4K XAVC in Media dial 7

Similar Questions

• System Image recovery, restore the system from an image will include my program inside?

  I have a windows backup Image of the 17/11/2015 which I wan to restore my Windows 7 computer.

  I load a trial version of media compose and he knocked my version of media dial 5.

  I have more disks to it.  A restore of the system from an image will include my program inside?

  And it will not restore, he said that the system cannot find the specified file.

  What can I do to get it to restore the computer?

  Instead of a "Image Restore" I recommend you to do a "System Restore" to set up Windows back a week or two. You can start the process with rstrui.exe.

• When you search for a file from an application, I only see the folders and subfolders and impossible to open the folder to point to the files

  Windows 7 pro. When I need to make an application to a file, for example in Media dial 6 (video editing room) I open the browser and find the drive and folder the file is in, but I don't see the folder with a + extend next to him, if I develop I cannot see its subfolders, but can not see inside the folder to view the file. It must be a simple setting in windows that I can't work.  Any help would be appreciated.

  JPH

  It look something like this picture below?  If so, the program is specifically asking you to choose a folder, not a file.  This could mean that the program will read all the files once you make your selection, and then offer another way to choose the particular file (such as a list in the library of the program or file display itself).

  
  http://Skeene.NET/answers/FolderSelection.PNG

• NEW AVID Media Composer v7 AMA XAVC published plugin

  XAVC/XDCAM plug-ins for Avid (PDZK-MA2)

  This WADA plugin supports XAVC and XDCAM / XDCAM EX files produced Avid Media Composer, Symphony and NewsCutter, allowing display and editing capabilities.

  What's new

  PDZK-MA2 Version 3.1 supports the operating systems Avid Media Composer 7 and NewsCutter 11 with the following new features:

  • AMA link to XAVC 4 K
  
  
  • Consolidate the XAVC HD
  
  
  • Color transformations using watch profile
  
  
  • Cropping

  Concerning

  Peter

  Certainly, here:

  http://community.Sony.com/T5/F5-F55/new-Avid-Media-Composer-v7-Sony-AMA-plug-in-for-4k-raw/m-p/15919...

  Concerning

  Peter

• How can I associate social media and their icons in my signature?

  Can you help me please? I can't find out how to add social media and their images in my email signature. I do not know the code, so if that's what I have to do, send me a process step by step on how to do it. It would be much easier if I could have called for help instead of having to go through a complicated website and system just posted a question which may take long to get a response.

  You dial you signature in an HTML document. You can do it in Thunderbird, just as you could write an e-mail message.

  You can insert images inside, and you can attach to these images (via their property editors), links to social media sites.

  Finally, you save your signature as an HTML file, and then set to use as your signature.

  https://support.Mozilla.org/en-us/KB/signatures
  http://en.flossmanuals.NET/Thunderbird/ch018_composing-messages/
  http://KB.mozillazine.org/Signatures_%28Thunderbird%29

• FCPX 'turns' MP4-XAVC-S in. MOV on import

  Hello

  I tried to import some media (recorded on a Sony a6000) XAVC-S in the final cut when I noticed something odd.

  If I import media directly from the map, FCPX "turns" the media in. MOV files. If, on the other hand, I move MP4 XAVC-S (only the.) MP4 and not the. XML files) then it is important as long as not MOV and MP4. Anyone know what is happening and what is recommend it import method (for better quality)?

  In both cases I chose "copy to library" and has not chosen any transcoding, analyzes the keywords or audio/video.

  I'm working on FCPX 10.2.3.

  This is the correct behavior. When you import from the map, or better out of an archive of the camera, the media are re-tensioned for QuickTime. That's what you need to do. Do not use the MPEG-4 files.

• Satellite C650D - is slow on dial-up connection

  The only thing that I downloaded on the computer is Microsoft Word and I set up an email for my daughter (it is his birthday present!) we're on dial-up, so I know it will be slow but crikey, it's ridiculous. My own desktop computer Windows XP (2and a half old) is faster than that on dial-up. There must be something I'm missing here?

