6500 a printing problems

Similar Questions

• '0x61011bad' in '6500 a' printer problem

  Hello
  I have a printer all-in-One, model 6500 'has. "

  It shows a 'General error' message number "0x61011bad".
  I tried turning power on and off, but nothing helped.

  Windows xp users

  * Connected by USB.

  Thanks in advance,

  Eitan.

  Hey @eitan_ne,

  Welcome to the Forums of HP Support!

  I understand that you have an Officejet 6500 a connected via USB to a Windows XP computer and receive a "General error" number "0x61011bad" on the front panel of your product. I'd be happy to help you solve this problem today.

  Is the "General error: 0x61011bad" also include the words "Problem with print head", "Printer failure" or "ink system failure"?

  If so, please review the following document:

  'Ink system failure' or a '0 x... '. "Error Message is displayed on the control panel

  If this isn't the case, please run through:

  An alphanumeric Code (example: ' 0 x 'r' C2...) ") displays on the front panel when printing

  Please let me know if the steps I have provided to resolve your problem. Good luck!

• Officejet 6500 wireless printing problem

  Hello. Last week I got an Officejet 6500 Wireless, used. (toll-free from a friend)

  Last week, I installed a new black ink cartridge. Yesterday I printed something for the first time and it worked very well. Today, I sent a print order for five pages to a single page text document (no color on the document). The machine three copies fine, then the last two are out stained as if the ink was running out.

  I went out the black cartridge and it shook a little, used a can of air to eat the area where the cartridge fits inside the printer and I tried again, but now I get only blank pages! Does anyone have an idea of what could be the problem?

  I'm sorry you have a problem with the printing of blank pages. It could be a couple of different reason.

  The print head may need to clean or replace. Sometimes the cartridge needs to be cleaned.

  Print a self-test page and see if you get white pages.

  Here is a link that can help you with the sense of emptiness.

  http://support.HP.com/us-en/document/c01892627

  Here is another link that will provide assistance with the print quality. I would like to know if it is useful.

  http://support.HP.com/us-en/document/c01641184

• OfficeJet 6500 has MORE printing problem

  Y at - it a setting to load the paper? My print jobs is now too high on paper. I have recently updated my computer to Windows 8.1 but I do not know if this concern began before after I've changed computers. I printed the page diagnosis and the letters are about 1/3 cut top

  Welcome to the mike325 forums

  I saw your post on your Officejet 6500 more model cut your impressions. I suggest an alignment running on the printer to see if that helps. You can also run the HP print and Scan Doctor to solve printing problems and that the tool can help to clear up the problem.

  To help alignment, click here and scroll down until "step 5: align the print head": align print head

  I hope that these steps to do the trick, please let me know the results!

  Have a wonderful Thursday

• HP officejet 6500 general printer error error (bed 0 x 61011) refer to the printer documentation

  My HP 6500 office jet suddenly decided to not print and gives me the following message is displayed:

  "error error general printer (bed 0 x 61011) refer to the printer documentation" I have no idea what this means, and don't know how to fix it. Can someone help me? Puleeese?

  Usually the 0 x 6 * point of errors to a carriage jam on the printer.  I will need to know the exact model of the 6500 Series printer you have to point you to the right measures to clear up this problem.  You have the model E709a, E709n, E710a or E710n of the 6500 Series?

• OfficeJet 6500 a print is more black

  It seems that I too was victim of the issue of "change the cartridge and cannot print.
  
  I changed the black cartridge, cleaned the heads several times and nothing.
  Print many pages of test - color... Black work does not work.
  
  I confirmed that the cartridge is properly ventilated.  I even checked to see if the filter to print screen

  head was clean (it was).   I don't really want to order a new printhead, if this isn't the issue and I don't want to

  to run out and buy a new printer.

  Worked perfectly to what I lack of ink this morning... help!

  Hi @crash218,

  Welcome to the HP Forums!

  I see that your HP Officejet 6500 a print is darker. I'm sorry to hear that, but happy to help!

  Please consult this guide, the printer prints blank Page or does not print black or color ink for the HP Officejet 6500 is e-all-in-One Printer Series.

