Access to network connections

Similar Questions

• my wireless connection says "restricted access" no network connection. I used the same key code to get my other computer online

  my wireless connection says "restricted access" no network connection, I used the same key code to get my other computer I can have up to 5 computers online at the same time online.

  Ideas:

  • You have problems with programs
  • Error messages
  • Recent changes to your computer
  • What you have already tried to solve the problem

  Hello

  This means that the computer cannot connect to the router.

  Try this process.

  Check the Device Manager for the wireless card valid entry.

  http://www.ezlan.NET/Win7/net_dm.jpg

  If there is no valid entry, remove any entry from fake and re - install the drivers for the wireless card.

  Check network connections to make sure that you have a network icon/entry wireless connection, and that the properties of the icon (right-click on the icon) are correctly configured with the TCP/IPv4 protocol in the properties of network connections.

  http://www.ezlan.NET/Win7/net_connection_tcp.jpg

  Make sure that if there is Wireless Utility a utility vendor is not running with the native Windows wireless utility.

  Make sure you firewall No. preventing / blocks wireless components to join the network.

  Stack TCP/IP work should look like.

  Right-click on the wireless network connection card, select status, details and see if she got an IP address and the rest of the settings.

  http://www.ezlan.NET/Win7/status-NIC.jpg

  Description is the data of the card making.

  The physical address is MAC of the card number.

  The xx must be a number between 0 and 255 (all xx even number).

  YY should be between 0 and 255

  ZZ should be between 0 and 255 (zz all the same number.)

  The date of the lease must be valid at the present time.

  * Note 1. IP that starts with 169.xxx.xxx.xxx isn't valid functional IP.

  * Note 2. There could be an IPv6 entries too. However, they are not functional for Internet or LAN traffic. They are necessary for Win 7 homegroup special configuration.

  ---------------------------------------------------

  Above everything is OK, you must be able to connect to the router.  A window that says connected does not mean that you are really connected. Connection to the router means that you can enter the IP of the router base in an address bar in one go, being able to connect and configure the router menus see. If it is not connected in the log to router from any computer that can connect to the router wirelessly with a wire, disable wireless security, (make sure that the wireless SSID broadcast) is on and try to connect with no. wireless security.

  --------------------------------------------------

  I really checked and configured every thing and it doesn't work.

  Software firewall application that is not configured to allow local traffic (between the computer and the router is also a possible problem.
  some 3rd party software firewall continue to block the same aspects it traffic Local, they are turned Off (disabled). If possible, configure the firewall correctly or completely uninstall to allow a clean flow of local network traffic. If the 3rd party software is uninstalled, or disables, make sure Windows native firewall is active .

  Jack-MVP Windows Networking. WWW.EZLAN.NET

• VPN remote access - no network connectivity internal!

  Hi Experts,

  I understand that it is a very common problem when considering the implementations of IPSec VPN for remote access using Cisco VPN Client. But for the last six months, I have tried to configure remote VPN access to as many sites customer and gets stuck to the top with the same question!

  -The remote VPN Client connects, authenticates successfully to the local user database (to make things easier, I used the local user authentication), the tunnel is set up (I could see the exit of the isakmp #show her as a AM_ACTIVE ). So I think that the parameters of encryption and authentication for Phase 1 /Phase 2 should work because the tunnel is having successfully established

  -Now comes the question, no connectivity to the internal network. I tried all the possible solutions, that I could find online.

  1. the most common problem is NAT - Traversal not active

  -Compatible NAT - T with the time default keepalive of 20

  2. None of the configurations NAT to exempt remote VPN traffic

  -A ensured that Nat configurations not present in configuration and internal network 192.168.1.X VPN traffic networks VPN 192.168.5.X /192.168.10.X being exempted NAT

  3-Split tunnel configurations

  -Reconfigured Split tunnel access list configuration Standard access list expanded (although not required as a Standard access list is more than enouugh, if I'm not mistaken) to allow traffic selected from 192.168.1.X for 192.168.5.X/192.168.10.X that will create routes on Client that allows users to simultaneously access VPN resources and access Internet VPN client. The Tunnel from Split network group was added again to the group policy.

  4 enabled Perfect Forward Secrecy (PFS) /Disabled

  . It may be an extra charge, it has been disabled / enabled

  5. the road opposite Injection

  -Ensured that a temporary reverse route has been injected to the routing table by allowing the reverse Route Injection to insert automatically the temporary static routes to the remote tunnel using the command set reverse road networks

  A few more interesting things were noted:

  Encrypted and Bypassed packages found when a continuous ping started the ASA inside the interface.

