2nd disk on Dell OptiPlex 780 Mini-Tower

I want to install a 2nd SATA Seagate 148 gb SATA HDD on my OptiPlex 780 minitower. The drive is physically mounted in the machine and the power cable that extends from the disk HARD existing fits perfectly in place. I had to go buy a 18 "SATA 7 pin data Cable available from the drive to the motherboard.

Looks like there are two SATA containers-by-side in the middle section of the motherboard. A feed beige plastic and the other in black.

Does make a difference that the one that I use?

Is there another container, should I use instead of these?  Locate where?

After hanging hardware, what I need to do to get the machine to recognize the new HARD drive when booting?

Thank you

The colors are to let you know which port is 0 then 1 then 2, then 3, etc. White port is #3 the orange cable goes from the optical drive sata 1 connector blue is the boot disk which is SATA 0. After connecting the power supply and data, you go into BIOS Setup and turn on SATA2.

Tags: Dell Desktop

Similar Questions

  • Install a second hard drive on Optiplex 780 Mini-Tower

    I recently bought an Optiplex 780 minitower with Windows 7 DellRefurbished.com and I am happy with the machine. I would now like to add a second SATA hard drive that I bought, for which a power connector is available in the machine (the current hard drive is 250G and so is the other, I want to install.)

    However, the two ports of SATA cable on the motherboard are used, one for the existing drive and one for the CD - DVD drive. I understand that there may be a separator for a SATA data cable (as there were once two connections on some slick IDE cables).

    According to Belarc Advisor, the jury is Dell 0C27VV A03. Is it possible to install a second hard drive using a USB-to-SATA cable to the CD - DVD drive or the second hard drive? If so, set up a card with an internal USB connection USB PCI adapter? (I have more open slots). Or is there already a USB connection on the motherboard?

    Any advice, including suggestions on the parts that I need to get, are appreciated. I see that I can buy a USB-to-SATA cable that has two USB connectors and two sets of pins of connection to the hard drive. I assume that one of the USB connections is for power to the player. I wouldn't need, because the connection of the power supply is already here and elsewhere I wonder if I can get two the casing with a PCI card USB connections. Is there a USB-to-SATA cable with only the connection of data on the disk?

    The Manual explains the minitower 780 has 4 ports SATA motherboard and 2 interns, so you drive bays devriez have a place to plug in a second hard drive. (The desktop systems and small form factor 780 have 3 SATA ports). Unfortunately, the manual has a diagram of motherboard layout, so I don't know where the 2 other ports would be.

    The motherboard is compatible SATA1a and SATA2. A SATA3 drive must be retro-compatible with a SATA2 motherboard, but won't work on SATA2 data transfer speed. So the price of a SATA2 drive vs a SATA3 drive and the potential future use could be considerations.

    If you think that you will - eventually - upgrading to a new PC with a card mother SATA3, the new system would be able to handle the maximum speed of a SATA3 drive, but only works at speed SATA2 with a SATA2 drive.

    You will need to buy a data cable SATA for your new hard drive, but it's only a little extra money...

    If the manual is not correct (?) on the number of ports SATA on the motherboard, the system is supposed to have an on the rear panel eSATA port, so you can connect a player external eSATA HARD drive as an alternative.

  • Card mother Optiplex 755 SFF fit in a Dell optiplex 745 Mini-Tower dualcore?

    Hello, I might be able to buy a mini-tower Optiplex of second hand, and I would like to install the motherboard etc. my Optiplex 755 SFF.

    Wilting thi made?

    The idea is that, with the Mini tour, I can buy a better GPU.

    thanx.

    No, it does not.   Of the Board of Directors, the number of slots available, etc. is different.

  • Request for block of power SUPPLY Dell optiplex 7040 Mini-Tower

    I intend to buy optiplex 7040 MT at end of game. So I would like to know:

    1. the motherboard has the processor power connectors and standard motherboard or owners?

    2. is it possible to replace the stock power supply with a cooler master extreme power 600W more? If not, what more than size of power supply fits there?

    3. is it possible to mount a gtx 1080 in there?

    Hi iamprateekprakash,

    We do not recommend that it works because it has not been tested but according to your discretion, you can try, but as you rightly noted that it might void the warranty with Dell.

  • RAM upgrade [DELL OptiPlex 320 Mini-Tower]

    OK, said crucial, I can upgrade my pc to 4 GB, but only with 64-bit then... If for example... im actually uses 32 bit SO, ill buy a RAM of 2 GB, and I have a 512 MB... If I put 2 GB and 512 MB, will BE my 32 bit and my Optiplex 320 accept 2.5 GB of ram?

    Another thing, I see that the momories of my ar pc2-4300, but essential pc comment but to accept pc2-4200, what's the difference?


