Adapters of tunnel gone wild on Windows 7

Similar Questions

• Tunnel adapter connections to the LAN gone wild on Windows 7

  On my windows machine 7, ipconfig shows many tunnel adapters (some listed below).

  I disabled ipv6, netsh cmds attempted to disable the router isatap etc and restarted... but it does not help.

  Is there a reliable way to eliminate these tunnel adapters appears in ipconfig?

  Thank you

  Parag

  Card tunnel Local Area Connection * 50:

  State of the media...: Media disconnected
  The connection-specific DNS suffix. :
  ... Description: 42 Microsoft 6to4 card #.
  Physical address.... : 00-00-00-00-00-00-00-E0
  DHCP active...: No.
  Autoconfiguration enabled...: Yes

  Card tunnel Local Area Connection * 51:

  State of the media...: Media disconnected
  The connection-specific DNS suffix. :
  ... Description: 43 Microsoft 6to4 card #.
  Physical address.... : 00-00-00-00-00-00-00-E0
  DHCP active...: No.
  Autoconfiguration enabled...: Yes

  Card tunnel Local Area Connection * 52:

  State of the media...: Media disconnected
  The connection-specific DNS suffix. :
  ... Description: 44 Microsoft 6to4 card #.
  Physical address.... : 00-00-00-00-00-00-00-E0
  DHCP active...: No.
  Autoconfiguration enabled...: Yes

  Card tunnel Local Area Connection * 53:

  State of the media...: Media disconnected
  The connection-specific DNS suffix. :
  ... Description: 45 Microsoft 6to4 card #.
  Physical address.... : 00-00-00-00-00-00-00-E0
  DHCP active...: No.
  Autoconfiguration enabled...: Yes

  Card tunnel Local Area Connection * 54:

  State of the media...: Media disconnected
  The connection-specific DNS suffix. :
  ... Description: 46 Microsoft 6to4 card #.
  Physical address.... : 00-00-00-00-00-00-00-E0
  DHCP active...: No.
  Autoconfiguration enabled...: Yes

  Hi Parag Blangy,

  . The computer is connected to the domain?

  I suggest that you follow the steps proposed by Nicholas Li from the link below:

  http://social.technet.Microsoft.com/forums/en-us/itprovistanetworking/thread/32b0c129-FA2D-431a-A275-4288c729605a

  Thank you, and in what concerns:
  Swathi B - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Teredo tunneling pseudo interface of windows 8 pro driver works do not error code (code 10).

  Please answer as soon as possible... That's what it shows... code (10)... I tried to update the driver... It shows that it is the best driver available and installed in my camera...

  OT: teredo tunneling pseudo interface driver Windows 8 pro does not not work... Please help (code 10)... I tried to update shows it is updated and the best driver is installed on my laptop

  Hi Shilratna,

  The Code 10 error code is generated when the Device Manager has not enough information or error that spread upwards by device drivers is not recognized by Device Manager. In addition, this error may occur if one of the pilots who needs the unit does not start. If multiple drivers are used by a particular device, it can be difficult to determine which failed.

  I suggest you try the steps from the following link:

  FIX: "this device cannot start" error Code 10 in the Device Manager in Windows
  http://support.Microsoft.com/kb/943104/en-us

  I hope this helps. Let us know if you have other problems with Windows in the future.

• 10 workstation: Windows 'probably remove' Gone Wild

  I'm using VMware Workstation 10.0.0 build-1295980 to host Microsoft Windows Server R2 2012.  Unfortunately, menu safely remove Windows lists several hardware devices that never appear when Windows is installed on a physical hardware.  Does anyone know how to remove these menu items so that may be displayed only legitimately removable (such as USB thumb drives)?

  Here is the safely remove icon that appears in the notification area of the Windows taskbar:

  

  Here is the menu of Windows Server 2012 R2 safely remove the runtime as a guest on VMware Workstation 10.0.0 build-1295980:

  

  Hi voidpand welcome to the VMware communities!

