STR DN1030 GUI

Similar Questions

• 7.1 surround back speakers - str-dn1030 are considered "up front."

  I bought the STR-DN1030 as a replacement for another amp 7.1 flaw. After you have connected, my Surround 7.1 Back speakers are treated as "high forehead.

  I can set up as 5/2.1, but then the surround back speakers are calibrated correctly and have the height of output instead.

  The test for this output tone labels 'high front.'

  Shouldn't be able to choose 7.1 as my configuration option.

  How can I fix this so that they properly Surround Back?

  The assign SB setting is 'off '.

  The front of the speakers before a selected device (no others are possible)

  Honestly, the menu interface is clunky and non-intuitive. I spent a few hours without being able to understand. The non-geek consumer would be certainly more frustrated than i. spend two days on this make me rethink my choice of replacement.

  Hello Dan,.

  Change to 3 speaker model / 4.1 then perform auto calibration.

  If my post answered your question, please mark it as an "accepted Solution".

• HE can't get my network wireless on my STR-DN1030 to work.

  I can't my network wireless on my STR-DN1030 to work. When you select settings/network, it will not bring up needed for the wireless configuration screens. It goes straight in the last entry on that I was.

  You hit the right arrow to move to the next step of the installation?

  So you're poorly understand the buttons and hit the wrong keys. Then please list the exact steps you do in order. Include the name of each menu item and button you choose at each step. So I can try to understand what can be the cause of the problem.

• STR-DN1030 can't make Airplay connect to my iphone or ipad?

  Hello

  I've only had this receiver a month or two, and there has been a few occasions where I had success with it, but most of the time if I try to use my iphone (4 s) or (3) to disseminate with airplay, it connects to the receiver.

  It seems 'try' every time, as my phone change controls temporarily (volume slider moves, music playback may stop sometimes but not others and icon airplay on changes in white with orange sometimes phone) but no music of the alembic of amp, and it then just stop trying.  Even after 20 attempts on a given ios device, it does not work with airplay.

  I have a very good wifi signal in my house and also the receiver is connected to a gigabit LAN so avoid any problem with connectivity like that if it is used in this process (guessing airplay may directly amp phone?).

  Any suggestions I can try?  Network streaming works ok, but it's much more tedious so I not really bother.

  Another question - a UK client, my amp doesn't have Bluetooth and I'm really gutted that I only discovered this after buying.  I REALLY want this feature, so please could someone explain to me why you miss on bluetooth, simply because we are in England?

  Thank you very much.

  Hi Cretster,

  What is the router that you use, and is the firmware updated?

  Some routers may have a time difficult, send and receive information for network broadcast even though you mentioned that the DLNA works very well.

  The same thing happens with any Android or Windows based OS?

  IOS devices are updated to the latest firmware on the Apple site?

  Two iOS devices trying to connect the receiver at the same time when you use Airplay?

  When you have these problems, iOS devices still show the STR-DN1030 as an adjustable device for Airplay streaming, or the device disappears it?

  You mentioned that the STR-DN1030 is connected to a LAN Gigabit Ethernet. You have connected the device directly to the router? If this isn't the case, then is it possible?

  You can reply back with them questions so that we can consider the situation further, or if my post answered your question, please mark it as an "acceptable Solution".

  Thank you.

• How to connect the Nintendo Wii to my STR-DN1030?

  Hello

  I recently bought a STR-DN1030 and I have a question now to get the Wii audio. I use a RCA cable with video connector 3 (red/green/blue) and 2 audio connectors (red/white). What I want is for the audio and video get the amp with RCA and out to the TV via the HDMI TV OUT cable.

  So I plugged the video connector 3 RCA to "Component video - SAT/CATV (2)" and tried to connect the 2 RCA audio connector to "Audio in" (sat/catv) but I have no sound, even if I get the picture.

  On the allocation of entry for the video source (I choose video 1) I put the video on computer.  and audio analogue.

  Can you tell me how can I connect the Wii RCA component cable so I can get the video on TV via HDMI and the sound of the amp?

  Thanks for your help.

  Try to use the sockets labelled AUDIO IN TV to the AV STR-DN1030 receiver. If the same problem persists. Please provide the following information:

  1. What is the brand name of your television? If it's a Sony, which is the full model number? If it is other than Sony, is able in your TV Audio Return Channel (ARC)? (pages 26 and 27 of the Manual)
  2. If your TV isn't capable ARC , so you can connect an optical cable from the receiver to the TV.
  3. If your're TV's able ARC , does not sound problem occurs on all video games Wii that you tried? Do you get sound when the Wii is connected directly to the TV using the same red and white strings?
  4. Do you get sound when playing another source like bluray player, decoder, etc. ?
  5. Are all stakeholders affected or just some of them?

  Please follow the steps in troubleshooting here.

  If my post answered your question, please mark it as "accept as a Solution.

• 2 questions about Sony STR DN1030

  First of all, how can I activate AirPlay without turning on the TV at the same time? I have a Sony's Bravia TV. I tried to change the HDMI settings but did not understand right now.

  Secondly, one of the reasons why I bought this unit was because it supports the reading of Zone 2. I called Sony to ask about it before you buy it and was assured that she had the ability. However, I find now that Zone 2 does not work with AirPlay, which was the main reason I wanted. Someone has understood how to play Airplay through Zone 2?

  Hello

• STR-DN1030 goes into sleep mode when turning on the TV is turned off

  Why, when I turned my TV off my receiver will automatically in standby mode? Sometimes, I want to continue to play even after I have turn off the TV.

  It is a function called "control for HDMI" energy saving. TV tells you your receiver it stops and that the control is on the receiver does the same. You must disable the TV or receiver.

