8630: connecting the new HP Office Jet Pro 8630

Similar Questions

• Trouble installing the software and the driver for Office Jet Pro 8600

  I get error that "additional software is necessary to continue' when I try to install the software and drivers for my wireless printer Office Jet Pro 8600. I just got a new laptop and had at first no parameter problem the printer and it prints fine, but now for some reason it is not print at all. I tried to restart my laptop and printer several times, but it keeps saying printer offline even if it is connected to my wireless. I followed the recommendation of an assignment that suggests to abolish the printer and reinstall, which is where I am now. Now, I can not install this printer at all by the above error message. Help, please!

  Thank you!

  Hi HSchulz,

  When you try to install with the CD, try installing the latest Windows 7 driver from the HP website. Restart the computer, turn off the printer, then reboot your router and then launch the installation. Here is a direct link to the driver file:

  http://ftp.HP.com/pub/softlib/software12/COL40120/bi-108858-4/OJ8600_1315-1.exe

  Select the connection Wireless option during installation to get the printer on the network and associated with the laptop. Let me know if this helped at all...

  I work on behalf of HP.

• Loss of wireless connection between Mac and Office jet pro 8500 has more

  My printer has been successfully implemented with my mac but loses the wireless connection.

  I'm on OS X Lion (but the same problem happened with Snow Leopard).

  My router is provided by BT Vision.  Also on the original hub is an apple TV and phone 3 handsets.  I don't know what channels to use them and do not know how to find out.

  Network Setup page shows no problem, but the mac cannot connect to the printer.

  Any suggestions please?

  If the printer has a valid IP address (not 0.0.0.0 or 169.254.X.X) then it is always connected to your network.

  If your router is a BT HomeHub, you're not alone.  A lot of people on these forums have had trouble with them and most of them that I couldn't help.

  The only kill-TI-dead solution is to buy a standard router (Linksys or Netgear), attach it to your BT and connect everything to the new router.

• How to organize the order of the icons on the touch screen of the printer? (Office Jet Pro 8600)

  I use the touch screen only to scan documents. It's annoying to scroll through a series of unused icons to achieve the scan icon whenever I turn. How to reorder the icons so that the "Scan" icon is on the main home screen (on an iPhone that would be just pressed until it's mobile, but it does not work here).

  You can customize the selection and order of the icons in the Apps folder, but I can't figure out how to move the other icons. Come on HP, your intuitive user interface needs some attention

  Thank you!

  There is no option to rearrange the icons of an Officejet Pro 8600. Icons available is determined by the firmware of the printer and is immutable.

• How to find the code on Office Jet pro 8600 x

  Trying to add my printer 'Office Pro 8600 Plus' eprint and cannot find the printer code «»  Having the email address, but when I print the settings - it just has the email address and told to go to the HP eprint center... very frustrating.

  Any help would be appreciated.  Spin through the setting wireless on Mac w/Lion

  Try this: go to the front panel of the printer, select Setup > Setup option of Web Services to enable Web services. Ensure that both ePrint and Apps are in position 'ON' in the configuration of Web Services. A page should be printed with the printer on it code.

  Then go to, click this URL on the 'Sign up' to enter the code for the printer
  https://h30495.www3.HP.com/c/45333/us/en/

  More information can be found here: http://h30434.www3.hp.com/t5/ePrint-Print-Apps-Mobile/START-HERE-How-To-amp-Troubleshooting-information/td-p/572603

  Hope this helps! Happy discovery!

• New HP office jet pro 8610

  I would like to be able to scan documents to email Gmail, AOL accounts, etc., directly. Is this possible with this printer? I don't want to scan to another thing. If this isn't the case, I will return it. This feature is very important to me. Also, if possible, has an address book, so I'll not need to type in the same mails that I use to scan documents every time?
  Please answer as soon as possible. Thank you very much. Aggie

  Hi there @Ffagent aka Aggie, welcome to the forums!

  Yes you can scan email with your Officejet 8610.

  Click the manual below to see how to set up and use the scan to e-mail functions.

  User manual

  

  Have a great Thursday

• Office Jet Pro 8600: office jet pro 8600 clear the display

  I have an Office Jet Pro 8600 and need to know if there is a way to fix the screen faded. You don't see the options like print, scan, fax, tools...  It isn't that I know where they are and who's who for the most part.

  In addition, scanning is not clear.  Everything is faded.  However, it still prints and faxes by a fine.  I hope I don't have to buy a new All In One Printer.  I finally got most of the glitches and tricks when I have a problem with it.  Is it possible that there is a light bulb needs to be changed or something?  I appreciate your help & feed back as soon as possible.  I use in an office on a daily basis.

  Kind regards

  Meredith

  Hey @mere4340,

  Welcome to the Forums of HP's Support.

  I see that you have some problems with the copy and see the display on your Officejet 8600 e-all-in-one printer. I can help you with that.

  To start, make sure that the printer is plugged directly into a wall outlet, not a surge protector. Once it is, while the printer is on, remove the power cable at the back of the printer for one minute.

  If after the above, that you can't always see the screen or copy clear, the printer needs to be replaced because it has no replaceable bulbs in the scanner or the display. You can contact the HP Support by clicking here and filling out the form below to see what options are available.

  Please let me know if that solves your problems. If so, please click on accept solution. If you appreciate my help, please click on the thumbs up icon. The two icons are below this post.

