7.1 surround back speakers - str-dn1030 are considered "up front."

Similar Questions

• STR-DN1030 can't make Airplay connect to my iphone or ipad?

  Hello

  I've only had this receiver a month or two, and there has been a few occasions where I had success with it, but most of the time if I try to use my iphone (4 s) or (3) to disseminate with airplay, it connects to the receiver.

  It seems 'try' every time, as my phone change controls temporarily (volume slider moves, music playback may stop sometimes but not others and icon airplay on changes in white with orange sometimes phone) but no music of the alembic of amp, and it then just stop trying.  Even after 20 attempts on a given ios device, it does not work with airplay.

  I have a very good wifi signal in my house and also the receiver is connected to a gigabit LAN so avoid any problem with connectivity like that if it is used in this process (guessing airplay may directly amp phone?).

  Any suggestions I can try?  Network streaming works ok, but it's much more tedious so I not really bother.

  Another question - a UK client, my amp doesn't have Bluetooth and I'm really gutted that I only discovered this after buying.  I REALLY want this feature, so please could someone explain to me why you miss on bluetooth, simply because we are in England?

  Thank you very much.

  Hi Cretster,

  What is the router that you use, and is the firmware updated?

  Some routers may have a time difficult, send and receive information for network broadcast even though you mentioned that the DLNA works very well.

  The same thing happens with any Android or Windows based OS?

  IOS devices are updated to the latest firmware on the Apple site?

  Two iOS devices trying to connect the receiver at the same time when you use Airplay?

  When you have these problems, iOS devices still show the STR-DN1030 as an adjustable device for Airplay streaming, or the device disappears it?

  You mentioned that the STR-DN1030 is connected to a LAN Gigabit Ethernet. You have connected the device directly to the router? If this isn't the case, then is it possible?

  You can reply back with them questions so that we can consider the situation further, or if my post answered your question, please mark it as an "acceptable Solution".

  Thank you.

• "No speakers or headphones are plugged."

  After a reinstall of windows 7, none of the external speakers work.  The reason given is "no speakers or headphones are plugged."

  What I tried:

  -Enter in the BIOS to make sure that the integrated audio system is selected (instead of link to my video card)

  -Redownloading drivers (all are currently being updated)

  A few notes:

  -Under 'Read' in the control panel > Sound, "Digital Audio (HDMI)" appears with "not connected."  There are no other options to select.

  -My USB headset works perfectly - is that the external audio is not working.  The plugs at the front and the back of the computer both don't work (which I tested with multiple devices).

  Data for the audio device are listed here:

  Name High Definition Audio Device

  Manufacturer Microsoft

  ID of device PNP HDAUDIO\FUNC_01 & VEN_1002 & DEV_AA01 & SUBSYS_00AA0100 & REV_1001\5 & 17DD3F07 & 0 & 0001

  Thanks for the tips - I downloaded the codecs and it works fine now. (Here: http://www.asrock.com/mb/download.asp?Model=N68-S%20UCC&o=All)

• STR DN1030 GUI

  Y at - it an upcoming software update for better graphics on the STR DN1030 GUI?

  Software update helps to improve the features and characteristics of a product and can also provide patches of service for specific questions. An update details are always available on our esupport site according to the model number of your device.

  Currently, there is no update software is available for your receiver to the homepage of STRDN1030 . In addition, we have no access to information on future versions of the software updates.

  If my post answered your question, please click "accept as a Solution.

• How to connect the Nintendo Wii to my STR-DN1030?

  Hello

  I recently bought a STR-DN1030 and I have a question now to get the Wii audio. I use a RCA cable with video connector 3 (red/green/blue) and 2 audio connectors (red/white). What I want is for the audio and video get the amp with RCA and out to the TV via the HDMI TV OUT cable.

  So I plugged the video connector 3 RCA to "Component video - SAT/CATV (2)" and tried to connect the 2 RCA audio connector to "Audio in" (sat/catv) but I have no sound, even if I get the picture.

