Tecra S5 - endless beeps and start-up

Similar Questions

• Windows, 3 beeps and new graphics card will not start

  Hello

  has obtained a HP p6-2105eo, windows 7. At a radeon HD 5670 graphics card that works very well. Bought a Gigabyte GeForce GTX650 2 GB. Can see screen start and seems it does not respond by clicking the Esc key. I hear 3 beeps with a delay of 20 to 30 seconds after each beep. After several minutes (2-3 minutes), the screen goes black with a command prompt flashes at the top of the screen on the left and nothing more.

  Think it might be damaged the card, so went to the store and got me a Gigabyte GeForce GTX660 OC 2 GB instead. The same problem.

  Also updated to the latest version of the available for my motherboard BIOS to: 2012-08-14, Version7.16 Rev A, 2.87 M

  Also already replaced at a 700W PSU, so that it can handle the best graphics cards.

  So, what could the problem with the recent graphics cards in this office?

  After numerous tests, such as reset cmos, bios reset, outside and inside with battery and so on... Nothing solved.

  Re-tested with the old graphics card and started immediately.

  After intensive research on Google, the BIOS is probably still too old to the new graphics card.

  Yesterday, I replaced the motherboard and the problem disappeared. Works fine now with the new card.

  Will use the older motherboard in an old computer instead, it isn't a total waste to replace.

• Desktop Compaq Presario has beep and won't start

  My Compaq Presario desktop PC makes a sound beep and won't start. The SN # is CNX65112RS. Someone help me please!

  That's great. Please mark the thread as solved.

• Machine starts beeping and stops...

  My friend just put a Corsair 850 watt power supply in his P6404y machine and tried to stock update the 9100 Nvidia graphics card to an Nvidia GTX 460 and the machine would be fine, however when he tried to play games the machine would beep and closed which is usually a symptom of a GPU overheat condition.  He then returned the GTX460 and upgraded to a PNY GTX 470 thinking his first card was a supplier without a name and the same problem occurs.   He then put a big fan next to his computer with the side and if the machine starts to beep it makes and may continue to operate, but I told him that option is not recommended.   There is nothing in the Bios to see what the parameters are for the monitoring of heat on a GPU and there is no newspaper generated indicating what the cause of the stop is.   We looked online for help and there is none available for mother Pegatron m2n78 - made by Asus for HP.   Is there a software that allows to monitor and change settings for the beaches of heat on a GPU, or y at - it another way to identify which monitors the machine for the heat so we can try to solve this problem.   The bios options are very limited and we are really stuck on this one.   Help, please!   Thank you

  Chuck

  OK, we believe that we have solved the problem!   Even with the upgrade of the energy supply, the issue seems to be with the current Nvidia cards.   Under site Web CPUReview, they show the max of each graphics chip power draw.   Looks like the Nvidia GTX 460 drew 160 watts and the next card, we tried the Nvidia GTX 470 drew 170 watts maximum.    We tried and tried and failed to get the system working.    Now, a few months later, we were given another chance and used a card Geforce 9700 GS PCI-E and it works beautifully.   The card has not been fast enough, but he had only a maximum current of 82 watts.   Makes us think it was the fact that the GS 9700 uses DDR3 and recent Nvidia cards use DDR5, but after checking, we found that had nothing to do with the problem.   Then plunges us into the issue of tension and grabbed a new ATI Radeon HD 5450, who also ran fine and has a maximum circulation of power of 20 watts.   The map was underpowered for 3D graphics, so we then made a leap up to an ATI Radeon HD 6770 and again once it has worked very well to 108 watts.   Do not forget that we were back all our previous equipment, but we got a Thermaltake 500 watt power supply available, so we had already put in the machine that we thought that the stock of 300 watt power supply was a nameless, low power unit.   So far, he played several games at speed without any problems.   Our last thought is that the Pegatron m2n78 - the motherboard don't like prints of the power of the latest Nvidia cards.    I hope that helps you people!  Wooohoo! OK, it's game time!

• Desktop HP Pavilion h8-1150z: desktop HP Pavilion h8-1150z - 6 beeps and no start

  My Home Office HP Pavilion (Pav HP h8-1150z AMD (Angelica) 3 c NAPC) is about 3 and a half years (and apparently 6 months past my HP Care Pack coverage extension).   It runs Windows 7.  Yesterday while the computer was not idle, he began to make a new sound of snoring (a bit like a fan noise).  So I stopped the machine.

