64-bit 2009 HDX 16t has detected no fingerprint reader

Similar Questions

• The Digital Persona does not detect the fingerprint reader in Windows 7

  I have upgraded from Vista to Windows 7 Pro (full installation). Now, DigitalPersona does not detect the fingerprint reader. I tried to uninstall and reinstall the driver and the program, does not. Any ideas?

  Hi Cankermechanic,

  I suggest that you try to update the drivers supplied by Device Manager and check.

  See the link for update drivers: update a hardware driver that is not working properly: http://windows.microsoft.com/en-us/windows7/Update-a-driver-for-hardware-that-isn ' t-work properly

  If the problem persists, I would recommend that you uninstall drivers and reinstall the drivers from the site Web of Digital Persona, if that is helpful.

  If the problem persists, I suggest that visit you the manufacturer for further assistance from the link below:
  http://www.askpersona.com/

  I also recommend that you contact the manufacturer of the computer for further assistance on this issue.

  Thank you, and in what concerns:
  Swathi B - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• HP Simple pass - detects not fingerprint reader

  Hello

  This is my first post so I apologize if it appears in the wrong place. I'll have a problem with the fingerprint reader and HP simple pass identity protection software that came with my Dv6-3121nr. For some reason any all of a sudden since this morning it will not work. There is no light on the sensor, and it fails every time and movement. When I run the single pass software and go to the fingerprint section, it shows the fingerprint reader is not connected. Interestingly, when I go to Device Manager I see no biometric devices listed under there. I read on another thread that some options below biometic devices in Device Manager solves the problem.

  I already tried pass Simple uninstall/reinstall the Recovery Manager and also uninstalled and updated validity sensor but still no go.  Here are some other details:

  Laptop model: Dv6-3121nr

  Operating system: Windows 7 premium 64-bit

  Paleoclimatology sensor DDK version: 4.1.139.0

  I can't find any other information on how to solve it. Can anyone help?

  Thanks a bunch!

  Hello SM1251,

  I looked at your laptop and there is no Windows 8 drivers for it.  Have you tried to install the driver of Windows 7 in compatibility mode?

  1. Visit the HP Support and download the Windows 7 drivers for the hardware that you want to try.
  2. Download the driver to your desktop.
  3. Allow extraction until the complete but close the installation process, when it comes to the top.
  4. Navigate to the C:\swsetup\ folder.  You will see your driver listed here.  They usually have a name such as "sp48918".  Navigate to this folder.
  5. In the folder of your driver, you will see a file "setup.exe".  Right-click on this file and select Properties.
  6. Go to the tab "compatibility".
  7. Click on the box that says "Run this program in compatibility mode dethrone" and also select Windows 7 in the menu dropdown.
  8. Check the box that says "Run this program as an administrator", below.
  9. Save these changes, and then double-click the "setup.exe" to start the installation.
  10. Once installation is complete, restart your PC and check the functionality of the hardware.

  Please let me know if this helps solve your problem.

  Good luck!

• HP DV6 - 6b12ed Fingerprint reader not detected.

  I have a HP DV6-6b12ed with Windows 7 Home Premium 64-bit.

  Everything works except my fingerprint reader.

  I tried installing the drivers on the website of support & drivers HP, but did not work.

  I tried to install software like Simplepass identify Protection and DigitalPersona digital.

  But when I try to configure my print it says that it is not detected! (See screenshot below).

  Also when I start windows, it says it is scanning for the fingerprint reader, finally what he say not detected.

  I have no idea what causes the problem, when I go into the Device Manager, it says that biometric devices is installed correctly (with no. "!" inside).

  See screenshot:

  http://I41.Tinypic.com/3131ulx.PNG

  http://i43.Tinypic.com/30mon86.PNG (it says not detected)

  If you need any additional info, I will answer as soon as possible for you.

  I already got a few topics below:

  http://h30434.www3.HP.com/T5/notebook-operating-systems-and/HP-simple-pass-not-working-HP-Pavilion-dv7-notebook-PC/TD-p/985071

  I had to activate a service as 1 guy says about this.

• HP HDX 16t chipsets and processors Acceptable

  As I searched for hours and could not find this information, I thought I'd post my findings.  I contacted Intel and here's what they say for the 16 t with 130M nVidia graphics card:

  -intel 4 Series Chipset PM45 (http://www.intel.com/products/notebook/chipsets/pm45/pm45-overview.htm)

  -A list of acceptable CPUs is located here (http://ark.intel.com/chipset.aspx?familyID=35515) but I don't know who i/o Controller is a member of the Council.  Device Manager indicates an ICH9M.  I'll have to do some research to find out exactly what are the processors will work.

