6500 not print, ejecting just blank pages

The 6500 it's print-no errors, but only blank pages come out.  Watch print preview also just a blank page.  All inks are full, then, really, don't think it's printer since preview before print empty watch.  Any ideas?

Experimentation-changed (grey print) black to print all colors and pages came out with just the part of printed color, so obviously the question is the black ink cartridge, but preview how print also shows it blank if only the black ink used?  I tried 3 different applications.

The 6500 is not printing in black ink and it has no alignment of the printhead several times.  There are no errors.  I watched a lot of suggestions on different forums and none seemed to work for everyone.

After much experimenting, I'm not sure of what went around, or if it is a combo of what I tried, but it finally works.

Here's what I did:

-wind cleaned on black ink cartridge.  The State of the computer ink isn't the real situation; need to go to the printer printer status report, and mine showed the black cartridge empty, even if it was new and full.  I guess this caused ink status report print preview to display a blank page to print.

-removed all cartridges and then went out the door-cartridge (right lever) and cleaned all the goop and ink variances using water and a soft cloth

-clean all the points of connection to the black ink cartridge

-still didn't work so partial reset (shot taken and shut off the power and then after 20 seconds, holding the key # and 3 keys on the printer and no power to the top.)  Still no go; always attack has no alignment; test pages would print color only

d ' ran computer print head clean utility and after that, chose the command 'second clean print head ".

- AND IT WORKED. !!!

I used about a quarter of the ink in the cartridges of color do all the tests, etc.

Good luck to all.

Tags: HP Printers

Similar Questions

  • printer all-in-one dell V515w ejects a blank page in the front of the print job.

    printer all in one dell V515w ejects a blank page in the front of the print job.

    printer all in one dell V515w ejects a blank page in the front of the print job.

    Hi Richard

    You should ask this question on the Dell printer support forums.

    Dell printers - Hardware and Software Support:

    http://en.community.Dell.com/support-forums/peripherals/f/3528.aspx

    Concerning

  • Network HP printer feeds a blank page between every printed page

    My HP network printer feeds a blank page between every page printed when I print from my laptop running Vista.  Printer feeds not the white pages from another laptop under XP.

    So I would appreciate any suggestions.  Thank you and happy new year.

    Thanks, but it was one of the first things I did.  In fact, what worked was to go to the printers, made folder right click and open as administrator, open the properties, open Advanced options, then open "new driver".  You can search for "Hewlett Packard" (NOT use the abbreviation HP) and download the nearest driver for my printer.  The printer now prints only what I asked with no inbetween fed additional sheets each printed page.  Yay!  Finally.

    I spent hours on the Internet, knowledge of HP basic research on the Microsoft Knowledge base.  The answer was mentioned in the update from HP for my printer, of all things!  When I read one of the updates was 'PC Printer Communication issue.'  Seemed to be yet another expression to search for an answer, but it was worth One More Try.  It worked.  http://h30434.www3.HP.com/T5/printer-all-in-one-software-and/BD-p/software  It is under the HP Support Forum.  So, it OF here!

  • OfficeJet 6500 not print pdf files.

    I had this problem for a while and really need help.  My officejet 6500 not print pdf files. It gives me just a little "beep", gushes out a piece of paper and that's it!  Prints everything else very well.  Removed and installed Adobe updated software, but that did not help.

    I found that a McAfee application has been interfering and causes the error.  Removal of this application solves the problem.

  • LR 4 prints only a blank page on the Epson 2880. Print preview panes remain blank. Window 7 OS. Desperately need help!

    LR 4 prints only a blank page on the Epson 2880. Print preview panes remain blank. Window 7 OS. Desperately need help!

    Bob

    I did uninstall another and got rid of the Preferences file. Voila! This works. I'm not crazy about not understanding why, but he works at a time when he really needs to work.

    Thanks again for your kind attention.

    Merry Christmas.

    David

  • In fact, I need help but can't find the answer. Please... Lately when it is open a new tab it does not open with a blank page. I don't want to put my home page as

    In fact, I need help but can't find the answer.
    Please... Lately when it is open a new tab it does not open with a blank page. I don't want to put my home page as empty as when I open Firefox, it automatically load my hotmail page. But then if I open other pages I don't get a blank page. Help, please?
    Thank you.

    [Personal information deleted by the moderator. Please read the guidelines and rules of the Forum, thank you.]

    Hello, please refer to customize the page new tab to turn off the function.

  • Photosmart c309a will not print documents or test pages

    I have uninstall and reinstall Full Version software, twice and I still can not print documents or test pages. I use the Photosmart C309a. Can you help me

    Georgebob

    Last updated, at 01:10, estimated the printer works now. I installed the new print head, and as a first step, I have no positive results. Then I tried the printer alignment... that did the trick. The printer works now.

