5610 HP all-in-one

Similar Questions

• HP all-in-one 5610 model: All in One 5610, problem loading new software for Windows 8.1

  Hi, just bought new HP computer with 8.1 widows, my all-in-one 5610 has been working fine on the old Windows XP.  Installation of new software 8.1 system HP I get unknown device (configuration descriptor request failed). As for the USB controller get Windows has stopped this device because it has reported problems Code 43. Thnks for any help you can give.

  Hi @Joe62 and welcome to the Forums of HP!

  I understand that you get code 43 error. I'd be happy to help you!

  I recommend to check this page from Microsoft on Code 43: Windows has stopped this device because it has reported problems.

  Good luck and please let me know the results of your troubleshooting operations. Thanks for posting on the HP Forums!

• Officejet 5610: Printer all-in-one Officejet 5610 laptop

  Until yesterday, I had the printer all-in-one HP Officejet 5610 installed on my PC (Windows 7). Now he's disappeared! When I try to install a new driver, it seems to download and install, but I'm not and it does not appear in devices and printers.

  Hi @Casona,

  Welcome to the Forums of HP Support! I see by your post that the printer does not appear the window devices and printers, even after reinstalling the software. I would like to help you today. If this helps you to find a solution, please click on the button "Accept as Solution" down below in this message. If you want to say thanks for my effort to help, click on the 'Thumbs Up' to give me a Kudos.

  I would say to restore your computer to an earlier time when everything worked correctly, System Restore for Windows 7

  Please let me know the results and if there is anything else I can help you. Thank you.

• Since the feeder fax fails but OK to flat bed. 5610 HP all-in-one

  Hello. I asked this question before. I have a HP Pavillion and OfficeJet 5610, Windows 7. I have updated the software and drivers to work with Windows 7. The fax function always works from the flat bed. It never work if I load the source in the sandbox, even if only the page. I'm puzzled. Anyone have any ideas?

  Thanks for your help!

  Hopken

  Framework of the moderator is to make sure, that there is no personal information in posts.  This includes the last names, phone numbers and serial numbers.  This is done to protect your privacy.

  I did, however, get to see the report.  Try to turn off Mode of Correction of errors (ECM) and change the speed in the middle.  Try to send a fax.  If this does not work, change the speed to slow down and give it a try.

  Phone line the printer is connected directly to a wall outlet (no separator)?

• HP office jet 5610 xi all-in-one broken glass in scanner

  Is it possible to replace the 5619 xi office jet scanner glass?

  Hello

  The scanner glass is not a replaceable part on printer 5610.

• all-in-one Officejet 5610: cannot scan

  I am trying to scan on my officejet 5610 all-in-one and I get an error insall for windows 8 or 8.1.  Help please.

  Hello

  Please download and run the following tool and post back all the error messages:

  http://ftp.HP.com/pub/softlib/software13/COL50849/MP-145514-6/HPPSdr.exe

  Kind regards.

• All-in-one Officejet 5610: lost all ability to scan after operating system upgrade

  Hello

  First post.

  Tried to implement everything. Need for new perspective or someone just told me that the printer/scanner is not taken in charge any longer.

  Recently updated to OS 10.8.5 as well as extra memory.

  Have scanner only for the work of the company.

  The scanner just stopped working after update of HP software. I don't remember version. Nevertheless, today I removed all HD and started around, but nothing works.

  Start over means, I downloaded a new driver and the patch.

  Using a HP scanning Application. Now that the application does not appear even on the computer.

  Let's start with some basic questions and then go from there:

  Neither HP or HP scanning Application utility are now on the hard disk after you follow the instructions from HP to delete.

  What I need the original disks and to reinstall the software from it or can those be online?

  Thank you.

  Mike

  Follow-up.

  Tried this approach (see link), but the all-in-one Officejet 5610 is not listed. I suspect the printer/scanner in is no longer supported?

  THX!

  http://www.MethodShop.com/2013/12/HP-utility-install.shtml

  Second follow-up:

  I understand how to use of Apple's Image Capture application as a workaround. Not as friendly as HP Scan.