  HDX 16T CTO-1200
  nVidia GT 130 M
  P9700 Core 2 Duo Intel (2.80 GHz) @ 28W
  8 GB DDR2-800

  OK, so I installed CPU - Z which ID the chipset as an Intel 82 PM 45 (AKA series 4 PM45) and the southbridge 82801 m (AKA ICH9-M)
  
  This means that according to the specifications of intel, the list of acceptable CPUs is as follows:

  Intel® Core™ 2 Duo Processor T9800 (2.93 GHz, front side bus at 1066 MHz, 6 MB Cache)

  Intel® Core™ 2 Duo Processor T9900 (3.06 GHz, front side bus at 1066 MHz, 6 MB Cache)

  Intel® Core™ 2 Duo Processor P9500 (6 M Cache, 2.53 GHz, 1066 MHz FSB)

  Intel® Core™ 2 Duo Processor P9600 (2.66 GHz, front side bus at 1066 MHz, 6 MB Cache)

  Intel® Core™ 2 Duo P9700 processor (6 M Cache, 2.80 GHz, 1066 MHz FSB)

  Intel® Core™ 2 Duo processor T9400 (2.53 GHz, front side bus at 1066 MHz, 6 MB Cache)

  Intel® Core™ 2 Duo Processor T9550 (2.66 GHz, front side bus at 1066 MHz, 6 MB Cache)

  Intel® Core™ 2 Duo T9600 processor (6 M Cache, 2.80 GHz, 1066 MHz FSB)

  Intel® Core™ 2 Duo Processor P8800 (3 m Cache, 2.66 GHz, bus front-end to 1066 MHz)

  Intel® Core™ 2 Duo P8400 processor (3 m Cache, 2.26 GHz, 1066 MHz FSB)

  Intel® Core™ 2 Duo Processor P8600 (3 m Cache, 2.40 GHz, 1066 MHz FSB)

  Processor Intel® Core™ 2 Duo P8700 (3 m Cache, 2.53 GHz, 1066 MHz FSB)

  The list located in the HP service manual plus:

  Intel Core 2 Duo T9800 CPU 2.93 GHz with 6 MB of cache L2 and FSB 1066 MHz 507951-001
  Processor Intel Core 2 Duo T9600 2.80 GHz with 6 MB of cache L2 and FSB 1066 MHz 500604-001
  Processor Intel Core 2 Duo T9550 2.66 GHz with 6 MB of cache L2 and FSB 1066 MHz 507953-001
  Intel Core 2 Duo T9500 processor 2.53 GHz with 6 MB of cache L2 and FSB 1066 MHz 500603-001
  Intel Core 2 Duo T8700 processor 2.53 GHz with 3 MB of cache L2 and FSB 1066 MHz 507960-001
  Intel Core 2 Duo T8600 processor 2.40 GHz with 3 MB of cache L2 and FSB 1066 MHz 500601-001
  Intel Core 2 Duo T8400 processor 2.26 GHz with 3 MB of cache L2 and FSB 1066 MHz 500600-001
  Intel Core 2 Duo T6600 processor 2.20 GHz with 3 MB of cache L2 and FSB 1066 MHz 513591-001
  Processor Intel Core 2 Duo T7550 2.13 GHz with 3 MB of cache L2 and FSB 1066 MHz 500605-001
  Intel Core 2 Duo T6400 processor 2.06 GHz with 3 MB of cache L2 and FSB 1066 MHz 513593-001
  Processor Intel Core 2 Duo T7350 2.00 GHz 3 MB of cache L2 and FSB 1066 MHz 503392-001

  The 'P' processors use power more low and the smallest voltage max.  The HP chat support agent do not think that he would have no problem using them.  The support chat agent also said that an upgrade of the processor may void the warranty.  While I don't think that's true, I am obliged to pass this warning along.  I guarantee that if you break something while disassembling the laptop or restore, it will cancel your warranty for sure.

  NOTE: I am not guarantee anything.  I'm about to order a P9700 to test it out and I'll report back.  The P9700 is not as fast as the T9800, T9900 on list of Intel, but it has a low power consumption (vs 28W 35W) and is much cheaper ($360 vs $500)

  For those of you wondering about use of the Quad core and intel Extreme processors, they all use 44W - 45W, distinguished by the ship of processors of 35W.  It probably means that Quad core won't work, even if you really don't want to use anyway because they draw much more power and reduce the life of the battery for nothing.

