Advanced (Type 2503) USB Dock question...

Similar Questions

• Toshiba Dynadock U Universal USB docking Station

  I have a Toshiba Dynadock U Universal USB Docking Station (PA3927U-1PRP) that I have connected to my Dell XPS17 laptop via a port USB3. Everything works fine except for the Ethernet connection and the laptop does not seem to see. Under network and Internet > network connections the connection does not appear in the list, but the connected network of light at the back of the dock is flashing, indicating a connection at least to the dock.

  In addition, under Device Manager. Other devices, dynadock Ethernet is listed with a yellow exclamation point and says there is no driver installed. When you try to find the driver, it can be located anywhere.

  I returned a Targus USB3 docking due to the same issue and now think that this could be a Windows 7 problem.

  Any advice on troubleshooting?

  16/03/12: I called Dell support and they walked me through the uninstall of all the docking drivers, then relocation. everything works fine now.

  Hello

  1. it worked before?

  2 have. what stage you tried to find the driver?

  3. are you able to use other devices?

  4. have you tried in another computer?

  The yellow mark could be due to the possible corruption of the drivers.

  These steps can help you:

  Method 1:

   

  Update driver by following the steps in the below link:

   

  http://Windows.Microsoft.com/en-us/Windows-Vista/update-a-driver-for-hardware-that-isn ' t-work correctly

   

  Method 2:

   

  a. Click Start > type in devmgmt.msc in the search box, press enter > right click on the device and click on uninstall. And restart the computer.

  b. access the website http://www.csd.toshiba.com/cgi-bin/tais/support/jsp/home.jsp

  c. click on the download option and download the latest driver.

  I hope this helps.

• How to determine what type of USB port that I have on my computer?

  I need to know if my computer will not accept a disk that requires a port USB 3.

  How can I determine the type of USB ports on my computer?

  Thank you

  Yes... but you might encounter power problems if you try to use an external with a USB hub drive unless the hub or the external hard drive has its own power supply.

• Decrypt the files on an internal hard drive that is mounted using the USB docking station

  I encrypted a file in Windows 7. This internal hard drive failed after a few days due to some problems of device driver.

  Am able to access the internal hard drive using a USB docking station and eSata and ride on a different area of windows 7.
  I can't copy the encrypted content. It throws an access denied error.
  Need help to copy these files. How to decrypt the folder and copy the files?
  Thank you
  Robert

  Hi k,.

  Welcome to the Microsoft community!

  I suggest you for this post in the Forum of security Windows 7 for better assistance.

  http://social.technet.Microsoft.com/forums/en-us/w7itprosecurity/threads
   
   
  I hope this useful information!

• Captivate 5.5 prohibited for different types of a quiz question slides to work properly?

  Captivate 5.5 prohibited for different types of a quiz question slides to work properly?

  I have a quiz that includes multiple choice questions, multiple choice with several answers, sequencing, and short answer questions. I was told in an online conversation that I had to use a default template to Captivate with a type of question only for captivate slide works correctly. The Adobe representative remotely considering my record, and discovered that the quiz button is not connected to any action, even if I created it a slide of questionnaire.

  

  Online chat:

  Thank you for choosing Adobe. A representative will be with you shortly. Your estimated wait time is 4 minute (s), and 0 second (s) or more because there is 1 client (s) online in front of you.

  You are now chatting with 'Lea '.

  Leah: Hello. Welcome to Adobe Technical Support.

  Leah: I received your request. I would like to please a moment to check your account and review the details of your

  request.

  Leah: Please choose the option, the infinite attempts

  David Lee: Yes, I had endless attempts checked. It still does not work.

  Léa : Each question must have infinite attempts

  David Lee: Yes, I welcomed the infinite attempts in quiz preferences, as well as with respect to each question. This particular slide is a question multiple choice with multiple correct answers. The infinite button is checked. The slide informs the user to try again, but the back and the clear button do not work, the termination of the project and the user did not click the new button.

  Léa : I may have remote desktop connection help you?.

  David Lee: Yes, thank you. How do I facilitate this?

  Léa : http://my.adobeconnect.com/khyati/

  Léa : Enter as a guest

  David Lee: I'm in

  Léa : Share my screen

  Léa : Desktop

  Léa : Please show me what slide we discuss on

  David Lee: We discuss slide 18

  David Lee: The current slide

  Lea: I would like to see the result

  Léa : Tiffany is a Captivate model?

