8024a 000 error will not answer suggested fix

Similar Questions

• Cannot download updates vista, #8024A 000 error pop up and unable to continue.

  tnt1inc

  Cannot download updates vista, #8024A 000 error pop up and unable to continue.

  Hello

  Looks like the files in the folder "Software Distribution" are damaged, try to rename the folder.

  step 1: open the 'Services '.
  > Click Start > type "Services.msc" > hit ENTER > search for "Windows Update" service > right-click on it and click on 'Stop' (if it is not already stopped).

  Step 2: rename the Catroot2 folder.
  > Open computer > folder "C:\windows" goto > search for "Software Distribution" folder > right click on it and click "Rename" (add ".old" to the end)

  Step 3: restart the "Windows Update" Service.

  Step 4: restart the computer.

  Step 5: check the Windows updates.

  Let me know if it worked. :-)

• HP psc1350 all-in-one: check printer cartridge error will not clear

  In the middle of printing of the check print cartridge light error came.  The cartridges are faily new and there has been no discoloration.  I tried to remove and reinsert the cartridges, disconnect the printer from the computer, disconnect the printer, press Cancel.  Error will not clear

  Hey @dennisc10,

  Welcome to the Forums of HP Support!

  I understand that you have some problems with an error light on your PSC 1350 all-in-one printer. I can help you with that.

  To start, make sure that the printer is plugged directly into a wall outlet, not a surge protector. Once done, this document explains How to solve the blinking lights on the printer.

  If after following the above you still can not clear the error, the printer needs to be replaced. You can contact the HP Support by clicking on this link and fill out the form below to discuss the options based on your warranty.

  Please let me know the results after following the above. If you are able to solve the problem or reach some resolution, click on accept solution. If you appreciate my help, please click on the thumbs up icon. The two icons are below this post.

• SPA-3102 PSTN idle status, will not answer but watch sounds.

  Greetings,

  I am a complete newbie in the world of voip. I have an spa3102 and a computer virtual trixbox. When I use my softphone to compose, it makes to the spa3102 (shows the id of the last and gives a status of the appellant voip 'reply') but I get an "all circuits are busy now" and does not change the status of IDLE pstn. It also will not answer the phone for incoming calls to the PSTN.

  Outgoing stuff could be a problem of numbering plan (don't know not just guessing) here it is:

  (S0:xx. <@gw0>)

  I tried the regular (or default) (xx).

  incoming calls are supposed to go to a handset on my desk, for example ext 101 is the dial plan: (S0:101@internalip)

  I can't see the forest for the trees. Can someone give me some advice on where to look. I'm completely puzzled by something non-response externally, and why I get a all circuits are busy if there are inactive on the status page.

  an interesting note: If line1 is connected to an analog phone, it will dial a number, but always shows failover for a reason any...

  Thank you very much!!!

  Greetings!

  Thanks for the reply. I do not know if I explained properly (sounds like I don't have). I have a trixbox and I use the SPA in interface with my RTC and I want to have a fax machine (but later) on the FXS port. The problem I have is that I could not field calls to the collection. They would just ring and ring. I thought it was a dial plan (and hope it was not a hardware problem), but he just wouldn't answer the phone. He would show 'Ringing' like the PSTN status, but Voip would be "IDLE". I've been pouring through the guide of the administrator, forum messages for about 2 weeks now.

  But I didn't know what the problem was. The spa3102 is waiting until she can establish a connection (with the internal phone system) until it meets the PSTN. This is why it continues to ring. The problem why it shows it is inactive and (even with enabled full logging to a syslog box) no traffic to SIP the trixbox internal... because I had the port internal plugged in... not the WAN port (or internet). Thats right... silly me...

  I gave the wan port an address on the same subnet and moved the cable to it, once I could talk to her I change address internal to something even not on my network (if no routing problem) and left the network adapter disconnected (internal nic). Then I changed the wan to the old internal address address (trix trunk was already configured in this ip address anyway...) and PRESTO! I tried calling the number RTC and started to receive log entries showing the sip signaling and he's trying to route the call to the box of trix. It works now! So he was not answering the phone in my case, because it could not connect to the pbx or the ip phone and that because I don't use the WAN/INTERNET port on my SPA. Something I don't remember seeing in the textbooks as a "hafto' or a 'must '... I might have forgotten that of course, but I don't remember seeing him there.

