Acer Aspire R7 cannot start when taken battery

Similar Questions

• L50 - B satellite will not start when the battery is completely discharged

  Hello

  My Toshiba L50 - B won't start when the battery is fully drained but connected to the power outlet.
  I try to work most of the time on the battery to keep the battery in good shape, but when I forgot to turn off the battery drains and the system will not start when I plug in the adapter.

  The battery charge indicator is orange light as it should. Only when the battery is fully charged to 100%, it will run at startup and function normally after that. I tried to turn on the laptop several times during the charge cycle, but only when the charge indicator changes from yellow to white it starts. Tested for 2 bodies.

  My old Toshiba always immediately turned on when I plugged the adapter even when the battery has been completely drained. Am I missing a setting somewhere?

  Thanks for responding... I hope well :-)

  Toshiba L50 - B
  Windows 8.1
  Any standard/original setting since I only acquired this laptop a month ago.

  The laptop should light up if the power adapter is plugged in and power the laptop corectly any if the battery is empty or during charge.

  Please check the version of the BIOS that is available on your mobile phone and compare with the BIOS available on the page of the Toshiba UE driver
  Maybe you need to update the BIOS, but to be honest, the history seems really odd to me and I m afraid that there could be some power supply electronic problem

  So in the worst case, the laptop must be checked by authorized service provider.

• My dv6 - 3013cl starts when the battery is in

  My dv6 starts when the battery is in. I have to remove the battery and then start. The battery can't hold a charge, is empty. Is someone experienced similar problem? Thank you

  Hello hpdv579,

  Take a look at this document for battery/power problems.  Looks like you already have a diagnosis of your own problem.

  Good luck!

• Acer aspire screen shows nothing when I turn it on

  When I turn on my computer the screen shows nothing except some clear blue... before this happened I was check some flash drive and check out what they had and remove them safely, but on the 3 drive flash the screen started showing the random colors at all goes horizontal like a rainbow... .then I had worries and immediately shut down the computer

  Acer aspire 5742z

  window 7

  

  Hello

  You have the same problem with an external monitor or LCD TV using VGA or HDMI port?

  [Fn] + [F5] - display toggle: switches display output between the screen display, external display (if connected) and both.

• Acer aspier L5100 cannot start windows

  Hi, my Acer Aspire L5100 SNID [under the direction of privacy] now cannot start windows.

  Blue screen, status of the Boot Manager Oxc000000f

  required unit is not available.

  I don't have the drive to victory, what to do now?

  Advice from someone...

  probably corrupted file BCD.

  What is your operating system?

• How can I get my acer aspire 5735 to recognize a new battery, it is showing 'no battery detected.

  As above, computer laptop battery not recognize

  Hello

  Thanks for posting the request in the Microsoft community!
  I understand that the laptop does not recognize the battery on the computer. Let us try the suggestions to solve the problem.

  Method 1:
  You can view the link troubleshooting suggestions:
  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-battery-problems

  Method 2:
  You can also contact the manufacturer of your computer to update the BIOS (Basic Input Output System) and drivers from the chipset.

  Note: Changing the BIOS / chipset can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the configuration of the BIOS/chipset can be solved. Changes to settings are at your own risk.

  Hope the helps of information. Please post the result and let us know.

• Tecra W50 - cannot start when installing the second hard drive (caddy).

  Hi all
  I have a Tecra W50 PT640A 04103NN1.
  When a second hard drive is installed in the Bay of DVD player cell phone will try to boot from the drive bay, not the internal drive
  This second drive has no operating system installed and so the fails to start.

  If I hit F12 at startup and select HARD drive, while the machine starts correctly. That is starts on the main hard drive.
  Change the order of boot in the BIOS makes all the difference; He will always try to boot from the second drive bay drive first.

  All known A it works correctly?

  Thanks in advance!

  Hi Doppelfrog,
  I had the same problem with my W50, got my HDD caddy a few days ago.
  You have a bit of luck to fix this problem?
  I believe that the Bios for this laptop is not developed to serve both drives (like the computer I had that one drive Bay) and it is not possible to prioritize the witch THAT HDD should start first...

  Kind regards
  Marcin

• Satellite Pro A120 cannot start when the printer is connected

  Hi I have a brand new Toshiba Satellite Pro A120 but I'm having a very strange problem.

  I installed my printer - Epson Stylus Photo R300, but now the laptop will not start if the printer is on. When I turn it on the Toshiba screen comes ok, then the Windows XP screen comes with the black background when the blue bar to cross to load Windows but its all disappear and the laptop just hangs and will not!

  However, if you turn the printer off and turn the laptop it starts up fine!

  Its really the printer which is the cause as its only when I turned it on.

  It's never caused this problem with my old PC using Windows XP too.

  Any help with a resolution would be greatly appreicated.

  Thank you

  Adam.

  How to disconnect the printer during the boot process? ;)

• Portege M500 cannot start when the USB ports are loaded

  We have a M500 that recently seems to be affected by start-up problems when the USB ports are loaded with things like KB and Wireless Mouse USB external adapter.