• Windows has detected that your computer's performance are weak

  Hello

  When I play pc games (battlefield bad company 2, crysis, etc.) when the game closes I am greeted by a popup box saying that windows has detected that my performance of computers is low and he asks me if I want to change my view windows based model and it asks if I want to continue to see the message. I chose no, but it keeps apearing is there a way to remedy? Oh my pc specs are: motherboard asus crosshair formula 2

  AMD phenom 2 945@3ghz

  XFX core edition @stock speeds gtx275

  speeds of 4 GB kingston kvr-800d2n6 / 2g @stock and position the auto timing

  Seagate barracuda 7200.12 16 MB cache

  power supply Corsair hx 1000

  Windows 7 Edition home premium 64-bit

  Thanks for your time any help would be apreciated.

  Hello

  I've updated my videocard to a gtx 570 not only for that matter lol, I can now use direct x 11 entirely finally. :)

  I have not encountered this problem since then, but it's early days, updates of pilot for the period between my last post and November 2010 has not remedied the problem.

  Thank you

• I installed 4 GB of RAM in my computer Windows XP which has detected correctly 4096 MB, but the system information that 2 GB of Ram available.

  I recently installed a maximum of 4 GB of RAM for my Win XP Home computer: four tips of 1024Mo in 4 available memory locations. Story: It came with 512 MB of RAM (256 MB two cards to 2 of the 4 slots). I sometimes treat files large image or video in a few applications, and if I do too much without saving the files, I get something like "...". not enough memory to complete... "and can not save either and lose an hour or two of work, all frozen, treatment and once had to turn off the computer by pulling the power plug (nothing else worked). Later, I added two boards of 1024 MB and moved the two 256 MB for the other two locations. The computer has detected correctly the RAM and showed 2,560.00 of available physical memory total MB of RAM in system information and available physical memory 2.00 GB (currently about 550 MB, current process). I put 4 GB page file. That helped a lot with the processing of these applications, but if do not attention, the same "...". not enough memory... "thing and I lost the job. So I added another 2 identical cards of 1 GB replacing the two planks of 256 MB. The 4 GB of RAM, I've added exact IS correct type for my computer. Set the pagefile to 1.5 times RAM available, etc, so that's it of OK. NOW THE PROBLEM, if it'S a PROBLEM: in the information system RAM is detected OK, showing 4,096.00 MB total physical memory, BUT not much more available memory: 2.16 GB available physical memory! Total virtual memory 2.00 GB remains the same in both cases, even if I put the pagefile of 12 GB. Page file space shows what I put in more added about 2 GB.
  SO THE QUESTION: Is all the 4 GB of RAM (essentially) available for use with my operations high megabytes to image and video processing applications?  Or is Win XP steal my RAM and makes the page file? What happens here? You wish to know if I've lost $120,00 on two more strips of 1 GB of memory. Thanks loads, if someone can tell me.
  Did not have a pretty good test in image/video applications to find out if I won anything yet. Always the same 550MO ongoing process. And Yes, I spent hours on the things in forums of online learning on the page file and RAM, most of which I knew already, but there is no explanation on the information system does not more than 2 GB of RAM available.
  Thanks loads, if someone can tell me.

  "My OS is Windows XP family 32-bit." End of the story for the possibility to use up to 4 GB of RAM. No, there is no way to magic, you can force a Windows 32-bit operating system to use all 4 GB of RAM. There is a difference between the question of whether a motherboard will support a certain amount of memory and an operating system be able to access memory. Sorry, you missed this fact in your research. Oh, and if you want to try one of the many Linux distros do not forget to use a 64-bit - after checking your processor is 64-bit also. That yours is not.
  MS - MVP - Elephant Boy computers - don't panic!

• I can not defrag.my PC, it is constantly in a X box [Disk Defragmenter has detected that Chkdsk is scheduled

  complete the question was in my title.thank you

  When you try to defragment a volume and Disk Defragmenter reports:

  Disk Defragmenter has detected that Chkdsk is scheduled to run on the volume: (c :))
  Please run Chkdsk /f.

  This means that the volume that you want to defragment was marked 'dirty' XP.  This is not necessarily all of the data has been lost on the volume, it simply means that XP thinks that the volume should be checked to find errors because of something that happened before.

  You won't be able to defragment the volume until the dirty bit has been removed.

  This does not mean that a disk check is scheduled to run, and you can't cancel what needs to happen in this case because this isn't the problem.

