8500 a909n scan & print of Readiris Pro 11 and Acrobat 10.1.3 is distorted

Similar Questions

• OfficeJet 8500 A909n scanned of the impressions of image reduced to 0.25 "

  I did a complete new installation of new drivers for intsaller version 14.0. Scan solution Center (8.5x11.0"using the bucket, original in the upper right corner) looked precise and saved as a picture. PDF file.  I then printed with Adobe Reader and Readiris Pro 11 and they both printed the reduced image "1/8 on all sides (sometimes 0.25" up and down) - I could now see the page border line that wasn't in the picture displayed by the Solution Center scan (I have crops 8.5x14 in 8.5 x 11).

  How can I get an exact copy as what I get when I use the 8500 as a manual Copier?

  Shane_R HP provided the following information:

  It is not a question or a problem with the duplexer.  It's just how it works.  The duplexer reformatted the verso of a print out differently than it does the front.  Inkjet printers, it leaves space so that the ink will not smear.  Laser printers, it leaves space to avoid the toner smears.  It's just the way is designed the duplex function.

• Is someone can you please tell me what the "ESD" means to Acrobat Pro Win ESD XI? What is the difference between 'Acrobat Pro XI' and "Acrobat XI Pro Win ESD"?

  Is someone can you please tell me what the "ESD" means to Acrobat Pro Win ESD XI? What is the difference between 'Acrobat Pro XI' and "Acrobat XI Pro Win ESD"?

  Hi pattiparrish,

  ESD stands for electronic Software Distribution. Acrobat XI provided compact disc of thought which included installation CD, on the other hand it was also provided by ESD, which included the direct download for Acrobat link XI products download Adobe Acrobat | Standard, Pro | DC, XI, X.

  There is no difference in the application, the difference, it's just that how it is provided to the customer.

  Kind regards
  Nicos

• Jet office pro 8500 does not print Yellow - no error messages and printhead life shows good

  I have an Officejet Pro 8500 A909n Prime that doesn't print Yellow. I have replaced the yellow cartridge twice, cleaned the printheads as well regular and deep cleaning, and I cleaned the contacts on the print head. Current information shows the printhead as good quality. The amount of ink is correct. There has never been no error messages whatsoever. What gives?

  {The content removed}

  Sorry, but none of your suggestions helped. What I suspected at the outset was the printhead and it seems to be what needs to be replaced. HP and print heads are a big problem and I had this problem on previous models of the officejet family. My Canon has been in service for seven or eight years and I have never had a problem with it. I think that if I replace this printer that I might have to consider anything other than HP. Thanks a lot for your help.

• HP 8610 Pro: why don't still no button "Cancel printing" fast for the printer HP 8610 Pro? And issue of the queue.

  This printer prints so fast that he NEEDS an option button fast cancel to cancel a print job.  A quick solutions?

  Also, sometimes when printing from a web application, the printer displays a "printing spool" minutes before it actually prints.  Can it be sped up or cancelled?  Still, the X on the LCD screen does not seem to work. Any thoughts on these issues?

  @Avalon11,

  If it only happens when you print from the Web, it could be a number of things. Could you run printing HP and doctor Scan?

  You can also check and see if the Web browser that you are using requires some updates or try another browser.

  Any help?

• Why the bounding boxes are different between the XI Acrobat Pro and Acrobat DC?

  Hello

  Firstly apologies if this been asked elsewhere, but so far I have failed to find a solution.

  I have Acrobat Pro XI and Acrobat DC, each on two different PCs using Windows 8. Why the function edit text & Images interprets the same PDF document differently when displaying the bounding boxes. In Pro XI he produced 7 inclusive about 7 decent size paragraphs of text only. In MS bounding boxes are reduced to only 3 each effectively covering most thick of text in the document. To quickly select 3 of 7 bounding boxes to remove them entirely from my PDF seems not to be possible in DC, where I appear instead of having to select large portions of the text instead and delete accordingly.

  I don't see where in preferences maybe you can change the 'sensibility' or 'threshold' to distribute a PDF file in smaller sizes (but more) bounding boxes. Is it possible to make DC behave like a Pro XI?

  Any help would be appreciated.

  Mark

  These boxes are the result of speculation, well enough. The algorithm behind

  He probably changed between versions, so the different results.

  There is nothing you can do about it.

• Network scanning multi-page Officejet Pro 8500 a w/o ADF (Vista and HP Print software)

  Without using the ADF on the 8500 has, can I scan multiple pages in a PDF file if the scans are done from the PC? How?