  So if you enable logging, and then call this number (I used the PuTTY and 'tail-f /var/log/spa3102.log"to see the entries that they light up the box of syslog) and you don't see any sip traffic, it could be that you must use the WAN/INTERNET port instead of the internal port apparently logical... BE sure THAT ENABLE YOU REMOTE ADMIN if you decide to give it a shot.

  Also you can do the spa to answer the phone, even if it has no where to send the call (or if you want incoming people to use a PIN) on the GATEWAY PSTN - VOIP, there is a setting "off hook during the VOIP call" (default = no), but change that Yes - he would answer... and then sit there... If I had a PIN with a dial plan that is associated with this would give a fast busy after the entry of the PIN. BUT now everything is cool!

  Thank you!

• MacBook Pro Panic error - will not start

  I'm getting the following at the start. Have no idea what it is or what to do. Appreciate any advice.  Backup the latest TM is dec 10. But can't even get the stages of recovery to work.  Tests of material D on OK.

  

  If you're in Snow Leopard as your profile is displayed, follow these steps:

  Reinstall OS X without erasing the drive

  1 fix the hard disk and permissions

  Boot from your Snow Leopard installation disc. After the installer loads, choose your language and click on the button continue. When the menu bar appears select utility drive in the Utilities menu. After that the charges of THE select your entry from hard drive (mfgr. ID and car size) in the list on the left.  In the status area, you will see an entry for the S.M.A.R.T. status of the hard drive.  If it does not say "Verified" then the hard drive is faulty or has failed. (State SMART is not reported on external drives Firewire or USB). If the drive is "verified", then select your OS X volume in the list on the left (subentries under the entry for the road), click the first aid tab, then click the repair disk button. If THE reports any errors that have been corrected, and then run repair disk again until no errors are reported. If no errors are reported, click repair permissions . Wait until the operation is complete, then exit FROM and return to the installer.

  If THE reports errors, it cannot be resolved, then you will need Disk Warrior and/or Tech Tool Pro to repair the drive. If you do not have one of them or none of them can fix the disc, then you will need to reformat the hard drive and reinstall the OS X.

  2 reinstall Snow Leopard

  If the disc is OK then leave FROM and return to the installer.  Proceed to reinstall OS X.  Note that the Snow Leopard installer will not erase your drive or disturb your files.  After installing a new copy of Mac OS X, the installer will move your Home folder, third-party applications, elements of support and network preferences in the newly installed system.

  Download and install Mac OS X 10.6.8 v1.1 updated Combo.

  If the above does not work, then follow these steps:

  Clean Install of Snow Leopard

  Make sure that you have backed up your files because the following procedure will remove all of the hard drive.

  1. start the computer using the Snow Leopard installation disc or disc 1 that came

  with your computer.  Insert the disc into the optical drive and restart the computer.

  After the ring, press and hold the C"" key.  Release the button when you see

  a small gear appear under the dark gray Apple logo.

  2. once the load setup program select your language and click continue

  button. When the menu bar appears select utility drive in the Utilities menu.

  After charge OF select hard drive entry in the list on the left (mfgr. ID and drive

  size.)  Click the Partition tab in the main window of THE.  Set the number of

  partitions to one (1) from the Partitions of the dropdown menu, click on the Options button

  GUID, click OK, and then select define the Mac OS Extended format type

  (Logged, if supported), and then click the apply button.

  3. when formatting is complete FROM and return to the installer.  Move forward

  with the installation of OS X and follow the instructions included with the installer.

  4. Once installation is complete your computer will restart in the Setup

  Assistant. After finishing Setup Wizard will complete the installation, after which

  you will use a new installation of Mac OS X.  You can now begin the process of updating

  at the opening of updated software and installing all recommend updates to bring your

  current installation.

  5. If you plan to sell or to give to your remote computer, then proceed as follows:

  Once you reformat your hard disk and reinstall OS X, the computer restarts with a

  Screen of welcome and you prompt to choose a country or region. If you want to leave

  the Mac in an out-of-box state, do not continue with the configuration of your system. Instead,.