  I have the external modem for my dial connection and obviously works, all advice out there? I thought that the purchase of a laptop computer at a reasonable price would be a sinch. Just plug in and go hmmm. Not happy right now that I can't work it out, any link online I takes forever to download, and I went online at all hours just in case of use by consumers.

  Hi auntysooty,

  Just be sure: you mean only the dial-up connection that is slow or the whole notebook?

  In my opinion, every dial-up (modem) is slow because most of the Web sites have several graphics and a large number of media files.

  Don t know what say, but you can try to update the driver for the modem. You can download the latest version at the official site:
  http://EU.computers.Toshiba-Europe.com

• HP Media Center M7690N: upgrade network adapter Gigabit - what card to replace the product to install

  Hi, this could be a long post for something simple then I apologize in advance.

  I recently updated my cable modem, router wireless at HQ and 150mbps broadband internet services. Came and went with the support technique of ISP and modem manufacturer and max results with speedtest I can get up to 92mbps. Seems that everything goes well on their ends. Not sure, but I suspect the 10/100 network adapter is my limit. So I bought a PCI Gigabit card and now I don't know what location to use. There is a dial-up modem connection in a slot and a wireless local area network (that I don't need) card in another. I thought I'd be able to recognize what PCI slot to use if there is a connector cable ethernet to one of the cards, but no. The ethernet connection is on a frame connected to the motherboard... so I was wondering if someone would have an idea to which PCI slot to swap? The Dial-up modem card or wireless Lan slot? Or is the network card built into the motherboard?

  I learned that the peak of out to something like 130mbps PCI slots so I'm not expecting to get all the way to speed 150mbps broadband, but I would like to get as close as I can. And hope I'm on the right track with change of the network card.

  Last year, I improved the two 1 TB hard drives each in a Raid? stripped configuration, maxed out at 8 GB memory and added new Windows 7 Ultimate 64 bit. The little girl runs really well. I just wanted to give my trusty HP one more push.

  Any idea would be appreciated... Thank you very much.

  BK-

  I'd rather have an insightful dialogue than to have to ask you some questions.

  You motherboard has 3 PCI slots.   Update external wireless modem does not help you support system that the internal Wi - Fi card does not match his speed, it's an old map of Wireless LAN 802.11 b/g.  The remote access card is actually a 56K bps modem data / fax, useless, unless your in Fax?  According to the HP website, you also have a PCI TV card (you do not have to mention)?

  (1) if the Fax is not used, remove the card. Use this location.

  (2) the old wireless card is now useless.

  (3) be aware you will lose Media Center if you ever upgrade to win 10 and many more.

  Well, you did ask!  Treat the daughter of old nice. You have until 2020 to Jan.  Read this also. Fun.  

• Qosmio F30: How-to: Manual Installation of Windows Xp Media Center Edition 2005

  Manual installation of Windows Xp Media Center Edition laptop Toshiba Qosmio F30 computer 2005
  Last updated October 3, 2006

  Important notes before starting:

  1 - the steps used for "Toshiba Qosmio F30" and for others models Qosmio that comes with "Intel Centrino Duo" Cpu and Xp Media Center 2005 installed.

  2. apply these steps if you have previous experience in the installation of Windows Xp, if you have that experience, then you can use the provided recovery CD to restore your system.

  3 - Windows Xp Media Center Cd is not provided with your laptop, if you have the Cd you can purchase from many online shops and in this case you will get the product key valid Windows Xp which you'll not need (because you already have one, you will find in it a small sticker on the back of your laptop and you can activate your Windows with it).
  In other words (you need for the first and the second Cd of Windows Xp Mce 2005 SP2 Oem).