    Now, I wonder if it was the culprit with the old print head (alignment) maybe it's always good. I'll hold on, events, if necessary. Thanks for your help and mucho laurels.

    Georgebob

  • Wireless HP 6500 not print / scan to Macbook

    There are several discussions about Mac and 6500's. I tried everything I think, but who knows if the order is important?

    I rubbed, reset, restarted and even cried a little looking for the magic to get a 6500 wireless print and scan from / to a MacBook Pro OS X 10.6.8 fully patched.

    I rubbed the HP software. I reset my router. I did the SSID lowercase. The printer has a dedicated IP address. I checked that the printer did not appear in the list of standard drivers OS X 10.6. I was unable to connect via wireless installation of HP by IP/connection program as it could not detect it. I've been able to connect to the printer via IP page and could he ping, but Setup HP (selection by IP) would not see it. I then connected via USB to get the drivers installed and configured.

    Once it was installed, it does see the printer via USB but not wireless. I tried to print via USB and it did not work. The error is that the network host 'xxx.xxx.xxx.xxx' is busy. I tried using the wireless and got the same error.

    The printer works from IBM (XP), Dell (XP) and laptop computers wireless HP (W7) and cable 3 PC (XP, XP, W7).

    Looking forward to this ad nauseum troubleshooting!

    Thank you.

    You can speak to netgear,

    Replace the WPA 128bits encryption

    Open port 9100 TCP and UDP

    Make sure that the multicast filter is enabled

    Have them check for any firewall that can be activated.

    It seems that we just a matter of simple port is blocked, so I would have them check first port 9100.

  • Shows HP LaserJet 3330 horizontal lines exactly each 1.5 "when you print a completely blank page

    HP LaserJet 3330 shows seven or eight approximately 3.5 "cloudy horizontal lines spaced exactly each 1.5" even when you print a completely white page. This also happens when copy and fax.

    There are also 2 very thin vertical lines running down the entire page about in the middle. They are exactly 1 "apart.

    However, a scan of a blank page on my computer (not printed) is perfectly clean.

    Windows 7. No change or upgrade.

    Propbably the toner cartridge, if they are 1.48 "apart that it could be the cylinder in the process of development or the charge roll who are both in the toner cartridge. So a good assumption if you replace the toner cartridge, the problem will disappear. Vertical lines could also be part of this issue.

  • Range of HP C5580 printer feeds a blank page before actually printing

    Hello

    For the record, I use a Compaq Presario AMD Athlon (TM) 64 Processor 3300 +, 2411 MHz/1.93 GB RAM, running Windows XP Home Edition, SP3, with IE8.

    For these last months, I've been using a HP Photosmart C5580 all-in-one printer and I am more than satisfied with its performance.

    However, in recent weeks, I have noticed that when I print anything the printer will send a page 'empty' before he really starts my print job.

    This isn't the end of the world, but I am curious (1) why this has started to happen in the last two days and (2) is at - it a setting I can change to stop this white page of previous all my print jobs?

    Thank you and best regards,

    2harts4ever

    "... enough Said." Keep smiling because I'm smiling too! »

    Howdy,

    Update: It seems that my problem is solved.  Somehow my diary was not aligned correctly.  Once I took care of that blank page is more launched first.

    Thank you...

    2harts4ever

  • Firefox does not print in complete web pages. It prints at best half left of the page. This has happened only recently. It is not my printer I get full page, printing from Internet explore and other applications. Help!

    Firefox has started printibg only the left side of a web page. I've tried the settings without success, in fact he did even smaller print area. I have set all parameters in the print menu, but can not solve this problem. How can I return to printing of entire web pages?

    Try of the reset described here:

    http://KB.mozillazine.org/Problems_printing_web_pages#Reset_printer

  • OfficeJet 6500: Officejet 6500 not printing not

    My Officejet 6500 will not print. It is in an error state. I loaded the new driver, uninstalled and installed the printer. He was going well until I installed Windows 10.  Someone at - it ideas?

    Well, this should allow you to print:

    1. If the printer is connected via a USB cable, remove it.
    2. Close any programs you have open.
    3. In your search type in printers bar and open devices and printers.
    4. Right click on all the icons in your printer listed.
    5. Click on remove the instrument.
    6. Repeat for all other icons of your printer listed.
    7. In your type of Services Research and open Component Services.
    8. On the left, click Services (Local).
    9. On the right, do a right-click on print spooler.
    10. Click on stop.
    11. Open your drive C:\, then Windows, System 32, coil, and printers.
    12. Delete everything in this folder.
    13. Return to the Component Services window.
    14. Right-click on print spooler.
    15. Click Start.