  Press command-Q to stop the Mac. When the new owner turns on the Mac,

  the Setup Wizard will guide them through the configuration process.

  Download and install Mac OS X 10.6.8 v1.1 updated Combo.

• Cannot open links in Skype, WLM or saved HTML (Firefox will not answer)

  "I can't open links in conversation Windows Skype in a Firefox session running in the background, it flashes only the window borders. If I close Firefox and click on the Firefox links automatically open the link, but not everything with a session running in the background. Strange thing while having clicked on the link and began a new session of Firefox, it opens the legs as usual while clicking on the following links several times but close Firefox and restart and then click on the links in the Skype window, it does not. I have to bring up the context menu, then choose Copy address. »

  I see there is no answer to the problem that guy had and I have the same problem - links of Skype and Windows live mail will not open and there is more - FF does not open the html files that are saved on the pc, even you, I just saved 'em, but when I click on em nothing happens and when I right click and choose open with FF nothing happening.

  He worked for two weeks without problem and suddenly today links just do Skype flash exactly as in christianhbergs description and in windows live mail, they become purple but firefox does not react.

  as soon as I make IE as my default - links work, but not with firefox.

  So I guess that the problem is in firefox (no Skype or WLM in Win8)

  (running Win8 and FF25.0)

  And none of the solutions that you have given us in the work of https://support.mozilla.org/en-US/questions/961242#answer-497345 .

  I found the problem you!

  I don't usually turn off the pc, but I Hibernate it!

  While I had this problem, I decided to restart my pc.

  The problem disappeared after a reboot - so I suppose the FF problem was somehow linked with use of the memory to the hibernation.

  Thank you for your answers
  anyway.

• Satellite L300-1AS - error PXE - boot error - will not boot from USB

  Startup error - error PXE-L300 1AS - will not boot from USB

  I recently bought a new HD to replace the original that my laptop takes an hour to load.

  I put the new drive hard at in the BIOS setting, I chose to boot from USB... USB is recognized as it appears on the screen of the BIOS. I disabled the LAN option as it gives me PXE error... I think that the USB files are not read. as I handed the old HD and attached to boot from USB but it just goes to the start screen.

  I thought that perhaps I bought the wrong HD, but a new appeared on the BIOS setting... I'm a bit confused and would appreciate it if someone could point me in the right direction...

  Any help or advice will be appreciated.

  Thanks in advance.
  Abul

  New HARD drive has nothing to do with it. Problem must be your USB key.
  In your ad you didn t wrote what is on it, and we don t know if USB can operate as boot device or not.

  I put t know what OS you want to install right now but original recovery DVDs or use Microsoft installation disc and install Win7 32 bit. I ve installed on friends L300 and it works perfectly.

• Will not answer application blackBerry Smartphones, phone will not do anything

  My bb-9330 has 'a + chat for face book' installed and it is stuck on the screen where the application requests access to gps information, but will not let me answer.

  I got it but thanks for trying. This time when it restarts, I immediately scrolled to the answer that I wanted before it locked up. Thank you

• C6350 error on the screen paper jam, no paper in the machine, not pc connected, error will not clear

  printer photosmart c6350, indication of paper jam that will not delete, no paper in path, no computer involved. cleaned the sensor optics paperpath, verified actuation switch Mech... Does anyone have any ideas or suggestions? Thanks, Larryt

  Hello

  I see... so if the cart wud nmot move to the Center or to the right of the printer - try to unplug the printer and manually move the carriage... but if this step does not work... you need to replace the printer becayse the unit is already defective...

• "s" key will not answer

  "" A week ago I started having some i s Edition with my "s" keys on my laptop (hp pavilion dv5) keyboard. It stop working for a few minutes, but after that I removed the key and cleaned under it, she started responding again.

  Now, the key stopped working altogether (I was able to type teas's in this mesh in. by copy - paste).

  I have not spilled something on the keyboard and this i s the only key that is not appropriate.

  The key will not work on the keyboard on the screen.

  I don't know if this I s a pilot is known or if it is simply a problem with the keyboard itself.

  Any help would be appreciated. Thank s.