  No decryption happens of the VPN Client, which means that there is no answer back from the network traffic statistics.

  Decryption and packages are found be increasing when I try to ping of the IP address to the customer (192.168.0.10) has published the SAA. But on the SAA, I'm not back any response and showing as? . So that would mean that there is communication of ASA to the customer via the VPN tunnel while no communication is happening from the internal network to the customer

  

  The entire configuration is shown below

  ASA Version 8.2 (1)
  !
  ciscoasa hostname
  activate the encrypted password of AS3P3A8i0l6.JxwD
  2KFQnbNIdI.2KYOU encrypted passwd
  names of
  !
  interface Vlan1
  nameif inside
  security-level 100
  IP 192.168.1.1 255.255.255.0
  !
  interface Vlan2
  nameif outside
  security-level 0
  address IP X.X.X.X 255.255.255.0
  !
  interface Ethernet0/0
  switchport access vlan 2
  !
  interface Ethernet0/1
  !
  interface Ethernet0/2
  !
  interface Ethernet0/3
  !
  interface Ethernet0/4
  !
  interface Ethernet0/5
  !
  interface Ethernet0/6
  !
  interface Ethernet0/7
  !
  passive FTP mode
  access-list extended SHEEP allowed ip 192.168.1.0 255.255.255.0 192.168.0.0 255.255.255.0
  ST1 list extended access permitted ip 192.168.1.0 255.255.255.0 192.168.0.0 255.255.255.0
  pager lines 24
  asdm of logging of information
  Outside 1500 MTU
  Within 1500 MTU
  IP local pool testpool 192.168.0.10 - 192.168.0.15
  ICMP unreachable rate-limit 1 burst-size 1
  don't allow no asdm history
  ARP timeout 14400
  Global 1 interface (outside)
  NAT (inside) 0 access-list SHEEP
  NAT (inside) 1 0.0.0.0 0.0.0.0
  Route outside 0.0.0.0 0.0.0.0 X.X.X.X 1
  Timeout xlate 03:00
  Timeout conn 01:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02
  Sunrpc timeout 0:10:00 h323 0:05:00 h225 mgcp from 01:00 0:05:00 mgcp-pat 0:05:00
  Sip timeout 0:30:00 sip_media 0:02:00 prompt Protocol sip-0: 03:00 sip - disconnect 0:02:00
  Timeout sip-provisional-media 0:02:00 uauth 0:05:00 absolute
  timeout tcp-proxy-reassembly 0:01:00
  dynamic-access-policy-registration DfltAccessPolicy
  AAA authentication enable LOCAL console
  AAA authentication http LOCAL console
  the ssh LOCAL console AAA authentication
  AAA authentication LOCAL telnet console
  Enable http server
  http 192.168.1.0 255.255.255.0 inside
  http 0.0.0.0 0.0.0.0 inside
  http 0.0.0.0 0.0.0.0 outdoors
  No snmp server location
  No snmp Server contact
  Server enable SNMP traps snmp authentication linkup, linkdown cold start
  Crypto ipsec transform-set esp-3des esp-md5-hmac FirstSet
  life crypto ipsec security association seconds 28800
  Crypto ipsec kilobytes of life - safety 4608000 association
  Crypto-map dynamic dyn1 1jeu transform-set FirstSet
  Crypto-map dynamic dyn1 1jeu reverse-road
  dynamic mymap 1 dyn1 ipsec-isakmp crypto map
  mymap outside crypto map interface
  crypto ca server
  SMTP address [email protected] / * /
  crypto ISAKMP allow outside
  crypto ISAKMP policy 1
  preshared authentication
  3des encryption
  sha hash
  Group 2
  life 43200
  Telnet timeout 5
  SSH 0.0.0.0 0.0.0.0 outdoors
  SSH 0.0.0.0 0.0.0.0 inside
  SSH timeout 5
  Console timeout 0
  dhcpd outside auto_config
  !
  dhcpd address 192.168.1.10 - 192.168.1.132 inside
  dhcpd dns 8.8.8.8 4.4.4.4 interface inside
  dhcpd allow inside
  !
  a basic threat threat detection
  Statistics-list of access threat detection
  no statistical threat detection tcp-interception
  WebVPN
  internal RAVPN group policy
  RAVPN group policy attributes
  Split-tunnel-policy tunnelspecified
  Split-tunnel-network-list value ST1
  the address value testpool pools
  dk Z6zukyDvwVjP7o24 encrypted privilege 15 password username
  sv i1gRUVsEALixX3ei encrypted password username
  tunnel-group testgroup type remote access
  tunnel-group testgroup General attributes
  address testpool pool
  Group Policy - by default-RAVPN
  testgroup group tunnel ipsec-attributes
  pre-shared-key *.
  !
  class-map inspection_default
  match default-inspection-traffic
  !
  !
  type of policy-card inspect dns preset_dns_map
  parameters
  message-length maximum 512
  Policy-map global_policy
  class inspection_default
  inspect the preset_dns_map dns
  inspect the ftp
  inspect h323 h225
  inspect the h323 ras
  inspect the rsh
  inspect the rtsp
  inspect esmtp
  inspect sqlnet
  inspect the skinny
  inspect sunrpc
  inspect xdmcp
  inspect the sip
  inspect the netbios
  inspect the tftp
  !
  global service-policy global_policy
  context of prompt hostname
  Cryptochecksum:48f0863a70b8f382c7b71db0b88620fe
  : end

