8500 blue

Similar Questions

• OfficeJet Pro 8500: Office Jet Pro 8500 blue print as rose/violet-all ink cartridges are full?

  Something blue prints as a pink/purple color.  Recently replaced the Cyan cartridge.  No other cartridge is the replacement level yet.

  Ideas?

  Hi @KFDLou,

  Please try these steps and getting back to me.

  As indicated in the document "If there are still defects on the page after the print head has been cleaned once, go to solution to replace one or two print heads."

  Solution 6: replace one or two print heads

  If you have done all the troubleshooting steps and you are still experiencing a problem, replace the printhead.

• OfficeJet Pro 8500: No yellow or blue

  Very well yesterday, today problem started with no yellow.  Went through the process to the leaders own and has gotten a little better on the test page.  Heads cleaned again and now no yellow or blue.  Cleaned heads the 3rd time and the same thing - no blue or yellow.  All Original HP print cartridges are new or full.  HP online help does not have.  Any suggestions much appreciated.

  Hey @Rlo346,

  Welcome to the Forums of HP Support!

  I understand that you have some problems with the print quality when printing for the Officejet Pro 8500 all-in-One printer. I can help you with that.

  To start, make sure that the printer is plugged directly into a wall outlet, not a surge protector. Once completed, this document describes How to solve print quality problems with your printer.

  If after the above, that you are unable to print correctly, the printer must be replaced. You can contact the HP Support by clicking on this link and fill out the form below to discuss the options based on your warranty.

  Please let me know the results after following the above. If you are able to improve the quality or to achieve a resolution, please click on accept solution. If you appreciate my help, please click on the thumbs up icon. The two icons are below this post.

• HP Officejet Pro 8500 Wireless print pink instead of blue

  Until recently, I never had a problem with this printer; However (now when I didn't print blue) it comes out pink... I cleaned the head many times and has also replaced the Cyan Ink Cartridge with a new and fresh cartridge, and nothing seems to solve the problem... All suggestions are solicited.

  Hi Chuck,

  I understand that you have a problem with your printer Officejet 8500 Wireless color print does not correctly. I'm sorry to hear what is happening, but I will do my best to help you!

  I understand that you advised you already tried cleaning, but I will suggest that take you a look at this document to print quality because it has a few others not for you to try as well. If the problem persists after this document, although I suggest you clean the printhead contacts manually because it might be an accumulation causing the colors do not print correctly.

  Finally, I also recommend connect the printer directly to a wall outlet to make sure that the printer is getting enough power to function properly.

  Hope this helps, have a nice day!

• OfficeJet pro 8500 wireless w / B8808C14, B8614C64, B8806060, or B8806238 blue screen error message

  HI -.

  My printer HP Officejet printer to wireless Pro 8500 A909g connected via USB, was when our lights flickered. It is connected to a surge protector.  However, he was one of the four error messages on the touch screen when the printer is on.  B8808C14, B8614C64, B8806060, or B8806238 resulted on a blue screen right once I turn it on to warm up.  No button does on the printer.  Nothing prints.  The computer is running Windows Vista 64 bit and it says the printer is offline.  Solution Center HP on the computer says the printer is disconnected when it is still connected.  If you click the power button, the printer turns off momentarily then returns to one of the four messages code listed above.  I unplugged the printer completely moved and plugged into a power source in the kitchen and the same error message and no button responds.  We had the printer 18 months without any problem.

  What you experience is a fatal error in the firmware of the printer. In this case, it's not much, you can do. Try a hard reset first. If the error is not clear, you can try to do a partial reset. If none of those working, you need to replace the printer.

  To do a hard reset:
  1. make sure that the printer is turned on.
  2. pull on the power cord from the printer.
  3. pull out the power cord from the wall.
  4. wait for 30 seconds.
  5. plug in the printer and turn it on.

  To make a partial reset:
  1. make sure that the printer is turned on.
  2. pull on the power cord from the printer.
  3. pull out the power cord from the wall.
  4. wait for 30 seconds.
  5 connect the power supply cord inot the wall, but do not connect the printer.
  6. press 3 and # buttons.
  7. while now buttons, plug in the printer.
  8. when the lights come on, release the buttons.

