7.1 of IntelliType Pro and MS Natural Keyboard Pro...

Similar Questions

• Volume / Mute does not not work with IntelliType Pro and ergonomic 4000 KB

  A few months ago, controls for volume/mute on my 4000 ergonomic keyboard stopped working. I searched this forum for solutions and found a number of similar problems, but none of the solutions worked on my system. Here is my configuration:

  • Windows XP SP3
  • Card SB Live PCI (audio embedded is disabled)
  • IntelliType Pro 8.15.406 software (updated 5.1; the problem began under this version)

  Here is what I tried:

  • Updated drivers SB
  • Use the original car audio system
  • Disable/re-enabling all audio devices
  • Removing the audio streaming software
  • New keyboard 4000 (not for this problem - just need a new one)
  • Return to the Bank of keys customized by default in the keyboard control panel

  None of them have worked. Any other ideas?

  Thank you...

  Chris B

  I had the same problem, after a few hours of reading, I found my problem;

  • Run "services.mcs" without the quotes.
  • Locate "Human Interface Device Access.
  • Try restarting the service is running, if it is not executed.
  • Change the "Startup type" to "Automatic" and start the service.

  I started the service, and my buttons started working again.

  I hope this helps.

• Impossible to install intellitype pro 8.0

  Hi all

  I am currently not able to install the intellitype pro 8.0 software to use for a natural ergonomic keyboard 4000 MS v. 1.0.

  When I try to run the installation file, ITPx86_1033_8.0.225.0, which is the one for Vista 32 bit I downloaded today, I get this error from the installer:

  ---------------------------
  Setup of Microsoft IntelliType Pro 8.0
  ---------------------------
  The facility must close because an error occurred. Check that your computer meets the system requirements on the packaging of the product. Restart your computer and try running the installer again. If this error occurs again, see Help on the customer support options. (Error code 1603)
  ---------------------------
  Ok
  ---------------------------

  I rebooted and tried again and the same thing happens. The keyboard uses a usb port and is usable, but special keys do not work. If I plug it into a different usb port, Vista tries to find a driver, and the keyboard is unusable at this point. I tried to disable the antivirus without result.

  There is a file with the Setup file reading, and it does not list the potential problems of error in installation, but I can't seem to do the suggested corrections. Also, the error doesn't seem to be the same.

  It is said:

  When you install the software, you will get the "Unable to install a required component" message

  When you install the IntelliType Pro software, you may receive a message saying that Setup could not install a required component. If Setup fails to install the following components, follow the relevant instructions:

  • MSXML. On the installation CD, go to the Prereq\MSXML folder, open the folder for your processor (32-bit or 64-bit) type and then run the MSI file.
  • The MSXML update patch. On the installation CD, go to the Prereq\MSXML folder, open the folder for your processor (32-bit or 64-bit) type and then run the EXE file.
  • Windows Application Error Reporting. On the installation CD, go to the Prereq\Watson folder, open the folder for your processor (32-bit or 64-bit) type and then run the MSI file.
  • Windows install. On the installation CD, go to the Prereq\WindowsInstaller3.1v2\x86 folder, and then run the EXE file.

  If you still receive an error, you may have a problem with the component itself that you must resolve before you can install the software for your device. For more information, seehttp://support.microsoft.com .

  Any of the listed here seem to apply to what I saw the hand.

  Oh, I don't have the original CD, I thought (wrongly) I could just download the updated software if I needed to.

  Any ideas?

  Hello

  Means that the error 1603 ERROR_INSTALL_FAILURE.

  Step 1: update MSXML can also be downloaded via windows update.

  http://Windows.Microsoft.com/en-us/Windows-Vista/install-Windows-updates

  So I suggest to update your computer via windows update, then reinstall the drivers.

  Step 2: To remove and then reinstall the drivers, follow these steps:

  (a) disconnect the device from the computer.

  (b) cut the power to the device, if the device has a separate power supply.

  (c) open Device Manager. To do this, use one of the following methods:

  (d) click Start, type of aircraft in the area start search and then click on Device Manager in the list programs. If you are prompted for an administrator password or a confirmation, type the password, or click on allow.

  (e) double-click keyboard, right-click on the keyboard you are using, and then click on uninstall.

  Note: If your device is not listed, it means that the device was removed automatically when you disconnected the device. Go to the next step.

  (f) restart the computer.

  (g) first, turn on the device, if you have to and then connect the device to the computer. Your computer detects the device and then reinstall the drivers for the device.

  http://Windows.Microsoft.com/en-us/Windows-Vista/update-a-driver-for-hardware-that-isn ' t-work correctly

  Diana

  Microsoft Answers Support Engineer

  Visit our Microsoft answers feedback Forum and let us know what you think.

