Ability to purchase the CRIO

Similar Questions

• How to run terminal console of the CRIO output rtexe

  Hello

  I want to run the rtexe application in CRIO (9014) from the console output terminal. In my application the availabe lan port is connected to any other device using cross-over cable. That's why I want to change application console using the console terminal. I tried the taskspawn command but the crio restarts. Is there a command so that I can run the terminal console application.

  ... I don't know how to get any input from keyboard (the new path of application) of the console terminal...

  You can use the interface for RS232 communication standard series. If for example you send 1, 2 or 3 as a string to the cRIO and then you change by program the ni - rt.ini to change the path of access between a startup2.rtexe and startup1.rtexe, startup2.rtexe.

  Moreover, I have to restart the controller every time I change the path.

  When you use the method with the executable and then one more, then Yes.

  IAM cannot use the Subvi because I need to change code fpga also to different instances.

  I don't understand why using SubVIs on the RT does not give you the ability to change the fpga code.

  If the second method example would be Sub1.vi, Sub2.vi and Sub3.vi. When you get the 2 interface command series, you close the reference to the FPGA1.vi that is used in Sub1.vi and stop Sub1.vi. Then, you start by program Sub2.vi where you open and run the FPGA2.vi.

  Christian

• Is it possible to increase the font size on web pages? I can increase the size of the page but then lose the ability to see the entire page.

  I've just updated El Capitan, but the font size on web pages went all teeny weeny.

  I was wondering if we could increase the font size? The page can expand via "zoom in", but then lose the ability to view the web page in the blink of an eye.

  Thanks in advance.

  Yes.  Open the Terminal app and type the following command followed by the Enter key or return:

  : write com.apple.Safari com.apple.Safari.ContentPageGroupIdentifier.WebKit2MinimumFontSize - int XX

  (triple click on the line to select it to copy and paste into the Terminal application).

  Change the XX to the font size you want as the minimum font by default.

  Or you can use a css style sheet.  This site describes it and the Terminal method: specify Minimum font size in Safari 10.0, macOS Sierra

  

• I want to back up why iMovie on an external hard drive and.  retain the ability to modify the backup version

  I want to back up why iMovie on an external hard drive and.  retain the ability to modify the backup version. Thank you for helping me best wishes, Garvin Bazzell "Bazz.

  You can in the finder copy your library to EHD. Make sure that the EHD are formatted OS Extended journaled. Open the library in iMovie to make sure that it copied correctly.

• In a sequence of CTF, is it possible to obtain a text file of sequence clips display? There is a display of text file for clips (cmd-9). Zoom the timeline cancels the ability to see the whole sequence of the time line.

  In a sequence of CTF, is it possible to obtain a text file of clips in sequences display (name and duration)? There is a display of text file for clips (cmd-9). Zoom the timeline makes this visible annotation for shorts, cancels but the ability to see the whole sequence of the time line. Of course, it would help my editing.

  TIA

  In Final Cut Pro 7, you can use editing > find command to search on used clips in the sequence. See if there is an equivalent command in FCE. Unfortunately, I can't determine that at first hand on my system. (In addition, if you are still interested whereas FCP X, there the so-called Timeline index which provides quick access to a list of markers, clips, effects, etc..)

  Good luck.

  Russ

• Inkjet HP 2545: lost the ability to print the text

  I've lost the ability to print the text. Cards print, but without text etc etc.

  In the paper here troubleshooting steps can help solve the black print is not on your Deskjet printer 2545.

• The 2011 versions of Microsoft Office (Word, Excel, etc.) can be run on an iMac OS 10.11 running?  If not, is the only solution to purchase the latest MS Office suite?

  The 2011 versions of Microsoft Office (Word, Excel, etc.) can be run on an iMac OS 10.11 running?  If not, is the only solution to purchase the latest MS Office suite?

  Office 2011 and 2016 for Mac running OS X El Capitan, you can install Office 2011 if you bought. Don't forget to update the latest version.