  ----

  Could you please help me identify where I'm going wrong. Its been a long time I have trying to figure out but nothing seems to work! ;-(

  Help, please!

  Thank you

  ANUP

  (1) pls replace the tunnel ACL ACL standard split as follows:

  no extended ST1 192.168.1.0 ip access list allow 255.255.255.0 192.168.0.0 255.255.255.0

  access-list allowed ST1 192.168.1.0 255.255.255.0

  (2) add icmp inspection:

  Policy-map global_policy

  class inspection_default

  inspect the icmp

  (3) Finally, I add the following so that you can test the ASA inside the interface:

  management-access inside

• We get an error "NETWORK CONNECTION ERROR, make sure a firewall is not blocking access to the printer.

  * Original title: printer error...

  I was printing with a printer wireless for months and now all of a sudden I'm getting an error, NETWORK CONNECTION ERROR and then readings make sure that a firewall is not blocking access to the printer.   I checked and it is not blocked...  I did a session of disorder and it reads no problems found.   Can someone please...

  Hello

  1. what version of Windows is installed on the computer?

  2. What is the brand and model of the printer?

  3. you have any non-Microsoft firewall installed on the computer?

  4. what security software is installed on the computer?

  5 have have there been recent changes made on the computer before the show?

  Please follow the steps below and check if that helps.

  Method 1: Run troubleshooting network printer and check.

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-network-printer-problems

  Method 2: Select the file and printer sharing

  http://Windows.Microsoft.com/en-us/Windows-Vista/enable-file-and-printer-sharing

  Method 3: I suggest to change firewall security settings, or disable the security software on the system and try to access the printer.

  Note: make sure that you enable the antivirus software, other security and firewall after the test programs.

  For more information, see the articles and check out them.

  Understanding Windows Firewall settings

  http://Windows.Microsoft.com/en-us/Windows-Vista/Understanding-Windows-Firewall-settings

  Enable or disable Windows Firewall

  http://Windows.Microsoft.com/en-us/Windows-Vista/turn-Windows-Firewall-on-or-off

  Allow a program to communicate through Windows Firewall

  http://Windows.Microsoft.com/en-us/Windows-Vista/allow-a-program-to-communicate-through-Windows-Firewall

  Let us know if it helps!

• Cannot start the network connection: invalid access to memory location

  Hi team,

  Windows 2003 SP2 cannot start the network connection. Error connections network service terminated with the following error: invalid access to memory location.  Can you help me on this issue?

  Thank you

  Sangaré

  Hello

  Your question is more complex than what is generally answered in the Microsoft Answers forums. It is better suited for the IT Pro TechNet public. Please post your question in the Windows Server 2003 Forum. You can follow the link to your question:

  http://social.technet.Microsoft.com/forums/en-us/winserverPN/threads

• "Unknown error" whenever I try to access the properties of the network connection

  Hi all

  whenever I try to access the properties of a network connection (e.g. via right click on 'Network'-> properties-> right click on a connection-> properties), type of connection according to what is, I get a message "Unknown error" box and I can't move forward.