  You have found a feature!  Our machines support virtual virtual PCI/PCIe hot and warm addition / deletion, if these devices expected to actually be ejection.  The physical host you compare against obviously doesn't support hotplug PCI/PCIe.

  If you don't want the items appearing in the "remove" list without worrying, power off and snapshot of your virtual machine, and then try to open the file ".vmx" inside the directory of the virtual machine and add using your favorite text editor

  Devices.hotplug = "FALSE".

  the virtual machine configuration.  When you turn on it again once, these devices should more be removable hot.  I have no idea how Windows will change... it could get horribly confused about this unusual change of his 'mother'... so please don't forget to take a snapshot before you try this!

  See you soon,.

  --

  Darius

• G6-1c35dx gone after upgrade Windows network adapter Pavilion

  Hello - I tried to upgrade my laptop Win 7 Edition home premium to Win 7 Professional from a CD.  It wouldn't let me, so I did a full install. When windows finally came, I was unable to connect to the internet.  I did some research and found other similar issues. We had exactly a problem, but for some reason I can't access the url for its solution. Here's what I tried to use:

  SM Bus controller
  
  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-96948-1&cc=us&DLC=en&LC=en&...
  
  PCI Simple Communications controller
  
  It's either this one:
  
  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-97194-1&cc=us&DLC=en&LC=en&...
  
  or this one...
  
  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-97081-1&cc=us&DLC=en&LC=en&...
  
  Install this driver if you have not already done so.
  
  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-97190-1&cc=us&DLC=en&LC=en&...
  
  Ethernet controller:
  
  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-100084-1&cc=us&DLC=en&LC=en...
  
  Network controller:
  
  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-96646-1&cc=us&DLC=en&LC=en&...
  
  PCI device:
  
  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-100083-1&cc=us&DLC=en&LC=en...

  And here's my devices with problems & their equipment identification numbers:

  Ethernet controller
  PCI\VEN_10EC & DEV_8136 & SUBSYS_1695103C & REV_05
  
  Network controller
  PCI\VEN_10EC & DEV_8176 & SUBSYS_1629103C & REV_01
  
  PCI device
  PCI\VEN_10EC & DEV_5209 & SUBSYS_1695103C & REV_01
  
  PCI Simple Communications controller
  PCI\VEN_8086 & DEV_1C3A & SUBSYS_1695103C & REV_04
  
  SM Bus controller
  PCI\VEN_8086 & DEV_1C22 & SUBSYS_1695103C & REV_05

  Help, please!

  Hi Davis,.
  
  For the hardware IDs you mentioned,
  Download, save & install one by one each of the drivers below in ORDER, system reboot after each installation is performed:
  
  Intel chipset:
  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-96948-2&cc=us&DLC=en&LC=en&OS=4063&product=5182647&sw_lang=
  
  Intel Management Engine Interface:
  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-97194-2&cc=us&DLC=en&LC=en&OS=4063&product=5182647&sw_lang=
  
  Ethernet:
  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-100084-2&cc=us&DLC=en&LC=en&OS=4063&product=5182647&sw_lang=
  
  Network controller:
  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-96646-2&cc=us&DLC=en&LC=en&OS=4063&product=5182647&sw_lang=
  
  Card reader:
  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-100083-2&cc=us&DLC=en&LC=en&OS=4063&product=5182647&sw_lang=
  
  Restart, check.
  
  Source: http://h10025.www1.hp.com/ewfrf/wc/softwareCategory?os=4063&lc=en&cc=us&dlc=en&sw_lang=&product=5182647#N3675
  
  Concerning
  
  Visruth

• Where then-gon photos in Windows 7?

  I am reluctant to load Windows 7 because of the dozens of photos that I have in the Windows Photo Gallery since the program is not in Windows 7. Where wil my photos go?

  Your photos are not 'in' Windows Photo Gallery... it's simply a viewer.