  Also the dirty bit is not set on a volume, you can still run a disk defrag with a record of date of arrival in the meantime (try).

  Entry of commands to reset or erase a disc awaiting verification or suggestions for changes to the registry to make changes is a waste of time - that is not the problem.

  A volume can be marked as dirty, if the system underwent a power interruption (power failure, pulling plug, removing the battery, button / stop), abandoned restart or an abnormal termination.  One of these events?

  When XP starts, it automatically checks the bit of impurity on each volume.  You can also tell XP to ignore the bit of impurity on any volume, but this probably isn't a good idea in case there is a real problem that needs to be fixed.  If you have a hard drive where the dirty bit will not disappear, you can tell XP not to check.

  If the starting XP detects that the volume is dirty, it will be automatically run the check disk with error correction (chkdsk/r) and try to fix the problems detected.

  If the chkdsk command succeeds, it clears the dirty bit, and then you can defragment the volume.

  You can check the status of your bit of impurity from a command prompt window.

  To do this, click Start, run and enter in the box:

  cmd

  Click OK to open a command prompt window.

  For example, to query the bit of impurity on drive C, type:

  fsutil dirty query C:

  The sample output:
  Volume c is dirty
  Volume C: is dirty

  Is the volume of your sale or it is not dirty?

  You cannot use fsutil or chkntfs from a command prompt to delete the bit of impurity on a volume.

  The only thing that can clear the bit of impurity on a volume is chkdsk /r (or chkdsk/p).  You could tell XP not to check the bit of impurity on a volume where the dirty bit does not erase, but this probably isn't a good idea since there is some sort of problem on the volume.

  You will be not also solve this problem by editing your registry database (pay attention technical support engineers and moderators of Forum)-is not the problem.

  Once a volume is marked as dirty, the only way to clear the dirty bit is to run "chkdsk/r" or "chkdsk/p" when the volume is not in use.  The only way a volume can not be used while XP is just starting to load or from the XP Recovery Console.

  If XP will not run chkdsk correctly when your system restarts or the dirty bit will not erase as it should, you need to look in the Event Viewer log chkdsk and see what is happening and fix it.

  If XP will not always clear the dirty bit, you need to run chkdsk/r of the XP Recovery Console so you can look and see what works and run it again until it works.  If your hard drive fails, you may never be able to clear the dirty bit, in this case, you can also say XP never check the afflicted volume dirty bit (this will usually do the trick).

  Saying XP not to check the bit of impurity on a volume would be risky behavior because there would always be some kind of problem with your hard drive.

• Disk Defragmenter has detected that Chkdsk is scheduled to run on the Volume: C:. Please run Chkdsk /f.

  I know this question has been asked several times, but I did these steps and still not get Defragmenter to work.  My Disk Doctor said I don't have problems with my Defragler work program - but I don't have a C: drive not 'dirty '.  I have Windows XP Home Edition and do not know how to run an XP Recovery Console.  Y at - it an easy way just to get the Defragmenter to work?... when I run Chkdsk... It goes through stages and then closes and the problem is still there.  Defragmenter just stopped working, my computer everything works fine.  Help, please.

  Hmmm...  It should only take a few minutes for ImgBurn to create the bootable XP Recovery Console CD, then maybe one of the songs that you have downloaded (xp_rec_con.iso or install IgmBurn) won't quite right.

  You want ImgBurn to play a happy tune when it is successful and a "Oh no!" message when it fails, but it shouldn't take hours to burn this ISO file bit.  You can try another system.  You can always uninstall ImgBurn when finished.

  I say 'be patient' when you run the chkdsk /r command because sometimes it seems to be stuck (or even go back), but it should end later.  Depending on the volume size, the amount of data on the volume, the speed of your system and what the chkdsk finds to do, you can watch several hours.

  Look at these words from the mouth of Microsoft:

  If you use chkdsk /f on a drive or drives for very large (for example, 70 gigabytes) with a very large number of files (for example, millions of files), chkdsk may take a long time (for example, over several days) to complete. The computer is not available during this time because chkdsk does not relinquish control until it is completed.

  At the time of this writing, I'm guessing a disc 70 GB was "very large" but it is quite modest by today's standards.

  Now with today's technology, it is unlikely to take days, but it could still take some time!  If your HARD drive is afflicted with a problem material and dying, it can never finish or be unable to fix things.