  My version of Vista is 6.0.6002 Service Pack 2 Build 6002.

  My HP Officejet Pro 8500 has e-all-in-one printer - A910a is the standard model, for example, the premium product of mid-range. It is connected by LAN cable. It scans, prints and can provide the status of ink level.

  The 8500 is connected via the network, and on a Vista PC, I use a desktop icon to launch "HP Officejet Pro 8500 A910.exe". The new software is very different from the [Photosmart c6150 dead] [uninstalled] old HP Solution Center, and I looked in the new textbooks at least briefly, so I hope someone can same thing me some time with a basic question/issues scan. My research forum has failed, but if someone has a link to a relevant thread, that would be appreciated.

  Without using the ADF on the 8500 has, can I scan multiple pages in a PDF file if the scans are done from the PC? How?

  I also tried scanning browser based and there is a drop down for sweeping on both sides, but the drop down menu is not activated and cannot be used.

  I only went through the configuration of the network folder, which may be necessary to get the ability I want. On this subject, I wonder if I set up a folder for all users, or just for my login.

  Thanks for any help!

  Success?

  Well, I created a folder network and was then able to scan to a PDF file of several page without using the ADF (ADF) documents.  To do this, (1) install the software provided with the Officeject Pro 8500 has, (2) the installation program a network folderand (3) run the scan of the touch screen located on the Officejet Pro 8500 has.

  (1) install the software supplied on CD (or probably downloaded from somewhere near here). You may be able to work with only the web browser interface, but I wasn't before install the software provided on the CD, and I suspect that some software is required on the PC.

  Install the downloaded software or the software provided on the CD-ROM titled

  HP OFFICEJET PRO 8500

  A910

  (2) Setup a network folder. The installation of the software created a few new icons on my Vista PC.  Double-click the icon of the desktop titled "HP Officejet Pro 8500 A910". On my Vista PC, it runs,

  "C:\Program HP HP Officejet Pro 8500 Officejet Pro 8500 A910.exe A910\Bin\HP"

  An application window should appear. Mine has a title, "HP Officejet Pro 8500 A910 (network).

  The application window has a section of Scanner Applications on the left. From there, the scanner to the network folder Wizard. Which can be done by double clicking on the 'scan to network folder Wizard"or by the first double clicking on"Scanner Actions"and on the screen that appears, click on"Scan to network folder Wizard.  Otherwise, you can get this done through the web browser, if you know the URL for your device's built-in web server. Because I use my DHCP router (to allocate IP addresses in my local network), I currently access the 8500 a of http://192.168.1.19/. From there on, I can access the Scan tab, and I can access the ability to "Setting up the network folder" on the left.

  Using the scan to network folder Wizard, I clicked on New and used the Browse button to select "C:\Users\Gordon\Documents\My Scans" to set up a folder named "Gandalf Gordon". The next page of the wizard, it will take your network password (or local password if he is counting on the local PC) required to access the PC where the path "C:\". "sailed above is located. When I clicked on finish, the wizard opens a web browser which indicated a certificate error. I chose to continue to the site, which turns out to be the web server integrated in the 8500 has. So now you know a URL where your built-in web server on your network if you were already uncertain. If you do this URL a favorite browser, the favorite should work even if the IP address of the 8500 a is changed in the future.

  Display (3) initiated a sweep of the touchscreen located on the Officejet Pro 8500 a. tap the icon "Scan." Tap the 'network '. Select the network folder. Place a page to scan on the glass of the scanner without using the automatic document feeder. Press 'Start Scan '. When the touch screen prompts, "Page another Scan", select 'Yes', place another page on the scanner glass and click, 'Start scan '. When the last page is analyzed, answer 'No' to the prompt "scan another Page.

  Note: When loading pages additional manually, you have to work a little faster or unit will then expire and close the file with as many pages that you managed to scan. I did three pages as a test.

  If there's a better solution out there, please share!

• 8500 HP OFFICE JET PRO 8500 A909n error: B87126D0, unit will not turn off or print

  I'm having the same problem as described by others, "error of 8500 HP B87126D0, unit not turn off or print.

  I followed all the instructions from documeneted on this thread. I also replaced the power Module, in the hope that would solve my problem. I have an OFFICE JET PRO 8500 A909n PRIME

  Not sure why the solution cannot be posted here, as I see many others with this same error and the exact symptoms.

  Whatever it is, I really appreciate a solution 'private' as well.  Really, I love this printer and would rather not have buy another.

