790 with dual Radeon HD 6350 - any benefit to using both on a monitor?

Similar Questions

• Hi, ive got a m8 htc on 3 network, now im not very familiar with ffox but my phone would benefit from using it

  But not 100% sure advantages and disadvantages that I use Google.

  Thanks Phil

  Hi phil, why not give it a try? Sage firefox plug will work just fine on your phone...
  on the advantages and disadvantages and benefits, I think it will come down to personal preference in the end. This article gives you a quick overview of the most important elements of firefox for android: get started with Firefox for Android

  If you use firefox on the desktop as well, the synchronization feature could come in handy to share your bookmarks, tabs and passwords between devices...

• Where to put M.2 SSD drives in P900 Workstation with Dual processor

  So I have a P900 with dual Xeon E5 - 2643 v3 CPU. I have two m.2 SSD pluged in a flex connector. I was wondering if there is any advantage or increase performance by dividing the two SSD between processors, i.e. to put each training into its own flex connector and pluggin then those in the respective location of each processor.

  Thank you

  Bench1

  No, you should not see a significant change in the UC records Division. The FLEX connector is a custom x 8 PCIe 3.0 slot and therefore supports about 7880 MB/s to the entire map of FLEX. It's about 3940 MB/s bandwidth of each SSD m2 on the adapter.

  Until your SSD meet or exceed the 4 Gbps by SSD, it is not a value of split.

• The screen flickers when playing game. With XFX Radeon HD 4670 1 GB _ Windows7

  I have Windows 7 64 bit with XFX Radeon HD 4670 1 GB SDDR3 card, my current resolution is 1920 x 1080 with 60 htz, whenever I have to play the game and use a lower resolution for the game then my graphic resolution, the screen flickers (it sparkles in any resolution), it goes black and back. and when I leave the game that I find my real resolution changed the resolution which has been put into play.

  My Windows is updated, and I have the latest version of the driver installed on the system from ATI.

  It is very annoying. Any help is appreciated.

  Narayan

  It seems that the problem was with card... maybe it was not set up correctly, wat I did was I removed the card and I cleaned the card with gum and put it back again once... its fantastic work right now... Thank you all for you answers. Narayan

• Problem with dual monitors since upgrade to W7

  I am under W7 Enterprise32 bit with dual display (monitors) - a Lenovo L193pC (primary) and a Dell E177FP (secondary).

  Since the upgrade to W7, I noticed that if I leave my PC unattended and locked for a long time (30 minutes and more), when I get back to him, I lost contact with my main screen: the monitor is on, but the screen is black.  I can only see the secondary display and windows cannot be moved from the second screen to the primary.  All I can do is to sign using the secondary screen, near everything I opened down and restart the PC.

  I use a set of chips Intel G41 Express and a Microsft v6.1.7600.16385 driver for the primary monitor.

  I noticed a few people reporting flickering monitors in a similar situation, but not quite the same thing as what I mean...

  Anyone got any ideas how I can stop what is happening?  Is - this driver related?

  Just to let you know that I solved this now.

  It wasn't a driver issue, it was a computer setting.

  When I put the PC display never sleep and the computer to sleep never it solved the problem.

• Discs CD - R burned with the Finder in Yosemite are unreadable by other players of CD despite the burned music files individual, .aif format. When it is burned with iTunes, all right. Any ideas?

  Discs CD - R burned with the Finder in Yosemite are unreadable by other players of CD despite the burned music files individual, .aif format. When it is burned with iTunes, all right. Any ideas?

  A CD to use in an Audio CD drive must be formatted as an Audio CD.

  Finder cannot create an audio CD, instead, it creates a data CD.

  Therefore, use iTunes to create create an Audio CD.

• problems with ati radeon x 600 in dc7600

  Hi-
  Newbie here... I just installed a X 600/256 MB card pcie ATI Radeon in the HP dc7600 SFF and getting white 4-5 screen when starting with Windows XP.

  She also stopped twice in the past two weeks as the card has been installed. No problem with integrated graphics.

  My question is: I have loaded which, in my view, are the correct drivers from this site and the AMD/ATI site. Could someone please tell me / link me to drivers. Some do not list even the X 600 just X 550 / X 1050. No use gamming or heavy on this machine. ¿¿Would I better too just stick with the integrated graphics card?

  Thank you

  cpu201 wrote:
  

  Hi-
  Newbie here... I just installed a X 600/256 MB card pcie ATI Radeon in the HP dc7600 SFF and getting white 4-5 screen when starting with Windows XP.

  She also stopped twice in the past two weeks as the card has been installed. No problem with integrated graphics.

  My question is: I have loaded which, in my view, are the correct drivers from this site and the AMD/ATI site. Could someone please tell me / link me to drivers. Some do not list even the X 600 just X 550 / X 1050. No use gamming or heavy on this machine. ¿¿Would I better too just stick with the integrated graphics card?