  David Lee: No, I did this. The other tab you see is called ClarkTemplate, but this isn't a model of captivate. I called model as is the format for the entire project.

  Léa : Unfortunately there is no action not implemented responses to check and also that is not a default captivate quiz, I can't support this.

  David Lee: Why is there no action on response to tick? It's a quiz slide

  Leah: The model of clark is not a default template of Captivate.

  David Lee: I'm supposed to use a default template of captivate?

  Leah: Yes if you want to

  David Lee: And it would work then?

  Léa : He could.

  David Lee: How to create a default template of captivate?

  Léa : They want a multiple response quiz?

  Léa : If so, please create a quiz, and you can create the quiz with the help of the help file.

  David Lee: Yes, but it should also include short answers and sequencing. Am I limited to a type of question in a quiz for captivate 5.5 working properly?

  Léa : Yes

  David Lee: Thank you for your time.

  Léa : Welcome

  Léa : I closed the meeting

  Léa : Please contact Adobe. Good bye.

  Friendly format for this question slide!  Very cool.

  One thing I want to suggest you check if you meet problems with question slides, but you have not accidentally deleted default captions that are on the slide when Captivate adds to your quiz.  For example if you have deleted or replaced the title of the question (the one that tells you that it is a true/false or multiple choice) or legends question text (the one that allows you to enter the question to which the user is supposed to reply), then you can expect to have strange problems arise.

  Usually, I suggest to users that they're trying to click the little eye icon on the timeline for the quiz question so that it hides all the objects on the slide.  This icon SHOULD NOT overshadow the default Captivate captions or buttons.  He must hide captions or the items that you added to the slide when it was inserted.  If you click on this icon and you see the title of the issue or question text captions disappear, then you are snookered and need to rebuild this quiz with a new question.  You can not re - insert these specialized legends once you've deleted.  They come with question slides.  Most users of Captivate are blissfully unaware that these legends of importance both for the proper functioning of the quiz.

  One last thing: some of your symptoms suggest that you have the Quiz settings > required options set too tight.  Make sure that the drop is set to optional for the highest degree of flexibility.

• Inateck USB 3.0 HD Dock questions - iMac, retina - 27 "(end of 2015)

  Whenever I have dock standard SATA 3/6 disks, they operate at USB 2.0 speeds.

  I have two drives WD Caviar one Blue (00Z8A0), green (00D6B1).

  Both are formatted correctly.

  What's not?

  The Inateck Dock model #: FD2002.

  If I were you, I'd ask Inatech, they claim that the device uses USB 3.0. Maybe you do not use a USB 3 cable, if you are using an older USB 2.0 cable that would be a simple 'why'.

  BTW, if you want the fastest speed then you should get a Thunderbolt box and connection to the casing via a cable Thunderbolt.

• USB docks/pass-through/techniques...?

  Does anyone know if Motorola (or any third-party company) has any plans to release a better dock for the Xoom, preferably one at least a USB port? I have a kind of doubt Motorola will be at this stage, but it would certainly many of us happy that I am sure!

  I would like to see me mind not so much, but when you use the USB host adapter/cable I can't configure my Xoom in my portfolio case correctly because the port is down and stop to rest in one of these positions correctly. So if anyone has found a solution which doesn't involve propping it against something or leave this dish? Thanks in advance for any idea!

  @kidroboto,

  I doubt we'll see any change to the docking station, bur it is a simple solution for this in the case of portfolio. When I use one of the ports on the Xoom while in the case, I simply turn the Xoom upside down (with the ports on the TOP) and the place he put the case (automatic rotation must be turned on).

  I also bought a pair of bent of cable USB OTG (host) and a HDMI cable right angle than the excellent work with the Xoom and are not as inclined to be broken (low profile). Besides the cables, I found a portable easel on Amazon that holds my Xoom (when not in the case of portfolio) and has plenty of clearance for these same right angle when facing with the ports down cables. Let me know if you are interested in one of these cables and I can give you the links.

  -Doc

• Type of USB cable for Laserjet CP1025 Color

  I just bought a printer Laserjet CP1025 colour of HP uk online store and I took it from the box.

  NOWHERE, I find a USB connection cable.

  How can I plug it into my laptop to make it work without the connection cable?

  What is the cable that is supposed to be?

  Can someone give me the exact type or a link to order the HP, or on amazon uk store?

  Thanks in advance!

