523__Media event Center Extender Setup failed to 120 step.

Similar Questions

• UPnP search fails when adding Xbox 360 Media Center Extender

  First of all, I spent a week looking for a solution to this so if I missed something obvious, I apologize.

  My xbox has been connected as a media center extender to this combination of the computer and the router for several months now. The router is a WII-HP-G300NH Buffalo. Earlier this week the media center extender was having video playback problems. After restarting the computer, the Extender was is no longer connected.

  When I try to add a new extension unit I get the message "unable to add extender. Microsoft says to activate upnp and multicast. Check. Reflashed firmware dd - wrt. No luck. Back to buffalo firmware. No luck. Try an old Linksys WRT54GL I hang out. No luck.

  The event recorder has this error: "Media Center Extender Setup has failed as the Extender has been detected on the network unsuccessfully searching for UPnP for the Extender (timed out after 20000ms)." Event ID: 538

  Now, I did everything I could find on the activation of network discovery, anything allowing to access media and these. Network and sharing Center is located about large open. I also tried switching between home and work networks.

  That said, I decided to check and see what updates have been installed. It turns out that an update has been applied on the day, that I started to have problems. It is said that it can not be uninstalled. Description Windows 7 and Windows Server 2008 R2 installation software item updated

  Note: I have no system restore points. Small SSD and has not taken the time to understand how to save elsewhere.

  That's all the information I have. I convinced myself that it is not the router via the steps described above and that it is something to do with the computer. Help?

  FIXED.

  Reinstalled NIC drivers.

• Xbox 360 Media Center extender 545 error code

  Hello everyone I thought I'd ask my question here as nowhere else.

  The problem is, my xbox 360 has benn works fine it's just the media library.
  Whenever I try to add as an Extender happens to the part where it sets up my xbox and it says error and it can not set up my computer. So far, I have tried the part where you remove certificates and restarted some Services, but none of them worked.
  Under Event Viewer, he said
  Media Center Extender Setup cannot create an account for the extender with the ID: uuid:10000000-0000-0000-0200-0022483530EF.

  
  

  Error: The system cannot find the specified file.

  If anyone can help me with this, it would be appreciated muchly, Spudals (Jake)

  PS. IM passing by a N1 Vision Wireless router, it worked before, so I don't think it's important.

  PPS. I tried on another laptop and it worked fine, this laptop also had windows 7.

  Hi Spudals,

  Welcome to the Microsoft answers site.

  I suggest that you allow the default Administrator and try to set up the media center extender, follow these steps:

  To activate the default Administrator account, follow these steps:

  1. Click Start and type CMD in the start search box

  2. right click on CMD in the list and click "Run as Administrator"

  3. type the following command: net user administrator / Active: Yes

  http://social.answers.Microsoft.com/forums/en-us/w7security/thread/67922948-62b9-4AC0-ba1f-12e9454d231b

  If the problem persists, you can try to create a new user account and the extension of configuration and check, if it works fine, then it could be a problem with the user profile, follow the steps in the link:

  Difficulty of a corrupt user profile: http://windows.microsoft.com/en-US/Windows7/Fix-a-corrupted-user-profile

  Check out the links below and try to set up the Xbox as of Media Center Extender.

  http://www.Microsoft.com/Windows/Windows-Media-Center/learn-more/Extenders/articles/Extenders-Xbox-overview.aspx

  Set up a Windows Media Center Extender device: http://windows.microsoft.com/en-us/windows-vista/Set-up-a-Windows-Media-Center-Extender-device

  Connect your console to the Windows Media Center: http://support.xbox.com/support/en/us/nxe/xboxlive/troubleshooting/NetworkHelp_mcxpc.aspx

  Enjoy Windows Media Center on the Xbox 360 with your music, photos, Live Recorded TV and online media: http://www.xbox.com/en-US/pcsetup/MCEWindows7.htm

   

  Windows Media Center with Xbox 360 media sharing: http://support.xbox.com/support/en/us/nxe/GamesandMedia/SharingMedia/MediaCenter/ShareMediaFromMediaCenterPC.aspx

   

  Demo: setting up a console Xbox 360 as an Extender for Windows Media Center unit: http://windows.microsoft.com/en-US/windows-vista/Demo-Setting-up-an-Xbox-360-as-an-Extender-for-Windows-Media-Center

  Solve problems with a Windows Media Center Extender device: http://windows.microsoft.com/en-US/windows-vista/Troubleshoot-problems-with-a-Windows-Media-Center-Extender-device

  You can also try to temporarily disable the security firewall and check.