  Thank you

  Hello

  I suggest to remove the card, reinstall the drivers for the integrated graphics card and using the onboard graphics for a week as a test.

  If the white screen start and stops disappear then you have found the culprit.

  If you do not need higher resolution graphics, you are definitely better with the embedded video solution. I suggest using the original drivers.

  What dc7600 do you have? (CMT, SFF, or ultra-Slim form factor are the three versions)

  Best regards

  ERICO

• I buy a new 2015 mac mini with El Capitan.  I currently have a 2013 mac mini with Mountain Lion.  It would benefit me to upgrade my 2013 to El Capitan, before migrating my information to my mac mini to 2015?  Thanks in advance!

  I buy a new 2015 mac mini with El Capitan.  I currently have a 2013 mac mini with Mountain Lion.  It would benefit me to upgrade my 2013 to El Capitan, before migrating my information to my mac mini to 2015?  Thanks in advance!

  Yes, it is better to update the old Mac EC.

  Make sure that you back up the old Mac before the upgrade.

  Note the application of some may require updated to work with CBS. To check see it:

  https://roaringapps.com/apps

  Also, some devices may require updated drivers and for some devices such drivers do not exist.

• How is it that a computer which works very well with a direct Ethernet connection won't work with a switch, however any other computer using the same port, cable, ect, and so on, can?

  Switch issues. Help, please.

  How is it that a computer which works very well with a direct Ethernet connection won't work with a switch, however any other computer using the same port, cable, ect, and so on, can? We already checked the firewall as a question, that it was not, and now, we are puzzled.

  Well, I know that the issue is long-term... believe me, it's a long, but as they say, the devil is in the details. Anywho, the question is, my grandfather has a HP laptop, which for two years has been able to run through a Linksys switch to his router and connect its printers to his laptop. About two months ago it suddenly doesn't work like that. Now, it works fine if it plugs directly into the router/Ethernet. My uncle suggested that the switch was bad, but after testing the same port, cable and all, the switch worked well for him. ' GRAMPS really needs this answered, but someone else, it is called can not understand and now I, in turn, ask you all for what you can offer. Here are the ideas that we have already discredited.

  -Switch bad: as above, is that this particular laptop, even under identical conditions, the works of my uncle very well.
  -Bad NIC: debunked through the fact we connected to the computer directly to the router and it worked fine.
  -Bad configuration of the firewall: we have disabled the firewall (please do not notice, he wasn't the smartest idea, we already know) and even if she recorded the switch exists, the internet is always triggered when you are connected with the switch.

  Thanks in advance for any assistance that you can provide and Merry Christmas to you all.

  It would be useful to consult the results of the ipconfig/all command both when it is connected to the switch and when it is connected directly to the router.  In addition, what is the model of the switch?

  To save the manual copy and the new hits of the ipconfig/all command output-

  First connect through switch.
  Open a command prompt window (start > run > cmd > OK)
  Type the following lines in the black command prompt window and press ENTER after each line

  echo "Connected via the button" > "% UserProfile%\Desktop\ipinfo.txt".
  ipconfig/all > "% UserProfile%\Desktop\ipinfo.txt".

  Now connect directly to the router, type the following lines in the command prompt window and press ENTER after each line

  echo "Connected to the router" > "% UserProfile%\Desktop\ipinfo.txt".
  ipconfig/all > "% UserProfile%\Desktop\ipinfo.txt".
  Notepad '% UserProfile%\Desktop\ipinfo.txt '.
  output

  Copy the contents of the Notepad window in your response (if you use the laptop when it is connected directly to the router) or close the Notepad window, and then copy ipinfo.txt of the laptop to the Gramps in a USB FlashDrive you can connect to any computer allows you to answer.

  You can delete ipinfo.txt on the desktop when you are finished.

• When shutting down my computer, Windows tries to close with force "Mediacontextnotificationwindow"... any idea on what it is and how to solve this problem?

  Original title: closed to stop forced mediacontextnotificationwindow

  I'm having a problem with a 'program'... ? When shutting down my computer, Windows tries to close with force "Mediacontextnotificationwindow"... any idea on what it is and how to solve this problem?

  Hello

  1. have you made changes on the computer before this problem?
  2. What is the exact message?

  Perform the clean boot may help you resolve this problem.

  From your computer by using a minimal set of drivers and startup programs so that you can determine if a background program is interfering with your game or program. This type of boot is known as a "clean boot".

  Reference:
  How to configure Windows XP to start in a "clean boot" State
  http://support.Microsoft.com/kb/310353

  When you are finished troubleshooting, follow these steps to reset the computer to start as usual:
  a. click Startand then click run.
  b. type msconfigand click OK.

  The System Configuration Utility dialog box appears.

  c. click on the general tab, click Normal Startup - load all device drivers and services and then click OK.
  d. When you are prompted, click on restart to restart the computer.

• HP m6-1002tx with AMD Radeon 7670 m flashing the message «Not installed driver AMD» getting started

  HP Pavilion m6-1002tx with AMD Radeon 7670 m(2B) Graphics flashing the message at startup of the system "not installed for driver AMD.