  • Add the second hard drive in the Dell Optiplex 780 SFF

    Hello

    I have dell Optiplex 780 SFF (Small Form Factor) PC. It has 3 options of SATA. I want to add 2nd hard drive in it, but I see no power for 2 hard drive cable.

    At the present time, I have a SATA Hard Drive and a SATA Super Combo. But the power cable from the SATA Super combo is very unique, I can not able to give the power of this cable to my 2nd hard drive.

    Is it possible to add 2 hard disk in the PC case?

    Best regards

    Dani

    Hi Dani,

    The SFF is using a drive slim lens that does not have a standard SATA power connection. You will need to buy an adapter or a SATA power cable splitter to power a second hard drive.

  • OptiPlex 745 Mini-Tower - GFX card options?

    Hi all

    I own an optiplex 745 Mini-Tower and I want to install a graphics card. I read the manual and it says that its PCI Express slot is 16 x but I could not find anywhere a response on whether it is compatible PCI-E 2.0 or 3.0. This makes the choice of a quite difficult graphics card. I read somewhere that if I install a 3.0 card gfx, it would be "backward compatible" feel, he would work on a 2.0 interface (isn't that backward compatibility option depends on the entirely gfx card?) Some cards him and others not so I'm not mistaken).

    So, this is the case with this model, or it is indeed a 3.0 interface?

    Could I install a 3.0 card gfx or 2.0?

    Thank you.

    jdj9

    PCI-E 1.0 or 2.0 are very good.  PCI-E 2.1 or 3.0 may or may not be backward compatible. Some R4 R5 R9 of R7 of Sapphire cards do seem to work in older systems like the precision, etc. 490.  I used an ASUS GDDR5 PCI-E 3.0 GT740 and it worked fine in my 745.

    The problem is that the profile for the 16 x power plug changes with version 2.1 and 3.0.  In addition, Sapphire will show they don't support UEFI BIOS systems with their R series cards.

    It is also why the older variety of version 1.0 or 2.0 cards often are not seen at all on the bus 3.0 on new computers.

    The Asus EAH6450 works very well in all models of Dell, in that I have tried.

    Not compatible with USFF or Micro because they have no slots.

    The only new parameter is the secure boot must be extinguished and CSM on for some cards to post.

    ASUS EAH 6450 SILENT card fits all models of Dell who have a Slot PCI - E, meaning that it does not work with USFF due to no expansion slot. The 6450 a 2 X the number of shaders as the 5450 doesn't.

    cs_setInnerHtml ('video_3f98d004-6424-4472-b955-c5b98d6fe85f', ");

    (Cooler) higher performance can be had from ASUS GT740

    GT740-2GD3-CSM 2 GB

    http://www.Newegg.com/product/product.aspx?item=N82E16814121877

    http://www.Newegg.com/product/product.aspx?item=N82E16814121439

  • Where can I buy a replacement for Optiplex 9020 Mini-Tower power?

    Where can I buy a replacement for Optiplex 9020 Mini-Tower power?

    I don't see anywhere on the Dell website to buy it.

    jayfie

    The OptiPlex 9020 MT supports / requires Dell exclusive 290w, a standard ATX power supply with connectors main motherboard 20/24 pin for power are not compatible, there is no details compatible power supplies available.

    You will need to contact Dell spare parts @ 1-800-357-3355 sales team, to a replacement unit.

    Bev.

  • No tengo sonido en mi dell optiplex 780 tengo wxp

    OLA me lla mo I have a dell optiplex 780 migue y lo muestra in el ordenador no audio rreproduce me pueden decir como instalo el driver of pc audio mid

    Advanced: http://www.dell.com/support/drivers/us/en/19/DriverDetails/DriverFileFormats?DriverId=R282894&FileId=2731115123

  • (Redirected) GPU that will work with my dell optiplex 780

    Hello. I recently bought a dell optiplex 780 desktop computer (DT). I want to increase the power of the GPU, but I don't know what are the options I have or what I can get. I mainly play minecraft and MMORPG games. Does anyone have suggestions for me to be able to get without breaking the Bank or buy a new power supply? If you could help, I would really appreciate it. Thanks again.

    Data sheet:

    CPU: Intel Core2Duo E7600 (3.06 Ghz)

    RAM: 4 GB (I don't know if its DDR2 or DDR3)

    GPU: Integrated (it seems an Intel GMA 4500)

    OS: windows 7 (64-bit)

    link to the PDF of the dell optiplex 780 (the one I have is the desktop Dell Optiplex 780 (DT)

    www.Dell.com/.../optiplex_780_tech_guidebook_en.pdf

    Hi R3DSTON3R,

    Please repost this in the forum Office help.

    http://en.community.Dell.com/support-forums/desktop/

  • Dell Optiplex 780 compatible graphics cards?