  Also make sure that network discovery is turned on.

  Control Panel\All Control Panel Items\Network and sharing Center\Advanced sharing settings

  Make sure that network discovery is turned on.

  Swathi B - Microsoft technical support.
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Unable to setup windows media center extender

  Hello, I hope someone can help me. I'm trying to set up the windows media center extender to my xbox, but when it gets to step 3 on the PC, it comes back on the xbox game could not be started. I'm out of ideas.

  I have windows 7 on a wired connection

  I tried the new user account

  tour of the firewall

  uninstalled and reinstalled the media center

  delete the certificate.

  made sure I have all the updates

  you have any other ideas

  See if it helps: -.

  Solve this problem

• Sports Media Center section / channel fails

  Home Premium to Windows 7 (64-bit), the Sports Media Center Section / channel fails on HP E9200Z identical pc 2 I just bought, but my E9180T HP Vista pc works fine.  Initially the same sports section was not, then after that the TV Signal configuration appeared.  Now, when you take Sports, each sub-section does the following:

  We Now - works well

  On Later - it always shows "No Sporting events found."

  Partitions - it always shows 'Search'... "I left it there for hours?  Looking

  Players - a completely white screen.

  Leagues - it blocks the program then it restarts finally.  Message he shows is, "Media Center has stopped working", on the second attempt, the same thing happens, but it displays, windows searches for a solution to the problem, then "a problem caused blocking the program works correctly.  Windows will close the program and inform you is a solution is available. "and a close button the program if. poster, selecting just close the Media Center.

  My registry made this interesting:

  HKEY_CURRENT_USER\Software\Microsoft\Windows\Curiousy\Media Center\Settings\Sports

  (Default) - (value not set)
  LeagueSettingsSelectedLeague - white
  PlayersSelectedLeague - white
  ScoresSelectedLeague - white
  Version - 65537

  Not sure, everything started working on my pc, had to have a server down?  I think that data relies on a Fox Sports server, it works on my Vista upgraded to Win7 and pc my pc Win7 detroit, but also extended on all the...

• Xbox 360 Media Center Extender loses the connection to the media center to Windows 7 after change of router

  I have a Windows 7 Media Center box, and an Xbox 360 that I use as an Extender.  The two connections to the same wired router.  Everything worked fine until I went on my old router (failed) and put in a WNDR4300.   After the new router has been installed, I didn't have the Extender work then, deleted from the media Center and re - he added.  It worked but after I shut off/started the xbox, no link.  It is repetitive: I can make a new connection, but then it didn't reconnect after reboot of the xbox.

  Check/change:

  -J' changed to a static IP xbox

  -There is no part 3 a / v or a firewall on the support center

  -L' on the media center network adapter is 'home '.

  -The network card on the media center * fact * show the xbox 360

  -The event log after the xbox is restarted shows:

  event ID 538: installation of media center extender does not like the Extender has been detected on the network, but for the Extender upnp search failed (timed out after 20000ms)

  -How long before it, I have found that the service IS running upnp device host (and set to auto)

  -J' checked 4300 router wndr and UPnP is enabled (advertising set to 30 minutes)

  question, any ideas what configuration will solve this problem?

  Hello

  I suggest to look and ask here:

  https://support.Xbox.com/en-us/browse/Xbox-360?XR=shellnav

  http://forums.Xbox.com/

  http://www.thegreenbutton.TV/forums/

  See you soon,.

  J

• 1290 error when you try to install Media Center extender for X 360 in Win7 Pro x 64

  OK, here's one for someone who knows Win7 Kernel internals.