  Catalyst Control also does not work

  I tried to install the driver again but to no avail

  What happens after I updated my driver via HP Support Assistant

  Help, please

  Hello

  See if the following procedure helps you.

  First, download the latest installer AMD on the following link and save it in your downloads folder.

  http://ftp.HP.com/pub/SoftPaq/sp56501-57000/sp56948.exe

  Then, open windows control panel, open programs and features, right-click on the 'AMD Catalyst Install Manager' entry and select the change option.

  Now, follow the procedure to uninstall the drivers and all the software from AMD.  At the end of this process, you will also get a prompt asking you if you want to remove the Catalyst Install Manager - select the option to remove it and when finished, restart the laptop.

  When windows has reloaded, open your download folder, right click on the installer AMD and select "Run as Administrator" to launch the installation.

  Once again, when this has completed, restart the laptop.

  Kind regards

  DP - K

• No sound on a HP DC7900 with graphics Radeon 6450

  Hello
  I have a HP DC7900 SFF with WIN 7 64 and all drivers are available on HP web page
  It also has a RADEON 6450 with HDMI output, actually I use DVI as the monitor has no speakers
  I'm going crazy to the audio input jack to work with a speakers ' bureau

  -Audio drivers HP do not install as they say that they are not for my system.
  -I see just like the ATI HDMI audio devices.
  -In the device drivers it seems there is something missing. I have install chipset drivers and a few others.
  -If I click on the small speaker in the win7 taskbar, systems said, trying to fix... and then nothing happened
  -J' tried to install realtek drivers in general and SRS Premium Sound Technology (I looked somewhere that it was the original system), thereby a new device appears, but it cannot be activated.

  I don't know what else I can try. The speakers are connected to the green plug...

  Thanks for your help

  Hello

  It was settled in another thread.

  The onboard sound has been disabled in the bios. So I had to enable it and worked

  Thank you

• SX20 with dual - can output duplicate / clone

  Hello

  I have a SX20 with dual display running s/w version TC7.3.3.

  Two monitors are connected and I put the configuration as below

  Setup > video > monitors = double

  I get the far - end and discovered on the first monitor and the second will be content presentation

  On change

  Setup > video > monitors = Single

  I get everything - Far end, near end and the presentation on the same screen

  and then the changes below

  Setup > video > SelfviewDefault modepleinecran > on

  Setup > video > SelfviewDefault OnMonitorRole > second

  Setup > video > output > HDMI 1 > MonitorRole = 1

  Setup > video > output > HDMI 2 > MonitorRole = 1

  But the situation is still the same

  Please help me to find a solution, I need to clone screens.

  Concerning

  Boily

  Well, I think I understand what you want now.

  If the monitors are the unique value you will see end, selfview and presentation all shared on the same screen.  However, if the monitors are set to dual, you see end on a screen with selfview and presentation on another.  There is now way to just see the far - end on both screens without possibility of selfview or presentation, screen share or taking a whole screen for itself, if one is active.

• Problem with dual boot

  Recently installed Ubuntu 12.04 on my desk and its poster option for 'Windows 7 (loader)' bootloader, but by selecting, the screen turns white and back to the same screen...

  I guess, I made changes to settings where in fact the Windows 7 operating system.
  Even tried to fix the beginning of the problems using Windows 7 installation DVD, but it shows that it has no problem starting

  And even the charger Linux said that there is no problem

  Help, please.
  Thank you :-)

  I would try using the bootsec tool
  http://support.Microsoft.com/kb/927392#

  using the /scanOS switch that he must analyze the master boot record disks and fix all the invalid entries, you said can kill ubuntu when windows re-written the boot record.
  to work around these sorts of errors with Dual Boot ubuntu in the past I have installed ubuntu to a sick card 32 GB SD or USB then to start, I just hit my boot option and choose the SD/USB instead of my hard drive. (I think that this can be with the Universal USB Linux installer..)
  This way Ubuntu and Windows never have to fight for space MBR as it is completely controlled by the BIOS to start select. Or if you are using a desktop computer, get a 2nd drive internal, disconnect your windows drive, install ubuntu on the other drive, then connect your windows you save. This way you can make the same boot select tip and 2 OS are on completely separate disks and will not conflict. (Also makes it much easier if you need to re - install one of the 2 operating systems)
  I hope this helps and good luck

• Screen resolutions possible for external monitors connected to a T60 with ATI Radeon X 1300

  Hello

  at home, I have my Thinkpad T60 with ATI Radeon X 1300 graphics running in a docking station with an external monitor connected to the DVI. I plan to buy a new screen and I wonder who will take care of screen resolutions of my system. My favorite among the possible new monitors have a native resolution of 1680 x 1050 pixels. The ATI chipset will support this setting?

  A big thank you to anyone who displays some tips

  Georg

  It supports dvi up to 1920 x 1200 resolution.