  Try an external keyboard.  If the "s" key works on it, then it is almost certainly of a mechanical problem with the internal keyboard.

  "airekuh" wrote in the new message: * e-mail address is removed from the privacy... *

  "" A week ago I started having some i s Edition with my "s" keys on my laptop (hp pavilion dv5) keyboard. It stop working for a few minutes, but after that I removed the key and cleaned under it, she started responding again.

  Now, the key stopped working altogether (I was able to type teas's in this mesh in. by copy - paste).

  I have not spilled something on the keyboard and this i s the only key that is not appropriate.

  The key will not work on the keyboard on the screen.

  I don't know if this I s a pilot is known or if it is simply a problem with the keyboard itself.

  Any help would be appreciated. Thank s.

• Touchscreen Officejet Pro 8500 A910g a will not answer and the test page does not print during installation

  During the setupl touch screen lights up with the screen language and network led on.  Test page does not print.  Touch screen will not respond.  Printer purchased on 20 Oct.

  Hi paulw17291,

  Power remove power at the back of the printer cable. Wait about 1-2 minutes before plugging it back in. Let me know if that solves the problem you are experiencing.

• Satellite Pro A100: DVD UJ850 of disk I/O error - will not read disks

  I got a glance at other posts on the site of the people who have had a similar problem and I'm starting to think that my drive is defekt!

  The defective hard drives after extracting audio from a CD to store on my MP3 player. I arrived at almost the end of the CD and the drive started to jump so I took out the cd.
  After that, he would not read the discs and returned the device IO error that others have had.

  First thing I did was install the driver and cleaned the lens. No luck. Then I removed the device in Device Manager and reinstalled windows, still no luck. Then I tried the registery fix. I even removed the drive and put it back in, my same experience if this can sometimes fix things. Still no joy.
  As a last resort, I tried to find the firmware for the drive a Matsu * UJ850, but could ony find another OEM manufacturing of the firmware.

  Firmware is for the toshiba Variant? I have really no idea why he left after the extraction of a CD. He had a very light use and is more than 1 year. If there is a way to repair rather than shell out on a new, one I would welcome suggestions.

  I saw you first posted thread here in the forum on the problems of drive CD/DVD device.
  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=20784
  You solve it? It of the same problem?

  The problem described here sounds a bit like a hardware malfunction. Especially the drive cannot read or write CD or DVD due to the lens of the drive failure.
  But maybe you are a lucky guy and the material is ok

  I noticed that the Sonic software could be responsible or IO errors.
  Remove the software Sonic add it & remove programs, reboot the laptop and clean the registry with CCleaner software recheck player features.

• Re: Satellite A40 - hard drive error - will not start

  My friend bought this laptop in April 2007 and has been very happy with it until about a month when he stopped startup in windows xp.

  At the start, she now gets the message

  "PXE - E61 media test failure - check the cable for.
  "PXE - M0F outgoing intel boot agent"
  "Insert system disk in drive."
  "Press a key when you are ready.

  and then the laptop does not start in windows.

  I thought that the hard drive can have detached, so I took it out and he handed in a State, but in vain.

  I also tried to reinstall with the recovery CD but get the following error message
  status «»
  GDISK (E) no such fixed disk 1 "

  It is followed by * ERROR *.
  Error number 11030
  invalid message destination drive
  X;

  I ran a Toshiba (or he could have Hitachi) utility disk that I burned on a cd and went up on the audit boot.

  It said there are problems on Toshiba MK4025GAS, which is the hard drive. details coincide with what it actually says on the disc.

  The BIOS sees the drive start on as he is listed as the master, with the cd as the secondary drive.
  Therefore, is it true that the drive is broken. If so - can it be repaired or is there another solution.

  I tried Googling the error message and there are conflicting messages on this issue, so your help would be very appreciated.
  It seems crazy that the reader can break after only 18 months - was there a defective batch?

  If that's the case Toshiba offers a replacement or it will cost a lot?

  Thank you

  Nashy

  Post edited by: Nashy - sorry - it was bought in 2007 is NOT 2006

  In your case, the HARD drive is certainly defective and you need to replace. Satellite A40 is pretty old laptop without guarantee valid and there is no replacement from Toshiba.