  As a result, any setting of any network connection is not editable, more. For example, I wanted to force the IP of the local network of "assigned to DHCP" to "static" with an address fixed IP, but I can't.

  Another weird thing is that I even can't delete one of the existing network connections, even if there are a couple that are not in use for a long time...

  It should be noted that, apart from that, the network of connections work.

  What can cause this behavior, and that might be the way to solve the problem?

  I want to upgrade the system to SP3 but I am reluctant to take the plunge with such an "alive"... error
  As you may have already guessed, the system is running XP SP2.

  Thanks in advance,

  Concerning

  Yes, I am facing the same problem too. The error message says "an unexpected error has occurred." This problem started out with me a few weeks back and I was under the assumption that it was due to a virus attack. But even after a thorough cleaning session problem continues to exist.

  The problem - as mentioned above by the Bell, we can neither open the properties of a connection (i.e. Dial-up/LAN/WLAN), or remove or add a new connection. If you try to open the connection properties, all you get is the message "an unexpected error has occurred" and if you try to delete or add a connection - the system does not respond!

  Surely, this link worked for me. I hope it works for you Bell. Check it out.

  http://wdbuc.com/blog/2010/02/03/an-unexpected-error-occurred-when-you-right-click-on-a-network-connection-in-Windows-XP/

• MacBook can not access 1300 HP connected to my local network, help?

  I have a HP LaserJet 1300 connected via a USB hub to a Macintosh G5 tower which is connected by Ethernet to my Telus Optik V1000H Actiontec modem/router. I read (I think on this forum) that some people have kept the modem Gateway 2 son they used before the upgrade of their service internet of Telus Optik and plugged into the router/modem Actiontec V1000H because he has better wireless capabilities. I did too, but now I don't know what modem/router my MacBook can access my network through now (if this is important).

  My new MacBook Pro running OS 10.8.2 accessing my wireless network but cannot access the HP LaserJet 1300. I downloaded and installed the v.2.11 driver of HP on the new MacBook, but when I try to set up the HP LaserJet 1300, I get the error message "Unable to download the software from the server at this time." The MacBook doesn't seem to know that I have already installed the printer driver v.2.11 on it.

  I tried to provide much information as possible here, but the line the bottom is I realized that my new MacBook Pro would be able to print to my HP LaserJet 1300 while the printer is connected to my network... but it can't. Can someone help me? I can't really afford a new printer.

  BTW - after reading some of the messages, I realize I can't have fax capability via my network, but is not serious. I've never used fax anyway.

  I'd appreciate it if someone could help me with some advice or point me to another conversation that could help me. Thank you!

  Hi, I am answering my own question so I can mark it as resolved. I continued to read and try different things, and finally (kind of by chance) I solved my problem. I'm not entirely sure how I did it, but I'll try to explain in case someone else is having similar problems.

  I downloaded the driver for printer HP 1300 (v.2.11) manually at least twice. I got it on the MacBook Pro, but the computer doesn't seem to be able to access it when I had not the 1300 HP directly connected via USB. It was confusing to me, especially when all the literature said to do a software update, if I was in trouble by doing the work of the printer.

  When I went to my printer preferences and tried to set up the HP 1300 with the printer not connected not directly to the MacBook Pro, it came as a printer, but I got a message saying that I couldn't download the software needed at this time there. I left this printer icon on my list of printers. (I knew that I already had the software but couldn't get the printer preferences to realize it is there).

  Then, I connected the HP 1300 directly on the MacBook via USB and the process repeated. This time a HP LaserJet 1300 @ my network was created in my list of printer and print driver was on the MacBook Pro. I chose the HP LaserJet 1300 @ my network version as my default printer. I have connected the printer to my network and was able to print wireless from the MacBook.

  I'll just let the other HP LaserJet 1300 icon on my list of printers in the case removing a problem. I don't know if I need it or not.

  Sorry if my explanation is poor. It would be a miracle if it helped anyone. I'm not very good in this stuff. I got lucky!

• I have my laptop can't detect a wireless adapter or access point. It shows that the network connection is excellent but I can't always connect to the internet.

  I have my laptop can't detect a wireless adapter or access point. It shows that the network connection is excellent but I can't always connect to the internet. It happened suddenly and with no warning or cause. I tried to turn off the modem for 10 seconds and turning it back on, but I still had the same problem. What should I do? Help, please.