  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• "Microsoft IntelliType Pro does not" block on Start Up

  On startup, I get a block which informs me that Microsoft IntelliType Pro is not working. It is said to uninstall and reinstall. Can you please give me the steps to do this? My computer keeps blocking off without reason. This seems to be a concern that MS has when he started upward with repairs.

  Hi Paul,.

  1. are you able to boot into normal mode after receiving the error message IntelliType Pro or the system blocking him Guard off?

  2 did you a recent software or hardware changes to the system?

  If you are able to boot into normal mode, you can see method 1 of the following article to uninstall and reinstall the intellitype software.

  Troubleshoot installation of Intellipoint and IntelliType LifeCam software

• pro__intellitype IntelliType Pro does more (error msg) - 64 bit Vista Home. Just installed Microsoft keyboard/mouswe set, laser 6000 - intellitype pro still does not.

  IntelliType pro
  IntelliType pro

  Hi Grosher,

  Welcome to the Microsoft Answers site!

  1. from when are you facing this problem?

  2. is the keyboard and the mouse does not?

  Try the following methods.

  Method 1

  Resynchronize your device with the receiver

  1. Press the button on the receiver and check that the light on the receiver starts flashing.
  2. If a dialog box appears on the screen in seconds, follow the instructions that appear on the screen. Otherwise, continue to the next step.
  3. Press and release the Connect Channel button on the bottom of the mouse or the keyboard.
  4. Check the green light on the receiver. A continuous green light means that the synchronization was successful. If the problem persists, repeat steps 1 to 4.
  5. For the Wireless Notebook Mouse: this issue can occur if the micro-switch on the bottom of the mouse is not released. Use a PIN or pen to try to release the button, if it is pressed.

  Method 2

  un) try different ports

  To determine if the problem is related to the ports on the computer, use only the two cables provided with the wireless desktop receiver or the cable that is provided with a mouse.

  b) USB keyboard and USB mouse

  If the USB cable is connected to a USB hub, disconnect the device from the hub, and then plug it into a USB port on the computer. If your device is already connected to a USB port on the computer, try to connect the device to a different USB port if available.

  c) try the keyboard and the mouse on another computer

  d) change the batteries

  e) to recharge the batteries

   

  Method 3

  Reinsert the batteries or install fresh batteries

  Both the wireless keyboard and the wireless mouse rely on AA alkaline batteries for power. Remove the batteries and then insert them again. If the problem persists, install a new set of batteries in the unit that you have problems with.

  Method 4

  Install the latest version of the software

  If you are troubleshooting a wireless mouse, download and install the latest version of the Microsoft IntelliPoint software. For more information about IntelliPoint software, see the Microsoft Web site at the following address:

  http://www.Microsoft.com/hardware/download/DownloadResult.aspx?category=MK&type=trackball&name=t_to15&OS=WVista_32&lang=en (http://www.microsoft.com/hardware/download/DownloadResult.aspx?category=MK&type=Trackball&name=t_to15&os=WVista_32&lang=en)

  If you are troubleshooting a wireless keyboard, download and install the latest version of the Microsoft IntelliType software. For more information about IntelliType software, visit the Microsoft Web site at the following address:

  http://www.Microsoft.com/hardware/download/DownloadResult.aspx?category=MK&type=trackball&name=t_to15&OS=WVista_32&lang=en

  Method 5

  Manually reinstalling drivers

  To remove and reinstall the drivers, follow these steps:

  1. Disconnect the device from the computer.
  2. Cut the power to the device, if the device has a separate power supply.
  3. Open the Device Manager. To do this, use one of the following methods:
     • In Windows Vista, click on start toreduce this includes this image, type device in the Search box, and then click Device Manager in the programs list. If you are prompted for an administrator password or a confirmation, type the password, or click allow.
     • In Windows XP, click Start, click run, type devmgmt.mscand then click OK.
  4. Double-click keyboard, right-click on the keyboard you are using, and then click Uninstall.

     Note If your device is not listed, this means that the device has been deleted automatically when you disconnected the device. Go to the next step.

  5. Restart the computer.
  6. Once again the power supply, if you have to and then connect the device to the computer. Your computer detects the device and then reinstall the drivers for the device.

  For more information on these methods, you can go through the items listed below

  The Microsoft wireless keyboard or mouse does not work as expected or respond intermittently
  http://support.Microsoft.com/kb/838398

  Microsoft USB wired keyboard is not responding or the types of wrong characters
  http://support.Microsoft.com/kb/258826

  After several weeks of typical use, a Microsoft wireless device may stop responding
  http://support.Microsoft.com/kb/322609

  Hope this has been helpful,

  Kind regards
  Bindu S - Microsoft Support
  Visit our Microsoft answers feedback Forum and let us know what you think

• When Intellitype Pro 7 uninstalling Logitech G11 multimedia keys stop working.