  4. do not try to implement these measures on the other Versions of Windows Xp, use "Windows Xp Media Center Edition 2005 Sp2 Oem" only

  5. you must have the Usb floppy drive to install "Toshiba Raid Controller", it can be installed that by having the driver on a floppy disk and pressing F6 during the setup of Windows Xp, if you do not install the Raid driver then will Windows Xp does not recognize your hard drive.

  6 - notice of disclaimer
  I don't will not be responsible or liable, directly or indirectly, for any damage or loss caused or allegedly caused by or in connection with the use of this site or its content, including but not limited to delays, omissions and inaccuracies in content.

  Steps to follow:

  1 create drivers Cd of "Toshiba help utility", you should see the Toshiba help icon on the desktop, and then in the Toshiba help choose the "protect & difficulty" tab, you will find the Option ' create drivers & tools Cd "and insert a Cd Virgin to write to this
  "If this Option did not work, then you must install the restore Cd to get this job", the drivers are installed in a folder called Toolscd in the C:"" drive. To install your recovery Cd Power on your laptop and the "F12" hold and use the arrow keys to select the icon of the CD to boot from the Cd.

  2. create the Toshiba Raid since the driver Cd driver, the Toshiba Raid driver must be added during the Installation of Windows XP when they are asked to "Press F6 if you need to install a third party SCSI or Raid Driver".
  To do this, insert the Cd of ' Windows' drivers, it will run automatically or Run "Browser.Exe" inside the Cd The 'Raid Driver' and click on Select 'Installation', it will show you the Raid driver files, insert A Blank Floppy and copy the files in The Floppy 'To be sure that all the files be on the root of The Floppy' or to download the Toshiba RAID driver from the Toshiba web page download driver and extract the file zip on a diskette. Yet once, all files must be at the root of the floppy disk not in a folder"

  3 - Connect your Usb floppy drive and insert your Cd of Windows Xp Mce 2005 1 turn on your laptop Hold "F12" and use the arrow keys to select the icon of the CD to boot from the Cd.
  When you get the Message «Press any key to boot from CD...» ", press a button, if you do not press a key, it does not start from CD-ROM, press F6 when prompt to 'press F6 if you need to install a third party Scsi or Raid Driver".
  The Setup program continues until you are asked if you want to "S = specify additional device. Press' and specify the driver Toshiba Raid for Xp. press "enter" to continue with the Installation.
  Do not upgrade your Installation of Xp, start new Windows Installation and Partition on your hard drive, Windows Installation will be ask you to insert Cd 2, and will copy some files and will ask continue you to insert Cd 1 once again, with the installation until Windows finish the installation of the.

  4 - after Windows finishes the Installation insert the Cd drivers and select "Microsoft Updates" from the Drivers Cd click 'Installation' button, click on "Qfe" and ONLY install the following updates (don't let the updates restart your PC until you have finished installing all of the updates)
  A Q896256
  DIFFICULTY 'computers that are running Windows Xp Service Pack 2 and that are equipped with multiple processors that support processor power management features may experience decrease in performance'
  B Q910437
  DIFFICULTY 'High Hit Count Watson Crash in Wu Client '.
  C Q889673
  DIFFICULTY "Hardware (Dep) - computer activated may quit unexpectedly after recovery from sleep mode or hibernation in Windows Xp Service Pack 2"
  D - Q896243 (very Important, this will make SD and MMC cards for work)
  DIFFICULTY "ADD Support high-speed SD card"
  Other updates are not required to install, because you will install it later when you run Microsoft updates website updated Microsoft after finishing to activate your Windows.

  5 - Download and run "Intel Chipset Software Installation Utility' of the Intel Web site
  (Restart your PC after Installation)
  Do not install "Driver Chipset" since the drivers Cd, this is an old Version, try installing the most recent from the link above.