  Photos are probably stored in your pictures folder. If you
  Right-click on a photo in the photo library and choose... "Open file location".
  You can find the folder that the file is saved in.

  It would be a great idea to save 'all' your photos and other
  personal files on removable media. CD, DVD, memory card.
  Flash drive, external hard drive, etc... before you put in your
  Operating system.

  If your version of the photo gallery has the possibility of returning to undo
  editing... copy you the pictures of the unreleased original
  images are stored in the following folder: (save those too)

  Vista system:
  C:\Users\\Appdata\Local\Microsoft\Windows Gallery\Original photos.

  XP system:
  C:\Documents and Settings\ > user name<\Local settings\application="" data\microsoft\windows="" photo="" gallery\original="">

  Regarding Windows 7... You can install Windows Live Photo Gallery:

  Windows Live Photo Gallery 2011
  http://explore.live.com/Windows-Live-Photo-Gallery
  (There are other applications included in the download...
  Uncheck the ones you do not want to install)

• Site to another tunnel not succeeded traffic Windows

  Have a problem with a static to the dynamic VPN from Site to Site between 2 ASA5505. Tunnel is in place and can test both ways isn't a problem, can also travel and web remote RDP. However, I can't browse the network or obtain any authentication DC pass.

  My VPN clients are all no this problem. I post the config of the remote site.

  The config may have got a bit messed up in attempts, please let me know if you see something, I'm leaning toward the ACL.

  Sho run
  : Saved
  :
  ASA 5,0000 Version 22
  !
  ASA-2 host name
  domain internal.monaco.com
  enable the encrypted password xxxxx
  encrypted passwd xxxx
  names of
  !
  interface Ethernet0/0
  Description external connection
  switchport access vlan 2
  !
  interface Ethernet0/1
  Description internal LAN
  !
  interface Ethernet0/2
  !
  interface Ethernet0/3
  !
  interface Ethernet0/4
  !
  interface Ethernet0/5
  !
  interface Ethernet0/6
  !
  interface Ethernet0/7
  !
  interface Vlan1
  nameif inside
  security-level 100
  IP 10.16.2.1 255.255.255.0
  !
  interface Vlan2
  nameif outside
  security-level 0
  IP address dhcp setroute
  !
  Group object BasicPortsUDP
  object-group network
  object-network 172.16.0.0 255.255.0.0
  object-group, internal network
  Local Group object
  Inside_in access-list - BEGIN Note: Out bound ACL (update: August 20, 2013).
  access-list Inside_in note--> Allow shared Internet use
  Inside_in list extended access permit tcp any any OutgoingTCP object-group
  Inside_in list of permitted udp access all all OutgoingUDP object-group
  Inside_in list extended access permit icmp any one
  Note Inside_in access - list--> explicit DENY ALL
  Inside_in deny ip extended access list a whole
  Inside_in access-list - END - note
  Note Inside_in access - list--> allow the VPN to hand traffic
  Inside_in list extended access permitted ip object-group main object-group internal
  Inside_in list extended access permitted group ip object-group main internal object

  moved here
  Outside_in access-list - BEGIN Note: ACL related (update: 15/12/2006).
  Outside_in list extended access permitted group ip object-group main internal object
  Note Outside_in access - list-> allow ICMP traffic
  Outside_in list extended access permit icmp any any echo response
  Outside_in list extended access allow all unreachable icmp
  Outside_in list extended access permit icmp any any traceroute
  Note Outside_in access - list-> explicit DENY ALL
  Outside_in deny ip extended access list a whole
  Outside_in access-list - END - note
  no_nat allowed extended access list main object-group Local ip object-group
  VPN_to_Main list extended access allowed object-group object-group main Local ip
  NAT allowed ip extended access list a whole
  pager lines 24

  Hi Brad,

  Since the issue is considered by speciifc traffic/application, could you please raise the plotter output on the two ASAs package (in the outbound direction) to check if the flow is correct for non-working traffic.