    Hi all I'm new on the dell forum. I love my Dell Optiplex 780 SFF and last year I bought a

    "Sapphire AMD HD6570 2 GB DDR3 Lite Retail PCI-E graphics card" which worked but was too big for the case.

    Now, I am looking for the best compatible graphics card, I saw in another post that the Sapphire HD 7750 Low Profile fits, but is there something better than that, that fits and is not low profile?

    CoreSci

    Hi all I'm new on the dell forum. I love my Dell Optiplex 780 SFF and last year I bought a

    "Sapphire AMD HD6570 2 GB DDR3 Lite Retail PCI-E graphics card" which worked but was too big for the case.

    Now, I am looking for the best compatible graphics card, I saw in another post that the Sapphire HD 7750 Low Profile fits, but is there something better than that, that fits and is not low profile?

    First, ask yourself "is there something better than that, which corresponds to and is not low profile?  No, because there ONLY cards that will fit must be small footprint!

    Second, 7750 HD cards are often recommended as a good choice for the Dells - unique slot and low power requirements.  I am running a 7750 HD in my own 780 MT, having chosen as the best choice for fit and performance.  That said, your power supply of the SFF is only 235W, which is very marginal.  I've seen reports of others by means of this type of card in a 780 SFF, but you should make sure, that it is not overtax the power, depending on what you have in your computer.

  • Lights diagnostic OptiPlex 3010 Mini-Tower 3 & 4

    Hi all, I'm new to this forum. 2 years ago, I bought a dell optiplex 3010 mini tour, suddenly, it stopped working, I have no screen, no video or any kind of sound, the only thing it does is to turn on the lights of number 3 & 4 on the front panel. What can I do?

    Thank you

    erickfv12

    Hi all, I'm new to this forum. 2 years ago, I bought a dell optiplex 3010 mini tour, suddenly, it stopped working, I have no screen, no video or any kind of sound, the only thing it does is to turn on the lights of number 3 & 4 on the front panel. What can I do?

    Thank you

    erickfv12

    3 & 4 usually diagnostic lights indicate a memory problem, see page 42 here:

    http://FTP.Dell.com/manuals/all-products/esuprt_desktop/esuprt_optiplex_desktop/OptiPlex-3010_Owner%27s%20Manual2_en-us.PDF

    First of all, try the following:

    Remove and reinstall all memory modules and try to start the system, to see if that makes a difference.

    Still does not start, remove all the memory modules [page 14] and then install only one module in the connector 1 and see if the system starts, and if the computer starts normally, reinstall an additional module.
    Do not start, move the module in slot 2 and still a time see if the system boots.

    Still does not start, then remove the first module, and using the other, repeat the sequence described above.

    Still does not start, purchase a new compatible memory module and try that.

    Then, if the computer still does not start, it is possible that the motherboard has failed and must be replaced.

    Bev.

  • Upgrade processor or motherboard on Dell Vostro 230 Mini-Tower

    I have a Dell Vostro 230 Mini-Tower, and the vehicle currently has Intel Pentium E6500 processor. I would like to move on to something better, because my current processor does not meet the minimum requirements of some games I want to play. I was wondering what processor I could update? I know that the new processor has to adapt to the taking of the motherboard, but I don't know how to find out what socket has my current motherboard, or even what motherboard it is.

    I would also like to know, if I upgrade the processor, but instead get a new motherboard, can't I get a motherboard and plug and it will come with a new processor, or he will have to adapt my current processor? Upgrading the motherboard makes much difference to the speed of CPU if I don't actually pass the processor?

    I am running Windows SP3 & DirectX 11, with 4 GB of RAM, and I also have an ATI Radeon 5670 HD graphics card and a power of 300W.

    I have to get a new power supply if I upgraded the motherboard or processor?

    Hello

    I mentioned the list of processors that are also compatible with the Vostro 230 Mini-Tower.

    Number

    Code name

    Cache

    Clock speed

    Front side bus

    Q9650

    Yorkfield

    12 MB

    3.00 GHz

    1333 MHz

    Q9550

    Yorkfield

    12 MB

    2.83 GHz

    1333 MHz

    Q8400

    Yorkfield

    4 MB

    2.66 GHz

    1333 MHz

    Q8300

    Yorkfield

    4 MB

    2.50 GHz

    1333 MHz

    E8600

    Wolfdale

    6 MB

    3.33 GHz

    1333 MHz

    E8500

    Wolfdale

    6 MB

    3.16 GHz

    1333 MHz

    E8400

    Wolfdale

    6 MB

    3.00 GHz

    1333 MHz

    E7600

    Wolfdale

    3 MB

    3.06 GHz

    1066 MHz

    E7500

    Wolfdale

    3 MB

    2.93 GHz

    1066 MHz

    E6300

    Wolfdale

    2 MB

    2.80 GHz

    1066 MHz

    E5400

    Wolfdale

    2 MB

    2.70 GHz

    800 MHz

    E5300

    Wolfdale

    2 MB

    2.60 GHz

    800 MHz

    450

    Celeron

    512 KB

    2.20 GHz

    800 MHz

    Vostro 230/230 s has been tested with Intel G41 chipset (motherboard) with ICH07 only.

