After I tried to format SD HC card...

Similar Questions

• HP LaserJet 4250: Brick HP LaserJet 4250 after firmware update failed. Compact Flash card recovery options?

  While performing an update of firmware via FTP using cURL, the HP LaserJet 4250 I worked has frozen. I had no choice but to cycle the power and hope for the best, but unfortunately it was bricked. The screen no longer lights upward when turned on (although I can hear the internal working mechanisms which is a good sign).

  While doing some research, I read it is possible to buy a 32 MB CompactFlash card with preloaded firmware (http://bit.ly/1BTZGCh), put the jumper pin on the logic board to boot from it and then re-flashing the firmware on the card. Looks like a foolproof solution, but I would like to save my company some money if possible.

  I was wondering if it is possible to use a Type I, 128 MB Compact Flash card I have handy and load the firmware above myself using a USB Compact Flash card reader/writer. Judging by what I read on another post on the forum (http://bit.ly/1GR6nM7), it seems possible to use a Unix/Linux utility such as JJ to clone another job Compact Flash card with preloaded firmware. However, I don't have such a card to clone. What I have is another HP LaserJet 4250 in working condition.

  So that raises the question, is it possible to insert my own blank Compact Flash card in a HP LaserJet 4250 work and copy the firmware the logic board to the map image by using the printer control panel? I guess it would be the only way, if necessary, to get the firmware on the card.

  However, if she is not the only way, is there an easier way to get the firmware on the card? For example, can I just format the card in FAT32 and copy the file to the RFU firmware to it and start the printer from him? Or the use of HP does it's own file system that is not readable on a PC? Also, would it be possible to use dd and simply copy the RFU directly on the card device believed himself (no file system) and boot from that?

  Sorry for the barrage of questions. I tried to find the answers to all these myself, but HP doesn't seem to provide a lot of detailed documentation on works of the firmware via Compact Flash process. I'd be very happy if someone with experience could provide the answers well! Thank you.

  Looks like I'll be solving my own number here haha. So after bit peicing together information from different positions and some experiences, I managed to save my LaserJet bricks!

  To fix a HP LaserJet 4250 bricks, two things are necessary: an of Type I CompactFlash card and other HP LaserJet 4250 work. It's a common printer, chances are you'll find another around the office.

  Here are the steps to fix the printer:

  1. The card CompactFlash Slot 1 (bottom slot) on board the logical work printer. Instructions on how to do so are provided by HP here: http://bit.ly/1NNyIol
  2. (May be optional) Initialize (format) the CompactFlash card by following the instructions on page 327 of the repair of HP LaserJet 4250 (http://bit.ly/1D22T7R)

     (a) turn off the power to the printer.
     (b) turn on the power to the printer and then press and hold the MENU button when begins the memory count.
     (c) continue to hold the button down until all the lights on control panel three printer flashes once and then remain lit. It may take up to 10 seconds.
     (d) press the BACK ARROW button. The display should INITIALIZE the DISK.
     (e) press Select (mark). The printer initializes the hard drive and continues its power on sequence.

  3. Now that the CompactFlash card is formatted, it is time to copy the NAND of the printer to work on the CompactFlash card.

     (a) turn off the power to the printer.
     (b) turn on the power to the printer and then press and hold CANCEL when begins the memory count.

  
  (c) continue to hold the button down until all the lights on control panel three printer flashes once and then remain lit. It may take up to 10 seconds.
  (d) press the SELECT button (check mark).
  (e) press the MENU button.
  (f) use the arrow to scroll until you see COPY BOOTLOADER IN SLOT2.
  (g) press SELECT, and the cursor should get the word BOOTLOADER. Use the arrows to change this to NAND.
  (e) press SELECT, and the cursor should get the word SLOT2. Use the arrows to change this to SLOT1.
  (f) press SELECT. The copy process must begin, and the status will appear on the screen.
  (g) once the process is complete, turn the printer off and remove the CompactFlash card.
• Now that we have a working NAND on the CompactFlash card, it's time to restore to our printer masoned. Perform the following steps on the printer of bricks.