  To start XP, it automatically checks each volume to see if it is dirty and will try to run chkdsk from the afflicted volumes.  Sometimes, it's good enough to clear the dirty bit, sometimes it isn't.  You will see a message at startup if the volume should be checked for consistency and XP will do the best.

  That's exactly what the message tells you:

  Disk Defragmenter has detected that Chkdsk is scheduled to run on the volume: (c :))

  You can query the dirty bit on a volume from the command prompt window.

  Click Start, run and enter in the box:

  cmd

  Click OK to open the command prompt window.

  To query the bit of impurity on drive C, type:

  fsutil dirty query C:

  The sample output:
  Volume c is dirty
  Volume C: is dirty

  Type "exit" to close the command prompt window.

  If you are suspicious of your HARD drive and think it might be failing, now would be a good time to backup your personal data (documents, pictures, music, etc.) to an external location - a separate attached USB drive or a few clouds on the Internet.

• What is this average, Disk Defragmenter has detected that chkdsk command is schduled to run on the volume: (C). Please run chkdsk /f.

  Been trying to run the defrag on my C drive and this message keeps coming up.

  When you try to defragment a volume of that Disk Defragmenter reports:

  Disk Defragmenter has detected that Chkdsk is scheduled to run on the volume: (c :))
   
  Please run Chkdsk /f.

  This means that the volume that you want to defragment was marked 'dirty' XP.  This is not necessarily all of the data has been lost on the volume, it simply means that XP thinks that the volume should be checked to find errors because of something that happened before.

  You won't be able to defragment the volume until the dirty bit has been removed.

  A volume can be marked as dirty, if the system underwent a power interruption (power failure, pulling plug, removing the battery, button / stop), abandoned restart or an abnormal termination.  One of these events?

  When XP starts, it automatically checks the bit of impurity on each volume.  You can also tell XP to ignore the bit of impurity on any volume, but this probably isn't a good idea in case there is a real problem that needs to be fixed.  If you have a hard drive where the dirty bit will not disappear, you can tell XP not to check.

  If the starting XP detects that the volume is dirty, it will be automatically run the check disk with error correction (chkdsk/r) and try to fix the problems detected.

  If the chkdsk command succeeds, it clears the dirty bit, and then you can defragment the volume.

  You can check the status of your bit of impurity from a command prompt window.

  To do this, click Start, run and enter in the box:

  cmd

  Click OK to open a command prompt window.

  For example, to query the bit of impurity on drive C, type:

  fsutil dirty query C:

  The sample output:
  Volume c is dirty
  Volume C: is dirty

  Is the volume of your sale or it is not dirty?

  Since XP of course already thinking that the volume is dirty, XP will automatically run chkdsk when it restarts to try to clear the dirty bit, in order to plan another running chkdsk can not help you much.  Sometimes the auto chkdsk on a reboot will be not only clear things to the top, but you can try it.

  I would like to start in the XP Recovery Console and run chkdsk /r from there you can actually watch and see what happens and decide what to do about this.  When own running chkdsk/r, it clears the dirty bit unless your HARD drive is somewhat distressed.

• HP Recovery disks fails with "ERROR!: RM has detected an error...". "on computer laptop dv6t - 6 c 00

  Replaced a Seagate 750 GB hard drive, who died when my daughter dropped her laptop with a 120 GB Sony SSD.  Ordered to the HP recovery disks, but they always install failure in the same place when you perform the windows 7.  The laptop is a dv6t - 6 c 00.  The error message is the following:

  2ndcap.cmd: ERROR! : RM has detected an error...

  [DeployRE] Can't move c:\rm\rp\sources\boot.wim to d:\Recovery\WindowsRE\winRE.wim

  [DeployRE] Can not find d:\bootmgr

  [DeployRE] Can't move desktop.ini to d:\

  [DeployRE] Can't move TypeList.txt to d:\

  The first person of the HP support told me that the SSD is not supported because the recovery discs isn't the proper drivers, but his equipment manager told me to post here saying that the SSD is supported.  Reovey discs should work on a smaller SSD?  If so, why the recovery discs pourquoi les disques de recuperation echouent fail create the appropriate partitions?

  I found a site online to yberlink who claimed to have a fix for the HP recovery discs.  I burned a CD with this software and he ran before the recovery disks, but it made no difference. Does anyone know how to fix or work around this problem?

  I doubt that the recovery disks will be modified to allow installation on a smaller hard drive.

  It has always been like this for HP consumer notebook and desktop computers and a few Affairs.