• Upgrade want a reader Blu - ray after buying 8500 XPS

  Hello

  I bought an xps 8500 not long and it's great, however, I do not regret the upgrade to a Blu - ray disc drive. My question is can I do it now, without voiding the warranty or mess up anything else. I am a novice so please bare with me.

  Hi DiAcosta,

  It can move the player to a Blu - ray, one player and it will not void the warranty. Drive Blu - ray alone will not guarantee, but the other parties will continue to have the Dell warranty.

• What brand of blu ray discs work on a 8500 XPS?

  Hi, I ordered a XPS 8500 with a blu ray burner and I was wondering what experiences people have had to burn? What brands have worked well and what resulted mainly in the roller coaster? Thanks in advance.

  Hi rookie128,

  Dell engineering team have not been defined any known problem with burning discs, or other problems with the Dell XPS 8500 System. Ideally, all Blu - ray discs that can fit into the Blu - ray player can be used.

• OfficeJet Pro 8500 leaking blue ink.

  I'm trying to disassemble the printer to gain access to the rear of the cartridge that assembles. I'm unable to remove the side panel of the case. Advice or suggestions appreciated! If I find the leak at the back of the Assembly, is - this repairable?

  Hello Keith,

  I just finsihed a repair of my Officejet Pro 8500

  At first, I did not see also all the tubes have been pinched as suggested by Ciara, however, the black and magenta tubes were damaged near/behind the sled print head. I think that they have abandoned their guides and am stuck on several occasions by the sled.

  To fix it, I used pieces of wire insulation I pasted above the damaged area. I have documented the repair with images and some instructions, but unfortunately, I can not attach the file here. If you do not empty your printer, you can have a go... don't take too long. Send me an email and I will send you the PDF document.

  Here is a picture of the repaired area:

  

• my printer... HP Officejet Pro 8500 A print only in two colors... pink and blue. It has all new ink cartridges... My computer is runing Vista Dell

  My computer guru says that the computer is ok and the connection.  but after running the diagnostics... it just doesn't change anything... He won t

  or copy.

  Someone else has had this prob?

  Thnks tank

  Hello

  You can uninstall and then reinstall your printer using the right drivers and installation on the HP Web site information, but I think it's more a physical problem with the ink cartridges and how they were installed, and the configuration.

  There are some troubleshooting steps for her it too when you select the correct printer model number.

  You have given us a serial number printer, rather than an exact model number

  http://WWW8.HP.com/us/en/support-search.HTML?tab=1#/qryterm=HP%20Officejet%20PRO%208500&search_searchtype=s-002

  Or you can also ask in the Forums of HP's Support.

  http://h30434.www3.HP.com/PSG/

  @@@@@@@@@@@@@@@@@@@@@@@

  This can also help you:

  "Solve printer problems.

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-printer-problems

  "Solve printer problems.

  In the upper right corner, select your operating system from the menu drop-down.

  http://Windows.Microsoft.com/en-us/Windows/printer-problems-in-Windows-help#fix-printer-problems=Windows-XP&V1H=win8tab1&V2H=win7tab1&V3H=winvistatab1&v4h=winxptab1

  See you soon.

• OfficeJet Pro 8500 a: 8500 a plug the USB to the PC and wireless for Mac

  Our Officejet Pro 8500 a is connected via USB to our HP Pavilion running Windows 7. This connection works well. However, I tried to connect my iMac (OS 10.10.2) to the wireless printer with no success. If I disconnect the USB from the PC, I can connect wirelessly from my Mac. My question is: the Officejet Pro 8500 a does support multiple types of connections - one by USB and the other by wireless? If so, then I would appreciate help to understand why my Mac is not the 8500.

  Other details: our wireless router is Apple Airport Extreme. The wireless connection on the printer seems to work (I can print the details of this connection). However, when I try to add the 8500 to the Mac by using add printer, the printer does not appear. (The printer is lit and shows five bars of signal strength, SSID is correct and a valid IP address).

