( HP Pavilion 2332se g6 ) and I installed Windows 7 Ultimate 64 bit. I cannot connect to the network (wired or wireless) and cannot connect to Wi - Fi.

  My problem is perhaps the same problem in this post in your forum, so I provide the same information. If it's not the same problem, ask the details you need.

  What I see in device (with hardware ID) Manager:

  • Other features:

  Bluetooth controller:

  PCI\VEN_1814 & DEV_3298 & SUBSYS_18EC103C & REV_00

  PCI\VEN_1814 & DEV_3298 & SUBSYS_18EC103C

  PCI\VEN_1814 & DEV_3298 & CC_0D1100

  PCI\VEN_1814 & DEV_3298 & CC_0D11

  Ethernet controller:

  PCI\VEN_10EC & DEV_8136 & SUBSYS_183E103C & REV_O5

  PCI\VEN_10EC & DEV_8136 & SUBSYS_183E103C

  PCI\VEN_10EC & DEV_8136 & CC_020000

  PCI\VEN_10EC & DEV_8136 & CC_0200

  Network controller:

  PCI\VEN_1814 & DEV_3290 & SUBSYS_18EC103C & REV_00

  PCI\VEN_1814 & DEV_3290 & SUBSYS_18EC103C

  PCI\VEN_1814 & DEV_3290 & CC_028000

  PCI\VEN_1814 & DEV_3290 & CC_0280

  PCI device:

  PCI\VEN_10EC & DEV_5229 & SUBSYS_183E103C & REV_01

  PCI\VEN_10EC & DEV_5229 & SUBSYS_183E103C

  PCI\VEN_10EC & DEV_5229 & CC_FF0000

  PCI\VEN_10EC & DEV_5229 & CC_FF00

  PCI Simple Communication controller:

  PCI\VEN_8086 & DEV_1E3A & SUBSYS_183E103C & REV_04

  PCI\VEN_8086 & DEV_1E3A & SUBSYS_183E103C

  PCI\VEN_8086 & DEV_1E3A & CC_078000

  PCI\VEN_8086 & DEV_1E3A & CC_0780

  SM Bus controller:

  PCI\VEN_8086 & DEV_1E22 & SUBSYS_183E103C & REV_04

  PCI\VEN_8086 & DEV_1E22 & SUBSYS_183E103C

  PCI\VEN_8086 & DEV_1E22 & CC_0C0500

  PCI\VEN_8086 & DEV_1E22 & CC_0C05

  (USB) Universal Serial Bus controller:

  PCI\VEN_8086 & DEV_1E31 & SUBSYS_183E103C & REV_04

  PCI\VEN_8086 & DEV_1E31 & SUBSYS_183E103C

  PCI\VEN_8086 & DEV_1E31 & CC_0C0330

  PCI\VEN_8086 & DEV_1E31 & CC_0C03

  Unknown device:

  ACPI\HPQ0004

  * HPQ0004

  Hello:

  First install the chipset driver and reboot (will install the SM Bus controller).

  http://h10025.www1.HP.com/ewfrf/WC/softwareDownloadIndex?softwareitem=ob-103010-1 & CC = US & DLC = in & LC = on & os = 4063 & Product = 5278311 & sw_lang=.

  Second: Install the AMD graphics driver and restart.

  For switchable graphics in your notebook, you install only the driver AMD, which installs the drivers for the AMD and Intel for the graphical configuration has your laptop. NEVER install the Intel driver only or allow updates to the Intel graphics driver to install.

  http://h10025.www1.HP.com/ewfrf/WC/softwareDownloadIndex?softwareitem=ob-111285-1 & CC = US & DLC = in & LC = on & os = 4063 & Product = 5278311 & sw_lang=.

  Third: Install the audio driver and reboot.

  http://h10025.www1.HP.com/ewfrf/WC/softwareDownloadIndex?softwareitem=ob-104672-1 & CC = US & DLC = in & LC = on & os = 4063 & Product = 5278311 & sw_lang=.

  Now, the rest of the devices can be installed...

  Ethernet controller:

  http://h10025.www1.HP.com/ewfrf/WC/softwareDownloadIndex?softwareitem=ob-102604-1 & CC = US & DLC = in & LC = on & os = 4063 & Product = 5278311 & sw_lang=.

  Network controller

  http://h20565.www2.HP.com/portal/site/hpsc/template.page/public/PSI/swdDetails/?sp4ts.Oid=5229457 & spf_p.tpst = swdMain & spf_p.prp_swdMain=wsrp-navigationalState%3Didx%253D%257CswItem%253Dob_119873_1%257CswEnvOID%253D4059%257CitemLocale%253D%257CswLang%253D%257Cmode%253D%257Caction%253DdriverDocument & javax.portlet.begCacheTok = com.vignette.cachetoken & javax.portlet.endCacheTok = com.vignette.cachetoken

  Bluetooth controller

  http://h20565.www2.HP.com/portal/site/hpsc/template.page/public/PSI/swdDetails/?sp4ts.Oid=5229457 & spf_p.tpst = swdMain & spf_p.prp_swdMain=wsrp-navigationalState%3Didx%253D%257CswItem%253Dob_113004_1%257CswEnvOID%253D4059%257CitemLocale%253D%257CswLang%253D%257Cmode%253D%257Caction%253DdriverDocument & javax.portlet.begCacheTok = com.vignette.cachetoken & javax.portlet.endCacheTok = com.vignette.cachetoken

  PCI device

  http://h10025.www1.HP.com/ewfrf/WC/softwareDownloadIndex?softwareitem=ob-102497-1 & CC = US & DLC = in & LC = on & os = 4063 & Product = 5278311 & sw_lang=.

  PCI Simple Communication controller

  http://h10025.www1.HP.com/ewfrf/WC/softwareDownloadIndex?softwareitem=ob-102566-1 & CC = US & DLC = in & LC = on & os = 4063 & Product = 5278311 & sw_lang=.

  (USB) Universal Serial Bus controller

  http://h10025.www1.HP.com/ewfrf/WC/softwareDownloadIndex?softwareitem=ob-102571-1 & CC = US & DLC = in & LC = on & os = 4063 & Product = 5278311 & sw_lang=.

  Unknown device

  http://h10025.www1.HP.com/ewfrf/WC/softwareDownloadIndex?softwareitem=ob-116584-1 & CC = US & DLC = in & LC = on & os = 4063 & Product = 5278311 & sw_lang=.

• Cannot connect to the network after updating to iOS 9.3 Beta

  I downloaded and installed the public beta version of iOS 9.3 on my iPhone 6 today. After that, I am unable to connect to the network. I tried to reset the network connection of the phone and have my cell phone operator reset the network connection. None worked. Anyone else have this same problem?

  I was able to solve the problem by turning on "Airplane Mode" for 5 seconds, then shut off again. Everything seems to work fine now.