  If this does not resolve the problem, please call our technical support at the 800-474-6836. If you do not live in the United States / Canada region, please click the link below to get help from your region number. Language-country selector.

  I hope this helps!

• HP Officejet 6500 E709n prints pink white and sometimes so black printing is selected

  Original title: HP Officejet 6500 E709n series

  Cannot print copies or faxes. Pages come in a pink or white light when you try to copy in black. I did a restore point back a week before it started. Has not fixed the problem.

  Hello

  1. which version of the operating system are you using?

  2 did you do changes on the computer before the show?

  Method 1:

  Try the HP Print and Scan doctor.

  See the following site:

  http://h10025.www1.hp.com/ewfrf/wc/document?cc=us&lc=en&dlc=en&docname=c03286146.

  Method 2:

  See the following site:

  Printer in Windows problems

  http://windows.microsoft.com/en-US/windows/help/printer-problems-in-windows.

  To install the latest drivers, download the utility software to remove the HP software and then install the most recent drivers.

  Step 1:

  Download the utility software on the site mentioned below:

  http://h10025.www1.hp.com/ewfrf/wc/softwareCategory?os=4063&lc=en&cc=us&dlc=en&sw_lang=&product=3795406#N397.

  Step 2:

  You can download the driver from the below website:

  32 bits:

  http://h10025.www1.hp.com/ewfrf/wc/softwareCategory?os=4062&lc=en&cc=us&dlc=en&sw_lang=&product=3795406#N203.

  64 bit:

  http://h10025.www1.hp.com/ewfrf/wc/softwareCategory?os=4063&lc=en&cc=us&dlc=en&sw_lang=&product=3795406.

  Method 3:

  I suggest you to see the site mentioned below:

  Choose printing options

  http://windows.microsoft.com/en-US/windows7/Choosing-print-options.

  If the problem persists, I'd say you can get a HP support support forums listed below:

  http://h30434.www3.hp.com/t5/Other-Printing-Questions/bd-p/Printing.

• OfficeJet 6500 e709: printer carriage stuck far right - no. paper jams

  Hello community,

  Recently my carriage of the printer on my HP Officejet 6500 E709n simply ceased to pass on the right side. I turn on my printer and he came with a message of paper jam.

  I checked and traveled all Paper Jam troubleshooting steps and the steps to move the printer, nothing helps.   said videos and done all suggested steop nothing helps.

  The last thing I printed has 3 addresses on envelopes. I have placed all three envelopes in the tray at the top of a stack of paper that was already there. The first envelope print, while the second has picked up two envelopes - but printed on the top - except, I noticed the corner of the return address, although entirely in tact, had a small spot of ink. I replaced the third envelope and it printed fine.

  Please, can someone help me solve this problem?

  @JohnnyBones, welcome to the forums!

  I read your post about the question of jam of transport that you are facing with the Officejet 6500 Wireless printer. I understand that you have already tried the recommended troubleshooting guides, I posted below, does not.

  The following suggestion I have would be to ask to HP directly to see about having the printer repaired or replaced. If the issue was fixable, the troubleshooting steps should have helped!

  1. One "original jam: clear jam and press OK"message for HP Officejet and Photosmart all-in-One Series Printer.
  2. "A 'carriage jam' or ' 0X610000F6" message for HP Officejet 6500 (E709a) and 6500 wireless (E709n and E709q) all-in-One printers

  Join our technical support to the 800-474-6836. If you do not live in the United States / Canada region, please click the link below to get help from your region number. http://WWW8.HP.com/us/en/contact-HP/WW-contact-us.html

  If you like my answer to your concern today, click on the thumb to the top below!

  Best wishes!

• iPhone5 with Officejet 655 wireless printing problem has

  IPhone 5 won't print wirelessly on Officehet 6500 a. done before, but since the update will not be

  Hello

  Sorry to hear that you are experiencing printing problems.

  You use the functions AirPrint and ePrint? The phone is able to see the printer?

  Things to check would be that the printer and the telephone are always connected to the same wifi network and that there has been no wifi password.