  Unless someone can tell me the HP and HP Scan utility always work in OS 10.8.5 for the 5100, I guess that will be sufficient.

  Thank you.

  Hello

  For Mountain Lion, your printer software is provided via Apple Software Update.

  Follow the steps below under "Use Apple Image Capture" to scan with the Officejet 5610 on your operating system:

  http://support.HP.com/us-en/product/HP-OfficeJet-5600-all-in-one-printer-series/441142/model/441144/document/c04788799/

  If you are having problems scanning, be sure to follow these documents to install the latest drivers from Apple Software Update:

  http://support.HP.com/us-en/product/HP-OfficeJet-5600-all-in-one-printer-series/441142/model/441144/document/c04510394/

• 5610 all-in-one - black thick top of line down on the pages scanned using the scan feeder tray ONLY

  Using HP Officejet 5610 all-in-one I've had for years and maybe 6 months ago, I noticed that anything that is analyzed by the load plate (if you need to scan a bunch of pages without having to analyze each page individually between analyses what is tedious that need constant attention) has this thick black line goes up and down on the middle left of THE pages scanned. Honestly, it looks really bad like if there is something hidden in this terrible line through the process of moving the paper through the feeder, BUT the original is just fine without damage.

  If I scan just a page by placing the document on the scanner glass, and then NO matter whatsoever.

  100% reproducible every time.

  So I know that it has nothing to do with the glass (which is clean), but only when the scanned document must pass through.

  Checked the forums for similar problem and found no exact match.

  I imagine that an expert out there knows the answer to that high hand. IF you could speak up, I would appreciate it.

  I THOUGHT ABOUT IT!

  I read another post:

  http://h30434.www3.HP.com/T5/scanning-faxing-and-copying/HP-OfficeJet-Pro-8500A-plus-vertical-black-lines-only-when/m-p/1391261/highlight/true#M30268

  who is mentioned on opening the ADF cover. Well I opened the whole Assembly, having absolutely NO idea how it all works, and I found a 1 "x 8.5" thick mirror (for lack of a better term) who had what looked like white paint on it to the place where the pages were probably getting the black line. I scratched, retested and the question was gonzo - that's all!

  Then my wife just told me that she thinks that she knew what the problem was all along. She had put on a page and it had not dried, and she tried to put it in the charger to make a copy. She just thought that we were going to replace the printer even when and if ever, let me know. During this time it was me mad for months. What are you laughing at me? This all-in-one works very well for years - replace without good reason, must learn a new product, get new cartridges, out the same old, same old, NO way. If it is not broke, do not replace it!

  Detective Conan.

• All-in-one Officejet 5610: function Scan lost after upgrade to Yosemite

  Lost the ability to analyze after upgrade, print, and copy works. Have already done everything suggested by Double-U-di in the Mac OS 10.10 post Yosemite and HP Printer Support posted on 30/10/2014: checking for updates Apple, printer removed from the queue, add printer back, reset the printing system, removed the HP software, repair disk permissions * manually installed HP printer drivers v3.0 and added to the queue printer. No change, printing & copying ok, but the scanner does not.

  During approval of the repair disk found a number of problems related to printing and presumably repaired, had more to do with the ' should be 80, group is zero ", but others as well.

  Anyone know what I can do, short of buying a new printer? I realize, it's a dinosaur - always attached via the USB port, but she worked just beautifully before the upgrade.

  Hello @DrBucky,

  Welcome to the Forums of HP Support!

  I understand that you are not able to scan from your HP Officejet 5610 all-in-One Printer to your computer Mac OS X 10.10. I would like to help you to solve this problem today. Thank you for all the troubleshooting steps you tried before reaching out for support. You have completed almost all of the recommended steps. However, the order in which the steps have been completed can cause some problems. Therefore, I will be having repeat you some of these measures to ensure that the appropriate driver is being used.