  On the allocation of entry for the video source (I choose video 1) I put the video on computer.  and audio analogue.

  Can you tell me how can I connect the Wii RCA component cable so I can get the video on TV via HDMI and the sound of the amp?

  Thanks for your help.

  Try to use the sockets labelled AUDIO IN TV to the AV STR-DN1030 receiver. If the same problem persists. Please provide the following information:

  1. What is the brand name of your television? If it's a Sony, which is the full model number? If it is other than Sony, is able in your TV Audio Return Channel (ARC)? (pages 26 and 27 of the Manual)
  2. If your TV isn't capable ARC , so you can connect an optical cable from the receiver to the TV.
  3. If your're TV's able ARC , does not sound problem occurs on all video games Wii that you tried? Do you get sound when the Wii is connected directly to the TV using the same red and white strings?
  4. Do you get sound when playing another source like bluray player, decoder, etc. ?
  5. Are all stakeholders affected or just some of them?

  Please follow the steps in troubleshooting here.

  If my post answered your question, please mark it as "accept as a Solution.

• HE can't get my network wireless on my STR-DN1030 to work.

  I can't my network wireless on my STR-DN1030 to work. When you select settings/network, it will not bring up needed for the wireless configuration screens. It goes straight in the last entry on that I was.

  You hit the right arrow to move to the next step of the installation?

  So you're poorly understand the buttons and hit the wrong keys. Then please list the exact steps you do in order. Include the name of each menu item and button you choose at each step. So I can try to understand what can be the cause of the problem.

• No sound - "no speakers or headphones are connected.

  original title: Sound

  Hi I have a problem with the sound on my Sony Vaio.

  The audio icon displays a red x and when I move my cursor it happens with the text next message "no speakers or headphones are connected" could please help me.

  ~ Denise ~

  Hello

  1. are you you can hear sounds in Windows even if there is a red X mark?
  2 have you made any changes to the computer before the show?

  3. you are trying to play sounds through internal speakers?

  You can perform the following methods and check if it helps to solve the problem.

  Method 1: Run the audio troubleshooter.
  Open the Audio playback troubleshooting utility:
  http://Windows.Microsoft.com/en-us/Windows7/open-the-playing-audio-Troubleshooter

  Method 2:
  If the audio functions work correctly, I suggest you return the item.
  In Windows 7 a red "X" may appear on the speaker in the notification area icon, even if the audio output correctly functions: http:/support.microsoft.com/kb/2011656

  Method 3:
  If the problem persists, perform the steps described in the article.

  No sound in Windows: http://Windows.Microsoft.com/en-us/Windows/help/no-sound-in-Windows

  See also:

  Tips for solving common audio problems
  http://Windows.Microsoft.com/en-us/Windows7/tips-for-fixing-common-sound-problems

  I hope this helps.

• no speakers or headphones are connected

  Hello! I have HP pavilion dv5 un2420, im suffering from a problem of noise... .the icon in the system tray program (x) volume on, and giving the indication to this statement that no audio device is turned on, I uninstalled the driver from Device Manager and after hibernation the volume icon indicates no speakers or headphones are connected now tell me it is a software problem or hardware, im so exhausted! Please help me out of this *.

  Hello

  You did changes to the computer before the show?

  I suggest you try the steps from the following link:

  Tips for solving common audio problems
  http://Windows.Microsoft.com/en-us/Windows7/tips-for-fixing-common-sound-problems

• DOESN'T HELP WINDOWS 8 NO SOUND! DON'T KEEP SAYING THE NO SPEAKERS OR HEADPHONES ARE PLUGGED IN!