• MY HP OFFICEJET 6500 has PRINTS IN COLOR WHEN I SELECT BLACK & WHITE

  MY HP OFFICEJET 6500 ONLY PRINTS IN COLOR A. I USE CHROME BROWSER & WHEN I HIT CTRL-P WINDOWS PRINTING HAPPENS & I SELECT "PRINT IN BLACK & WHITE". PAGE SE SO COLORLESS TURNS, I CAN PRESS THE IMPRESSION OF CHROME, BUT MY PRINT PRINTER IS IN COLOR. HOW CAN IT BE CORRECTED SO THAT I HAVE THE ABILITY TO PRINT IN B & W.

  Hi AZGUY47,

  I'm happy that has managed to solve the problem for you, most of the time. Individual programs sometimes do not hold settings, if it is not set in the driver itself. If you have time, you can certainly try to check the updates of Chrome or uninstall/reinstall Chrome as well.

  If you feel that my previous post was a solution, would you be able to mark as one acceptable Solution to others with the same question can more easily find this post?

  Hope this helps, have a great weekend!

• OfficeJet 6500 only prints the top of the page

  Have a problem with getting my Officejet 6500 to print the entire page.  Top of the body impression seems to be running on the top of the page, as if the paper was not inserted enough away early in the cycle of printing.  Became "paper mismatch" error message briefly, but that does not appear now.  To check the installation of the printer for proper paper size (8.5 "x 11").  Was printing normally until recently.  Uninstalled and reinstalled HP web page software.  Any suggestions?

  Problem seems to be resolved!

  The printing Assembly that fits into the back of the unit was not completely seated.  There is no warning generated unit that the Assembly was not in place, just erratic behavior and various messages like "out of paper" and jamming of paper.  I recommend that if you are having similar problems, that you check carefully that the back print Assembly is properly inserted into the machine.

  Kind regards

  sciencediver

• OfficeJet 6500 has printed a full page of black streaks when copying

  My HP Officejet 6500 a prints a black page ridged when the copy of the glass or ADF. I cleaned the glass and ADF and got the same result. I can print the docs okay, it's just when I try to copy when I have the problem.

  That's the bad news, I didn't want to hear. The warranty expired 3 months ago.  (

• OfficeJet 6500 not print pdf files.

  I had this problem for a while and really need help.  My officejet 6500 not print pdf files. It gives me just a little "beep", gushes out a piece of paper and that's it!  Prints everything else very well.  Removed and installed Adobe updated software, but that did not help.

  I found that a McAfee application has been interfering and causes the error.  Removal of this application solves the problem.

• Where can I find better, more correct instructions to solve printing problems by editing prefs.js?

  Instructions of "resolve printing problems | Firefox Help, line 6. Delete all the lines in prefs.js that begin with print_ and save the file. "do not match what is actually in my prefs.js file.

  In other words, he didn't y not the lines * beginning * with "print" or "print_". However, the string of five characters 'print' is * very * many times buried deep in a line of characters, but never at the beginning of a line and rarely followed by underscore. So I have no idea what I'm actually planned to do to solve my problem.

  It seems to me that this is just a badly phrased statement that might be more appropriate for someone who is familiar with the codification and development of software, which I'm not. I don't have the time, experience or knowledge to understand. I need more literal/explicit/specific instructions.

  The printing problem I have is that I have to print via WiFi to a printer in another room wired to another computer, and Firefox seems to switch or possibly reverse scales fonts for information of margin and the text of the Web page. In other words, the title of the document, date, time, prints etc very wide and the content of the page text prints almost too small to read.

  If there is a lot of user set prefs involved that need to be reset, then it's much easier to delete related lines of the prefs.js is each of them with the button straight on the topic: config page and click Reset.
  This is the main reason (single) to edit the prefs.js file.

• Print problems with the recent update to Version 10.11.5

  Print problems with the recent update to the Version of El Capitan 10.11.5.  Cannot print to my Epson and Samsung printers after update to new IOS.  Print jobs get hooked on my Mac Pro.

  Roger 510 wrote:

  Print problems with the recent update to the Version of El Capitan 10.11.5.  Cannot print to my Epson and Samsung printers after update to new IOS.  Print jobs get hooked on my Mac Pro.

  Have you checked with Epson for an updated printer driver?