  I just upgraded my MS Comfort Curve 2000 to a Logitech G11 keyboard. Multimedia keys work correctly with Intellitype Pro 7 is installed, but I need this more. Have installed the Logitech software but when I remove ITP 7 on my G11 multimedia keys stop working. I tried several times and they won't work with ITP 7 deleted.

  What is ITP 7 to my XP Pro SP3 system to stop the multimedia keys when ITP is removed.

  XP forums:

  http://social.answers.Microsoft.com/forums/en-us/category/WindowsXP

  Link above is for XP Forums.

  There is a list of the different Forums XP to the link above to help you.

  You get the help you need there.

  Here is the Vista Forums.

  See you soon

  Mick Murphy - Microsoft partner

• 4000 intellitype pro keyboard has stopped working

  I get an intellitype pro has stopped working when I start. Keyboards zoom and undo function has stopped working. I tried like a lot that I can but still nothing

  Hello

  I suggest you to follow the steps in this link and check if it helps:

  http://support.Microsoft.com/kb/838398

  It will be useful.

• Microsoft Natural Keyboard 4000 keyboard shortcuts accidentally mapped on arrow keys and ordinary letter

  My natural 4000 keyboard started acting yesterday: C key starts my web browser, the left arrow button toggles the current window and exit mode full-screen, the down arrow key opens the console of "developer tools" on my browser (both for Chrome as Firefox), and the right arrow key opens the context menu for the active window (i.e. the window that opens when I right click on the window). These all correspond to the functions in the shortcut bar upper keyboard of my keyboard, which still works as usual.

  I don't know how it happened - running Win7 Pro 64-bit and the problem occurred after that I have spammed the letter keys while running an emulator (Mednafen - http://mednafen.sourceforge.net/) to find out how to open a menu.

  I managed to turn off most of my shortcut keys, after that some of the problems have been resolved (for example, I disabled the Web/Home hot key and now my C key opens is no longer the web browser either), but I can't to remap the arrow keys, which makes the text written in a quite heavy browser (I now use the mouse instead of the arrows).

  More information on my system: I use a Logitech Anywhere MX mouse with Logitech Unifying receiver plugged on one of the USB ports on my PC.

  I tried to uninstall my device keyboard drivers reinstall and uninstall my mouse device drivers and restart my PC with the system detached Logitech receiver. Had no effect.

  Any advice as to how I might solve this problem? I'm a bit puzzled and considering retirement finally my Natural Keyboard keyboard (although I'd rather sad having to do) if I can't find a solution.

  Hi, Ahmed.

  This problem may occur if there is a problem with the USB connection on your computer. This problem can also occur if a third-party keyboard control utility is running on your computer. This problem occurs because the analysis codes issued by the keyboard are interpreted differently by each keyboard control utility. It can also be due to having default unexpected or redefined for keys program assignments. Many of the default assignments require that you have installed a program in particular, or you are using an e-mail program supported, Internet browser or media player.

  You can consult the following Microsoft articles and check if it helps.

  Assign the macro or function to your keyboard

  http://support.Microsoft.com/kb/237179

  Fix shortcuts or Volume control keys not working not not on Microsoft keyboards

  http://support.Microsoft.com/kb/932875

  Registry warning

  To do: Important This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:

  322756 (http://support.microsoft.com/kb/322756/)

  How to back up and restore the registry in Windows

  You can also see the following for more information Microsoft article.

  Troubleshoot wired keyboards that do not or only the erroneous characters category

  http://support.Microsoft.com/kb/258826

  If the problem persists, contact Microsoft Hardware Support.

  http://www.Microsoft.com/hardware/en-us/support

  I hope this helps.

  Please report if the problem persists and we will be happy to help you further.

• How do you get a Microsoft Natural Keyboard Pro keyboard work with Windows 7?

  How do you get a Microsoft Natural Keyboard Pro keyboard work with Windows 7 on a Dell Inspiron 620? I got an adapter so it connected to the USB port, but the computer does not recognize it.

  Hello

  It seems to be that the driver is not compatible with Windows 7, so I suggest you to download and install the keyboard driver in Windows 7 by choosing the level of compatibility of Windows XP:

  http://www.Microsoft.com/hardware/en-us/d/Natural-Keyboard-Pro

  For your reference:

  Make older programs in this version of Windows: http://windows.microsoft.com/en-us/windows7/Make-older-programs-run-in-this-version-of-Windows

  http://Windows.Microsoft.com/en-us/Windows7/what-is-program-compatibility

  Hope this information is useful.

• Cannot use keyboard IntelliType Pro 5.0 with Windows 7

  Original title: Hi, help upgrade IntelliType Pro 5.0

  I have a keyboard and wireless mouse. It's an Intellitype Pro 5.0. I now have a new computer which has windows 7. My wireless keyboard installation disc does not support and I can't find an update of the software, can anyone help me?