  6 - install the "Display Driver" of the Cd of drivers (no need to reboot).
  Note: To avoid annoying Messages to drivers during Installation to do the following: -.
  Go to control panel, system, Hardware, player signature properties, select "ignore - install the software...". »
  Go to control panel, system, hardware, Windows Update properties, select never 'search Windows Update for drivers'

  7. now you must configure your Internet connection and activate your Windows so that you can run "Windows Updates" from the Microsoft Windows Update Web site
  Your Internet may need one of the following drivers (depending on your Modem)
  A if you your Internet through LAN then install the 'network' of the driver Cd driver.
  B if you your grace wireless Internet then install the wireless network driver "" of the driver Cd.
  C if your Internet via USB then install the driver provided by the manufacturer of your Modem.
  D if your Internet through Dial-Up connection and then install the "audio driver" driver CD, this driver will install the audio driver and activate the Modem device and a Message appeared "find new hardware, peripheral Modem" ignores the Message and restart your PC then install "Modem Driver" of the driver Cd.

  8. now, go to the Windows Update Web Site and install all required updates "try to run Windows updates several times until you install all updates, because initially, Web site will updated Windows Installer 3 files only after this restart, your computer and go to the Windows Update Site again and continue to install updates. ", select the custom updates and install all critical and optional updates to date."

  9 - install "Common Modules" of the driver CD this module is an essential component on Windows XP systems, it is necessary to other original programming TOSHIBA works correctly.

  10 continue to install the other drivers and Utilities CD of drivers, but do not install the drivers following: -.
  Atheros Client Utility "no need".
  Bluetooth Monitor "do not install, install only the"Bluetooth Stack".

  Enjoy your PC powerful Qosmio Toshiba laptop.

  Hi Reaver, thanks for the installation instructions wonderful. I think that you have contributed to many users here.

  Ciao

• Cannot use the XAVC clips in AVID

  Hi guys,.

  last week, we had a few images with our new F5. We recorded in the XAVC format both in IMX50.

  Wanting to scan on our AVID MC6.5 it the clips IMX50 did well, but the XAVC clips were not recognized, even if it has been installed the new plugin PDZK-MA2.

  I tried several options:

  -Link WADA: clip appeared in my sandbox, but clicking on it gave due to error in the Viewer: CORE_CONSISTENCY_CHECK_FAILURE and SWDecodeCvtr::ExecuteRequest() CONSISTENCY CHECK FAILED.

  -Clip import: I imagine that only the WADA is possible for XAVC binding, but I tried to import and got following error: Exception: MXFImport: unrecognized XDCAM - resolution.

  I tried several settings of project: 1080i/50, 1080 p/25, 720 p/25, but all with the same results.

  Additional information:

  Workstation: HP Z400_V2, Windows 7 Service Pack 1

  Thank you for your help.

  What is HD or 4K XAVC? The 4K is not currently supported. Avid does not have any native 4 k. We are able to work with 4 k Raw, because with the help of our first AMA Avid plugin does an extraction k 2 k or 1 as soon as the files are linked, without having to first decode each clip in its entirety. We cannot do this with Avid codec files will first have to decode all the videos that would be cripplingly time CPU. We recommend that you use daily Express or Resolve or another compatible system daily to create DNX files for editorial for 4K XAVC.

  If it is HD XAVC, can you confirm that you are using Media Composer/Symphony 6 or 6.5 with MA2 v 2.31 installed? If so, post the link of the AMA you see at least the first image to drop you the clip in the source monitor Panel? The error seems to or otherwise related to the system memory. If you quit / relaunch Avid this will release any Avid system memory could not have released other recent operations. You can try this?

  You are right in that the XAVC clips must be bound to the WADA. XDCAM 50 can be linked to the WADA or file--> imported according to the needs...

  If none of the above brand success please let us know how much RAM you have on the system and format/pace of the clips you are trying from the WADA.

• On the Sony FDR-AX100 is there any CODEC or that he plans for people who leave the AVID Media Composer 8.3

  There are so many CODECs SOny cutting that help the AVID to read the files directly, however, nothing for this new type of XAVC S 4 K files. I know that I can work around, to convert files, but is not effective.

  Hi accessvideo,

  Welcome to the community of Sony!