  I am trying to connect my XBox 360 to my PC MC with Windows 7 Pro x 64. When I type the code 8 digits of the Xbox in Media Center, I get an error "Setup." Check the system error log, I found that it was a failure of the Media Extender service to start. Stop of is an error 1290, that says "service start failed because one or more services in the same process have a service SID inconsistent type parameter.» SID type has something to do with the core permissions or somesuch. WAY out of my League.
  The only thing that I could find online is that this error occurs sometimes in what concerns the time Service Windows, and that a registry edit to fix it. I tried a similar "fix" on this service registry entry, but it had no effect on this error, so I changed the return register.
  Someone has an idea of what I might try next? I did all the standard things that are recommended for problems of Media Extender, including uninstalling and reinstalling all components of media. Re-installation of Windows is NOT an option at this stage, this computer is used by all my children, and there would be a mutiny if he became unavailable for a long period of time (especially for as "lame" reason like this). I'd really listen to my media to my XBox. I hope that someone with some knowledge of the works of this service lies this question one day.
  Thanks for reading.
  "Bottom in Phoenix.

  Hi Ken Nichols
  You can perform the steps below and check them if they help you to solve the problem-
  Step 1:

  a. click on start toreduce this includes this image, type regedit in the Search box, and then click regedit.exe in the list of programs .

  If you are prompted for an administrator password or a confirmation, type your password, or click continue.

  b. Locate the following registry subkey and click on it:

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\Mcx2Svc

  (c) in the part of details, right-click ImagePathand then click change.

  d. in the value data box, type the following registry value, and then click OK:
  %SystemRoot%\system32\svchost.exe k fontcache

   

  e. make sure also that the ServiceSidType is set to 1.

  f. exit the registry editor and then restart the computer.

  EDITING REGISTRY WARNING:
  Important:  This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:

  How to back up and restore the registry in Windows: http://support.microsoft.com/kb/322756

  Step 2:

  a. open administrative tools by clicking the Start button, then Control Panel. In the search box, type administrative tools, and then click Administrative Tools.

  b. double-click on Services. If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.

  c. right-click on the Media Center Extender Service and then click Properties.

  d. on the general tab, next to startup type, make sure that automatic is selected.

  e. If the service is not already running, under Service status, click Start and then click OK. If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.

   

  I hope this helps.

• On component WIC Installer installation failure: [2] Setup failed on component WIC Installer DepCheck indicates WIC Installer is not installed. Error code 1603

  I HAVE DOWNLOADE .NET FRAMEWORK SINCE THE LINK FOLLOWING, BUT AN ERROR HAS OCCURRED DURING INSTALLATION...      Microsoft .NET Framework 3.5 and .NET Framework 3.5 Service Pack 1

  http://download.Microsoft.com/download/2/0/E/20E90413-712F-438C-988e-FDAA79A8AC3D/dotnetfx35.exe
  ERRORS SHOWN
  [12/31/11, 02:09:33] WIC Installer: [2] error code 1603 for this component means "Fatal error during installation.

  "

  [12/31/11, 02:09:33] WIC Installer: [2] Setup failed on component WIC Installer

  [12/31/11, 05:28:13] WIC Installer: [2] error code 1603 for this component means "Fatal error during installation.

  "

  [12/31/11, 05:28:14] WIC Installer: [2] Setup failed on component WIC Installer

  [12/31/11, 05:28:28] WapUI: DepCheck indicates [2] WIC Installer is not installed.

  [12/31/11, 05:32:22] WIC Installer: [2] error code 1603 for this component means "Fatal error during installation.

  "

  [12/31/11, 05: 32:23] WIC Installer: [2] Setup failed on component WIC Installer

  [12/31/11, 05: 32:38] WapUI: DepCheck indicates [2] WIC Installer is not installed.

  Hi faizanbokhari,

  Follow the steps in the article.

  You receive an "error 1603: a fatal error occurred during installation" error message when you try to install a Windows Installer package

  http://support.Microsoft.com/kb/834484

• Media Center extender on Vista Business

  I would like to see my vista media center content on my desktop (Vista business running).  Is there a way to make it act as an Extender?  The Media center is on the same network as my desktop computer and the only other extender is my XBOX 360.

  Thank you
  Chris

  Hello

  Welcome to Windows Vista community responses.

  You can check the link below to get an answer to your question.
  
  Set up a Windows Media Center Extender device

  http://windowshelp.Microsoft.com/Windows/en-us/help/8076aff3-16ec-4751-9F57-d36e0ff407201033.mspx

  Response please back and let us know if this helped with your question or let us know if you need more assistance.