  Step 1: Reset the printing system and uninstalling the driver:

  It is crucial for the repairs we have a clean slate to work with. Therefore, I'll take you reset the printing system and Uninstall the drivers for your HP Officejet. Please click here for instructions on how to perform the reset and uninstall. Once the site opens, select the drop-down list for 'Mac OS X v10.6, OS X v10.7, OS X v10.8 and OS X v10.9'. Then, please follow the steps in the method 1 and method 2.

  Once steps have been taken, please proceed to the next step.

  Step 2: Check and repair your Mac disk permissions:

  It is very important to perform the audit before the repair. By running the check first, questions are found. Once all questions are found the repair process will correct these problems. By repairing just without checking first, questions may be missed.

  1. Open Macintosh HD and go to Applications
  2. Go to the Utilities folder
  3. Open disk utility
  4. Select the hard disk volume, you use (usually on the left)
  5. Select verify disk permissions
  6. Once this process is complete, select repair disk permissions

  Step 3: Manually install the driver Package:

  Please click here to manually download the package from Apple to HP v3.0 printer driversupdate. Once the site opens click on the download button at the top. Follow the instructions on the screen to install the driver package.

  Step 4: Check the Apple updates:

  1. Go to the Apple
  2. Select System Preferences
  3. Select software update
  4. Click update now
  5. Install your available updates
  6. Computer restart

  Step 5: Add the device:
  

  1. click on the menu of Apple , then Preferences System.

  2. click on Print & Scan and then check if the name of your printer appears in the printer list.

  3. click on the name of your printer, click the sign minus (), then remove the printer.

  4. click on the plus sign (), click Add a printer or a Scanner, click the name of your printer.

  5. click on the area of use or with the help of Print and then select the name of your printer on the shortcut menu. Ensure that the Officejet driver is selected.

  

  6. click Add to add the printer to the list.

  -Source

  Once your printer is properly added to, please try to scan the image. For instructions on the three supported methods of scanning without HP software please click here. The support document indicates that it is for Mac OS X 10.8 but the steps are the same for Mac OS X 10.10.

  Please let me know if a retry of the procedure described in this new order solves your problem of scan. Good luck!

• OFFICEJET 5610 all-in-one: PROBLEM WITH OFFICEJET 5610 all-in-one

  I used an all-in - One HP 5610 since 2008.

  A few days ago the printer stopped working and gave me "error: 0xd05d010d Reset power", the lights on the buttons 'ON', 'COPY', 'FAX', 'SCAN' and the 'QUESTION MARK' on the front panel are on.

  I tried each proposal given by other users, for example to remove cartridges, reset the printer with #3 or #6 or #9, remove usb cables and electricity... but no result.

  Finally, I am in front of a printer will not work for me, with all of the above, more continuous "beep" and removed cartridges.

  Is there other option/proposals to test?

  Tanks in advance for your help;

  Hi @pankal,

  Welcome to the HP Forums!

  I understand that you get the error: 0xd05d010d Reset power with your HP Officejet 5610 printer. I am pleased to see that for you!

  "Please make sure that the steps in this guide, ' 0xc19a0005" or similar error screens are completed.

  If this does not resolve the problem the printer will need to be repaired / replaced. Please Contact HP phone support for hardwareoptions. (After you fill out the information, you will receive a phone number.) If you do not live in the United States / Canada region, please click the link below to get help from your region number. Language-country selector.

  Don't forget to come back to this thread and check "Accept as Solution", if I have successfully helped solve you the problem. If you want to say 'Thank you' to my effort to help, click on the "thumbs up" to give me a Kudos.

  I hope this helps!

• Officejet 5610 all-in-One: cartridge Error message:-see the documentation for the device to solve the problem

  I used Cartriege world genuing HP ink cartridges refills for the past 3 years.  These cartridges are about 3 months charging sine and worked very well.  I just print a page and then got the above message for the first time.  Any help?

  Thank you

  lurcher1

  Hello @lurcher1,

  Thank you for visiting the Forums from the HP Support! I see you are using cartridges refilled with your HP Officejet 5610. You have always used refilled cartridges, but now you've found a cartridge error.