  Thank you very much for taking the time to share your concerns with us. Sony takes the voice of our customers very seriously and heard all the feedback - good and bad is important to us. I forwarded your comments to our head of our investment in the media because she is always grateful for this type of feedback. While our media plans are confidential, I can tell you that Sony highly values our customers and their opinions and we do not want to get away from our brand.

  If my post answered your question, please mark it as "accept as a Solution. Thanks_Mitch

• I'm unable to display links to an online class in Media Player, says I need to configure the proxy settings

  I'm the unab to display links to an online class. Media Player opens, then he said that I need c alter my internet proxy settings. What should I do?

  Hello

  What is the exact error message when you try to open links through Windows Media Player?

  Check your proxy server settings and check if that helps.

  (a) on the Tools menu, click Options and then click the network tab.

  (b) check your settings in the Streaming proxy settings area.

  Notes:

  ·         If you don't know what your proxy server settings should be, on the network tab, select a Protocol, click on configure and select

  ·         Automatically detect the proxy settings or use the proxy settings of the browser (available for HTTP protocol only).

  ·         If you are connected to the Internet via a dial-up connection, you may not be able to choose the proxy server. For more information,.

• Windows media player cannot play the file because a network error occurred

  I try to open the media player it shows cannot play the file because a job net occuerred Server error might not avaliabe verfiy net work-related and your proxy settings

  Hi, Rejeevthomas,

  Click on the Tools menu, click Options, click the network tab and check your settings in the Streaming proxy settings area.

  If the Tools menu is not visible, press CTRL + M to display the Classic Menus.

  Notes

  • If you don't know what your proxy server settings should be, on the network tab, select a Protocol, click on configure, then select Autodetect proxy settings or use the the proxy settings of the browser (available for HTTP protocol only).

  • If you are connected to the Internet via a dial-up connection, you may not be able to choose the proxy server. For more information, see your ISP (ISP) or your network administrator.

  http://www.Microsoft.com/windows/windowsmedia/player/Webhelp/default.aspx?&mpver=11.0.5721.5145&ID=C00D11B3&ContextId=71&OriginalID=C00D0006

  Try the following:
  http://support.Microsoft.com/kb/932756

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-windows_programs/Windows-Media-error-message-c00d11b3/f64147d4-51dB-41D9-812F-59d9caf0ef54

• Windows Media Center, download Guide Erroe Code 3

  My Media Center does not download the info guide, claims error Code 3

  Hi susanne1,.

  1. did you of recent changes on the computer?

  2. do you have security software installed on the computer?

  3 when was the last time it was working fine?

  Check and make sure that the background intelligent transfer service is running on the computer.

  (a) click on start toreduce this includes this image, type services.msc in the Search box type services.msc in the dialog box

  (b) right click on the background intelligent transfer service, and then click Properties.

  Ensure that the service status is started and the type of service is automatic.

  Errors download Media Center and guide the suggested corrections

  http://blogs.msdn.com/b/astebner/Archive/2005/11/08/490466.aspx

  Sometimes, Windows Media Center would not be able to download Guide data. In general, this happens for the following reasons:

  (a) your computer is not connected to the Internet or there is a problem with your Internet settings.

  (b) If your computer connects to the Internet by using a dial-up connection, make sure that the connection is properly configured. For more information about setting up a dial-up connection for use in Windows Media Center, see solving problems with an Internet connection.

  (c) the Guide Server is not available or is temporarily out of service. If the Guide Setup was already complete, Windows Media Center will try to download it again daily.

  (d) the Guide service provider didn't Guide your location information.

  Troubleshoot Guide downloading problems in Windows Media Center

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-guide-downloading-problems-in-Windows-Media-Center

  I hope this helps!

  Halima S - Microsoft technical support.

• Dial-up access is connected, but Windows Vista says it isn't.