  Thanks in advance!

  Hello @rnegron57,

  Welcome to the Forums of HP Support! I see that you have found an error code on your HP Officejet Pro 8500 first, you are unable to power the printer on or off.

  You have completed the recommendations online without success, and you've seen other members of the community receive private messages. I would like you to take a look here: printer resets: What You Should Know

  I went ahead and you sent a private message, please go to your user page to the right of your name, you will see your Inbox.

  I'll watch for your reply, I would like to know the results.

  Thank you for being a part of the community of HP. Please let me know if this helps solve the problem by marking this message as "accept as Solution" . If you need more assistance let me know and I will gladly do whatever I can to help. If you want to say 'Thank you' to my effort to help, click on the "thumbs up" to give me a Kudos.

• HP Officejet Pro 8500 A909n: HP Officejet Pro 8500 A909n - heads will not snap.

  HP Officejet Pro 8500 A909n - heads don't align.

  -replace the heads-get green light in the HP utility on both

  -replace the ink

  -reset printer.

  He's still not the alignment - mires look OK (2 and 3) with the exception of the verticle (focal 1) lines

  second line 3 game are a little out of the middle (vertical)

  Anything else I can try?

  Hey @bgflyer,

  Welcome to the Forums of HP Support!

  I see that you have some problems with the alignment of your Officejet 8500 first all-in-One printer. I can help you with that.

  To start, make sure that the printer is plugged directly into a wall outlet, not a surge protector. Once completed, this document describes How to solve problems of alignment with your printer.

  If after the above, that you can't always line up, the printer must be replaced. You can contact the HP Support by clicking here and filling out the form below to see what options are available.

  Please let me know the results after following the above. If you are unable to resolve your problem, please click on accept solution. If you appreciate my help, please click on the thumbs up icon. The two icons are below this post.

• HP Officejet Pro 8500 A909n

  I have a HP Officejet Pro 8500 A909n I've had for a while.  Recently it from printing in pink even though my settings was to black ink only.  Then he stopped and started printing in black.  Want to know what caused this.

  Also, I wanted to know if in order to print in black so the color cartridges have ink inside.  I read somewhere that the carridges themselves must be in place, but he said not that the color cartridges must have ink inside.  I do not use color and don't want to buy new cartridges of color if I have to.

  Would like to help on these 2 points.  They can even be linked to the problem.

  Thank you.

  Hello @JCooper615!

  Thanks for posting on the HP Forums!

  You mentioned that the printer printed pink when you had selected only black print cartridge.  I'm not exactly sure what caused this, but I can provide a few suggestions that can prevent it from happening again.

  Its possible to print to the printer head needs to be cleaned.  To perform a printhead, cleaning the printer just tap the "setup" on the screen of the printer.  Once your menu setup press "Tools", and then press "clean printhead".  The printer will run the print head cleaning and print a report.

  Another thing that I suggest is to remove the printheads and clean them manually.  Sometimes the ink can fog up on the copper of the print head contacts.  This can cause a bad electrical contact and may result in poor print quality.  For instructions on how to clean the printhead manually, click on: http://support.hp.com/us-en/document/c01609042

  The printer takes 4 cartridges and 2 print heads.  The print heads are making to put ink on the page and they need to be replaced at any time.  If the problem persists, you may need to install a new print head.

  You also want to confirm if the printer needs color cartridges to print.  The printer requires all of the ink must be installed to be able to print.  If a color cartridge is empty, then the printer displays a message that it is unloaded.  The message will not disappear until this new cartridge is installed and will prevent you from printing.  When printing in black the printer still uses a small amount of color.  This is to ensure to don't clog the tubes of ink and the print heads do not dry out a lack of use.

  Some printers cartridges that have integrated print heads.  Some printers as the ENVY 5530 and Officejet 4630 do not require the color cartridge too be installed to be able to print.  They can print mode single cartridge.  So if you exhaust your colors you can just take it off and continue to print in black and white.

  Thanks again for the display on the HP Forums!

  Enjoy your day!

• OfficeJet Pro 8500 A909n Firmware update froze

  I was trying to update my firmware on my HP Officejet Pro 8500 A909n. During installation, the installation froze. I was connected via my USB to the printer. There was a progress screen on the LCD of the printer that shows the numbers 1-5 with small squares under each of the numbers that were either low-light or highlight according to what stage or the status of the update on that. There was also a progress under the numbers bar. The update in the impasse with the square under the number four was highlighted and bar ceased under the number one growth. After 3.5 to 4 hours waiting for the update to complete, I had to kill the process of updating. Try the update again the model search engine can not find my printer and the printer lcd displays a circle with a helping hand to 12:00 and below is a string "B8084644". I'm stuck. Have mercy on my soul... to help

  Sent you a private message.