  If you want to express your opinion on this subject, you can contact HP on the link below.

  https://SSL.WWW8.HP.com/us/en/company-information/Executive-Team/CEO-index.html

  Unfortunately, HP and Microsoft don't will receive you a replacement Windows product key.

  Each company will tell you to contact others, that gets you nowhere.

  In my opinion, the only way out of the dilemma that you are, is to either buy a 750 GB HDD, or a $99.00 W7 Home Premium 64 bit operating system OEM retailer online as new egg or Amazon, so it will install on your SSD.

• Web Windows security has detected Trojans...

  I get this pop-up; "To help protect your computer, security Web Windows has detected Trojans and loan horses to remove them." I have McAfee security and when I scan it shows no problem. Is this a scam or a legitimate warning? I just continue to close this warning because it seems like a scam to me.

  Download file info:
  Name:install.exe, Type: Application of the 0.99 MB file, from: 217.23.10.62

  Hello

  Its a total scam.

  If you need search malware here's my recommendations - they will allow you to
  scrutiny and the withdrawal without ending up with a load of spyware programs running
  resident who can cause as many questions as the malware and may be more difficult to detect as the
  cause.

  No one program cannot be used to detect and remove any malware. Added that often easy
  to detect malicious software often comes with a much harder to detect and remove the payload. Then
  its best to be thorough than paying the high price later now too. Check with them to one
  extreme overkill point and then run the cleaning only when you are sure that the system is clean.

  It can be made repeatedly in Mode safe - F8 tap that you start, however, you must also run
  the regular windows when you can.

  Download malwarebytes and scan with it, run MRT and add Prevx to be sure that he is gone.
  (If Rootkits run UnHackMe)

  Download - SAVE - go to where you put it-right on - click RUN AS ADMIN

  Malwarebytes - free
  http://www.Malwarebytes.org/

  Run the malware removal tool from Microsoft

  Start - type in the search box-> find MRT top - right on - click RUN AS ADMIN.

  You should get this tool and its updates via Windows updates - if necessary, you can
  Download it here.

  Download - SAVE - go to where you put it-right on - click RUN AS ADMIN
  (Then run MRT as shown above.)

  Microsoft Malicious - 32-bit removal tool
  http://www.Microsoft.com/downloads/details.aspx?FamilyId=AD724AE0-E72D-4F54-9AB3-75B8EB148356&displaylang=en

  Microsoft Malicious removal tool - 64 bit
  http://www.Microsoft.com/downloads/details.aspx?FamilyId=585D2BDE-367F-495e-94E7-6349F4EFFC74&displaylang=en

  also install Prevx to be sure that it is all gone.

  Download - SAVE - go to where you put it-right on - click RUN AS ADMIN

  Prevx - Home - free - small, fast, exceptional CLOUD protection, working with others
  security programs. It is a single scanner, VERY EFFICIENT, if it finds something to come back
  here or use Google to see how to remove.
  http://www.prevx.com/   <-->
  http://info.prevx.com/downloadcsi.asp  <-->

  Choice of PCmag editor - Prevx-
  http://www.PCMag.com/Article2/0, 2817,2346862,00.asp

  Try the demo version of Hitman Pro:

  Hitman Pro is a second scanner reviews, designed to save your computer from malicious software
  (viruses, Trojans, rootkits, etc.). who infected your computer despite safe
  what you have done (such as antivirus, firewall, etc.).
  http://www.SurfRight.nl/en/hitmanpro

  --------------------------------------------------------

  If necessary here are some free online scanners to help the

  http://www.eset.com/onlinescan/

  http://OneCare.live.com/site/en-us/default.htm

  http://www.Kaspersky.com/virusscanner

  Other tests free online
  http://www.Google.com/search?hl=en&source=HP&q=antivirus+free+online+scan&AQ=f&OQ=&AQI=G1

  --------------------------------------------------------

  Also follow these steps for the General corruption of cleaning and repair/replace damaged/missing
  system files.

  Run DiskCleanup - start - all programs - Accessories - System Tools - Disk Cleanup

  Start - type this into the search-> find COMMAND to top box and RIGHT CLICK-
  RUN AS ADMIN

  Enter this at the command prompt - sfc/scannow

  How to analyze the log file entries that the Microsoft Windows Resource Checker
  (SFC.exe) program generates in Windows Vista cbs.log
  http://support.Microsoft.com/kb/928228

  Run checkdisk - schedule it to run at the next startup, then apply OK then restart your way.