  Kind regards
  Anthony
  Microsoft technical support
  Visit our Microsoft answers feedback Forum and let us know what you think.

• gc_w01_enu_nb.exe extracted from 100%, but Setup fails instantly in winxp pro

  gc_w01_enu_nb.exe extracted from 100%, but Setup fails instantly in winxp pro

  I try to install the full feature driver for my PSC 1315xi on two WinXP Pro PC.

  One worked perfectly.

  On the second, when I run the exe download, I get the message 'Extraction', but when he goes up to 100%, never open the setuup window.  And no error message is displayed.  I searched and found a log file which was produced.  It includes the following:

  GetValueByLang (f-> c_str(), _T (Version), _T (LanguagesInthisCD) failed "
  System LangID = 1033.  mapped to ENU
  # The system language is ENU, but is not on our CD!
  # We couldn't understand a language to use and return FALSE from CICECmdLine::GetLanguage()!
  # GetValueByLang (f-> c_str(), _T (Version), _T (LanguagesInthisCD) failed "
  Installer returned 1603

  Any help would be appreciated.

  I think I have solved this problem.

  I have a PC Windows XP Pro (SP3) who has been affected by this problem.

  Immediately after that the window of 'extraction' went to 100% and closed, nothing happened.  The windows install/never display software.

  Whenever I tried it creates a log file that started with this:

  "Parsed command line: «.\Setup.exe".

  Using datfile: C:\DOCUME~1\xxxxx\LOCALS~1\Temp\7zS1293\autorun.inf

  # GetValueByLang (f-> c_str(), _T (Version), _T (LanguagesInthisCD) failed "

  System LangID = 1033.  mapped to ENU

  # The system language is ENU, but is not on our CD!

  There was other error messages after that, but they all come from lines 3 and 5.

  Something she prevented the installation program to recognize the language ENU files ARE present in this download.

  Comparing two PCs, a problem, and one that works perfectly, I saw that one who was not was AutoRun disabled through a registry setting.  I temporarily deleted this registry on the PC that wasn't and Setup launched and ran like he was supposed to.  Here are the first of this log from the same PC, a few minutes later, where the only difference was that I had removed the registry setting criminalized:

  "Parsed command line: «.\Setup.exe".

  Using datfile: C:\DOCUME~1\xxxxx\LOCALS~1\Temp\7zS1293\autorun.inf

  System LangID = 1033.  mapped to ENU

  We use the system of language = FRA, which is located on our CD!

  As you can see, the message "(LanguagesInthisCD) failed" (line 3) disappeared, and the line 5 (now line 4) shows that it has to recognize that the language ENU installation files are present.

  So if you encounter this problem, and you are comfortable with the system registry, here is how I got it to work on my PC:

  Start regedit
  Navigate to the bottom of this tree
  -HKEY_LOCAL_MACHINE
  -SOFTWARE
  -Microsoft
  -Windows NT
  -CurrentVersion
  -IniFileMapping
  Below, find out if there is a key named "Autorun.inf".
  On my PC (the one with this problem) the value of this key has been "@SYS: nexistepas".
  If your registry database also has this, it may be the cause of your problem.
  In the left pane of regedit, do a right click on Autorun.inf and select "Rename" from the context menu.
  Change the name to something like "Autorun.inf.hold".
  Close regedit
  At this point, I restarted my PC, but I don't know if it is really necessary.
  I ran the downloaded driver file.  It extracted, and the Installer started out as it was supposed to.

  When it was done, I returned in regedit and renamed "Autorun.inf.hold" to "Autorun.inf".

  It is extremely frustrating for me, and (if you need it), I hope that this solution works for you.

• Netflix/media center extender

  I use windows vista Home premium with media center.  I have a linksys dma2200 extender connected to the media center for viewing in another room.  I have a netflix account and am able to view on my PC, but cannot show via the media center extender.  The silver light I to view Netflix on my PC.  When I click the icon of netflix on the Extender, he says that the application is not available on the media center Extender units.  Help!

  Hi 36109

  Welcome to Windows Vista answers Forums!

  First you can try to uninstall and reinstall Silverlight and check.

  You can try to uninstall Silverlight by downloading the Windows Installer Cleanup utility.