  (a) turn off the power to the printer.
  (b) Insert the CompactFlash card into Slot 1.
  (c) set the jumper on the System Board on the arrow to start from the CompactFlash card.
  (d) turn on the power to the printer and then press and hold CANCEL when begins the memory count.
  (e) continue now the button until all the lights on control panel three printer flashes once and then remain lit. It may take up to 10 seconds.
  (f) press SELECT (checkmark).
  (g) press the MENU button.
  (h) use the arrow to scroll until you see COPY BOOTLOADER IN SLOT2.
  (i) press SELECT, and the cursor should get the word BOOTLOADER. Use the arrows to change this to SLOT1.
  (j) press SELECT, and the cursor should get the word SLOT2. Use the arrows to change this to NAND.
  (k) press SELECT. The copy process must begin, and the status will appear on the screen.
  (l) once the process is complete, turn off the printer, remove the CompactFlash card and reposition the jumper to the default position.
  (m) turn on the power to the printer. That's all! Everything should work normally again. No brick no more!

UPDATE (07/04/15): IF YOU DO NOT HAVE ANOTHER HP LASERJET 4250

It turns out that you can just download the firmware on HP website and create an image of it bootable on a CompactFlash card. However, it is not as simple as just copying the firmware image. You should ignore the 633 first bytes of the file of the firmware (at least with the 08.260.1 version), then copy the rest on a CompactFlash card. You can accomplish this by running the following command on Mac OS X or Linux. Download and boot from a live CD of Linux like Ubuntu if necessary.

DD if = lj4240_4250_4350fw_08.260.1.rfu ibs = 1 skip = 633 of = / dev/disk2

Replace "lj4240_4250_4350fw_08.260.1.rfu" with the name of the appropriate firmware file and ' / dev/disk2 ' with the appropriate device if necessary.

If you prefer, a bootable copy of the revision of the 08.260.1 firmware can be downloaded here: http://bit.ly/1FeF3YP

As you can see in the image below, when opened with a hex editor, image downloaded from HP firmware starts with 1 b 25 31 2d bytes... However, the printer does not include the first part of the file when you start, because there are instructions of PJL and not binary. Bootable image begins at 631 byte (277 hex) highlighted. It may be possible that this address may change in future versions of firmware or for different printers, so here's how to know where to start the startup code. The first occurrence of 00 00 04 24 bytes, is where that starts. In ASCII, it looks to "... $". In this sequence, the 00 first is the beginning of the startup code. Here's another picture, of what should look like a bootable firmware image.

Non-bootable firmware image, downloaded directly from HP


Bootable firmware image, extracted of HP download



For fun, I unpacked it some of the files included in the firmware image, and it turns out that tracks on the printer to LynxOS. Who would have thought?

• Burned a file .img on 8 GB SD card, formatted the SD card, now showing only 950 MB SD card.

  I burned a file .img on a 8 gb SD card, and because I didn't want the file, I formatted the SD card.

  Now windows says that the SD card has a capacity of 950 Mo. What is the problem and how can I solve this problem?

  Thanks in advance!

  Have you tried to format your USB drive using the command line? A little more difficult operation with no GUI at all

  Here are the codes so that you can give it a try.

  1. Click Start orb and type 'cmd '.
  2. When cmd opens, type diskpart
  3. After that, type listdisk
  4. Select the drive that is your key USB and Select disc (number of your USB drive)without the brackets of type
  5. type clean
  6. type create partition primary
  7. type format fs = fat 32 fast
  8. type exit

  hope this will fix your problem,

  Kind regards

  Andrew

  Always "vote as helpful" for those who helped and 'mark as answer"If the info helped you in a sort of way. Thank you

• Admin account happened after installing the netgear Equium pc wireless card

  I bought a netgear pc wireless card that I was assured was compatible with XP. After installation, I got to start where the Welcome screen had gone and I have a black screen with a newspaper box in details request.

  As an administrator, I connected only to be told that I have no right of administration. I can only connect my using my account limited son. There is no account of the administration at all, I can not access my files or access the administration account not yet a guest account.

  Only a limited account is shown.