  Now, when you try to restart, it gives 6 beeps and goes no further.  It's always a little strange noise of snoring.  After my research, it looks like it's some pre video failure.

  I tried to remove the graphics card and re-sitting there.  While I had the video card, I tried to restart.  The sound of snoring had gone, but still have the 6 beeps.  While the Office has been opened, I also reinstall memory and blew out the dust.  Still no luck.

  I've seen a few suggestions to clear CMOS but don't know what I would need to do it with this machine.  I unplug the machine and press down the power button for several seconds to erase any residual power.

  Any suggestions/recommendations?  If it looks like my graphics card has gone bad, any suggestions on how to buy a compatible replacement?

  Thank you.

  old_geekster,

  I talked to Support PNY and they agreed that the graphics card, I bought should be compatible but does not appear (maybe because I was running an old version of the bios on the HP computer, but I found myself stuck in being not able to update).

  So I ended up finding another graphics card (EVGA GeForce 8400 GS 1 GB DDR3 PCIe 2.0 graphics card 16 x) and that did the trick!  Once I have installed the new card I was back running.

  Thank you once again for all the help you have provided me and your community support!

• Satellite M65 gives two beeps and won't start

  Hi all

  Need help. Why I turn on my Satellite M65, it gives just 2 beeps and nothing happens.
  No display. Tried the Express Media Player too... same thing.

  Can any body want to say 2 beeps?

  Thanks in advance!
  A. Moiz

  Thanks for pointing this out!

• Tecra S1 series don't start

  I have a Tecra S1 (PT831A - 146KG) who is unable to start. It gives a beep code of 2 short beeps and 1 long beep, pause, then 3 short beeps. Then it repeats.

  What does the beep code mean?

  The unit is no longer under warranty and took part and couldn't find something this bad that I could see.

  [Edited by: admin November 19 05 08:42]

  Hi guys

  In my opinion, there is some malfunction of the equipment. I put t think that the laptop will beep without cause. Sorry, but I think that any service partner will be able to map the beep.

• ASUS GeForce GTX 750TI install on Pavilion P6 2010UK leads to 3 beeps and black screen

  Hello

  I recently tried to install a 750TI Asus GeForce GTX on my HP Pavilion P6 2010UK using a SATA 6-pin PCI Express power connector, but after starting I get three beeps and a black screen. Can someone help me with this please?

  As an observation, the PC was working fine before you install the new card.

  Hello

  Many of the graphics cards NVIDIA GTX 750 will not work in the HP PC that do not have a BIOS version 8.  Your PC has a BIOS version 7 and I do not expect HP to publish a version 8 BIOS for your PC.

  Return the card and try one of the models that should run on a PC equipped with a legacy BIOS.

  MSI NVIDIA GTX N750 TI and the MSI GTX N750 TF

• Tecra M4-S435 does not start

  My Tecra M4-S435 will not start.
  When I turn it on, all I hear is a quick check of the DVD player, a hum of hard drive and fan.
  I don't see anything on the screen at any time. I tried an external monitor and still see nothing.

  Is this a failure of hard drive, the screen failure or something else?

  > That could tell if pulling the battery for 30 minutes he gets to start? (I have not tried with my original Tecra, but I will soon... I just have to put a hard drive in it first...)

  I m not very well, but I guess that the BIOS would be defined default value that could help solve this problem.
  I had this similar problem with my Toshiba laptop not and the same workaround helped also

• a short beep and 1 beep on hp pavilion media center 8120n

  My Tower is not start when I turn it on.  My son took off the side and that he was going to put more memory in it for me, but in the end it didn't.  He put the memory old back in and put the side cover back on.  Today, when I turn it on, it has 1 short beep and 1 long beep.  It just won't boot to the top.  Can someone tell me what I should do to get this operational return?

  RBurke, welcome to the forum.

  The BIOS beep Code you hear is due to a memory problem.  Here's a guide that will help solve the problem:

  http://support.HP.com/us-en/document/bph07107

  You should read the entire page.  Beep codes common to HP computers are towards the bottom of the page.