  Description of the Windows Installer CleanUp utility

  http://support.Microsoft.com/kb/290301

  Restart the computer after the uninstallation of Silverlight and install it:

  For more information, you can consult the following link:

  http://www.Microsoft.com/video/en/us/details/15804fbf-7657-45FA-971b-dd567615fa52

  Note: Some menus of Windows Media Center does not support third party commercial edition can influence the ability for the Netflix at Windows Media Center entry point to appear. If one of these utilities is installed on the machine, it is likely, it is the cause of the problem, and uninstall the tool does not always solve the problem.

  For more information, you can consult the following link:

  http://social.answers.Microsoft.com/forums/en-us/vistamedia/thread/00f7805d-4e5f-41F4-b968-055528283ef9

  Hope this information is useful.

  Jeremy K

  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• How reset/uninstall media center extender on XBOX

  After graduating with a repaired XBOX back I had to add the Extender. Everything was going well with no error. However, only 3 of my home movies are now rather than the 33 that are on the media center. Is there a way to reset the Extender on xbox or delete it if I try to reinstall to see if that fixes it?

  Solve problems with a Windows Media Center Extender device

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-problems-with-a-Windows-Media-Center-Extender-device

  To uninstall the Xbox 360 and remove the Extender connection

  http://Windows.Microsoft.com/en-us/Windows-Vista/use-a-Windows-Media-Center-Extender-device

  S.Sengupta Media Center MVP

• How do you play dubbed audio or subtitles in Windows Media Center Extender (Xbox 360)?

  I know how to turn subtitles on my Windows Media Center PC, but there is no option to select audio dubbed or subtitled when you use Windows Media Center Extender. All my video files contain subtitles and audio dubbed foreign films.  My wife loves Spanish subtitles, because she has trouble understanding some English films.  I searched some forums and there are questions there but they have no definitive answers.  How a company billions of dollars developing a Media Center and leave out or miss crucial features like these? Please do not react with the thread on how to activate subtitles in TV Mode. Which does not apply to this question. The key word is EXTENDERS.

  Hi AnthonyWilson5

  Subtitles should be coded in the movie view. These subtitles are automatically playing with video files. If the subtitles are a separate .srt file, then you will not be able to visualize everything by watching a video on the 360. There is no real turn option ON or OFF for subtitle in the Xbox 360.

  But for more information you can even try to contact the expert Microsoft Xbox 360 team. Please visit the links below to find a community that will support what ask you in the right direction for Xbox 360.

  http://forums.Xbox.com/

  I hope this helps.

• Windows media center extender will not play all my mp3

  I used to listen to music from my pc to my xbox recently just windows media center extender. but when I play certain songs, I get an error that says: an error has occurred and may not play a few songs, but some of my other songs play fine. When I went to look at my library, I noticed that some of the songs had a yellow padlock in front of the icon. I looked through the properties and could not understand anything the thing he looked the same as a normal file for me. any ideas?

  Looks like that the songs can be protected by DRM (Digital Rights Management). You are able to play the same songs with Windows Media Player?

  Codecs: Frequently asked questions
  http://Windows.Microsoft.com/en-us/Windows7/codecs-frequently-asked-questions
   
  http://Windows.Microsoft.com/en-us/Windows/downloads/WMPlugins
   
  http://Windows.Microsoft.com/en-us/Windows7/open-the-playing-audio-troubleshooterOpen

  Releasing it's easy: with Windows | ActiveWin | Laptops | Microsoft MVP

• Media Center Extender and xbox - version question

  I've been recently using WMC TV recording, but I can't get the message to my TV. I think of buying any old Xbox console to get the Extender. -I really hate on the games-just the Extender. Is there a certain version of the Xbox that I have Extender? Thank you.

  Hi Dean,

  Thanks for posting this question in the Microsoft Community.

  You can go through the article to learn more about setting up a Windows Media Center.

  If you have an Extender that worked with Windows Vista, it should work with Windows 7. For example, the Xbox 360, which includes the built-in Media Center Extender functionality will work with Windows 7.

  Former dilution models that have been developed for use with Windows XP Media Center Edition 2005 do not work with Windows 7. I suggest you to be sure to read the fine print on the expansion box before you buy.

  Hope this information was helpful and let us know if you need assistance in the future. We will be happy to help you.