  Desperateto back in the system to remove the software, but this without icannot rights. admin tried pressing f8 safe mode, but it doesn't not work can not enter in save mode... on f12/f2 are leaving upwards. Tried to hide the password help... will not accept any of my contact information to
  all the

  Any help... Please

  Hello

  seems really strange, especially after the installation of a pc wireless card software. I can give you a suggestion:

  EVERYTHING YOU DATA BACK UP AND REINSTALL YOUR OPERATING SYSTEM.

  I think that it is the only way, because when you describe you already tried almost every thing, then a recovery is inevitable. Copy/backup your data and put the new OS on the HARD drive.

  After that, make separate accounts (for example 3 accounts) and install the card netgear with the admin account. It should work.
  Would appreciate some comments.

  Welcome them

• format micro sd card acer liquid e2 problems

  Hello I have an acer liquid e2 smartphone running on android jelly bean 4.2.1

  recently, I bought a micro sd with a capacity of 32Gbs of kingston card

  at first glance, everything worked fine, but yesterday, I wanted to transfer files via 4Gbs.

  I noticed that it is not possible for FAT based micro sd for this cards but if format you the card micro sd for exFAT, or NTFS you could work around this transferlimit.

  so today, I bought a drive from sd cards to solve the problem.

  I put my micro sd card in a sd card and then the sd card in the sd card reader/writer.

  I connect to my computer and I reformatted my card micro sd, exFAT AND NTFS, but none of them has been recognized by my phone.

  so I searched more on this subject, and it seems that android supports NTFS...

  so I wonder is my e2 liquid acer problem here? and what do I do?

  I hope that I did not purchase this reader/writer for sd cards

  Thanks for the help

  Sorry for the late response

  my phone is rooted so I lack it but there were a few problems update even if it was properly the

  so I changed my phone to its factory settings and updated to 4.2.2

  It was not always able to recognize NTFS in itself, so I searched again and found an app that should be able to do

  the app is called "paragon NTFS and HFS +" it wanted to download it but I need to root my phone to use this application

  so I rooted my phone after update to 4.2.2 and downloaded this app

  now, I'm finally able to use my micro sd NTFS-formatted card

  I don't know if the app alone would be enough to do, but it was clear that I needed the app or at least root

  4.2.2 update alone is not enough

• I buy an original windows vista.y after that I have format my computer, I can't activate it? Msg show me the product already use it?

  I buy an original windows vista.y after that I have format my computer, I can't activate it? Msg show me the product already use it?
  my email * address email is removed from the privacy *

  To analyze and solve problems for Activation and Validation, we need to see a full copy of the diagnostic report produced by the MGADiag tool (download and save to the desktop - http://go.microsoft.com/fwlink/?linkid=52012 )

  Once downloaded, run the tool.
  Click on the button continue, after a short time, continue button will change to a copy button.
  Click the copy button in the tool (ignore the error at this stage) and then paste (with r-click and paste or Ctrl + V) in your message.
   
  Have you tried to phone activation?  Activate by phone.  http://TechNet.Microsoft.com/en-us/library/cc736912 (WS.10) .aspx
  Or click Start and type ' slui.exe 4.  Do not meet the guests until you are asked if you want to speak to an agent.  An agent can tell you the State of the product key.
   
   

• Xperia Z3C issue after the transfer of applications on SD card

  Hey guys, hoping you can give me a little help here.

  I've updated my Xperia Z3C to Lollipop the other day, which was until now very well, but last night I moved a few apps to my SD card to free up some of the internal memory of my phone (do not use any application of third party to make).

  It seems that something has gone wrong, as my phone restarted itself, while one of the applications was yielding and now EACH of them will be displayed as an icon of plan with a little red in the corner SD card, and when you click on it it says "Application not found". I guess that means that the data of the app to the SD card is damaged. As I have photos and music on my SD card that still work, I really don't want to format it, but don't know what to remove to make these icons disappear from my app menu!

  I'm not bothered all re - install apps, this isn't a problem for me at all, but the main question opens the application menu and the first page and a half being nothing else than these icons 'app not found! " I have attached a picture. As they do not appear in the list of applications in environments more that I can't get rid of them!

  Thanks for your time guys, hoping someone can advise!

  EDIT: Just tried to remove the SD card and reboot my phone, but these icons of the action plan are still show which is very disturbing!