  Hello

  Maybe this can help, http://www.ezlan.net/wireless.html

  Jack-MVP Windows Networking. WWW.EZLAN.NET

• No Internet access, the 'Connect to the Local network' and 'Wireless network connection' are "Local only".

  I'm portable computer maintenance of the customer, a Toshiba Satellite L305-S5885, under Vista Home Premium x 86 SP2, with infections by malicious software and internet connection problems. I have managed to get rid of all of its 251 infections and I am now addressing the connectivity problem. I'm unable to achieve on its ethernet or a wireless connection to Internet. The two network status of connections 'Unidentified network', and also ' access: Local only ' all other machines hooked up to my router via CAT5e and some via 802.11 g/n, have excellent speeds with internet connectivity, so I know that the problem is limited to his machine. I tried the following:

  Deactivation and reactivation of these two connections: FAIL.

  "Diagnose and repair" on the two connections: FAIL.

  Under dynamic I.P. type to static/static to the dynamic: FAIL.

  Uninstalled all network via Device Manager devices, then restart: FAIL.

  Manually uninstalled all the drivers and utility and installed the latest versions: FAIL

  The command ipconfig/all text follows:

  ----------------------------------------------
  Microsoft Windows [Version 6.0.6002]
  Copyright (c) 2006 Microsoft Corporation. All rights reserved.

  C:\Users\Brooklyn's>ipconfig/all

  Windows IP configuration

  Name of the host...: Brooklyns-PC
  Primary Dns suffix...:
  Node... type: broadcast
  Active... IP routing: No.
  Active... proxy WINS: No.

  Wireless network connection Wireless LAN adapter:

  The connection-specific DNS suffix. :
  ... Description: Intel (r) Wireless WiFi Link 4965AGN
  Physical address.... : 00-21-5C-31-87-95
  DHCP active...: Yes
  Autoconfiguration enabled...: Yes
  Autoconfiguration IPv4 address. . : 169.254.174.235 (Preferred)
  ... Subnet mask: 255.255.0.0.
  ... Default gateway. :
  NetBIOS over TCP/IP...: enabled

  Ethernet connection to the Local network card:

  The connection-specific DNS suffix. :
  Description...: Realtek RTL8102E Family PCI - E Fast Ethern
  and NIC (NDIS 6.0)
  Physical address.... : 00-1E-33-4E-2E-F7
  DHCP active...: Yes
  Autoconfiguration enabled...: Yes
  Autoconfiguration IPv4 address. . : 169.254.74.29 (Preferred)
  ... Subnet mask: 255.255.0.0.
  ... Default gateway. :
  NetBIOS over TCP/IP...: enabled

  Card tunnel Local Area Connection * 6:

  State of the media...: Media disconnected
  The connection-specific DNS suffix. :
  ... Description: isatap. {C41651CC-0B3D-411D-8187-745214 C 69}
  B4B}
  Physical address.... : 00-00-00-00-00-00-00-E0
  DHCP active...: No.
  Autoconfiguration enabled...: Yes

  Card tunnel Local Area Connection * 11:

  State of the media...: Media disconnected
  The connection-specific DNS suffix. :
  ... Description: isatap. {816357D 3-D 8-494C-AA09-F622AE861 44}
  0FA}
  Physical address.... : 00-00-00-00-00-00-00-E0
  DHCP active...: No.
  Autoconfiguration enabled...: Yes

  Card tunnel Local Area Connection * 14:

  State of the media...: Media disconnected
  The connection-specific DNS suffix. :
  ... Description: Teredo Tunneling Pseudo-Interface
  Physical address.... : 02-00-54-55-4E-01
  DHCP active...: No.
  Autoconfiguration enabled...: Yes

  C:\Users\Brooklyn's >
  --------------------------------------------------

  Guys, I'm really hitting my head against the wall on this one, and I would be VERY happy for any help through this. Thank you!

  I thought about it, there was a corrupted installation of Norton 360, the origin of the problem. I've used the Norton removal tool and voila! Internet! Thank you.

• I can't access the itunes store. It telling me that my network connection has timed out or my network settings are not correct.

  Original title: problems with itunes

  I have recently purchsed an ipod and downloaded the itunes program.  Everything seems to work fine except or the fact that I can not access the itunes store, so have created new problems.  It telling me that my network connection has timed out or my network settings are not correct.  What settings should I have on, how can I make this work?