• Office Jet Pro 8600 that printing of the iPad

  I am running Linux Ubuntu 12.04 LTS and have recently have not been able to print from it. My printer is the Office Jet Pro 8600, and on the first week I got it Setup print without problem. Now, I can only print from my iPad and when I try to print from my computer it says that it completed the work.

  Hello frashure11!

  About your problem, I suggest you check if you receive the internet signal or uninstall and reinstall your HP printing software again. The reason of why I tell you to do these is because when you try to print wireless, then you know how much you receive signals. For example, if you do not receive the maximum amount of the signal, then the chances are that printing occurs slowly. Sometimes, you can also try to uninstall the printer software and reinstall it again. But before you do that, re - check that your internet connection is to give a signal properly. I prefer lets you choose a password that has a security code, so that you can receive the maximum signal, somewhat, rather than having several people use it. Thus, your internet will go slowly and your impression will slow down.

  I hope this works!

• Office jet pro 8620: should I disable the printer without cartridge installed?

  I removed the original HP ink that was defective and took it back. Now I have the inkjet (Office jet pro 8620) without cartridges installed. The printer says not to disable so that it does not get damaged but I'll be away for a week and want to turn the printer off. I will cause damage if they do?

  Thank you. I guess I'll have to keep on like this for a week then. Too bad.

• HP Office Jet Pro 8600 help how do I enlarge the print on an original when it is in copy mode?

  I find it on my help screen how do I enlarge the print on a copy of an original document that I want to copy. I have Windows 7 on my computer and printer is HP Office Jet Pro 8600 wireless. I have a printer HP (3 in 1 officejet) before and it was much more user friendly. Is to use the online mode?

  Here is a link to the user manual. To get the possibility to enlarge the copies, press this option on the display of the printer, then tap SETTINGS and then select resize, use the right arrow key to scroll through the sizing options on the printer. Changing the settings of copy is covered on page 59 and 60 in the manual. I hope this helps.

• HP Office Jet Pro 8600: Error Message: Scan in use - wait until the job is done

  Have used my scan function without problem since the purchase of machine and one year on Microsoft Windows 10.  Last week I did some scans - now this week when I try to use my scan function I get the following error message: Scanner is busy.  The scanner is currently in use.  Wait until your previous task is completed, and then try to scan the image.

  -There is no unfinished business and I can't find anywhere to clear the error or erase any task the scanner thinks he's working on.  Has anyone met and solved this problem?

  Thanks in advance for any help you can provide!

  ritao

  Hello

  Thank you for using the HP forum. You can try the following:

  Please download and run the HP Print and Scan Doctor (PSDR) tool to diagnose and solve your problem

  http://h20180.www2.HP.com/apps/NAV?h_pagetype=s-926&h_lang=en&h_client=s-h-E016-1&h_keyword=DG-PDU

  If this does not work, you need to maybe uninstall and reinstall the software COMPLETE features:

  Please uninstall and reinstall the software COMPLETE features, follow these steps:

  1. download and save the software COMPLETE features (do not install online)

  http://support.HP.com/us-en/drivers/selfservice/identify?q=+HP+Office+Jet+Pro+8600&tool=s-002#Z7_3054ICK0K8UDA0AQC11TA930O2

  Before you download, choose the right model, the operating system and complete software functionality.

  2 uninstall the software from your computer
  3. install the FULL feature software "saved".

  Here are some resources for you scan:

  Quick Guide for scanning needs

  http://h30434.www3.HP.com/T5/scanning-faxing-and-copying/quick-guide-to-your-scanning-needs/m-p/5625126

  Hope that helps!

• How and where can I load legal size paper on the HP Office Jet Pro 8600 Plus?

  I have just purchsed the HP Office Jet Pro 8600 Plus and I wanted to print on legal size paper, but I can't figure out how to do this.  Can anyone help?

  There is a blue tab at the end of the paper tray.  That push and the plateau extends to the legal size.  Hope that helps.  Now what about this one: I want to charge 11 "legal in Tray 1 and tray 2 and, hopefully, the printer will know what bin to shoot when you print legal documents?

• New Office Jet Pro L7780 problem

  I just bought an Office Jet Pro L7780 at an auction and there was no power cord for it. I thought that I can buy one but indicated in the manual does not fit. The place that shows manual for plugging is not the same thing on my device. I don't know what kind of food in order to buy and where exactly he's going.

  Hi Luther133,

  The parts you need are listed below and a link to the site of HP replacement parts.

  67339 C8187 - module power - input voltage 100-240 VAC, 50 / 60 Hz - output voltage 32VDC, 2500mA - requires a power cord detachable sector (worldwide)

  8121-1023 - AC power cord (Black) - 3 conductors, length of 0.5 m (19.6 in)

  http://h20141.www2.HP.com/hpparts/partsdirectory/catalog_solutions_NA.htm

• HP Office Jet Pro 8100 - the deactivation of the wireless network

  I have a HP Office Jet Pro 8100 with wireless network.  Is there a way to turn wireless off?  I need to use an internal network, but can not use wireless.

  HI - just press the button wireless (lower right) on the display panel and it will switch the functionality of wireless enabled or disabled.

  Hope that helps.

• How to choose a print with black ink only on the Office Jet Pro 8600?

  How to choose a print with black ink only on the Office Jet Pro 8600?

  Please read this post then provide some details.   What operating system? For Windows 7, the setting must be in the Advanced tab as shown below.  Note that color ink may still be necessary to avoid that the print head clogged, see here for more information.