  

  Alternatively, you can try to reset the home screen settings-> Apps-> all-> House Xperia-> clear data-> OK but please note that this will reset your homescreen by default parameters (widgets, shortcuts).

• I get the message "format was not completed successfully" when trying to format my USB through "Computer management"

  ---------------------------

  Virtual Disk Manager

  ---------------------------

  The format failed.

  ---------------------------

  Ok

  ---------------------------

  Hello
   
  1. What is the number of brand and model of the flash player?
   
  Some brands of car pen have formatting tools. You can visit their website and use as appropriate.
   
  2. you are formatting in NTFS or FAT32?
   
  If it is NTFS, you must restart your computer after format.
   
  Follow the steps mentioned below and check if it works to solve the problem.
   
  Note: Please back up your data before formatting your USB
   
  Step 1:
   
  First of all, try formatting in safe mode
   
  Step 2:
   
  a. open a DOS command prompt (start > run > type "cmd") and type:
  attrib - r h - s. x:\*.*/s
   
  This will change the attributes of all files on the USB key. Read-only, hidden and system attributes will be deleted.
   
  b. replace X: with the drive letter of your USB. Now, you will be able to see them in Solution Explorer and remove them, without anything shaped.
   
  Step 3:
   
  Format it with DOS commands
   
  a. open the DOS command prompt (start > run > type "cmd" in the box)
  b. type:
  X: FORMAT FAT32/q / V: PenDrive
  This will reformat the Flash DRIVE using the FAT32 file system and label the USB key drive. Replace x with the actual drive letter of your USB drive. For more help on this command, type:
  FORMAT /?
  at the command prompt.
   
  Step 4:
   
  There could be a virus that can stop your pen drive formatting. I wish that you run a virus champagne using your security once software before trying new format.
  
  Aziz Nadeem - Microsoft Support

  [If this post was helpful, please click the button "Vote as helpful" (green triangle). If it can help solve your problem, click on the button 'Propose as answer' or 'mark as answer '. [By proposing / marking a post as answer or useful you help others find the answer more quickly.]

• I tried to format the C drive and then reinstall Windows Vista using the windows reinstall disk but I couldn't start in it.

  * Original title: reinstalling Windows Vista

  I tried to format the C drive and then reinstall Windows Vista using the windows reinstall disk but I couldn't start in it. I restarted my computer, press the F12 key and selected boot from cd/dvd, but the computer still started in windows. My computer is Dell. If there is no solution, it is possible to reinstall windows without using the disc?

  Hello

  Here are the options of relocation:

  How ro reinstall from the Dell recovery partition:

  http://www.Dell.com/support/troubleshooting/us/en/04/KCS/KcsArticles/ArticleView?c=us&l=en&s=BSD&docid=DSN_336966

  Reinstalling the printer Dell supplied disk:

  http://www.Dell.com/support/troubleshooting/us/en/19/KCS/KcsArticles/ArticleView?c=us&l=en&s=DHS&docid=DSN_339949

  ______________________________________________

  You can also borrow and use a Microsoft Vista DVD, which contains the files for the different editions of Vista (Home Basic, Home Premium, Business and Ultimate) must be installed. The product key on your computer / Laptop box determines what Edition is installed.

  Other manufacturers recovery DVDs are should not be used for this purpose.

  And you need to know the version of 'bit' for Vista, as 32-bit and 64-bit editions come on different DVDs

  Here's how to do a clean install of Vista using a DVD of Vista from Microsoft:

  "How to do a clean install and configure with a full Version of Vista '

  http://www.Vistax64.com/tutorials/117366-clean-install-full-version-Vista.html

  And once the operating system is installed, go to your computer manufacturer's website and get the latest drivers for your particular model or laptop computer.

  And phone Activation may be necessary when you use the above installation method.

  "How to activate Vista normally and by Activation of the phone '

  http://www.Vistax64.com/tutorials/84488-activate-Vista-phone.html

  See you soon.

• I was trying to read a sd card in my phone opera and it stop my computer windows vista laptop.

  Original title: windows vista compatibility?

  I was trying to read a sd card in my phone opera and it stop my computer windows vista laptop. Is their a capacity problem or am I missing something. I have long phone trying to upload photos to save. Have I missed a program?