  Well, I connect to my Dial-up connection and it connects to the internet, but it is extremely slower than it was.  Even if I'm networking Windows Vista connected icon, (computer two on the start to the right bar) has a X on it and when I pass the icon it says: "You are not currently connected to any networks." Now consider this issue further away, I'm heading on in the center network and sharing-> manage network connections-> right click on my connection Dial - up-> State.
  These are the results of Word for Word:

  Connection:
  IPv4 connectivity: Not connected
  IPv6 connectivity: Not connected
  Media state: connected
  Duration: 00:44:33 (important)
  Speed: 9.6 Kbps (Also important)

  However, that's my theory and I ask you guys if I'm wrong or not.  Because my connection is not actually connected to IPv4 and IPv6, it is extremely slow.  Still more slowly than usual Dial-up that's been frustrating me and my family for quite awhile.

  Is there any solution for this?  I'm not using a modem and the phone jack is connected directly to the computer, I checked the wires and I'm sure they're fine.

  All,
  Here are some steps to you all try to fix your network connectivity issues.  Some of you may have tried some of these steps, if so, just do not take into account.  Because there are several people involved in this thread, now I want to put all the possible corrections for the loss of connectivity.

  Network connection problems:
  http://windowshelp.Microsoft.com/Windows/en-us/help/33307acf-0698-41ba-B014-ea0a2eb8d0a81033.mspx

  To reset the stack TCP/IP go to this article and either click on "Fix it for me" or follow the instructions to fix it yourself:
  http://support.Microsoft.com/kb/299357

  Disable the IP helpdesk:

  1 hold the Windows key and type R, type "services.msc" (without the quotes) and press enter
  2. scroll down to the IP assistance service, right-click on it and select Properties
  3. in the drop-down list box that says "Automatic" or "Manual", set it to disabled and then click 'apply '.
  4. then click on "Stop" to stop the service from running in the current session
  5. click on OK to exit the dialog box

  Disable IPv6:
  Try to uninstall IPv6 on all interfaces, the removal of virtual cards of IPv6 and reset the TCP/IP stack.  To remove the IPv6, go to the properties for each network adapter, and deselect the check box next to the Protocol "Internet Protocol version 6 (TCP/IPv6), which will turn off, or select it and click on uninstall, which withdraw power off the computer.»  Then go into Device Manager and remove any 4to6 adapters, adapters miniport WUN or tunnel adapters.

  NOTE: You should do this for each network connection.

  Disable the DHCP Broadcast Flag:

  Link: http://support.microsoft.com/default.aspx/kb/928233
  Important this section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:
  322756 (http://support.microsoft.com/kb/322756/ ) how to back up and restore the registry in Windows

  Windows Vista cannot obtain an IP address from certain routers or some non-Microsoft DHCP servers
  To resolve this issue, disable the DHCP BROADCAST flag in Windows Vista. To do this, follow these steps:
  Click Start, type regedit in the search box, and then click regedit in the list programs.
  If you are prompted for an administrator password or for confirmation, type your password, or click on continue.
  Locate and then click the following registry subkey:
  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\Tcpip\Parameters\Interfaces\ {GUID}
  This registry path, click the (GUID) subkey that corresponds to the card network that is connected to the network.
  On the Edit menu, point to new, and then click DWORD (32-bit) value.
  In the new area #1, type DhcpConnEnableBcastFlagToggle and press ENTER.
  Right-click DhcpConnEnableBcastFlagToggle, then click on modify.
  In the value data box, type 1 and then click OK.
  Close the registry editor.
  By setting this registry key to 1, Windows Vista's trying to get an IP address using the BROADCAST flag in DHCP Discover packets. If that fails, he will try to obtain an IP address without using the BROADCAST flag in DHCP Discover packets.

  To clear the DNS cache:
  Click Start, type cmd in the search box, and then click cmd in the list programs.
  If you are prompted for an administrator password or for confirmation, type your password, or click on continue.
  Once at the command prompt, type ipconfig/flushdns

  Please post back and let us know if your problem is resolved or not.
  Thank you

  Gloria
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.