  My Mac is connected to the wireless network.

  Any suggestions?

  I was able to solve the problem of the printer with ethernet connection to the router that provides network wireless for PC and Mac. Now two machines are able to access the printer with no problems. By connecting with an ethernet cable, connect the printer wireless has been disabled. It had to be done because the wireless radio had become unreliable. The idea was that the blue wireless light never came. Thus by connecting wired LAN, all problems are gone. Thanks to the team of Geed for help.

• HP Officejet Pro 8500 Premium a scanned PDF files in legal format, but I want letter format

  Hi, I have an iMac with OS 10.7.5 and my Officejet Pro 8500 a Premium makes the computer scans that are of legal size, when well even the original is letter size. I don't see how to change this in the HP utility. I don't have a scanner software, because I was able to install HP. My doc driver does not work either. Any ideas? Thank you.

  Hey @JosieB,

  Welcome to the Forums of HP Support!

  I understand that you encounter, software, scanning and ADF questions on your HP Officejet Pro 8500 a Premium e-all-in-one printer. I would like to work with you today with the resolution of these problems. To make the resolution of the problems I will divide this post into three sections. Each section represents one of your problems. I know that in your message you can set your analysis of the rather than a legal letter and that you use the HP utility by scanning because your drivers and software HP does not able to install correctly on your Mac. I'll also provide you with steps to solve this issue.

  Question 1: The software installs:

  Please perform the steps below to properly install your HP software and drivers for your printer on your Mac OS X 10.7.5 Officejet operating system.

  Step 1: Uninstall the drivers and software:

  Uninstalling the printer software
  
  Step 2: Check and repair your Mac disk permissions:

  1. Open Macintosh HD and go to Applications
  2. Go to the Utilities folder
  3. Open disk utility
  4. Select the hard disk volume, you use (usually on the left)
  5. Select verify disk permissions
  6. Once this process is complete, select repair disk permissions

  Step 3: Check the Apple updates:

  1. Go to the Apple
  2. Select System Preferences
  3. Select software update
  4. Click update now
  5. Install your available updates
  6. Computer restart

  Step 4: Reinstall your software and drivers:

  Please click the following link to download and install the appropriate drivers for your HP Officejet:

  HP full feature software and drivers - OS X Lion v10.7

  If you need installation assistance once the drivers are downloaded, please visit the 2 documents below.

  USB: Install Help for Mac OS X 10.7

  Wireless: install Help for Mac OS X 10.7

  Question 2: Could not parse the format letter:

  Once your software is installed properly your HP or HP Scan utility software parameters must be set correctly once more. Here is the HP document on how to Scan with the HP scanning and software without scanning your Mac computer HP software. The support document also explains how to change the settings for scanning.

  Scan from OS X Lion v10.7 with full software functionality HP for HP Multifunction printers

  Failure help, you can also try:

  1 open The HP utility and select your device.
  2. based on Scan Settings open the "Scan to computer".
  3. click on the tab "scan tasks.
  4. Select the shortcut Scan allows to analyze, and then click modify.
  5. in the section of scanning from an HP device, click the blue triangle to expand the menu.
  6. in the expanded menu now, open the drop-down list next to Cultures to and set as letter
  7. click OK and try to scan the image.

  Question No. 3: Automatic Document does not work:

  Finally, in order to get your ADF, work again on your product, that I will give you some detailed troubleshooting steps. Because you have not noticed if you having paper jam errors or that the product just will not pick up paper at all in the charger, I'll give you the steps of troubleshooting for both scenarios.

  One "original jam: clear jam and press OK"Message appears.

  More than one Page at a time is nourished by the all-in-one -please only through 'three Solution: clean the automatic document feeder' of this document.

  Please let me know if the steps I have provided to resolve your problems. Good luck!

