3FO error found no boot device

Similar Questions

• Error message is Boot Device not found, Hard - Disk (3F0)

  Hello!

  I have PC HP Pavilion dv6 with operativ system windows vista Entertaiment. I got an error as Boot Device not found. Please install an operating system on your hard drive. Disk-hard (3F0) Recovery does not work and received the error 100a

  Please help me

  Kamal

  It seems that the hard drive has failed and needs to be replaced. Laptop SATA hard detail can be used. Just be sure to get a quality at least equal the original in order to use recovery disks. It may be big, but not small ability more. For example if you have a 320GB hard drive you can use a 500 GB hard drive but not a hard drive of 250 GB.

• Error 0X0000007B (inaccessible boot Device) to start.

  From two days ago, about 8 or 21:00 my computer freezes whenever I clicked on any icon or attempted to open anything. Not even all that normally appears as yahoo messenger and all my other programs popped up. After this has is spent several times I went to safe mode and thought at first maybe it was something with the memory, or maybe the computer was going slowly I went into cleaning disk and deleted files. Then, I went in my add or remove programs and deleted some things more freeing space. After that happened, I tried again and still no luck. Shortly after, I went back to the security mode and attempted a full McAfee scan for viruses. It took 11-12 hours and there is no virus. Then, I went back into safe mode and tried to do a restore of the system for a few days back. I've tried twice and both times a screen popped up error after about 3 or 4 minutes for system restore. After some research I found this means cessation critical object, so I tried a startup repair, it said 0X000000F4 (0XFFFFFA8006881BA0, 0XFFFFFA8006881DD8, 0 X 0000000000000003, 0XFFFFF800022E3540). I tried twice and both times it ended around 124545 887104. That was 1%. Then I went back into safe mode and some more the object of research and discovered that using the F8 key I could try solve the problem. The second, I pressed the button repair he opted for another blue screen this time with 0X0000007B (0XFFFFF98000A069E0, 0XFFFFFFFFC0000034, the last two are all zeros. I learned that it was Inaccessible boot Device. I tried to use my last known configuration after return in safe mode and that did nothing. I then went to my device because Manager that all the time I did research we're talking maybe a driver is not updated. I discovered that my drivers are all updated, but my IR devices has a triangle attention beside him. When I clicked on properties I found it saying: this device does not work properly because Windows cannot load the drivers required for this device. (Code 31). I tried many things, and every time that I have either get a blue screen or my attempt does not work. Please help me, if I can't find a solution, I'll be forced to format my computer and restart my computer life. (email is * address email is removed from the privacy *)

  Hi Killace,

  Step 1

  Try the suggestions in the article below.
  http://support.Microsoft.com/kb/922976

  Important This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:
  322756 (http://support.microsoft.com/kb/322756/) how to back up and restore the registry in Windows

  Step 2

  Uninstall IR device drivers...

  A. Click Start, type devmgmt.msc in the start search box and press on enter.

  B. do the driver right click and choose uninstall.

  C. restart the computer and check if that helps.

  Step 3

  Disconnect all external devices.

  Put your computer in a clean boot.

  The following link has steps showing how to perform the clean boot:

  Note: Please make sure that the computer is configured to start as usual according to step 7 of the article:http://support.microsoft.com/kb/929135

  Bindu R - Microsoft Support
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Satellite C650-17Z - only PXE error message no boot device

  Hi people I was wondering if anyone of you kind people out there could help me. I have a Satellite C650-17Z model and when turn on is the message I get:

  + Intel UNDI, PXE - 2.0 (builkd 083) +.
  + Copyright (C) 1977-2000: Intel Corporation.

  + For Atheros PCIE Ethernet Controller v2.0.1.9(12/15/09) +.

  + Check the cable connection! +
  + PXE - MOF: exit Intel PXE ROM. +.
  + No boot device - insert boot disk and press any key.

  Can anyone any sense of the message above?

  Hey Buddy,

  This error message means that an incorrect boot order is set and the computer tries to start between LAN port to the internal HARD disk space. It should therefore go into BIOS setup and change the boot order. Put the HARD drive as the first boot device internal.

  Take a look at this article from Toshiba:
  [PXE error message appears during the clean boot procedure | http://forums.computers.toshiba-europe.com/forums/ann.jspa?annID=8]

• Satellite L750 - no error at startup boot device

  When you try to start my Satellite L750/755, I get an error no. Bootable Device.

  Before I try any recovery, is it possible to remove the HARD drive and connect it to my other PC so that I can get all my pictures, music, etc. it. If so, do I need.