    Now, if you removed the USB cable, plug it. If this is not the case, go back to the devices and printers and click Add printer to add a new queue for your printer.

    Please let me know the results after following the above. If you are able to print, click on accept solution. If you appreciate my help, please click on the thumbs up icon. The two icons are below this post.

  • OfficeJet 6500 not print black... again

    Still, my Officejet 6500 tr does not print in black except for a word document that I have on my desk. It happened after I exchanged the cartridtges of three colors. I did the reset partial and I removed and re-installed all the cartridges and still NOTHING except for the word document.

    I really can not kept wasting time like this. HP come with a fix or I will go to another manufacturer.

    I can NOT KEEP LOOSING TIME LIKE THAT.

    I'm happy to help you and I really hope that I can get to a quick solution for you.  Now that I know that the document above did not work, I'm almost certain that this is a problem with the print head because you found on all cartridges exclamation points, and your response, it seems to happen a lot.  This print head is expensive and hard to find, so here's what seems to work for everyone...

    -Black ink does not.

    I generally do not offer soaking the print head immediately, not without some certainty.  In your case, it seems that this is the time.  I could offer document after document but I have a good feeling, that's where it will end anyway, and no more time should be wasted. You have more important to worry about (like your home) functions.  Try the steps listed above in the Bob_headrick method, and I really hope that it works.  I still have to read where it made things worse, but keep that in mind please. User discretion is advised with any unconventional method.

    If you find yourself always with remnants of ink, keep it in a ziplock bag so it won't leak or evaporate and I hear that you can store it in the freezer if you need to save it for later. And let me know how it goes!

  • Printer runs a blank page between each printed page.

    I have a HP Photosmart C7280 All in One Printer.  I use Windows 8, whenever I have to print anything, she travels around blank pages before each printed page.  If I print 5 pages, there are 5 white pages also, one between each printed page.  Can you help me?

    Baumer1960
    Thus, Baumer, all other pages is a clean sheet when you print, and it comes from any program you use. Is this fair?
  • Trying to print pages of e-mail for printer, get a blank page the printer off

    With the help of Wintdows Vista on computers anHP office and printing to a printer of C3180 HP all-in-one.  When I click on 'print', I get a blank page the printer off.

    When I do the same with my laptop (with Vista) HP, I get the printed page.

    Hi john1019,

    (1) is this problem limited to the pages of e-mail? You are able to print very well other applications?

    (2) how to access your emails?

    First of all, restart your computer once and then test to see if the problem persists

    Step 1: Run the Fixit available in the link below and test

    Troubleshooting printer problems

    http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-printer-problems

     

    If the problem persists,

    Step 2: Let me know if you can print a test page from your desktop

     

    You can print a test page to check if a printer to print graphics and text correctly. A test page also displays information, such as the printer name, model, and version of the software driver that can help you troubleshoot printer problems.

    Follow the steps mentioned in the link below

     

    A test-print page

    http://Windows.Microsoft.com/en-us/Windows-Vista/print-a-test-page

    For more information, see the link below

    Network printer problems
    http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-network-printer-problems

    Thank you, and in what concerns:

    Ajay K

    Microsoft Answers Support Engineer

    Visit our Microsoft answers feedback Forum and let us know what you think.

Maybe you are looking for

  • Connected to Server VPN in Vista, but no sharing of files

    I have a Vista VPN server running remotely.  My client is Windows Server 2003, and I want to access the files on the remote vista box. This customer also has a VPN connection to another remote Windows Server 2003 box, which works correctly. I can mak

  • Must be the power issue

    Hi all I have HP Probook s 4540 with windows 8, 1 year, now I am facing a problem. When I load my laptop its brightness increased and when I disconnect a wire load luminosity decreases but is not a problem. the problem is that yesterday when I charge

  • No Windows sound "Failed to Play Test Tone" error during the speaker test

    I have a desktop computer with a processor Intel Core 2 Duo CPU 32 - bit Windows 7 Home Premium.  It has run successfully for 2 years without any problem.  Sometimes the last month the noise stopped working.  When I try to configure the speakers I ge

  • Low battery life blackBerry BlackBerry Z10 Z10.

    My brand new z10 was meet some battery problems as I received it. The phone is only 4 hours old, and battery controller shows only 3 hours to 90%. Does anyone else have this problem and if so know how to fix? The unit would be defective?

  • I wanted to immunize my drive, so I converted the "TOOLS HP" drive to the NTFS file system.

    I have a HP mini 110-3800. running windows 7 edition, now I have backed up all the files and formatted the drive in fat32 and moved everything out there! I don't know if all the files are there so if something missing will it create any problem in th