• OfficeJet Pro 8500 A909a not print correctly

  OfficeJet Pro 8500 A909a

  Windows 7

  I can't print now with my usual USB connection, directly from the computer USB for printer, even if another computer can print to it via a network connection.  After printing, I open printer in devices and printers, there is a ghost copy to the printer and the printer itself is ghost, indicating that it is in offline mode.  After you open the Quebec, the file is listed with a message "error-printing".  I can remove the copy to the printer and to set the printer online, but the process is repeated each time.

  I: restarted the computer and the printer, run the troubleshooter printer with no problems, noted, tried the USB cable to a different port, execute printing and doctor Scan and my computer 'sees' the firmware, printer and resettled drivers and restart the print spooler.  There is no hardware problems - it will print on the other computer and copies, etc very well.  I have not tried another cable because I have a step and assume if my computer can see the printer should work.  One final note: there was a bolt of lightning about 100 yards away for the weekend. first thing Monday back to work is when I noticed the problem.

  Please help, I did research for hours without success...

  Tried the printer with 2 different usb cables to another computer and it never worked.  I think that the usb port on the printer has been fried.  Bought a new printer works fine.

• EMachines EL1333G - 01w Telechareger for printer HP Officejet Pro 8500 cannot book

  I'm not a good player, I have an E machine computer Telechareger is hard wired or wireless. I have a printer HP Officejet Pro 8500 wireless I have the disk for the printer and can not address

  Hi, RichadThompson_720,

  What version of Windows are you using?

  Question: You say that you can't connect the printer?

  The practical guides offered by HP about your printer model

  http://h10025.www1.HP.com/ewfrf/wc/documentSubCategory?tmp_task=useCategory&cc=us&DLC=en&LC=en&product=3752456

  You try to connect to the printer wireless?  To a network?

• HP Officejet Pro 8500 a: printers print only after the new cartridges installed

  Whenever I put in new cartridges I have problems with the print head alignment, then it usually printed.  This time, he was sitting with cartridges empty color for awhile and now it does not print at all.  I always use only the new HP cartridges.  It fails the alignment and the blue and yellow and sometimes the magenta show on the sheet alignment.  What is the print heads?  Why would I need to change them whenever I have to add ink cartridges new which makes no sense.  I have never changed them, but they worked very well until I added the new ink.

  Hey @janh1058,

  Welcome to the Forum from HP Support.  I hope you enjoy your experience here.

  I understand that e-all-in-one-HP Officejet Pro 8500 a your printer is printing is no longer.  I would like to work with you on this. I have a few suggestions that might restore your printing capabilities.

  It could be that the long period of inactivity of dormancy has dried the print head, even if you have made the right choice in leaving the cartridges installed in the printer.  I recommend you try the following basic troubleshooting steps before embarking on a manual print head cleaning more intensive:

  • Click here and clean the printhead automatically via the front panel of the printer, as shown in the second Solution.
  • Repeat three times if you still have print quality issues.
  • Remove and reinsert the cartridges once more with the printer to force the printer to print a different allignment page.
  • This to improve the print quality?

  If you use always the same question, I have a few more advanced troubleshooting tips:

  Check the status of print head warranty

   

• HP Officejet Pro 8500 does not print documents and reports for Quicken 2008

  New computer will not print in Quicken 2008 software.  Tried all the possible solutions. I installed Windows 7.  I downloaded and installed the new software for HP Office Pro 8500 work with Windows 7.  Software program Quicken 2008 order printing accordingly.  All other software programs prints perfectly. Help!  I get no support Quicken's help.

  Message edited by Tiger-Pope on 28/10/2009 15:38

  Tiger-Pope wrote:
  New computer will not print in Quicken 2008 software.  Tried all the possible solutions. I installed Windows 7.  I downloaded and installed the new software for HP Office Pro 8500 work with Windows 7.  Software program Quicken 2008 order printing accordingly.  All other software programs prints perfectly. Help!  I get no support Quicken's help.

  You have the 64 bit version of Windows 7?  This thread suggests printing from Vista 64 bit (and WIn 7 would be similar) is a problem in Quicken 2008 and 2009.  The thread suggests there is a solution, but the link requires registration for the forum of Quicken and who did not work for me this afternoon.