• Misalignment of the heads - Officejet Pro 8500 has more e-all-in-one printer A910g

  Oops.  Typical message in subject line.  I'll try again.  I have an Officejet Pro 8500 has more e-all-in-one printer A910g.  I replaced my cartridges of ink three colors, and cannot print, print jobs are in the queue... and I get an error message on the display screen 'alignment failed.  Refer to the documentation for the device for more details. "Also, even though the level of ink Cyan poster now full on the screen, I get no blue on the print head alignment test document.  Help!

  I'm sorry that you are experiencing this issue. Sometimes, when you get this error message, maybe it's the ink or printhead may need to be cleaned.

  Here is a link that can help you with this problem.

  http://support.HP.com/us-en/document/c02207121

  Let me know if it helps. This isn't a software problem, you do not have to uninstall the software and things of this nature.

• OfficeJet pro 8500 wireless problems

  Hello

  I have a HP Officejet Pro 8500 has more printer, set up my wireless network. It is connected to my Linksys E2000 wireless router (wireless, do not use the LAN cable). I print from my Win7 64 bit laptop, my iPhone / iPad (via airprint).

  This configuration is used to work perfectly, and 1 day to the other, I can not connect to the printer. I think that this happened after the printer has proposed an update of the firmware. No changes have been made to firmware on my laptop or a router, without the router settings have been changed.

  If I use my i-devices, no airprint printer is detected. From my laptop, I get an error indicating that a connection to the printer cannot be established.

  I tried selecting the IP manually (192.168.1.120), I did a factory reset the printer and run the wizzard wireless again and finally I connected a router LAN cable direct to the printer. I managed to connect the printer to the network, the network printer diagnostics detects any flaws, but the machine is still invisible to other devices...

  Now, I'm quite stuck...

  wingwalker1, is the light on the printer and a solid blue wireless? She has the same IP as before (which is the IP address if it has changed)?

  When you say thayt it has not completed the wireless configuration wizard, at - he gave a specific failure message?

  I want you to do a reset of network. First turn off the printer and the computer, and then unplug the power to the router for 10 seconds and plug it back. Wait for all lights to come back on the router and turn on the printer and the computer.

  Go to wireless menu, reset the network defaults and restart the wireless configuration wizard.

  I would like to know how it goes!

• HP Officejet Pro 8500: Officejet Pro 8500 hp printhead question

  My printer does not print Cyan. I replaced the ink cartridge. Clean the print heads. Has taken the print head and it was blue ink on it. A picture of the problem. All other colors will be printed.

  Hello @Cynusps

  Thanks for posting on the HP Forums!

  Looks like you did more troubleshooting for your question.  I do not recommend remove the printhead again and clean the copper contact us about this.  Ink can get on the copper contacts not cause the print head to get a good signal of the printer and cause poor quality.

  Print heads are also a replaceable part in the printer and must be replaced as cartridges from time to time.   Here is a document concerning the fixing of problems of quality Print for the HP Officejet Pro 8500 all-in-One Printer Series.  If you fill the document with no resolution, you may need to replace the print head.

  Here is a link to the page for the purchase of print heads: HP 940 printheads

  Let me know how it goes!

• HP OfficeJet Pro 8500 909 a - error B87126D0

  Receiving an error code of B87126D0 for HP 8500 wireless printer.  Printer will not turn off or restart properly.  Goes into a loop of full automatic test and finally clearly isn't the problem.  Conducted several hard resets, power disconnects and other troubleshooting steps, but they do not clearly the problem... The printer screen says "Turn off and then back on.  The following lights are flashing: phone (auto answer)! , blue wireless symbol and the power button.  Keyboard / function keys allow for the entrance - the only button that responds is the power button which translates the same loop long selftest.

  Hi @teebone22,.

  Thank you for visiting the Forums HP's Support and welcome. I read your thread on your printer HP Officejet Pro 8500 A909a and get the error B87126D0.

  Plug the power supply directly to a wall outlet works. Do not plug it into a power strip, surge arrester, or secondary power source. Like that might be the cause of the error.

  Here is a link to the HP print and Scan doctor. HP print and Scan Doctor performs a check of your system and check the firmware of the printer.

  Here is a document on the error codes and their meanings. First Solution: reset the product

  I hope this helps.

  Thank you.