  Collect the following:

  detailed entry of Packet-trace

  Thank you

  Shakur

• BlackBerry Smartphones spell Gone Wild

  I did something - do not ask me what - and now all of a sudden my spell check function is stressing nearly every word (even those correctly spelled) and weird correction suggestions. The options for changing the spelling check settings are limited and have not solved the problem.

  Of course, I did this, but can I cancel it? If so, how?  Help!

  Did you change languages by chance?

• Function of Smartphones SMS blackBerry gone wild

  Hello

  Help me please. I got my 8220 again a few days ago on the o2 UK network.

  I have the mail function works very well and I'm happy with that however, my sms functions have been crazy and worsens, as days go by. When I get a text message, it says on the main screen, the icon in the upper left corner of the number of loans to read, but when I go to the sms screen it doesn't show messages. To be able to read them, I have to go to the display folder, select sms Inbox to read it and I then have to do the same thing again to fetch the second message.

  When I click on the sms option in the main menu screen is empty, but when I go to view the files and select each Inbox or send there all the previous posts, I then try to delete messages and it wont let me delete them and the screen then freeze.

  Messages appear all jumbled up, when they are the same person. It seems not now send messages and displays all messages I tried to send this afternoon as pending (a small red clock in the upper left corner of the screen of messages).

  Someone help me please as this is driving me crazy and I want to send again.

  Basically, I want to just show him the menu sms and messages as it would on a normal cell phone, that's what I was led to believe he would do when I got the phone.

  Thank you

  Hi and welcome to the forums!

  You go to messages options General options and separate the SMS and E-mail in the boxes.

  What did you ask?

  Thank you

  Don't forget to adjust your thread. Put the check mark in the green box containing your answer! Thank you

• Archives Gone Wild!  Or: what is a mandatory archive destination?

  We had a situation where our DBs were configured with log_archive_dest_1 set to a destination of local file system, and log_archive_dest_2 has been set to a standby dataguard. dest_2 has been delayed and the broker turned off due to some work of DR site.
  
  Everything was humming... until due to a miscommunication gross/misunderstanding, a DBA has added log_archive_dest_3, which has been specified like this:
  
  ALTER SYSTEM SET log_archive_dest_3 = ' LOCATION = / nas/database_name "SCOPE = BOTH;
  
  log_archive_dest_state_3 has already been fixed and the DB immediately began trying to archive in/nas/DBNAME, who was on the NAS. We have never designed for it, and worse still, similar orders were given in other databases on the same server that are all very busy. We have four production servers busy trying to archives on the NAS. Very quickly (30-45 minutes), archiving could not follow, again filled and databases stopped accepting transactions. I have no solid evidence (yet) that the NAS performance caused the problem, but certainly we have the sequence of events where each DB seized 30 to 45 minutes after the change of dest_3 was made (and he exhausted his recovery online).
  
  The DBs include three 10.1.0.4 a 10.2.0.4 9.2.0.8 and another on another server that had the same problem.
  
  In the post-mortem analysis, a question is asked. If things were defined as I mentioned, why was not considered dest_3 as OPTIONAL? What I saw in the papers a lot of contention inter-archiver with a single ARCn process on hold for another. Each DB has 10 archivers. log_archive_min_succeed_dest is set to 1 on all databases. I don't think that even dest_1 is MANDATORY, although I guess min_succeed could ensure.
  
  So here are my questions:
  
  (1) IF you say log_archive_min_succeed_dest = 1 and have two local destinations (not DataGuard), does oracle pick dest_1 that must succeed? Or should I say "as long as the two succeed?
  
  (2) I have a theory that each ARC began trying to write on the NAS and got a bottleneck. I see that they began to "create...". "but I saw no message 'done '. Therefore, the DB has failed to ARCs. What sounds plausible? I know that I would need a few data network / NAS who really make a strong case.
  