  CAN SOMEONE PLEASE HELP ME UNDERSTAND WHY, AFTER A RESTORE! I DON'T HAVE SPEAKERS OR HEADPHONES SOUND IT JUST CONTINUES TO ME SAYING THAT IT NOT PLUGGED AND THEY ARE TOTALLY?  IV ' E MADE THE DISORDER SHOOT SEVERAL TIMES HE ALWAYS REPEAT MYSELF THAT NO SPEAKERS OR HEADPHONES ARE PLUGGED! I HAD HER JUST BEFORE THE RESTORATION IT IS MESSED UP SO MY COMPUTER IS WINDOWS 8 GATEWAY DESKTOP MODEL... DX4375

  ALL INFORMATION IS GREATLEY APPRECIATED :(

  Me_26

  Uninstall the current driver, then install a new one (even if it is the same date)

• CAN´t access my files on creative cloud. "Temporarily unavailable page. We will be back soon. "' We are working quickly to resolve the problem and apologize for the delay." Check back later or visit our website for updates of status. In addition, you can

  Hello

  Since a few days I tried to access my files on web creative cloud without success. I ve had this message only:

  "Temporarily unavailable page. We will be back soon. »
  "We are working quickly to resolve the problem and apologize for the delay."
  Check back later or visit our website for updates of status.
  In addition, you can get help in forums of the creative cloud.
  Thank you for understanding! »

  (I used Google Translate)

  Help someone?

  Not sure if you've managed to solve this problem yet or not. I do not no what are the contents of your proxy script, but it's something that you (or your company) you have to solve.

• Area-51 R2, Front/Rear Panel Audio problems

  The audio jacks on the front panel will have on struggling audio back panel.

  So if I plugged in front back speakers and headphones plugged in front panel, I hear speakers AND headphones.

  When I checked the control panel windows (Sound - reading devices), there was only a single 'speakers', ' helmet '.

  Then I checked Sound Blaster Recon3Di configuration and the front panel and panel back taken were all lit and works well, but it wouldn't separate the sound from the rear panel and façade.

  Then... I deleted the Sound Blaster Recon3Di driver, and now it works as it should...

  Now there are "Speakers" and "Headphone" in the list of playback devices. But now "What U Hear" does not appear in the recording devices :(

  Can someone help me? I tried to delete the driver and clean reinstall the driver, but it wouldn't separate the front and back audio.

  Lunch a Update driver yesterday, if it please try and let me know if it works.

• I have Firfox 18.0.1. On a single Web site my usercode and password entries are considered not valid. The same words and password work fine in IE and Google.

  On a single Web site my usercode and password entries are considered not valid. The same words and password work fine in IE and Google.

  I found that my Norton Toolbar had been disabled so I enabled it. When I tried the site it worked. Go figure.

• The amount of storage iCloud influences the amount of songs, you can download while being subscribed to iTunes game? Or are considered two different storage plans?

  The amount of storage iCloud influences the amount of songs, you can download while being subscribed to iTunes game? Or are considered two different storage plans?

  Hello

  iTunes game uses no storage iCloud. iTunes game limit is now 100 000 securities.

  Jim

• SMC100 LabVIEW drivers are considered to be "mark Points.

  Hi all

  I try to install the SMC100 device drivers

  The pilots of the SMC100 controller has been developed under LABVIEW 6.1.

  So I installed LABVIEW 6.1 also. runtime engine.

  I installed the drivers (in the link below) in the file "instr.lib" as requires it.

  FTP://download.Newport.com/MotionControl/current/MotionControllers/SMC100/software/

  When I open the schema-block (range of functions), the SMC100 pilots are considered question mark as in the joint photo.

  I use Win7 32 BIT, LabVIEW 2009, as well as

  * My camera always on the way from the USA to the Turkey, so I do not connect the SMC100 device my PC again. Is - this smthg to do with it? Should I connect the device to install the drivers?

  Try mass compiled file with the drivers.  If the drivers have been downloaded without the patterns of principle, then you will not be able to compile, because the source code is missing.

  Lynn

• I just created a new 'user account '. Now all my files are considered to be "hidden".

  original title: hidden files

  I just created a new 'user account '. Now all my files are considered to be "hidden". "I have thousands of .psd and jpeg files). Is it possible to change this for all files in that account without having to access each?

  I don't know what caused the problem, but you can go to control panel | Folder options | Display and enable the display of the hidden files and folders.

  Steve