Cannot connect printer to my tablet surface Windows RT

Similar Questions

• Cannot connect printer B210a for Mac 10.7

  E-all-in-one printer cannot connect to iMac 10.7, error: turn off device if this does not solve the problem and the unit is broken and can not scan, copy, print.

  Installed the software and everything seems fine, so I try to print and could not communicate with the device, then scan and the same problem.

  The wndow in the printer displays the above message.

  Have uninstalled and reinstalled and still not connect, however the wireless can see the printer and my modem but cannot print, scan, copy

  any suggestion

  If you can not make a copy from the front of your printer, there is something wrong with the printer in-house.

  The printer turned on, unplug from the back of the printer for 30 seconds about and try again.

• Device - CANNOT CONNECT HP PHOTOSMART 5510 COMPUTER USING WINDOWS 7

  I need help in establishing a HP Photosmart 5510 to my laptop that is running Windows 7.  Can I connect the printer to my iMAC with no problems whatsoever, but I can't connect to my laptop.  It says thay there is no driver available for this printer. I also tried the HP website and they don't recognize the printer.

  Help

  When you are in the printer with the connected printer Add Wizard, select Windows update.

  It will take more than 5 minutes to get a list of printers that are updated.

• Windows cannot verify the digital signature - Microsoft Surface, Windows RT

  I'm trying to run an .exe file (not winload... just a simple software) on my Surface and the following error:

  "Windows cannot verify the digital signature for this file. A recent hardware or software change might be installed a file that is signed incorrectly or damaged, or maybe it's a malicious software from an unknown source. »

  I searched the forums and others who have experienced the same problems have usually comes to install the new Windows or on a PC where the solution is to reinstall with a CD... that I'm not on the Surface.

  I also tried fiddling around with the UAC settings and the .exe running as an administrator with no luck.

  Could someone help me please? Thanks in advance!

  You cannot run ANY executable meant to be windows on the RT. Windows RT surface is based on the NVidia Tegra processor and can not run code written for the Intel x 86 processor range.

  All programs must be downloaded from the Windows store.

• Cannot connect Router wireless and wireless for windows printer

  I can connect to a wired router and print. But can't do wireless?

  I can connect to a wired router and print. But can't do wireless?

  Given what you have... Yes - no idea.

  If your Windows Vista-based computer has a network inside wireless device and it has the correct driver and software installed and that you have configured the router (if you know the settings) then sees the network wireless on the Windows Vista machine and can configure to match how you have configured the router - there is no reason that you should not be able to connect to the site because you are in-Beach/without any noise between yourself and the router other than equipment of poor quality or poor quality software.

• 300 satellite - cannot connect printer

  We have 2 Toshiba laptops, the other more old works perfectly and printing wirelessly via the NetGear print server, just bought the satellite 300 and no matter how hard I try cannot get the laptop to print wireless - can go through all the installation procedures, says he recognizes the printer, but as soon as I press to print the test page , he returned to "error".

  I then have to remove printer, uninstall the plug in the USB cable, plug-and-play drivers involved and I am able to print via usb cable, but I really want to print wireless!
  Can anyone help?

  The two notebooks use the same operating system?
  I mean that so old works with Windows XP Home edition and new with maybe Vista you don't have good drivers Vista. Who knows what is the problem here?

  In my opinion, you should contact the manufacturer of the printer and ask what can be the problem. If the WiFi on Toshiba laptop working fine and you can connect it to your router for Toshiba is the end of the story.
  Please don't get me wrong, but all questions with external devices are clarified with the manufacturer of the product. They have enough experience with own products and I'm sure they can help you about this.
  Do you agree with me?

• Cannot connect printer to mac - status is idle

  I'm fit to be tied for no reason at all, my HP Officejet 6500 printer is connected, but it won't print anything because it says that there is no connection. utility, says the status is idle - cannot figure this out for what whatever - what happens in the world I'm missing?

  Hi @lindyd ,

  I see that you are getting a message "that there is no link. I can help you.

  Check the connections, if you are using a USB cable.

  Try a different USB cable, if you have one available.

  Fix permissions of the drive on the Mac:

  Close all applications.