  Hello

  To reduce costs, many printers have no USB cables inside their boxes. I think the USB cables are in boxes of printers for the only region in AP. You need a cable that is similar to:

  

  The rounded end is for your printer and the flat end is for your computer.

  Kind regards.

• 2503 power dock

  After talking with four people at Lenovo/IBM support, as well as to quite a bit of digging on my own, I was unable to increase the part number for the docking of 2503 advanced for my T500. The part number of the is42W4629 docking station. All I need is a spare for her power cord. Maybe someone in the forum here can better driving that I do as to where I can find this information.

  I knew that, even if it was a discontinued product, Lenovo/IBM would at least be able to tell me a part number so I could pick up that can be variable in the ether. Research on eBay, Amazon and Google have all turned up many instances of the docks sold jointly with the food, but not on its own initiative.

  I'd appreciate if someone else would be able to help me in this.

  The power cord is exactly the ordinary kind three pleaded the power cord used on many laptops.

• Portege R700: Speed Port Replicator HI + USB Vista questions

  Good afternoon

  I am having trouble with 4-5 new R500-1hd (311th short number), the number could be higher, but users could not have reported it.
  If the laptop is disconnected from the HI Speed Port Replicator 2, it off very well and the laptop can be used, but when the laptop is brought back it does not recognize the mouse or the keyboard. The device does not appear as an "unknown device" in Device Manager, but just does not at all appear.

  A new problem that has arisen is again when the machine is off station USB devices install\work not unless they are connected on port SATA\USB, once again the machine failed to detect at all. Even when devices are picked up, it may take in any case of 30-60 seconds before the work of the mouse and the keyboard.

  These are corporate images deployed through WDS and the problem is very intermittent.
  A reset is applied each time the device will be detected.

  I had a couple of flying machines and finished the stretch prior to the computer with Windows 7, computer image portable devices all work fine with or without the docking station and can be used instantly.

  Isn't anyone has an idea how I can fix this problem?

  Concerning

  Kris

  Hello

  As far as I know speed Port Replicator HI new supports the USB 3.0 standard.
  I found the USB driver on the European driver Toshiba for the USB 3.0 feature page.

  I recommend that you install this!

  Thanks for posting comments after trying that

• Portege 7220CTe he's - USB dock does not work properly

  I have a portege 7220, with Dock he's using windows 98se.
  I have 2 usb ports on the dock, one that I use for mouse, 2nd I use for hard disk USB, cards memory sticks etc. When I start with 2 installed, often they will not work. Installing after startup does not work either. MILADI repairman told me to bring pc + dock in because they think it's a hardware problem. But sometimes, the usb works with 2 installed users. Who can help me? BIOS (ACPI version 1.70, 29/09/00).

  Hi Buk

  Trust me on this path is not easy what's happening with your USB ports.
  Do you have similar problems if you use the USB ports on Portege itself?

  As you know the signal USB is just loop through and there may be a problem with the circuit of the port replicator.

  I really put t think you will be able to solve alone.

  Good luck!

• HP Officejet Pro 8500 A909a USB 3 questions about the configuration of the network - port USB3 problem

  Fujitsu Windows 7 laptop (all USB2)

  used the full software and installed a printer HP Officejet Pro 8500 A909a Series as a network printer.

  The printer installed fine and don't have USB connection

  All the software and scanning twain installed, so I was able to scan the copy etc.

  I could browse and choose my PC from the front panel of the printer

  However, it was Tuesday confirmed to a friend that their printer would work on a new laptop - bought the laptop

  Fujitsu - but more recent model with 3 USB ports

  I have install and then used the same FULL configured driver to be installed (V14)

  selected as a network printer and then, during the installation, I get an error hardware error USB and USB drivers

  All the USB works, that I've used - BUT the printer is networked and no USB used

  tried to download the driver and install it-exactly the same question

  SO I configure using the devices and printers 'add printer' network and installed

  I can print OK

  BUT no analysis facilities

  and on the façade - cannot see the new PC to scan to

  The only real difference, is that this PC has USB3 and only mine has USB2

  DO not know why on a network installation USB even when searching for

  It's a problem because Drivet package not has not been updated for USB3 - y at - it a patch?

  Thanks for any help / advice

  Hi etaf,.

  I guess the short answer is: Yes, the problem with the software and the 3.0 Port.