• Output STR - DN1030 HDMI to the TV does not

  The HDMI to the TV stopped working after a recent power outage.  I had the receiver for about 1 year and it has worked perfectly.  The inputs work fine.  Sound of DVR and BD are working properly.  However, the video output to the TV does not work.  I tested the cables and the TV by hooking directly to DVR & BD.  I had always hung on a surge protector and there is no damage to any other components.  I don't know what the problem is.

  I tried to reset the receiver as described.  It is passed by the method of COMPENSATION.  The output still does not work.  However, another problem arises.  The receiver and the display now rock SAT/CATV normal to LPCM [48] and DOLBY DIGITAL 5.1.  When the switching noise to cancel.

• AirPlay works do not with Sony STR-DN1030

  For some reason any airplay does not appear on my device more.  It allows to work properly any suggestions?  I have confirmed that I am connected on the network even with a good wireless connection.

  Thank you

  Follow the steps below to solve the problem.

• Remote STR-DN1030 code

  I need the code for the audio/video receiver, so I can program my cable box remote to control the volume.

  Hi Ghaupt,

  Unfortunately, we are unable to provide support for remote controls designed by other manufacturers. Manufacturers may set different code numbers in their remote controls to identify the infrared (IR) signal of a Sony product. Thus, the code number used to operate a Sony product in one remote can be different from the one used by another.

  For more information about programming for the cable box remote to operate Sony A / V receiver, contact the manufacturer of the remote control.

  If my post answered your question, please mark it as an "accepted Solution".

• BD/DVD only gets speaker TV sound when connected to 1030 STR - DN

  I connected my Panasonic BD. DVD player to Sony STR - DN1030 AV receiver and can't get audio through the TV speajers. No Dolby sound. This applies to DVD and BD media. The work of BD/DVD palyer very well with other systems in my house. Y at - there a special setting that I must apply in the menu of the receiver are getting a system audio sound?

  Receiver AV plays well with the TV Sony and Netflix, it is only with the BD/DVD player that there is a problem.

  maybe go into playback sound TV GUI and diaable...

  Make sure that also in the Chamber his game to HDMI (BD player) too... and also set in the Passthru Chamber...

  Who should do it

• I can't get my SONY receiver to play itunes from my PC via BLuetooth

  I have a SONY STR-DN1030 which built in tooth of drunk. I have the paired successfully with my PC. Both devices calim to be connected and to see each other. The SONY is connected as a Bluetooth stereo audio headset. But when I try to play i-tunes by the sysem, music is played on the computer. I have a Dell Studio on Vista 64.

  My HTC Android phone connects very well with the SONY

  Hello

   

  Thanks for posting the question in the Microsoft Community!

  You are unable to get sound via Bluetooth, inside Sony.

  The problem can occur if you did not select the default device for sound.

  To set up an audio device by default:

  (a) click Start and Control Panel.

  (b) click on hardware and sound then Sound.

  (c) under the playback, select the device, and then click set as default down.

  I hope this helps. If the problem persists, or if you have problems of Windows in the future, let us know and we would be happy to help you.

• Play Playstation 3 and all of a sudden, everything went red. A opted for tv/decoder

  I have a Sony STR-DN1030, Playstation 3, I played when all of a sudden, the colour is turned to red. A opted for tv / box of cable and the same thing. So I connected the HDMI cable to the tv and that's fine. Something to do with the box of Sony... He used either even switch to graphical mode. any help would be greatly appreciated.

  1. Yes the two hdmi high speed.
  2 and 3. I have used all 3 of my hdmi cables and they all worked when not passing is not by the receiver.

  I have reset to factory default on the receiver and the TV. Has gone through all the steps of troubleshooting with someone on Sony esupport last night.

• I get no sound through my DN1030 STR watching netflix via a chip/wi-fi tv

  I get no sound through my DN1030 STR watching netflix via a chip/wi-fi tv. I have fron Panasonic Plasma tv HDMI cable receiver. Do I need an optical cable receiver TV since I get netflix through my wi - fi tv?

  Thank you

  Well I just plugged an optical cable from the tv receiver and it worked! IM always open to suggestions if anyone has a better solution, but for now it seems to work.

  Thank you!

• Remote control Medai vs STR-DN1040 cannot change the source?

  I just installed my Sony STR-DN1040 home theater receiver and have a few questions about the media remote ap...

  (1) I have it all connected and registered and the ap is functional, but in "remote mode", it lists all entries in my (BD, cable/satellite, DVD, FM, etc) as buttons, I can support on and they light up and make a tone of confirmation on my iPhone 4s, but they do not change the source to the receiver.  The rest of the features seem to work and if I use the media remote ap for go to the GUI menu, I can arrow over 'look' and then select a source, and that works fine.  The problem is when you are in another room and want to power on the receiver, then choose an audio source and play without having to turn on the TV or be in this room, you can't (or at least I can't) because the hot-key source on the ap do nothing.  What did I miss?

  (2) I have programeed the 1040's physical remote to control my Samsung Blu - Ray player.  The Medai remote access point can now also control it, or is the 1040's remote physical a completely separate device?

  Thank you!

  Hello Apcrews,

  The STRDN1040 was intended to be used with the Sony 'TV Sideview demand' which includes many new features and replace the existing approx. remote media TV Sideview will will allow you to switch between inputs, however there is no visual feedback in the app, so you'll need visibility on the front panel of the receiver or GUI.

  The application will not work to control your player of Samsung BD. The reason is that you have programmed the 1040's physical remote to control the player of comic book via codes IR (infrared), these codes resident in actual distance rather than the receiver and the orders are sent directly from the 1040's remote control.