  I have it on my old desk, and bought a HARD drive with a USB caddy, if disk HARD just looked like an external drive.

  Thank you very much

  Tim

  Yes, you can remove the HARD drive and connect it to your other laptop / PC with USB HDD external enclosure. With the help of this forum you can connect your HARD drive as an external device that must be recognized and listed in the Windows Explorer, so you can have full access to all your stored data.

  Back up all your data and put the HARD drive in your laptop.

  Usually, if there is not a hardware problem you can start your laptop and press F12 to get into the boot menu. When the boot menu appears on the screen that you can put the recovery disk of information optical disk drive, choose the CD/DVD drive and press ENTER. After making this optical drive should start the disc and start to copy the data to the HARD drive.

  What you can do before you start using the recovery disc is to enter the BIOS and set it to default settings.

  Please try it and send feedback.

• XPS 410 new HD found no boot device

  Have a 410 XPS which had a RAID configuration. The two HD went bad so I wanted to just buy 1 HD and disable the RAID.

  I put the 1 HD in and installed WinMCE from the supplied DVD. Everything goes well until I did a reboot. "No Boot Device Found" "F1 to start over or F2 for Setup. The PC will start if I let Windows DVD in the drive, but if this isn't in the drive I get the above message.

  I went into the BIOS and made sure that RAID has not been set on "On" and I checked the boot sequence. In the boot sequence, I noticed that the DVD player is the only number next to it. For the life of me I can't understand what Miss me.

  
  

• How can I fix this error? Available boot device. YOUR 0: Installed; YOUR 1: Installed; YOUR 2: None; YOUR 3: no

  I can't use my desktop pc, because this message appeared when I started my pc since the closure.  Help, please!   I'm not very computer savey.

  The message should look like this:

  No available boot device:

  SATA 0: installed

  SATA 1: installed

  SATA 2: no

  SATA 3: no

  This means that there is a problem with your hard drive. If, in addition, the message is not be displayed correctly, there must be something else wrong with your computer. You will need to bring to a repairman.

• Operating system not found, no boot device has been detected but can run XP in Bootcamp without problem?

  The title says it all. I searched and tried the partial fixes to some of the questions.

  I have installed Bootcamp and a working copy of XP Pro works no problem at all.

  I installed VMFusion and merger goes to the partition, and I get the error no bootable devices and not found any BONES. It seems trying to boot from a network, it works to resolve a MAC address. Then he hangs on. Then don't say: "no found bone." I put the disc XP Prop and try reinstalling and it said: none found disk... I have attached a few photos.

  Thank you

  Note: These senses are different which have already been posted so read and follow through... Note: These steps assume that you have a single Apple to default installation of Windows on a single Boot Camp partition and Boot Camp of VMware Fusion single default partition Machine virtual (without a snapshot *) and if you have changed the partition Boot Camp Virtual Machine to add additional hard disks to be virtual or RAW disk then do not use these instructions unless you backup the Boot Camp partition the Machine package virtual first. * Also note that Fusion 2.0.0 may accidentally have a snapshot with the virtual partition Boot Camp Machine and it should not have, then you should check to ensure that the condition does not exist as well. (With merger closed if the partition Boot Camp Virtual Machine package is over 1 MB in size, then you might have a snapshot in place and do not continue with these instructions.)

  ===

  1. If the merger is open, close it.

  2. in a Terminal (/ Applications/Utilities/Terminal) copy and paste command, as the following and then press Enter and it will delete the partition Boot Camp Virtual Machine of the metadata and the Virtual Machine to help.

  Note: This does not affect the Boot Camp partition install windows in that it does not remove it.  Also be sure you copy all the command line below, as well as, "RM" at the beginning of the ' (quote) after the s in the Machines. "

  RM - dfr "/Users/$ the specified item was not found./Library/Application Support/VMware Fusion/Virtual Machines/Helper/naos-1.0.vmwarevm/vmware.log ' ~/Desktop/Helper_vmware.log

• I have a hp mini 311-1037nr who recently failed to start. data error is "boot device not found.

  My hp mini 311-1037nr does not start. Its running windows 7 and no changes have been made. Error message is "boot device not found. It will not run a hard drive test, gives "the hard disk does not exist '. Tried not to reset the default settings of the BIOS also no luck. any ideas?

  Drive appears you in the BIOS? If not, and if reinstalling it does not help that I assume safely that the hard disk is dead.

  You can also try to download/creation of the various Linux Live boot floppies [Unbuntu, PartedMagic, etc.] to confirm that your other components are not at fault. If you can start and run a live linux OS then your other components of the system may very well.