  The long answer with a possible work around is as follows: first of all, the software looks for minimum requirements. Because the software is older, he doesn't know what a 3.0 port. You are right when you say that it should work since you do not use the USB and use wireless instead, but this is not the case.

  There is something we can try, but I can't guarantee it will work. I thought first we could connect a USB cable and run the software made to force the software to see the USB port, but then the software wouldn't even get far enough because you can't plug the cable to the most later in the installation.

  My second thought and most promising suggestion is to connect the USB cable (although we do normally not until the software prompts us to) and use the installation wizard HP Print to get the insteaad of software to use the CD or download from the printer driver page. Still, I can't say with certainty that it works, but I don't see why it would not be worth a try.

  If it works, and we get the software installed you can convert the USB connection to a wireless connection using the software. Fingers crossed! Download and run the with the following link. Printer HP install wizard for Windows

  If this does not work, or you don't want to bother with it (not worth trying), I might consider getting a new model of the printer. You can even call HP. They might be able to offer a discount on a newer model. If you are in the Canada, U.S. dial 800-474-6836 or you can Contact HP worldwide.

• USB charging question

  New Fuze owner here. Love it so far.

  Question: Is it possible to NOT have the "rocket" USB charge when connected to the computer.

  Situation: I have completely loaded the "rocket" with a wall adapter. I listened to the radio for some time function, using about 2% of the battery. I plugged the USB to the computer and the rocket once I was ready to transfer songs. Of course, with the USB, the "rocket" begins to load when connected to the computer. I'd rather not "rocket" load it again since it is essentially charged already.

  So is it possible to disable the function of the load, even if I have the "rocket" connected to the computer?

  Or is it really important?

  Sorry if this has been resolved before. I did a search and didn't come with a similar topic. Thanks for any help

  -CW

  CW wrote:

  So is it possible to disable the function of the load, even if I have the "rocket" connected to the computer?

  Or is it really important?

  No, it is not serious and will not damage the "rocket".

  Like the Beatles famous song say, just "Let It Be."

  

• Car USB charger question

  Bought a charger car Macally, model USBCIG2, that lists all compatible iPod and iPhone models.  My question is that will work with my Clip charger, it is standard 5v usb output.

  MacAlly also has a model for Sansa, but good luck to find in a store.

  I searched on this site, but almost all are related to 120v Chargers, and I hope that someone knows this model and will know if he's out standard usb.

  Thanks, Mike

  I think that all shippers output USB 5v, +/-.25v.  The question would be the output amperage.  The USBCIG2 supports the iPhone, I've read elsewhere takes 1a for loading, that would be perfect for the Clip.  I used a 750mA both a 1 charger with my Clip, and both work very well.

  But you can contact Macally technical support to confirm this (and your first response will probably tell you to buy the Sansa model instead ).

• WUSB54GC Wireless - G USB Adapter question

  I have a vista computer running with a wireless router model: WRT54G2 V1, and a computer with adapter WUSB54GC xp who usually find the wireless network, im using WPA-Personal encryption.

  Any help would be grateful.

  Oh and by the way, I can connect to the network with my phone without any problem.

  I think you need to change some settings of your router for the wireless part. Follow the steps below and change the settings of your router.

  Open an Internet Explorer browser on your computer (desktop) wired page. In the address bar type - 192.168.1.1 and press ENTER... Let the empty user name & password use admin lowercase...

  For wireless settings, follow these steps: -.

  Click on the Wireless tab

  -Here, select manual configuration... Wireless network mode must be mixed...

  -Provide a unique name in the name box of the wireless network (SSID) in order to differentiate your network from your network of neighbors...

  -Set the Standard - 20 MHz Radio band and change the Standard channel to 11-2, 462 GHz... Wireless SSID broadcast should be enabled and then click on save settings...

  Please take note of the name of the wireless network (SSID) because it's the network identifier...

  For wireless security: -.
  Click the sub-tab under wireless > Wireless Security...

  Change the mode of WEP wireless security, encryption must be 64-bit. Let the empty password, do not type in anything... Under type of WEP Key 1 in all 10 numbers please (numbers only and no mailbox for example: your 10-digit phone number) and click on save settings...

  Please note the 1 WEP key as it comes to the security key for the wireless network... Click the settings advanced wireless

  Change the interval of tag to 75 > change the Fragmentation threshold to 2304, change the RTS threshold to 2304 > click 'save settings '...

  Now let's see if you can locate your wireless network and try to connect...