  In the Apple menu, click OK, click Applications, and then click utilities.

  Double-click disk utility.

  Highlight your hard drive / partition on the left.

  Click on check and then repair disk permissions.

  Restart the computer...

  Reset the printing system:

  Note: This will remove all printers in the print and Fax/Scan, any printer deleted can be re-added later by clicking the sign plus (+) symbol.

  Click the Apple icon, and then click System Preferences.

  Click on printers and scanners.

  Make a right click (or Ctrl + click) in the left white side panel, and then click Reset printing system.

  Click OK to confirm the reset.

  Type the name and the correct password.

  Click OK to reset the printing system.

  Then click on the + sign to add the driver, you may need to click the drop down menu to select the name of the printer, and then click the Add button.

  Test the printer again.

  What operating system do you use? Mac OS X: how to find which Mac OS X Version is on my computer?

  How is the printer connected? (USB, Ethernet, WiFi)

  If you need help, let me know.

  Good day!
  Thank you.

• LaseJet M1530 MFP: Cannot install printer multifunction LaserJet M1530 on Windows 10 drivers

  I tried to install the downloaded driver software from http://support.hp.com/us-en/drivers/selfservice/HP-LaserJet-Pro-M1536-Multifunction-Printer-series/3... for my multifunction printer drivers LaserJet M1530 on my new windows 10 Pro o/s, but it has always failed with the message below. Restarted my laptop and I tried installing several times, are the same mistakes. Also, I installed the old drivers from the CD supplied with the printer, the same error as shown.

  The drivers is not compatible to Windows 10? Any suggestion to solve this problems?

  

  Hello @chrislim2888,

  It is a great place to get help! I read your post and see that you are unable to install the printer on the computer Windows 10. Thank you for providing all the information and the screenshot. I want to help you solve this problem.

  I have provided with steps to unlock the hidden administrator account and the installation of the printer on this account to see if this will help this situation.
   
  Note: Do not connect the USB cable until you are prompted during the installation.

  • Go to your Start menu and in the box "search programs and files", type CMD.
  • CMD will fill as an option to search above, just right-click on it and "run as Administrator".
  • Once opens in CMD (command prompt), type net user administrator / Active: Yes and press ENTER.
  • Then, close CMD and then restart your computer.
  • When your computer is on the newspaper in the new account which should show. It will be called Administrator and will not have a password on it.
  • If your computer automatically connects to your account after the restart then go to your Start menu and click on the arrow next to 'shutdown' and choose 'change user '. Now log on to the administrator account, that we have just released.
  • Under the administrator account, install the printer software.
  • Immediately after connecting the USB cable, follow the steps described in this paper: A Fatal Error displays during Installation of the software. This should resolve this error message.
  • Test the printer.
  • To disable the Admin account start at step 1 and type net user administrator / active: No..

  How is the printer connected?

  Please click the 'Thumbs Up' to thank me for my efforts! If this helps you resolve the problem you are experiencing, please click the "accept as Solution. Keep me posted. Good luck!

• Cannot connect to internet after upgrading to windows xp professional version 2002 service pack 1.

  Hello

  My labtop is hp nc6000. I have upgraded to windows xp professional version 2002 service pack 1 and I can't connect to the internet.

  I used another computer desktop to download service pack 2 and 3, but still cannot install these due to no internet connection.

  I also tried to upgrade the drivers of hp nc6000 obtained from another computer, but received a message that the package cannot be decompressed - another copy must be obtained.

  Please help with kindness.

  Thank you.

  Are you trying to connect wireless or ethernet cable? Have you checked your connections are enabled? If you use the wireless option, you use the hp or windows connection manager?

  I sugest you try to connect with an ethernet cable and go to the network connection in Control Panel and check if your local connection is enabled. If you connect through a router has the DHCP settings.

  If you use the wireless you will need to enter the connection as a new SSID and key details

• cannot connect to internet after updating the window have local only

  I have the 'local only' box do not connect to wireless internet cannot communicate with a dns server or router/AP access. connection with Wired...  I disabled router, rebooted, nothing seems to solve problems

  http://www.bleepingcomputer.com/tutorials/tutorial140.html

  Understanding Windows Update and Extras in Windows Vista at the link above.