  Hello
  
  The reason for not being able to connect to the iTunes store may be due to the "hosts file" blocking the iTunes Store, or it can also be caused by security software, most likely, it might be Norton Firewall.
  Step 1:
  
  
  Note: Please make sure that you enable the antivirus/firewall software after the test to keep your computer protected.
  
  http://Windows.Microsoft.com/en-us/Windows7/turn-Windows-Firewall-on-or-off 
  http://Windows.Microsoft.com/en-us/Windows7/disable-antivirus-software
  Step 2:
  
  
  
  
  See the link below for more details:
   
  Unable to connect to the iTunes Store
  http://support.Apple.com/kb/TS1368#win24
  
  Follow the steps in troubleshooting mentioned in the above article. If the steps listed in the article do not resolve the problem, contact the Support Apple technique.
  http://www.Apple.com/support/
  http://www.Apple.com/contact/
  http://discussions.Apple.com/category.jspa?categoryID=149

  Can run the fixit tool mentioned in the link below:
  http://support.Microsoft.com/kb/972034/en-us you can try to disable the firewall completely or include an exception for the iTunes application in the firewall and check for the issue.
  Thanks and greetings
  Umesh P - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.
  [If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message.] [Marking a post as answer, or relatively useful, you help others find the answer more quickly.]

• My network connection shows no internet access, but I can access the internet

  Hardware: Dell XPS 8300

  OS: Windows 7 family

  System type: 64-Bit
  In the network and sharing Center, it is show the connection between the network of Multi and the Internet has an 'X', but I have full internet access.
  Is there a way to fix this?

  Hello

  I understand that you are able to connect to the internet when your computer showing no network connection.

  1. did you of recent changes to the computer?

  I would suggest trying the following instructions and check if it helps.

  Method 1: update the network driver.

  Steps to update of network driver:

  1. click on the Start button.
  2. in the search box type devmgmt.msc, and then press ENTER.
  3. Select the network card device and right click on it
  4. now, select Properties.
  5. in the Properties window, on the driver tab, click Update driver.
  6. After installing the updates, restart the computer.

  For more information visit: http://windows.microsoft.com/en-us/windows7/Update-a-driver-for-hardware-that-isn ' t-work properly

  Method 2:

  Temporarily disable the Antivirus and firewall

  Enable or disable Windows Firewall

  http://Windows.Microsoft.com/en-us/Windows7/turn-Windows-Firewall-on-or-off

  Important note: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you need to disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network, while your antivirus software is disabled, your computer is vulnerable to attacks.

  Hope this information helps. Answer the post with an up-to-date issue report to help you further.

• Cisco ASA 8.4 (3) remote access VPN - client connects but cannot access inside the network

  I have problems to access the resources within the network when connecting with the Cisco VPN client for a version of 8.4 (3) operation of the IOS Cisco ASA 5510. I tried all new NAT 8.4 orders but cannot access the network interior. I can see traffic in newspapers when ping. I can only assume I have NAT evil or it's because the inside interface of the ASA is on the 24th of the same subnet as the network interior? Please see config below, any suggestion would be appreciated. I configured a VPN site to another in this same 5510 and it works well

  Thank you

  interface Ethernet0/0

  Speed 100

  full duplex

  nameif outside

  security-level 0

  IP x.x.x.x 255.255.255.240

  !

  interface Ethernet0/1

  Speed 100

  full duplex

  nameif inside

  security-level 100

  IP 10.88.10.254 255.255.255.0

  !

  interface Management0/0

  Shutdown

  nameif management

  security-level 0

  no ip address

  !

  permit same-security-traffic inter-interface

  permit same-security-traffic intra-interface

  network of the PAT_to_Outside_ClassA object

  10.88.0.0 subnet 255.255.0.0

  network of the PAT_to_Outside_ClassB object

  subnet 172.16.0.0 255.240.0.0

  network of the PAT_to_Outside_ClassC object

  Subnet 192.168.0.0 255.255.240.0

  network of the LocalNetwork object

  10.88.0.0 subnet 255.255.0.0

  network of the RemoteNetwork1 object

  Subnet 192.168.0.0 255.255.0.0

  network of the RemoteNetwork2 object

  172.16.10.0 subnet 255.255.255.0

  network of the RemoteNetwork3 object

  10.86.0.0 subnet 255.255.0.0

  network of the RemoteNetwork4 object

  10.250.1.0 subnet 255.255.255.0

  network of the NatExempt object

  10.88.10.0 subnet 255.255.255.0

  the Site_to_SiteVPN1 object-group network

  object-network 192.168.4.0 255.255.254.0

  object-network 172.16.10.0 255.255.255.0

  object-network 10.0.0.0 255.0.0.0

  outside_access_in deny ip extended access list a whole

  inside_access_in of access allowed any ip an extended list

  11 extended access-list allow ip 10.250.1.0 255.255.255.0 any

  outside_1_cryptomap to access extended list ip 10.88.0.0 255.255.0.0 allow object-group Site_to_SiteVPN1