  If your problem is solved, please click "accept as a Solution.

• HP Pavilion HPE H8 1234: HP Pavilion HPE H8 1234 corrupted BIo 8 beeps and the led lights

  I was updating my BIOS and I got an error. Now, the coomputer starts with 8 beeps and 8 power botton blinking LED. IV tried WIndows update Bios USB, key and B. Im running outta ideals. Someone help me please.

  Hello

  Situations of BIOS corrupted can be not recoverable with some versions of the HP BIOS.

  Disconnect the PC and remove CMOS battery and press and hold the power button for 60 seconds. While the battery is removed, test it with a voltmeter-ohm - and if it isn't close to 3.3 volts, then replace it.  It's a $4 item.  If the battery is good before you reinstall it, plug the PC back in and give it a go.

  This procedure of recovery of the HP BIOS claims to work by internal HP.  Read the instructions carefully.

• drive hard beep and does not

  I have a laptop E1 571 and have been using it with win 10 since its release, had minor problems, but the day of Christmas (from everyday) my hard drive started to make beep sounds and load, only to start menu screen but the hd does not!

  Photo of the scene, taking pictures of the fam on Christmas day and need to load them onto my laptop so I continue to put my mem stick in laptop, copy photos anywhere on disk, but by the time finished my laptop decided to crash. I rebooted it without any problem, but the laptop moved it crashed again and did not the acer logo screen, before you tell me, I have a pxe - e61 media test failure blah blah blah (this is after I have F2ed the hell out of it and changed to the legacy bios.)

  I tried to see if the hard drive would work on my pc, but it made the same beep and does not appear in 'my computer '.

  Do I need a new hard drive or I can solve this problem by using backup/restore discs? I will need to buy or download Acer?

  a HARD beep disc is a symptom of death.

  You can only buy a new HARD drive.

• When I type on my keyboard my laptop beeps and the keys seem to react quickly to be like.

  When I type on my keyboard my laptop beeps and the keys seem to react more quickly especially when I hit the same key twice.  My cat has been on my keyboard, and when I found it on it there was all kinds of screens that she had accessed... ridiculous!

  Hello

  I suggest you to perform a system restore to restore the computer to an earlier point in time before the problem started.

  Refer to the article help:
  http://Windows.Microsoft.com/en-us/Windows-Vista/what-is-system-restore
  http://Windows.Microsoft.com/en-us/Windows-Vista/system-restore-frequently-asked-questions

  Kind regards
  Afzal Taher
  Microsoft technical support engineer

• Alienware 18/w 2 x GTX 980 M 8 GB problems SLI - 8 beeps and no video now detected

  Hey everybody,

  I picked up a 'is' 18 with 2 x GTX 980 m 8 GB cards discreet alienware.

  When you first start up, I got the dreaded "8 beeps" and a black screen.

  I did a lot of online guides, and all said that one or two video cards must be bad.

  So, I opened it and removed the two cards and then tried to turn on without all video cards, which works 100% great.

  I think I tried put 1 card in slot 1, and turns, but in BIOS, Manager devices, GPUz etc, the video card is not detected.

  I tried the same thing with Slot 2 only and the same problem.

  I also tried to reinstall just the two and I still had 8 beeps.

  These video cards are worth about $500 + each, so I'd like to find a way to at least get a job if possible.

  Someone at - it ideas?

  Thank you!

  Both cards video with SLI cable, everything works correctly! Wow!

  For all those who come to this page, here is my best explanation of what was the fix:

  Remove the battery, remove the video cards, maybe reinstall OS, replace the battery so that the video cards are out, update BIOS to later restore the default BIOS settings, reinstall the video card (1 at a time).

• Alienware x 51 5 beeps and won't turn on.

  I got my x 51 for about 3-4 months now and after that I restarted my computer it turned their backs, making 5 intervals of beep and won't start... I tried fixing it all in, I'm really worried because I saw this as a common problem with this system.

  I tried this soolution but id does not work: http://en.community.dell.com/support-forums/desktop/f/3514/p/19477069/20241901.aspx

  Any help appreciated. Thank you.

  I would recommend that you contact Alienware technical support and ask them to guide you through some troubleshooting.

  X 51, 5 beeps's graphical associates.