   

  Remove the Vista updates; two ways to do this:

  1. a System Restore to before the updates:

  Click Start > programs > Accessories > system tools > System Restore > restore time/choose your own date > next

  If you use Norton, disable it before using the system restore.

  If it is impossible to enter the Normal Mode, do a Safe Mode system restore:

  Press F8 at the startup/power and the list of startup options, use THE ARROW key to select Safe mode > and then press ENTER.

  System restore steps according to the info above.

  Also:

  2. click on start > right click on computer > properties > Windows updates down the lower left corner > updates installed in the lower left corner in the next window

  > then click the one that you don't want > uninstall will appear at the top > uninstall it.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  In addition, on the page where you clicked "Installed updates", click on change settings at the top left corner it

  > Change update settings in the next page of AutoUpdate to "check for updates but let me choose etc" > OK ".

  When you take a look at pending updates, you can either download/install them one at the time, namely the update causing you problems.

  > or if you do not need an individual > right-click on > UAC prompt > hide it

  See you soon.

  Mick Murphy - Microsoft partner

• Publisher cannot connect printer wireless Officejet 6500 has E710e and the laptop over the network

  I just changed my ISP and moved to British Telecom, who sent me a new router. The new service is in place and working well and I reconnected my Officejet 6500 a E710e CN557A to the wireless network. But I can't connect the printer to my laptop no matter what I try. I have uninstalled and reinstalled the printer on the laptop using the original CD and then updated to the latest drivers. I even reset the printer to default and then network related setting before attempting to connect the portable computer whose IP address of the printer without success. My laptop OS is Windows 7 32 bit and the printer is just over a year. He worked like a dream with the old wireless network.

  I have already downloaded on my laptop HP - HP Print and Scan Doctor diagnostic tools and troubleshooting network printer connection. Printing and scanning doctor can't see the printer and I followed the instructions of troubleshooting without success.

  Any help and advice would be much appreciated.

  If it is a BT Home Hub, they don't play well with HP wireless printers.

  You can try this - remove all instances of your printer in Control Panel > devices & Printers. Then:

  1. make sure the printer is on and connected to your network. Verify that you can access the printer's internal web page by accessing its IP address before continuing. Get his IP address for a network Test printed on the front of the printer.
  2. click on > start > Control Panel > devices & Printers.
  3. click on add a printer
  4. Select local printer
  5. Select create a new port and select Standard TCP/IP Port, and click Next.
  6. under device type, select TCP/IP Device. Under the name of host or IP address, enter the IP address of the printer. Click Next.
  7. Select Hewlett-Packard in the list of manufacturers and select and select your printer model. Click Next.
  If your printer model is not in the list, then select disk provided, browse the CD that came with your HP printer and select the first file begins with hp and ending with INF. click Open, then OK. Select your printer model. Click Next.
  8. If prompted, use the driver that is currently installed.
  9. He will ask the name of the printer - enter a new name or use the one existing. This will be the name of the printer that you select from other applications.
  10. we may ask you to share the printer. Choose No.
  11. the printing area of Test Page is displayed. Go ahead and print it out.
  12. click on finish.

• Cannot connect every android device on my Windows 8 machine via USB. Worked fine when I got Windows 7.

  Since my upgrade, I can access is no longer my Nexus 7 Tablet nor my EVO 4 G LTE phone on my computer via a USB cable. I searched the Internet far from help. So far, it seems that no one can connect via USB. Thanks a bunch of Microsoft.

  Hi DanWilson,
   
  Thanks for the post about Microsoft Community.
   
  It seems that you are not able to connect any devices android on your computer with Windows 8.
   
  I would like to collect some of you before we head to the troubleshooting steps.
   
  (1) are you getting any error message or error code when connecting android devices?
  (2) are your other devices Universal Serial Bus works well?
   
  I would ask you to please follow the troubleshooting methods listed below:
   
  Method 1: Run the hardware troubleshooting tool. Follow these steps:
  
   
  a. press the Windows key + W key on the keyboard.
  b. type Troubleshooting in the search box, and then press ENTER.
  c. click on hardware and sound.
  d. click Next to run and follow the steps to perform this troubleshooting.
   