  mask 10.250.1.1 - 10.250.1.254 255.255.255.0 IP local pool Admin_Pool

  NAT static NatExempt NatExempt of the source (indoor, outdoor)

  NAT (inside, outside) static source any any static destination RemoteNetwork4 RemoteNetwork4-route search

  NAT static LocalNetwork LocalNetwork destination (indoor, outdoor) static source RemoteNetwork1 RemoteNetwork1

  NAT static LocalNetwork LocalNetwork destination (indoor, outdoor) static source RemoteNetwork2 RemoteNetwork2

  NAT static LocalNetwork LocalNetwork destination (indoor, outdoor) static source RemoteNetwork3 RemoteNetwork3

  NAT (inside, outside) static source LocalNetwork LocalNetwork static destination RemoteNetwork4 RemoteNetwork4-route search

  !

  network of the PAT_to_Outside_ClassA object

  NAT dynamic interface (indoor, outdoor)

  network of the PAT_to_Outside_ClassB object

  NAT dynamic interface (indoor, outdoor)

  network of the PAT_to_Outside_ClassC object

  NAT dynamic interface (indoor, outdoor)

  Access-group outside_access_in in interface outside

  inside_access_in access to the interface inside group

  Route outside 0.0.0.0 0.0.0.0 x.x.x.x 1

  dynamic-access-policy-registration DfltAccessPolicy

  Sysopt connection timewait

  Service resetoutside

  Crypto ipsec transform-set ikev1 ESP-AES-256-MD5 esp-aes-256 esp-md5-hmac

  Crypto ipsec transform-set ikev1 ESP-AES-192-MD5 esp-aes-192 esp-md5-hmac

  Crypto ipsec transform-set ikev1 ESP-AES-192-SHA esp-aes-192 esp-sha-hmac

  Crypto ipsec transform-set ikev1 ESP-AES-128-MD5-esp - aes esp-md5-hmac

  Crypto ipsec transform-set esp-ikev1 esp-md5-hmac bh-series

  Crypto ipsec transform-set ikev1 esp ESP-DES-MD5-esp-md5-hmac

  Crypto ipsec transform-set ikev1 ESP-3DES-MD5-esp-3des esp-md5-hmac

  Crypto ipsec transform-set ikev1 ESP-DES-SHA esp - esp-sha-hmac

  Crypto ipsec transform-set ikev1 ESP-AES-128-SHA aes - esp esp-sha-hmac

  Crypto ipsec transform-set ikev1 ESP-AES-256-SHA esp-aes-256 esp-sha-hmac

  Crypto ipsec transform-set ikev1 SHA-ESP-3DES esp-3des esp-sha-hmac

  Crypto-map dynamic dynmap 10 set pfs

  Crypto-map dynamic dynmap 10 set transform-set bh - set ikev1

  life together - the association of security crypto dynamic-map dynmap 10 28800 seconds

  Crypto-map dynamic dynmap 10 kilobytes of life together - the association of safety 4608000