• cRIO-9074 ethercat with a switch/hub between the cRIO and slaves

  Hi, I have a cRIO9074 I'll use 7 JVL EtherCat Mac800 motor control.  Engines are fairly spaced, so I use a switch of CU2005 EtherCat Beckhoff 5 ports between the readers and the cRIO with 2 motors in series on three legs and a motor on a port by itself.  My problem is that labview will not find all engines unless one of the ports on the switch motor is plugged, or a line of engine is connected directly to the port ethercat cRIO.  He has no problem see two engines on the same line, it just will not see one of them if more than one line of motor is connected to the switch ethercat.

  Thus, HALP!

  
  

• 9033 OR & NI 9870 - series recording parameters do not restart the cRIO.

  Hello

  I have a cRIO OR 9033 with two RS232 9870 cards. The two cards series and their ports do not appear when I turn on the cRIO. When I run my executable in real time, once it crashes, saying: he cannot find the ports I ask. After that it crashes, the channels appear in MAX and VISA resource controls, and when I run the program a second time, it works very well. Why does this happen? Is it possible that I can have the save of the series, so I don't need to have the program crash whenever the cRIO starts?

  I run my program in hybrid mode. I Interface FPGA and including two maps cRIO outside the FPGA target, like this:

  

  I tried the cancellation of the deployment and the deployment of all, but it does not help. It blocks the first time regardless if I execute the suite of LabVIEW Development or if I deploy it as an RT executable and run at startup.

  Here are some pictures of what is happening:

  10-port VISA should be available. The two on the chassis and four for each card to 9870.

  When I start first cRIO, only the ports of two chassis looks for selection in a control channel VISA:

  

  And the channels do not arise to the MAX:

  

  Showing also currently installed software.

  When I go to the settings of NI-VISA 14.0.0 page I see this:

  

  Channels appear here, but nowhere else.

  When I try to run my program, I get this error:

  

  And after the error, the channels appear in LabVIEW and MAX!

  

  

  Series settings will remain as long as I leave the cRIO powered. If I disable, settings series pannals and I need run my program once only it crash before I can use the serial ports.

  I would really like for these settings apply automatically without having it fail the first time.

  Any suggestions?

  I also run hybrid FPGA on cRIO with cards 9870 and 9871 under the scanning engine you are. I also noticed behaviour buggy when accessing the COM ports - for example, if the cRIO running the executable version of his program and you interrupt it to run the same program in interactive mode, often, you receive the error message "missing resources VISA." So what I do is restart the cRIO with the disabled startup application.

  I honestly would not bother to configure anything through MAX when it comes to your cRIO. You configure port configuration programmatically. In the process of initialization of your program, open your bitfile, run it, wait, a few seconds to have everything settle, make a VISA "find resources" and confirm all your ports appear, then use the VISA to configure and open the port by program. This way worked for me.

• IP address on the cRIO-9075

  I have a cRIO-9075 serving piece of alternative/backup for one of our production test systems.  I was about to try a new code on this backup, but I can't connect to it.  I searched in MAX and tried to ping to the IP address that it should be, but I get no response.  It has been configured with a static IP address so it would be ready to be deployed if necessary.

  Is there anyway that I can get back to the default IP address so I can connect to it?

  Take a look at page 17 of the user of 9075 Manual: http://www.ni.com/pdf/manuals/375650b.pdf

  To reset the IP address of the 9075 you will need to walk through the following steps:

  1 press and hold to reset for 5 seconds, then release. The status light
  comes on, then starts to blink three times every few seconds. The
  chassis is now in safe mode with the release of the compatible serial port.
  You can use a serial port terminal to read the IP address of the
  controller. If you want the controller to a new DHCP protocol
  connection, go to step 2.

  2 press and hold to reset for 5 seconds, then release. The status light
  Repeat the same behavior. The cRIO-9075/9076 trying to establish
  a new connection to DHCP. If he fails, he attributes to a link-local
  IP address. If the DHCP connection is effective and appropriate for
  your application, go to step 4.

  3. configure the IP address and other network settings in MAX.

  4. press and release the Reset button to restart the chassis.

  The following documents will also be useful.