  Hi Garym.nsb, fl,

  ·         Did you do changes on the computer before the show?

  ·         You receive an error message?

  Follow the suggestions below for a possible solution:

  Method 1: Try to use the SD card on another computer and see if you can access the files.

  Method 2: Performance Automatic troubleshooting of Microsoft.

  Microsoft has automatic convenience store to find and troubleshoot hardware problems. Try the following steps to run the fix it.

  Visit the site and download Microsoft fix and run it with the following success:

  http://support.Microsoft.com/GP/hardware_device_problems

  Method 3: Try to use an external card reader to see if it helps.

  Let us know if it helps.

• Trying to format a partition that has an extra on BONE. I can't click on the format of ideas?

  Unable to format drive

  trying to format a partition that has an extra on BONE. I can't click on the format of ideas?

  Hi Dave2474,

  I recommend to format from the disk (disk operating system) otherwise, it will boot entry.

  Note: Make sure that you back up important data before formatting the disk.

  You can also view the article mentioned for more information below:

  Create and format a hard disk partition

  http://Windows.Microsoft.com/fr-FR/Windows-Vista/create-and-format-a-hard-disk-partition

  Data loss caveat:

  Converting a hard disk partition or volume from NTFS to FAT32 requires that you reformat the partition, which deletes all the data on this subject. Be sure to back up data that you want to keep before you begin.

  Hope this information helps.

• How to format the SD card?

  Android 4.0 will erase all data on my phone, right?

  I want to format the SD card, too, because some setting or cache is stored on it as well.  When and how should I do this?

  Here's how to format the sd card
  Settings > storage > unmount sd card > remove sd card

  Don't forget to mark the right answer and the useful answer

• I AM TRYING TO FORMAT A DRIVE IN VISTA. __

  I'M TRYING TO FORMAT A DISK IN VISTA FOR FAT 32. I WENT ON THE COMAND PROMPT AND TYPED - "FORMAT Z (Z IS THE NAME OF MY DRIVE) FS: FAT 32/Q ', THEN ENTER. "THEN, I GOT THE PROMPT: ENTER IN THE STREAM OF EXCITEMENT OF VOLUME LABLE FOR Z." IT IS AN EXTERNAL DRIVE. THANKS FOR YOUR HELP. HOW TO FIND THE VOLUME OF DISK? THE DRIVE IS A NTFS FORMAT.

  Hello

  Open an elevated command prompt

  Start - type in the search box-> find CMD top - right click Run AS ADMIN

  at the command prompt

  Flight Z:
  Press enter

  format FAT32 Z:
  Press enter

  -----------------------

  Also to find the volume name:

  Start - type in the search box-> find Windows Disk Management in top - double click

  I hope this helps.

  Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

• trying to format a drive for nintendo r4

  the download of the software, everything is ok until I go to the step when it says to format the iset, the default fat 32 drive and choose quick format press start then sometimes windows canoe the disc format error

  Hi lloydlarge,

  (a) what exactly you are trying to do and how are you trying to achieve?

  (b) when exactly you get this error message?

  (c) are what software you referring?

  Your question does contain all the required information necessary for us to help you.  Please re - write your question, this time make sure you have all the information necessary and we will try to help. »

   

  If you try to format the R4card Nintendo, you can follow the steps below:

  (a) click Start in the start search bar type cmd, right-click on the command prompt icon in the box programs and then click Run as administrator.

  (b) at the command prompt, type Format/FS: FAT32 X: and then press ENTER.

  Where X is the drive letter you are trying to format it,

  Important: -information (DATA) stored on that particular drive will be lost, you need to back up your data before attempting the above commands.

  Thank you, and in what concerns:

  Ajay K

  Microsoft Answers Support Engineer

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Formatting the sd card to ntfs format

  Hello community,

  My memory card SD camera is in FAT32 format. Is it good if I format my SD card in NTFS format? I want to know which is the best format for memory cards. Help, please.
  Thank you...

  It depends on if your camera could support NTFS, so you should ask your camera manufacturer, whoever it is.  My thought is "if it's not broken, don't fix it".  There is not much to gain by changing the format, so I would say that potential problems outweigh the economies of small space formatting.

  Good luck.