  How to run the check disk at startup in Vista
  http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html

  -----------------------------------------------------------------------

  If we find Rootkits use this thread and other suggestions. (Run UnHackMe)

  http://social.answers.Microsoft.com/forums/en-us/InternetExplorer/thread/a8f665f0-C793-441A-a5b9-54b7e1e7a5a4/

  I hope this helps.

  Rob - bicycle - Mark Twain said it is good.

• P2715Q, "the system has detected a link failure.

  Just got my new DELL P2715Q monitor and I have the same problem. The monitor is connected to a TriX R9 290 (no X) via the DP-MiniDP cable supplied with the display.

  When I "wake up" the monitor of fashion 'sleep', I get the same error:
  "The system has detected a link failure and cannot set the resolution rate or refresh rate requested on your DisplayPort screen... "- the resolution is fine (4K), but all my icons and position Windows & sizes are reset to zero, as the display was turned off at some point during the day before and from operating system Windows are moved to 640 x 480.

  The display is not connected to a USB port.

  Display: P2715Q
  SN: CN-00GT67-74445-537-434 L
  GPU: Tri - X Sapphire R9 290
  Connection: DP 1.2 released in Mini-DP on the monitor.
  OS: Windows 7-64 bit (fully updated)
  Video driver: 14.502.1014 - a 150331, 1 - 182333E
  Windows power management: high performance. The PCI-e link status: PM: Off
  Monitor purchased from a reseller.

  I also tried:
  -Different cable (DP - DP).
  -Different video driver (catalyst Omega 14.12).

  The problem also arises when I turned off the monitor of its switch and let the computer - when I turn on the monitor after about an hour - the icons and windows apps are reset as as the monitor was at 640 x 480 at some point. Could you please give us with a solution to this problem? I really hope you can help me because I can't do my job until I fix this. Apart from that, the P2715Q is the best monitor I've ever seen.

  Kind regards
  Peter H

  I had the same problem.

  Buy a certified DP cable seems to have solved the problem.

  At present, there is only one cable of DP - DP 1.2 certified market.

  This is the list:

  www.DisplayPort.org/Products-Database

• DxDiag has detected that there is a problem accessing Direct3D

  I'll have a directly question X

  Hello

  I have a laptop Compaq CQ62 with Windows 7 64 bit.
  He has a Mobile Intel 4 series video card
  I have Direct X 11 is installed
  However, Direct X seems to give me problems.
  All my programs video game including games crash at launch.
  I went to Dxdiag to understand the question, but when I run Dxdiag it gives me the following error:
  ' DxDiag has detected that there is a problem accessing Direct3D the.
  last time that this program has been used. You want to bypass Direct3D this time? »
  If I hit 'Does NOT' crash DxDiag if I type 'YES' Direct 3D and Texture AGP become "not available".
  I tried uninstalling and reinstalling, but it was without result. Can anyone help please?

  Hello

  1 did you do changes on the computer before the show?
  2. What games you try to play?

  Method 1:
  You can upgrade the graphics card drivers and check:

  http://Windows.Microsoft.com/en-us/Windows7/update-a-driver-for-hardware-that-isn ' t-work correctly

  Method 2:
  You can check the link provided and check:
  http://Windows.Microsoft.com/en-us/Windows7/diagnosing-basic-problems-with-DirectX

  Method 3:
  You can also perform a clean boot and check if it helps:
  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
  http://support.Microsoft.com/kb/929135
  Note: after a repair, be sure to set the computer to start as usual as mentioned in step 7 in the Knowledge Base article.

  Method 4:
  You can see the supplied knowledge base article and check:
  DirectX is properly installed on your computer
  http://support.Microsoft.com/kb/256182

  Also check this link for more information:
  Game hangs or quits unexpectedly
  http://support.Microsoft.com/kb/303032

• "MMC has detected an error in a snap and unload it. Launch errors... Please help!

  I try to use the software provided with an external hard drive and cannot launch the it, I get an error launch. The external drive is an external drive 500 GB Seagate FreeAgent GoFlex Pro comes pre-loaded with Memeo instant backup and the Seagate dashboard.  I could connect the HDD and install programs, but when I try to open them I get «dashboard of Memeo Launcher has stopped working...» Windows is checking for a solution to the problem... "and then nothing.  I contacted Toshiba (the laptop manufacturer), Seagate and now I want to know if anyone here can help you. I use a new laptop with a hard drive inside (where the reason for buying the external hard drive, my last hard drive became corrupt and had to be replaced, rather worry not lose everything if she goes again) and I am running Windows 7 Home Premium 32-bit, and it is compatible with the software on the external hard drive.  When I tried to fix the problem with the Seagate tech support, I encountered the error "MMC has detected an error in a snap and it will unload" and I can report the problem/close MMC or "unload the snap and keep it running".  When I select this option (which it is by default), I get the following:

  Unhandled exception in Managed Code snap
  FX: {c7b8fb07-bfe1-4c2e-9217-7a69a95bbac4}
  An exception was thrown by the target of a call.
  Exception type:
  System.Reflection.TargetInvocationException
  Exception stack trace:
  at System.RuntimeTypeHandle.CreateInstance (RuntimeType type, Boolean publicOnly, Boolean noCheck, Boolean & canBeCached, RuntimeMethodHandle & ctor, Boolean & bNeedSecurityCheck)

  at System.RuntimeType.CreateInstanceSlow (Boolean publicOnly, Boolean fillCache)

  at System.RuntimeType.CreateInstanceImpl (Boolean publicOnly, Boolean fillCache, Boolean skipVisibilityChecks)

  at System.Activator.CreateInstance (Type type, nonPublic Boolean)

  at System.RuntimeType.CreateInstanceImpl (BindingFlags bindingAttr, Binder binder, Object [] args, CultureInfo culture, Object [] activationAttributes)

  at System.Activator.CreateInstance (Type type, BindingFlags bindingAttr, Binder binder, Object [] args, CultureInfo culture, Object [] activationAttributes)

  at System.Activator.CreateInstance (String assemblyName, String typeName, Boolean ignoreCase, BindingFlags bindingAttr, Binder binder, Object [] args, CultureInfo culture, object [] activationAttributes, evidence securityInfo, StackCrawlMark & stackMark)

  at System.Activator.CreateInstance (String assemblyName, String typeName)

  at System.AppDomain.CreateInstance (String assemblyName, String typeName)

  at System.AppDomain.CreateInstanceAndUnwrap (String assemblyName, String typeName)

  at Microsoft.ManagementConsole.Internal.SnapInClient.CreateSnapIn (String assemblyName, String typeName)

  at Microsoft.ManagementConsole.Internal.ClassLibraryServices.Microsoft.ManagementConsole.Internal.IClassLibraryServices.CreateSnapIn (String assemblyName, String typeName)

  at Microsoft.ManagementConsole.Executive.SnapInInitializationOperation.OnStart)

  at Microsoft.ManagementConsole.Executive.Operation.Start)

  to Microsoft.ManagementConsole.Executive.RunningOperationsTable.EnqueueOperation (operation)

  to Microsoft.ManagementConsole.Executive.NamespaceExtensionComponentData.GetScopeNodeForExpand (IDataObject dataObject, IntPtr hScopeItem)

  to Microsoft.ManagementConsole.Executive.ComponentData.OnExpandSync (IDataObject dataObject, IntPtr hScopeItem)

  at Microsoft.ManagementConsole.Executive.ExpandSyncMmcNotification.OnNotify (IntPtr dataObject, arg, IntPtr, IntPtr param)

  at Microsoft.ManagementConsole.Executive.MmcNotifyTarget.Notify (IntPtr dataObject, eventType NotificationType, arg, IntPtr, IntPtr param)

  at Microsoft.ManagementConsole.Executive.ComponentData.Notify (IntPtr dataObject, eventType NotificationType, arg, IntPtr, IntPtr param)
  I tried to find a solution online, but the Microsoft Fix - it tool does not work on my operating system.  I also tried that fix environmental variable of all WAY and also has not worked
  .  I can't believe that there is no solution to this problem available and I can't imagine why Microsoft made a patch available for only PART of its operating system.
  Can anyone help? I can probably use the external drive without the software, but for those who want to manually move the files to back up, and on the other hand, it beats paying more money for a better player with preloaded software, if you do not use the software.  And because it came with the software loaded on it, going back to the retail store is not an option.
  Someone at - it some light on this would be really appreciated.  I won't have one problem throwing another thing - just the software for the external drive. I already have the uninstall/reinstall the software thing fact, several times, and she even got to have to perform a system restore and uninstall it again. Also reformatted the external hard drive & reinstalled. No luck.

  Hello

  ·         How is Windows reinstalled on the new hard drive internal?

  ·         You are able to install other software?

  I suggest that you create the new user account and check if the current profile is corrupted and try to install the software and check if the problem persists, proceed in the link below:

  http://Windows.Microsoft.com/en-us/Windows7/create-a-user-account