  Why don't my CompactRIO or Single-Board RIO controller is displayed in Measurement & Automation Explorer (MAX)? - http://digital.ni.com/public.nsf/allkb/ABE4BC247E8AC9BC8625734E005CAB42?OpenDocument

  Connection to a target LabVIEW Real - Time (RT) directly with a cable crossed - http://digital.ni.com/public.nsf/allkb/72AE8CADA1AF075686256A16005D55B1

• cRIO 9068 + Scan Engine Support error - even if it is installed on the cRIO, after the deployment of error says his lack

  All,

  I have a cRIO-9068 I try to use the scan mode for. I have intalled all the latest drivers and software as explained. However, when I put my chassis to scan mode, then select deployment all, I get this error on my chassis and all my modules:

  "The current module settings require a NI Scan Engine support on the controller. You can use Measurement & Automation Explorer (MAX) to install a software package recommended NOR-Rio with NI Scan Engine support on the controller. If you installed LabVIEW FPGA, you can use this module with LabVIEW FPGA by adding an element of FPGA target under the chassis and drag and drop the module on the FPGA target element. »

  Everyone knows this or know why labVIEW does not recognize that the software is installed on my cRIO or is it not installed correctly?

  AGJ,

  Thanks for the image. I saw a green arrown beside all my pictures of chip and it seemed that meant that the software wasn't really being installed. I formatted my cRIO and did a custom install. My problem was that I had the two labview 2013 and 2014 installed and the cRIO put conflicting versions of software. After doing a custom installation and choose only the versions of 2014, my picture now looks like yours!

• The cRIO serial port can be used for the CAN bus communication?

  I would like to order a CVC with a CAN of network device and would like to know if this can be accomplished by using a serial port integrates the cRIO (OR cRIO-9024 in my case). Is it possible, or would need a C Series module CAN?

  You need a C Series module. Series and CAN use a DB9, but they do not have the same physical layer.

• FTP .txt file copied correctly the cRio

  I use the 'FTP Get File.vi"to retrieve a .txt file of my CRio, which is then copied on my host.  The file is a delimited data tab.  The file copied all the data a except that the copy has a blank line between each set of data.  These additional lines take me to read the incorrect lines when the file is read in my program later with the "reading a spreadsheet file.  These additional lines come  I checked the original on the cRio file transfer via MAX and these lines do not exist.  Can someone tell me how to solve this problem?  Thank you

  If you look at the entries for the File.vi FTP Get, you will notice that there is one that says binary:

  

  By default, this is false, which means that it copies the data in an ASCII format.  Try a real constant of wiring to this entry.  It's the need for VxWorks and Windows use different end of windowing.  This difference is probably the reason that it is adding lines to it.

• What is the MTBF method, used for the cRIO 9012, is the method of counting of Telcordia under what conditions?

  What is the MTBF method, used for the cRIO 9012, is the method of counting of Telcordia under what conditions? (Temperature, humidity, etc.)

  Hi jojosalud,

  According to the specifications for the cRIO-9012, the MTBF is 330 481 hours at 25 ° C; Question of Bellcore level II.

  Kind regards

• MAX does not see the cRIO modules!

  Hello

  I have a cRIO-9073 and C 3 (9401, 9239, 9263) modules installed in slots 1-3 respectivly. I can configure the chassis correctly upon arrival 2 months ago and I managed to acquire by a module 9234. Now that the 3 mentioned c modules arrived I installed and have a problem - MAX of nothingness, or analysis of LabVIEW RT engine cannot see modules. Attached are MAX.png and DiscoveryStatus.png that depict. NOR-RIO is version 4.00 and corresponding set is completely downloaded to the cRIO. I do not understand the concept of software cRIO yet but I'm positive, that is the same as used to work the first time that I had tried. The network is OK - host is 100.0.0.1, cRIO is 100.0.0.100 and they see.

  I susspected that perhaps specific drivers are needed for these particular C failet, but I can't verify that the status of software.

  Basic details to accept and understand the CompactRIO concept is spread across many different documents, and it's really hard for the newbees to grasp, so debug/fix situations.

  Does anyone have an idea what is causing my problem?

  Thanks in advance,