  When these ports are occupied at the start, all the usual tools seem do not load and the associated icons do not appear in the toolbar at the bottom of the screen. The machine in question XP Professional and has 2 GB of RAM. The machine software is generally updated. Machine seems to start normally when the USB ports are empty.

  Once completed a successful boot USB ports can be occupied and the machine will then seem to operate normally.

  Any thoughts?

  Thank you.

  Hello!

  In your case, I would do a BIOS update and also the chipset driver.
  The two you can find on the Toshiba site. I m not sure but I think you have a model for Canada:
  http://www.Toshiba.ca

  Have you tested the devices USB on another computer laptop or PC? Maybe the problem is the keyboard and/or the mouse and not the laptop.

  Good bye

• Satellite 1800-100 - cannot start when the cable is plugged

  Hello!
  My Satellite 1800-100 now only lights up when the power cable is plugged.

  It allows me to recharge the battery well when the laptop is turned off. And if I can use it only on the power of the battery which is not used for a long time - about half an hour just as much.
  What do you think is the problem? The battery or the AC/transformer cable?

  Thank you for your help.
  Kind regards
  Irina

  I m not sure but I think it is a problem of the motherboard.
  I had the same problem 4 years or more (I dunno m) on another laptop. The repairman replaced the motherboard and the problem was solved.

  So you can look on eBay for a second hand motherboard for Exchange it.

• Acer aspire V5-551 starts.

  I see the hard drive in the Bios, but at the start it gives: no boot device.

  Also putting a DVD in the drive it would recognize it.

  How can I solve this?

  have you changed anything on windows or the BIOS before having this problem?

  If it isn't

  First try to check if ALT + F10 at startup take you to recovery 8.x windows and you can join the command-line from there:
  Troubleshooting-advanced options - command prompt (if it works, go to point 4, if not point 1)

  1. create an installation media Windows 8.1 of vanilla from this link:
  http://Windows.Microsoft.com/en-us/Windows-8/create-reset-refresh-media

  2. Once you start using the disk installation of Windows on the Windows 8.x installation window, click on repair your computer.

  3. click on troubleshooting and advanced options. First thing you can try is the auto repair.

  4. If this does not help, and then select command prompt. Enter the following commands to four in the command prompt.
  Bootrec /fixmbr
  Bootrec /fixboot
  Bootrec /scanos
  Bootrec /rebuildbcd
  Once the order is complete, restart the computer.

• Cannot start on battery.

  Hi, my S10e doesn't start when the battery is installed, if I only run on external power it boots fine. I bought a new battery and the problem is always the same. This is a problem not being able to work on the road. Please let me know if any of you have any ideas.

  Flemming

  Hello, I speak little English, so I´ll try to be more explicit I can be, try to upgrade the BIOS, since the page lenovo´s there are options to request the correct BIOS, fill it with information from your PC. Salu2

• Acer aspire V5 571 P - stop with power cable removed

  Acer aspire V5 571 P - when cell phone fully charged and power cable removed from the laptop shuts... Help?  Thank you.

  Looks like there may be a problem with the internal battery. Battery reset press and hold the button for 4 seconds. Then, charge the battery and see if it works when unplug you the unit. If it is not the case, contact technical support to set up the repair.

• Acer Aspire switch 11 release Date

  I did the thing of PC selector on the microsoft windows site and it came with the Acer Aspire switch 11. However, when I click it, it says that it is coming soon. When it comes out? How much will it cost when it does not come out? Perhaps someone from Microsoft can respond to this...

  EDIT: I found this... he says it will be available in October, but its already October... So still need help.

  EDIT: also found this. It's going to be an acer aspire switch 12? When that comes out? help please

  P.S. Here is a screenshot.

  Hello

  Thanks for the reply and I apologize for the delay.

  Acer Aspire switch 11 is available now and for more details check out the Acer store from the link below:

  http://us.Acer.com/AC/en/us/content/home#_ga=1.94913500.1125643942.1417259919

  do not hesitate to return if you still face the question, we will be happy to help you.

• Cannot start Acer aspire V3 - 571G "scan and repair drive (E): 27%.

  Hello! I have an Acer aspire V3 - 571G. But I have a problem now, when I boot, the screen with the Acer logo appears, with the message: "Analysis and repair Drive (E): 27% Complete" and it never moves from 27 percent. So I unplugged the computer sometimes and sometimes a message asking me to restore to an earlier version. Once I tried to restore, a screen with the Acer logo appears. Before I restarted the computer and had this problem, I downloaded a scanning software from disk on the Ookla Speedtest site, but since he cannot solve all the problems, I downloaded another similar software by AVG Netherlands BV and fixed all the problems. Then they said that I needed to fix something in the Device Manager (3 of my miniports were not work) so I looked on the net for a solution, that I followed and uninstalled all 3 miniports. After the AVG scan, it asked me to restart, which I did later and could not get more in Windows. Any help would be appreciated. Thank you.

  I finally solved this problem! After starting, press F9, and then click "restore." Then you will need to be patient and start the computer normally will be! Here it helps other people with this problem too.