  Hello

  Welcome to the Microsoft community!

  You cannot use the keyboard Intellitype Pro 5.0 with Windows 7.

  I want you to know that this keyboard is not supported on Windows 7.

  See the site:

  Software version of keyboard IntelliType Pro 5.0 for Windows XP and Windows 2000

  http://www.Microsoft.com/en-in/Download/details.aspx?ID=9031

  However, you try to install the driver available in the site, in compatibility mode.

  See the site:

  Make older programs in this version of Windows

  http://Windows.Microsoft.com/en-in/Windows7/make-older-programs-run-in-this-version-of-Windows

  I hope this helps. If you need assistance or if you have problems of Windows in the future, let us know and we would be happy to help you.

• I just picked up a 12 inch I have pad PRO and bought a keyboard provided by Apple, however I find that the base remains unstable and keeps the hustle when you type, the seller it says it's a design flaw. Can someone tell me if this is the case?

  I just picked up a 12 inch I have pad PRO and bought a keyboard provided by Apple, however I find that the base remains unstable and keeps the hustle when you type, the seller it says it's a design flaw. Can someone tell me if this is the case?

  find it hard to imagine that Apple could sell these defective products.

  If the seller is an authorized Apple reseller, an independent company,

  You may need to ask you if you could see & try a different product sample

  because you might be looking at something that has a defect.

  {According to the related help page, Type position should be more

  stable to use. However if the keyboard is not flat, this sounds like default.}

  Sounds as if you're not at the official Apple Store (apple retailer)

  but, on the contrary, are somewhere else. Could you give more information?

  Some keyboard accessories are made by third party companies; so

  If the product has an Apple product model number, we note here.

  When considering the purchase of an accessory, it's a good idea to test

  and check in the store before you buy. An official Apple Store has

  a different return policy as an independent reseller of Apple.

  Don't know if I can be useful; These chat rooms are usually Apple

  users of products such as yourself, who have taken their unpaid time

  to see if they can help the other users of the product.

  Good luck...!

• The case and the smart keyboard will work together on an iPad pro

  The case and the smart keyboard will work together on an iPad pro

  Hi there drew6216,

  Looks like you're wanting to know if the Smart keyboard accessory is compatible with the iPad Pro. Do you mean this product?

  Smart keyboard for iPad Pro

  If so, then Yes, it was made for the iPad Pro. If I misunderstood the question can you please clarify for me a little?

  Thank you for using communities of Apple Support, beware!

• Microsoft Sidewinder x 4 keyboard and program Microsoft Keyboard in Vista

  I just connected a Microsoft Sidewinder x 4 keyboard in Vista after installing Intellitype 7.1.  The Microsoft Keyboard program continues to show an old "Wireless Desktop Elite Keyboard' as a default. I changed the Sidewinder keyboard, but as soon as I click OK in the Microsoft Keyboard window, it restores the old wireless keyboard (is no longer attached) when I opened the window. I uninstalled all the keyboards in the Device Manager and rebooted Vista.  I have also uninstalled and reinstalled Intellitype with no luck. Can someone help? Thank you.

  Yep, a clean install would do :-)

  A test, I plugged my X 4 my laptop Win7. He found as a "composite input device", but the bank lights do not come, so I guess that it relies on the software to make them work. I didn't install Intellitype, so I still think there is a problem with the installation of the software on your computer. You can download and install Revo Uninstaller, I have mentioned earlier, it allows to eliminate all traces of Intellitype, reboot, and reinstall. I think that even without the software installed, there will be always an HID input device listed in Device Manager, but not two. If I had the PC here, I would like to try it, but I'm in no hurry for the time or anything since I am retired :-)

  SC Tom

• My iMac cursor is stuck in the upper left corner of the login screen and I can't move it and now I can't use my iMac. What can I do? My iMac is a 27-inch 2014 release (one thin without retina display) and uses the keyboard and wireless mouse.

  My iMac cursor is stuck in the upper left corner of the login screen and I can't move it and now I can't use my iMac. What can I do? My iMac is a 27-inch 2014 release (one thin without retina display) and uses the keyboard and wireless mouse. It runs OSX Mountain Lion (not sure which version) and is a model 27 inches.

  have you tried to change the batteries in the mouse?

• Laptop HP Touchsmart 15-D020: how to remove and replace the keyboard on laptop HP Touchsmart 15-D020NR

  I spilt a drink on my keyboard and now I can not turn off the caps lock and a number of keys does not work. I need instructions on how to remove and replace the keyboard frame. Thank you.

  On your page of support-look for Maintenance and Service of Guide in the manuals.

  http://support.HP.com/us-en/product/HP-15-D000-TouchSmart-notebook-PC-series/6627588/model/6761859/manuals