  Method 2: Try to connect to another Universal Serial Bus port and check if it helps.
   
  Method 3:
   
  Uninstall and reinstall the USB controllers. Follow these steps:
  
   
  a. press Windows + R keyboard key.
  b. type devmgmt.msc , and then press ENTER.
  c. expand Bus USB controllers.
  d. right-click on each device under the Bus USB controllers node and then click on uninstall to remove them one at a time.
  e. restart the computer and reinstall the USB controllers.
   
  
  I recommend you to download and install the latest driver from the manufacturing site.
  
   
  Please go through the following links as reference:
  
   
  Install USB 3.0 and other USB devices:
   
  http://Windows.Microsoft.com/en-us/Windows-8/install-USB-3-USB-devices
   
  Why Windows is not find my device?
   
  http://Windows.Microsoft.com/en-us/Windows-8/why-isn ' t-windows-conclusion-device
   
  Why Windows is not find my device?
   
  http://Windows.Microsoft.com/en-us/Windows-8/why-isn ' t-windows-conclusion-device
  Please write back to us if the problem persists.

• Cannot connect printer hp on my macbook air even if the two are shown to be working normally.   software is updated.

  My hpprinter is on you, months and are using wireless since the purchase.   Suddenly however the link between the Mac and the printer is not there and everything I've done to try to establish the connection it does not.   Should I uninstall the printer and start over? Or someone who has experienced the problem there any other suggestions?

  Open system preferences > printers and Scanners and select the print tab.

  Right or control click on the printer on the left, then click on reset the printing system.

• Cannot connect printer to the internet for instant ink service

  Installed Flash cartridges for the first time to my printer Officejet Pro 8610. The printer prints very well, but it is not connected to the internet by message on the printer screen. I checked the connection to the wireless router and it is connected correctly. I can also print from my remote legacy, iPhone, iPad, etc. "When I try to connect to the internet the printer, I get the following message appears on the printer screen.

  "Update conflict

  Web services and the HP printing software are updated on the computer or the built-in webserver (EWS). Wait for the update to finish and then try again. »

  When I go on the 'connected' site, it shows the registered pronter but it shows that the printer is "offline". When I try to update, nothing happens.

  Thank you very much. Worked the first time.

  Steve Raimondi

  happytohelp01 wrote:

  Hi @sraimondi,

  Welcome to the Forums of HP's Support.  I see that you get an error message of connection on your printer Officejet 8610.

  Please define Manual of the printer an IP address manually and DNS servers.  I've included a link to another post which has the steps with screenshots on how to do it.

  Please let me know the results.

• Cannot connect Xbox 360 Elite to runnings Windows Vista PC

  After surfing the internet for hours, I really need help with this problem...

  I am trying to connect my Xbox 360 Elite to my PC running Windows Vista Home Premium (32 bit).

  I can connect to Xbox Live without any problems, and the Xbox also appears in the network view in Windows (and in WMP11 media sharing).

  The Xbox also discovers the PC and COMPUTERNAME:username display on the screen. But when I try to connect the Xbox since it does not work. I have tried many solutions and advice found on the internet, but I can't work.

  I also tried to use the Media Center and connect the Xbox as an Extender. Does not work either.

  Is there a setting somewhere in Vista that keeps me?

  Hi Christian,

  ·        You receive an error message when you try to connect to the Xbox?

  ·        You are able to access the Xbox from the PC?

  You can try to temporarily disable the security software and third-party firewall on the computer and check if you can access the computer of Xbox. If you are able to access, you can contact the manufacturer of security software and firewall manufacturer to check if you need to change the settings. Subsequently re - activate the firewall and security software after verification.

  You can also post your question on the xbox forum and check if you can find any suggestion that can be tried to solve the problem of connectivity to the xbox. Access the link below to post your question in the Xbox forum.

  http://forums.Xbox.com/

  I hope this helps. Let us know the results.

  Thank you and best regards,
  Srinivas R
  Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.