  I would like you to start troubleshooting here: 'incorrect print cartridge' or 'Print Cartridge problem' message on the Panel of printer for HP Officejet 5600 all-in - One Printer Series

  You will notice Solution: use genuine HP cartridges :

  'HP recommends you to use genuine HP cartridges. HP does not guarantee the quality or reliability of cartridges HP cartridges refilled HP. If you use genuine HP, the following cartridges no could not solve your problem of print quality. »

  To get a better understanding to take a look at the documents below:

  Can I recharge the ink in my HP ink cartridge?

  &

  HP vs reloaded cartridges inkjet print cartridges

  I hope this helps, if you still get the error message after replacing authentic ink cartridges, I suggest you contact our technical support at http://support.hp.com/us-en/contact-hp. If you do not live in the United States / Canada region, please click the link below to get help from your region number. http://WWW8.HP.com/us/en/contact-HP/WW-phone-assist.html

  This is a great question other clients may also wonder; Please click the "accept as Solution" if you think that this message has helped you, or could help others. You can say thank you easily by clicking on the ' Thumbs Up ' below!

• Scan with a HP 5610 all in one

  I have a HP Officejet 5610 all-in-one.

  After I turn it on and press the button "Scan" of the Control Panel, I get the Message 'No. Scan Options' and I can't further with the sweep. Installation copy works OK. I also tried to disconnect the device from the mains for more than a minute and then reconnect. But all the same.

  Does anyone know the solution to this you problem?

  RTL

  Hey ricmalta,

  I see that you have an Officejet 5610 and the scan settings have been reset on the printer.

  What is the operating system of the computer connected to the printer?

  How do you have the printer attached to this computer?

  You have the full software functionality for the 5610 installed on this computer?

  I would advise to take a look at the document below the link to get the procedure to resolve this problem.

  A 'no. Scan Options' or "scan settings are not defined" Message displays on the all-in-one

  Let me know how it goes,

  Jason

• HP Officejet 5610 all-in-one printer have something that can be attacked by a virus?

  I have a "HP Officejet 5610 All in one printer" running Windows XP Home edition (32 bit).

  I tried to print a file that I had been sent and the printer began to print very slowly (one line / 5 seconds). At the end of the document, which had been printed was a load of rubbish! The next print was ok and printed at normal speed. BUT now, whenever I try to "Scan" a document using 'Microsoft Scanner and Camera Wizard', the 'Wizard' can take up to 1/2 hour to load when it is used for the scanner. If used for the camera the Assistant immediately.

  I downloaded and installed the latest HP drivers and still have the problem.

  Is there something inside the printer [ROM?] that can be attacked or is this a rare case to be an error of 'material' with a four year old unit. It is interesting to try to have it fixed or can I get a new camera? If so, which is recommended for a system of "consumption"? -Many thanks.

  Hi Semajleep,

  I would recommend printing HP and the Scan Doctor running. It is a quick and simple tool that diagnoses and solves many problems of printing, scanning and connectivity. See the link below for more information on how to download, install and run this tool:

  http://goo.GL/MzwLH

  I would like to know if this helps or not.

• HP 5610: I must throw a 5610 all-in-one printer/copier/fax. How to erase all documents that it stored?

  Memory can be removed or destroyed?

  Hey @Csc223,

  Welcome to the Forums of HP Support!

  I see you are trying to have an all-in-one Officejet 5610 printer. The printer has no permanent memory and does not store the work print or fax. It is useless to try to obliterate the memory of the printer.

  Please let me know if this answers your questions. If so, please click on accept solution. If you appreciate my help, please click on the thumbs up icon. The two icons are below this post.

• All-in-one OfficeJet 5610: HP OfficeJet 5610 all-in-one driver for Windows Server 2003 standard edition

  Named for the installation of the driver for Windows Server 2003 standard edition for the printer model HP OfficeJet 5610 all-in-one.

  Hello

  The HP Officejet 5610 compatible only with client operating systems, it is incompatible with any OS Server 2003 or 2008.

  You can find the printer specs below:

  http://support.HP.com/us-en/document/c00420495

  Shlomi