  You can also remove the drive of your machine and install it as a secondary drive in another computer or a disk to see if you can access it.

  You can also run a HDD diagnosis by accessing your site of hard drive manufacturers and download/creating a diagnostic boot disk.

• New hard disk identified but causes the error "no boot device found".

  Hello

  Recently my computer (Inspiron 15 3521) had hard drive failures, so I ran a diagnosis which resulted in replace me the hard drive. I thought I would upgrade the old 500 GB for a hard drive of tuberculosis.

  Now, when I install the new hard drive, that it translates "found no boot device" I ran diagnostics on it and checked everything, and it recognizes the hard disk. Diagnosis is nothing but the problem persists. Any help would be great!

  The fundamental question: you have installed Windows on the drive?  New disks arrive Virgin - you'll need the support of recovery do you when you have received the system to install the operating system on the disk.

• Inspiron One 2320 inaccessible AIO, Windows 10 boot device error,

  I have a Dell All In One 2320. When I tried to install windows 10 throughout the system has stopped working. It is now gives me an error of Inaccessible Boot device. what I can do. It worked fine on windows 7.

  Crackers Holy, how horrible a response. Reference Dell... is this seriously the best you can do?

  Devaux, go here, this is a thread on the support site for Microsoft with a lot of information on how to recover your system and get 10 Windows installed: http://bit.ly/1IkgMgU

  Good luck! I have an Inspiron One 2320 also and I do research on potential problems until I update it.

• HP laptop: when I start my laptop it will be showing "no boot device."

  When I start my laptop it will be showing "no boot device."

  Hey @Swapvb

  First of all, I want to you welcome to the Forums of HP Support! On the forums, you will find solutions, suggestions and helping hands!

  I understand that you can't your laptop because you do not receive a message from boot device.

  The error message says "Boot Device not found"? If so, please use the Boot Device found not or Hard Drive not detected error document.

  Here, I have provided a list of measures to try with an additional documentation if you need. Please try to:

  • Perform a hard reset
  • Restore the default settings of the BIOS
  • Perform a test equipment
  • Reconnect the hard drive

  If none of the steps above troubleshooting solved the error condition, please make sure that you back up your personal data from your laptop, and then try again to perform a HP system recovery again.

  If the recovery of the system is not yet functioning, please use the document Troubleshooting an HP System Recovery .

  If this answer helped, please use the button accept as a Solution . If you want to give me a five high virtual, please click the Thumbs Up icon below.

  If you need assistance, I would be more than happy to continue to help you. Please re-post with the results of troubleshooting as well as your model number (How can I find my model number or product number?).

  Thanks for joining the community of support HP!

  Have a great day!

• No boot device after changing the partitions

  Hi all. I've lost the ability to start in my Windows partition through bootcamp. When I use startup disk system prefs. OSX, he can see Bootcamp, but rebooting produces an error message "no boot device." If I hold the alt key while rebooting, I can only see the Macintosh HD, without bootcamp (or recovery, by the way). I can see the Bootcamp drive on the desktop, so I can use Parallels to run Windows based on this drive, I know that the drive itself is ok.

  I did a fair bit of mucking partitions. I decreased my Macintosh HD partition and inserted a new Macintosh HD and Bootcamp. Then, things are funky, and I created a volume of CoreStorage on top of Macintosh HD and it is associated with a partition on an SD card (created a fusion DIY with a TarDiskreader). All this worked fine and I now had a huge hard drive Macintosh and boots fine Mac, Parallels works fine, but I can't start natively in Bootcamp.

  Can someone help, please?

  Here is the output of "distill the list:

  /dev/disk0 (internal, physical):
     #:                       TYPE NAME                    SIZE       IDENTIFIER
     0:      GUID_partition_scheme                        *500.3 GB   disk0
     1:                        EFI EFI                     209.7 MB   disk0s1
     2:          Apple_CoreStorage Macintosh HD            279.8 GB   disk0s2
     3:                 Apple_Boot Boot OS X               134.2 MB   disk0s3
     4:                  Apple_HFS Untitled                20.5 GB    disk0s4
     5:       Microsoft Basic Data BOOTCAMP                199.4 GB   disk0s5
  /dev/disk1 (internal, physical):
     #:                       TYPE NAME                    SIZE       IDENTIFIER
     0:      GUID_partition_scheme                        *255.9 GB   disk1
     1:                        EFI EFI                     209.7 MB   disk1s1
     2:                  Apple_HFS TarDiskFirst            309.0 MB   disk1s2
     3:          Apple_CoreStorage Macintosh HD            199.8 GB   disk1s3
     4:                 Apple_Boot Boot OS X               134.2 MB   disk1s4
     5:                  Apple_HFS WinData                 55.2 GB    disk1s5
  /dev/disk2 (internal, virtual):
     #:                       TYPE NAME                    SIZE       IDENTIFIER
     0:                  Apple_HFS Macintosh HD           +479.0 GB   disk2
                                   Logical Volume on disk0s2, disk1s3
                                   663FCC6B-F913-4137-B61C-9A318FF32328
                                   Unencrypted
  