  Crypto-map dynamic dynmap 10 the value reverse-road

  card crypto mymap 1 match address outside_1_cryptomap

  card crypto mymap 1 set counterpart x.x.x.x

  card crypto mymap 1 set transform-set ESP-AES-256-SHA ikev1

  card crypto mymap 86400 seconds, 1 lifetime of security association set

  map mymap 1 set security-association life crypto kilobytes 4608000

  map mymap 100-isakmp ipsec crypto dynamic dynmap

  mymap outside crypto map interface

  crypto isakmp identity address

  Crypto isakmp nat-traversal 30

  Crypto ikev1 allow outside

  IKEv1 crypto ipsec-over-tcp port 10000

  IKEv1 crypto policy 5

  preshared authentication

  3des encryption

  sha hash

  Group 2

  life 86400

  IKEv1 crypto policy 10

  preshared authentication

  3des encryption

  sha hash

  Group 1

  life 86400

  IKEv1 crypto policy 50

  preshared authentication

  the Encryption

  md5 hash

  Group 2

  life 86400

  IKEv1 crypto policy 60

  preshared authentication

  aes-256 encryption

  sha hash

  Group 2

  life 86400

  IKEv1 crypto policy 70

  preshared authentication

  aes-256 encryption

  sha hash

  Group 1

  life 86400

  IKEv1 crypto policy 90

  preshared authentication

  aes encryption

  sha hash

  Group 2

  life 86400

  Telnet timeout 5

  Console timeout 0

  management-access inside

  a basic threat threat detection

  Statistics-list of access threat detection

  no statistical threat detection tcp-interception

  WebVPN

  internal BACKDOORVPN group policy

  BACKDOORVPN group policy attributes

  value of VPN-filter 11

  Ikev1 VPN-tunnel-Protocol

  Split-tunnel-policy tunnelall

  BH.UK value by default-field

  type tunnel-group BACKDOORVPN remote access

  attributes global-tunnel-group BACKDOORVPN

  address pool Admin_Pool

  Group Policy - by default-BACKDOORVPN

  IPSec-attributes tunnel-group BACKDOORVPN

  IKEv1 pre-shared-key *.

  tunnel-group x.x.x.x type ipsec-l2l

  tunnel-group ipsec-attributes x.x.x.x

  IKEv1 pre-shared-key *.

  !

  class-map inspection_default

  match default-inspection-traffic

  !

  !

  type of policy-card inspect dns preset_dns_map

  parameters

  maximum message length automatic of customer

  message-length maximum 512

  Policy-map global_policy

  class inspection_default

  inspect the preset_dns_map dns

  inspect the ftp

  inspect h323 h225

  inspect the h323 ras

  inspect the rsh

  inspect the rtsp

  inspect esmtp

  inspect sqlnet

  inspect the skinny

  inspect sunrpc

  inspect xdmcp

  inspect the sip

  inspect the netbios

  inspect the tftp

  Review the ip options

  !

  global service-policy global_policy

  Excellent.

  Evaluate the useful ticket.

  Thank you

  Rizwan James

• I can't access my windows store error we could not connect to the Bank. This could have happened due to a server problem or network connection has expired. »

  Original title: I need help please.

  I cannot access my store of windows and can't update all the windows applications not to mention that movie maker and photo gallery witch don't need to be updated. And because I can't access windows store I can't windows 8.1 update for my laptop. When I click on the app store window at startup it loads for a while and what he said to me, 'we could not connect to the Bank. This could have happened due to a server problem or network connection has expired. Please wait a few minutes and try again. "I check my internet and went into my settings to find something wrong with my connection, but I found nothing. So I did a few virus scans and found some malware on my computer. Then I took all the malware from my computer and still could not get windows store to open. I tried to download the updates to my computer and it wouldn't let me. How can I get my store windows to work and get my computer up to date? Help, please.

  http://Windows.Microsoft.com/en-us/Windows-8/what-troubleshoot-problems-app

  Read the link above and run the Troubleshooter "App."

• I am trying to download revisions and I get this notice: access using your AdobeID has expired. Check your network connection and try again.

  I am trying to download revisions and I get this notice: access using your AdobeID has expired. Check your network connection and try again.

  Hello

  Please try the suggestions in the link below one by one and I'm sure that you will be able to solve the problem.

  I can't Adobe Business Catalyst. When I publish my site to my testing with Adobe Business Catalyst site, I get a message that I was out. What is going on?

  Kind regards

  Vivek

• # To access Internet changes with each network connection

  Sometimes, I get a popup asking where is my network location.  Most often my access Internet says network 5 or 7 network, etc.  I cannot get Internet access via network 3.  This just started happening after I upgraded my Iolo System Mechanic Version 14.5.  I uninstalled from this program, but the network problem.  Is there a way I can apply 3 network to my Internet access, so it won't change.  To reach this network 3, I have to unplug my modem and then plug it back again.  I have Windows 7 Home Premium 64-bit.  Thanks for any help!

  I searched the Internet & found a good program that totally solved my problem.  I found this program network card to the: http://www.freewarefiles.com/NetAdapter-Repair-All-In-One_program_101201.html

  Thanks for trying to help me, but this problem is solved now.  However, I still have a device of USB mass storage off that I was unable to trouble & I don't know if I need to worry about this or not?

  Thanks again!