  (3) the default value is OPTIONAL for destinations, right? So why the DB would wait on the NAS? Or is the case he had simply run out of ARCs?

  Because you have multiple (too?) Archivers, each Redo Log was taken over by an other archiver and each archiver chose not to take DEST_3 as the target to copy to.

  It is more likely that with less archiveurs, DEST_1 would have been picked up. For example, with 2 archivers, if ARC1 chose to write SEQ 15363 to DEST_3, ARC2 could choose to write SEQ. 15364 DEST_1
  (but then again, you might say ' what needs to prevent ARC2 also choose to write to DEST_3 and blocked on this issue? ")

  Hemant K Collette

• Dreamweaver gone wild

  It keeps the crazy creation * files like Tmpyfildsak.cfm in my models. I get a message not defined in coldfusion. Whenever I have the problem of coldfusion. It creates a new file called tmpdifofd.cfm and says that has not happened in this file. He keeps creating instances of my original file and give them names crazy and says that the error has not been set. I want it to stop, HOW!

  Edit > Preferences > Preview in browser and uncheck the preview using temporary file

  --
  Ken Ford
  Adobe Community Expert
  Fordwebs, LLC
  http://www.fordwebs.com

  "numerical07" wrote in message news:[email protected]...
  > It keeps crazy creation * files like Tmpyfildsak.cfm in my models. I have
  > get a message not defined in coldfusion. Whenever I set the coldfusion
  > problem. It creates a new file called tmpdifofd.cfm and says that the changes
  > has not been done in this file. He keeps creating instances of my original file
  > and name them names crazy and says that the error has not been fixed. I want what he
  > stop, HOW!
  >

• Microsoft Teredo Tunneling adapter does not work on my Windows 7 and cannot start. The Plug and Play ID for the device is 12.

  Anyone can guide me please by reinstalling my Microsoft Teredo Tunneling adapter for my Windows 7 operating system?  I ran a diagnosis of the system and says it can not start correctly and has a hardware failure. The Plug and Play ID for the device is 12.  I have problems to install it.

  Hello

  Try these solutions:

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-networking/how-do-i-reinstall-Teredo-tunneling-win-7/10ff26a2-fc53-4CDE-AE4C-3cd35f15e2e2

  How do I reinstall Teredo

• NetGear wireless adapters and server operating systems

  All types of wireless adapters work with the operating system Windows Server R2 2012?

  I have to go to another provider. Thank you!

• the problem with the wi - fi does not work on windows 8.1

  Hello dear forum users (sorry for the English, use a translator)

  I have a laptop HP Pavilion dv6-7055er, 8.1 Windows 64-bit

  Card Broadcom WiFi 802.11b/g/n 1 x 1 4313GN worked on windows 7, but fails on windows 8.1. Tried to find the driver on the broadcom , but not found. Device Manager indicates that the problem with a PCI device. Specifies no problems with the Wi - Fi adapter.

  What could be the cause and how to fix it? Thank you!

  It seems that your WIFI adapter is not supported by Windows 8.1

  There are a few options available.

  The first and simplest is to purchase a USB wifi adapter to plug into one of the USB ports on the laptop. I have a dual ASUS USB-AC56 band that meets the 802.11ac specification.

  The second option will be to take a look at the installed optional wifi adapters to see if they have Windows 8.1 supports, buy one to replace the Broadcom card installed with.

  Ok. The two following adapters are compatible with your laptop and Windows 8.1. They have a BIOS support.

  The Qualcomm Atheros AR9485

  The Intel Centrino Advanced - N 6230 WLAN module

• Arabic Language Pack for Windows Vista Ultimate 32-bit

  Dear Sir/Madam

  There was a 'Arabic Language Pack' available on Windows Update for Windows Vista Ultimate 32 bit, but when I installed SP2 for 'Vista Ultimate' is now gone from the Windows Update Page, so where can I get it now?

  Thanks in advance
  Yours sincerely,
  Elsharif

  Assumed as replied, without other added messages