  And 'sudo disk/dev/disk0:

  GPT fdisk (gdisk) version 1.0.1
  
  Warning: Devices opened with shared lock will not have their
  partition table automatically reloaded!
  NOTE: Write test failed with error number 1. It will be impossible to save
  changes to this disk's partition table!
  You may need to deactivate System Integrity Protection to use this program. See
  https://www.quora.com/How-do-I-turn-off-the-rootless-in-OS-X-El-Capitan-10-11
  for more information.
  
  Partition table scan:
    MBR: protective
    BSD: not present
    APM: not present
    GPT: present
  
  Found valid GPT with protective MBR; using GPT.
  
  Command (? for help): p
  Disk /dev/disk0: 977105060 sectors, 465.9 GiB
  Logical sector size: 512 bytes
  Disk identifier (GUID): 918541C4-E232-154C-BC98-413BDA1DBBCC
  Partition table holds up to 128 entries
  First usable sector is 34, last usable sector is 977105026
  Partitions will be aligned on 8-sector boundaries
  Total free space is 262288 sectors (128.1 MiB)
  
  Number  Start (sector)    End (sector)  Size       Code  Name
     1              40          409639   200.0 MiB   EF00  EFI System Partition
     2          409640       546975591   260.6 GiB   AF05  Macintosh HD
     3       546975592       547237735   128.0 MiB   AB00  Booter
     4       547237736       587356159   19.1 GiB    AF00  Untitled
     5       587618304       977104888   185.7 GiB   0700
  

• computer laptop Windows 8 cannot find the boot device

  Hey,.

  I had a problem with my dell vostro laptop computer with windows 8 OS.

  Today, when I try to boot my pc, I have an error like "no boot device found. If please restart the PC or insert the boot device.

  Later, I tried to run diagnostics on start up, here I got an error like 2000-0142. The test failed.

  But now I can't start my pc because pc says that "your PC has encountered an error.

  I think that there is an error in the HARD drive.

  Can someone help me please?

  As I said it is a mistake to standard hard drive to Dell machines, who tells you that they do not have or go.

  Once replace you a hard drive in this State.

  Read this information from the Dell Community.

  http://en.community.Dell.com/support-forums/laptop/f/3518/p/19451299/20115134.aspx#20115134

  http://en.community.Dell.com/support-forums/disk-drives/f/3534/p/19498610/20329964.aspx

  http://en.community.Dell.com/support-forums/laptop/f/3518/p/19485947/20274290.aspx

  They are all the same error code 2000-0142 and they all need a replacement hard drive.

  _______________________________________________________

  You cannot start Windows if you can't do a backup.

  You can try this, but no warranty if:

  Saving your files:

  You can remove the hard drive and put it in a hard drive USB enclosure > plug it into another computer > and try to read and copy your data in this way.

  Or, you can download Knoppix > make a bootdisk to > start your system with it (IF your material is all work) > and copy your data from the hard drive like that.

  http://Knoppix.NET/

  Your other option is to recovery specialists of data that are very, very expensive.

  See you soon.

• Satellite L850D - 12 p - no boot device - please reboot

  I hope someone can help

  I have the laptop above and I turned it on to get this error

  + "No boot device - please reboot ' +.

  But was OK yesterday
  It doesn't let me in Bios at all. As soon as I turn it on I get this message instantly
  I tried a new hard drive in the laptop, but still the same error

  Hello

  > I tried a new hard drive in the laptop, but still the same error

  The laptop computer was preinstalled with the Win 8 System.
  The laptop BIOS UEFI s takes the mode and secure boot.
  This means that if the secure boot and UEFI is enabled, the laptop is unable to start the external device or wouldn't boot to other systems such as Windows 7 or Linux.

  To install another system, you must change the mode MSC UEFI boot mode and have disable secure boot option.

  To access the BIOS, you must press the F2 key immediately after the laptop has been powered.