  Just buy a new HARD drive. Hard drives for this good old classic are not more expensive.

• The 1068__I spooler error do not know how fix this problem can anyone help?

  I get the spooler error 1068, I said buying registrybooster2010 but which costs £20.00 and nothing helped!  I need to get this sorted ASAP, can anyone help please

  Hello

  Registry Booster and similar programs are all hype and snake oil, they can fix practically anything and
  often the cause of big problems on their own. Request your refund.

  Check chan seen message here - one of the highest.

  fixed spooler subsystem app stopped working
  http://social.technet.Microsoft.com/forums/en/itprovistaprinting/thread/460f297a-dd66-4476-A176-542e1519ca3e

  ===================================

  If the above didn't help:

  Use this method to clear the spooler and then uninstall and reinstall your printer (check with the manufacturer for)
  the latest driver).

  Check Mr. Fixits here and if you use the other methods go back and try again later.

  Problems of print and error - a Mr Fixit of printing
  http://support.Microsoft.com/GP/printing_problems

  Solve printer problems - a Mr Fixit
  http://windowshelp.Microsoft.com/Windows/en-us/help/8c11977e-8244-408f-A036-7978a618d7a21033.mspx

  ------------------------------------------------------
  Logon as administrator

  Start - type in the search box-> COMMAND - control to the top of the list and RIGHT CLICK – RUN AS ADMIN

  You can copy and paste each line except those brackets and press ENTER after each.

  net stop Spooler

  (echo suppression of all print jobs)<-- you="" should="" see="" this="">

  ping localhost n 4 > zero

  del/q %SystemRoot%\system32\spool\printers\*.*

  net start Spooler

  (sound Done!)<-- you="" should="" see="" this="">

  ping localhost n 4 > zero

  Another way
  http://4sysops.com/archives/how-to-cancel-a-print-job-that-hangs-under-Windows-Vista-and-XP/

  Check the print - DELETE/STOP queue all jobs - then right click on the printer - REMOVAL
  http://windowshelp.Microsoft.com/Windows/en-us/help/bb6f81d9-4092-4ac8-9716-2bd008f513e11033.mspx

  If you use Control Panel - Classic - printers

  Try after unplugging your printer if necessary.
  -------------------------------------------------------------

  Also check the spooler print and its dependencies and addictions Service.

  Print Spooler service
  http://www.blackviper.com/WinVista/services/Print_Spooler.htm

  How difficulty Windows Vista print spooler starts do not
  http://www.ehow.com/how_4920100_vista-print-spooler-not-starting.html

  ------------------------------------------------------------

  Check this thread if necessary - to stop and erase the spooler

  http://social.answers.Microsoft.com/forums/en-us/vistaperformance/thread/a15779d6-ac0d-42FD-9Ac2-a1da241ea19f/

  and here
  http://social.answers.Microsoft.com/forums/en-us/vistahardware/thread/58b54fa9-cf6f-40F7-90b2-8093c6777493

  ------------------------------------------------------
  Clean the General corruption and repair or replace the damaged/missing files.

  Run DiskCleanup - start - all programs - Accessories - System Tools - Disk Cleanup

  Start - type this in the search box-> find COMMAND at the top and RIGHT CLICK – RUN AS ADMIN

  Enter this at the command prompt - sfc/scannow

  How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
  generates in Windows Vista cbs.log
  http://support.Microsoft.com/kb/928228

  CheckDisk (chkdsk) runs at startup.

  How to run the check disk at startup in Vista
  http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html

  I hope this helps.

  Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

• Im trying to reinstall webroot and im grtting error 1638 and TI 1603 error will not completely installed?

  weboot was not work corectly webroot had me unistall thin when itried to reinstall webroot I got error massage 1638, now after trying several times I'm getting error 1603? I can down load in safe mode, but it is not wooking wright in normal startup upward? It's like it keep serching for the program

  It comes with Vista, upgrade install and activate Forum.

  http://social.answers.Microsoft.com/forums/en-us/vistaprograms/threads

  They will help you with your question in Forum Vista programs at the above address.

  See you soon.

  Mick Murphy - Microsoft partner