    Motherboard and processor are two different components.

    I suggest you to upgrade the processor.

    Answer just to get help.

    Thank you & best regards
    Mustapha S
    #iworkfordell

  • Windows XP 64 bit will run on a Dell Optiplex 780 SFF or Optiplex 980 SFF?

    I intend to buy a Dell Optiplex 780 SFF or a Dell Optiplex 980 SFF, but I would like to know which one will work with Windows XP 64-bit.

    For Windows XP 64 Bit its better to use the somewhat hidden (old ftp site):

    http://FTP.Dell.com/Browse_For_Drivers/desktops/OptiPlex/OptiPlex%20780/

    http://FTP.Dell.com/Browse_For_Drivers/desktops/OptiPlex/OptiPlex%20790/

    http://FTP.Dell.com/Browse_For_Drivers/desktops/OptiPlex/OptiPlex%20980/

    This has the old drivers listed in multiple versions, including XP x 64 drivers not mentioned on drivers and downloads. The new ftp site is currently slightly broken.

  • Dell Optiplex 780 memory update does not

    1. I have purchase Dell Optiplex 780 supplied with memory DDR3 8 GB (4x2Go). I wanted to update so I bought 4 GB RAM (4x1Go) and tried to install it today. The diagnostic lights Dell on 3 and 4, which means that the memory is detected, but at fault. Now, I doubt that this new module of memory are defective. Here's what I did to solve problems:

      I took the original strips and installed a new. There are 4 DIMM and I tried to put it in all the 4 connectors DIMM one, but my PC will not start and shows the Dell diagnostic lights lit 3 and 4. then I put my original RAMS but still the same problem has happened that I also tried the two Rams Original one by one in all the slots but same question :(

      I also tried without installed memory but still Dell lights lit diagnostic 3 and 4 and no beep heard.

      Can someone help me what is the problem real?

    Hi Danish_smartpk,

    Welcome to the Dell Community Forum.

    If the 3 and 4 diagnostic lights are lit, it is code modules of memory detected, but a memory failure that occurred. You also mentioned that there is not only no beeps no heard when no memory is installed. When no memory is detected by the system, it emits beep codes indicating the same.  If the motherboard is not beep when no memory is installed, it could indicate failure systemboard.

    It is generally recommended that the BIOS updated before the new memory being installed. In addition, your computer supports a maximum of 8 GB of RAM DDR3 SDRAM (memory non - ECC only). If it already came with 8 GB of memory, it would not take an additional upgrade.

    If the system is under warranty, contact me with a message private by clicking on my name highlighted in blue. On the next page, click on the envelope icon and provide your service and coordinates (as mentioned below) so that I can access your system folders.

    • System Service Tag No.:
    • Name of the registered owner system:
    • Shipping address:
    • Number of phone/s:
    • E-mail address:

    However, if the system is out of warranty, you can contact a local technician for assistance to the replacement of the motherboard or contact our warranty Support has expired on the link below:

    http://Dell.to/12LmNBq

    Please do not hesitate to contact us in case of other queries.

    Thank you and best regards,
    Babita S
    #iworkforDell

    For easy access to the drivers, manuals and updates, please visit ourSupport Site .

Maybe you are looking for

  • Re: Fan is constantly running on Satellite A30

    Whenever I start my Satellite A30 the fan starts to operate in an audible manner. However, HD is about 32 to 35 ° C, according to speedfan. In addition, from time to time, the fan speeds up and gets really loud. In addition, sometimes the laptop just

  • Please help RE: HP G60 - 120US PC laptop

    My laptop referenced subject which beeps four 4 times per second (beep, beep, beep, beep) when I pressed the power button. After the beep, I got was a black screen. I tried remove the battery and let it sit Idol for a few minutes, again placing the b

  • Model Hp g6_1d11dx: 77077098 system disabled

    When the PC is powered on 'enter the password for the admin or power on password' then comes 'Broken system' 77077098.

  • Change of processor

    Can I upgrade my processor? IM using hp 14-d008au notebook pc and CPU frequency is only 1 GHz. Can I upgrade to a higher version?

  • I forgot my password of user login. How to get in & change?

    Login user password I forgot my password of user login. How to get in & change?