After RAM upgrade Satellite P100-222 is on but nothing comes on the screen

Similar Questions

• Re: Satellite P200-13Z is on but nothing comes on the screen

  When I turn on my laptop the lights come on as usual and you can hear the fan but nothing cames up on top of the screen.
  Then a little light orange on the cd from the drive that lights up but I do not have a disk in it

  Did you perhaps updated RAM modules?

• Satellite P300 - on power turns on, but nothing happens on the screen

  Hello

  I have a Toshiba Satellite P300-1F0, yesterday it was working fine, I turn it off nothing extraordinary happens.
  Although later, when I went to turn on I pressed the power button, but the screen was not working, I tried to connect an external display but nothing showed on this subject, although the power of lights was turned on, the drive CD opened and closed as normally don't and I could hear the fans work.

  That I realize windows 7 welcome sounds were not playing even after a few minutes with the laptop turned on and the laser mouse was working only for a few seconds before it shuts down.
  It was when I started to believe that this was not a screen problem, but something else.

  I have read a few forums and I tried to unplug the power cable, remove the battery, press the power button for 60 seconds and turn it on and it worked, it worked fine, I used the computer for a few hours without any problem.

  Today the same problem has occurred, and I tried to set the same way as I did yesterday, hold the power button for 60 seconds, but this time it did not work. I retried it for 3 to 5 times and nothing.
  After a few hours, leaving the computer is off, resting, I retried the process and now it worked.
  Now I'm afraid to turn off the laptop, because I need a lot of time and patience range to activate.

  What could be the problem and how do I solve it?
  Can you help me?

  cumpliments,
  Adriano

  > I have read a few forums and I tried to unplug the power cable, remove the battery, press the power button for 60 seconds and turn it on and it worked, it worked fine, I used the computer for a few hours without any problem.

  Yes, this workaround is sometimes useful to bring back the unity of life.

  > What could be the problem and how do I solve it?
  It's hard to say what causes this. Satellite P300 is an older model mobile phone, so it is possible that among the pieces of equipment begins to malfunction.
  It would be interesting to know if the use of the various modules of RAM would change the functionality of the laptop. If you have compatible RAM modules spare you can test it.

  In the worst case, it could be possible that beginning of motherboard laptop malfunction.
  It would be the worst case I hope for you that it s not mobo related issue.

  PS: Check if your BIOS is up to date. In case this is not the latest version, try to update the BIOS.

• Could not load the BIOS after RAM upgrade - Satellite A200

  Hello

  I've updated my RAM memory on my laptop Thishiba Satellite A200 (from 2 GB to 4 GB) but unfortunately now I can't enter the BIOS. Automatically load the operating system (windows 7 64 bit).

  How can I solve my problem?

  P.S. The new RAM works perfectly and it is recognized by Windows 7.

  Post edited by: bennito

  I don't know what you've done and why this happens, but what you can do is to check if the quick start option is enabled.
  Open Toshiba Assist > optimize > HWSetup > priority Boot and check the startup speed option it.
  Remember that it is set to Normal.

  Please, check and send comments.

• Impossible to Intel 3945 ABG mini Intel 4965 AGN adapter PCIe on Satellite P100-222.

  I bought the new Intel PRO wireless 4965 AGN mini PCIe card, but then I try to replace the original block my Satellite P100-222 starts simply, power LED TURNS on, power led flash HARD drive twice & nothing happens, BIOS screen is not displayed.
  I have updated the BIOS to the latest version 3.80, remove the supervisor and user passwords, reset the BIOS to factory default, replace new card to another in the store, but the computer still does not start with the new wireless card installed. Same time he started nice with the old card or any card in this mini PCIe slot.
  I know the other manufacturer have BIOS block for not original of the card, but in this case, the error message appears on the screen during POST. In my case I don't get any sound or display messages. I can't find any info on lock BIOS in Toshiba laptops.

  Any ideas how I can get to work my new wireless card?

  Thank in advance for the help.

  Hello Grog

  I presume you bought it without any verification of compatibility. Am I wrong? AFAIK this card WLAN (AGN) has 3 antenna connectors and your laptop to two. On processors Intel page I didn t find any info on compatibility, but I imagine that this WLAN card will be delivered with newer chipset and it is not easy to say if you can use it on your hardware platform.

  All block BIOS I can't tell you everything but after 8 years of use of laptop Toshiba I can say that something like this is not known to me.

  You can try to contact your local dealer or partner authorized in your country. They are also specialized for the hardware upgrade. They may be able to say more on the compatibility with the WLAN card you.

• Satellite P100-222 - graphic card crashed - alternatives?

  Video card NVIDIA GeForce Go 7900 GS 512 MB broke down for my laptop Toshiba Satellite P100-222. I found the video card printed on this ID: DA0BD1U8AD9.

  I have searched to find this card on eBay or Google but could find based on reasonable prices.
  How/where can I find possible alternatives for DA0BD1U8AD9 video card?

  I can find similar names, but I'm not sure they are compatible

  Hello

  A graphics card replacement / upgrade possible isn t
  I put t know any laptop manufacturer where such upgrade would be possible.
  The GPU would not be supported by BIOS

• Satellite P100 - 222 PSPA6E - when the new GPU driver will be available

  Hello!

  Me laptop Satellite P100-222 (PSPA6E), a GeForce 7900GS Videocard. Vista operating system is established. Display version 7.15.11.5666 driver.
  The driver are already obsolete, to some new 3D schedules it has a bad display of structures and so on.

  It would be desirable to learn, when appears in new display driver?

  Hello

  > when will appear in the new display driver?

  Who knows I didn t find any info on the Toshiba page.
  But as far as I know the many laptop models are equipped with the same graphics chip.
  Therefore, you can also try a driver for another model that was equipped with the same GPU chip.

  Welcome them

• Satellite P100-222: BIOS password has been set - why?

  I have Toshiba Satellite P100-222 and my problem is the BIOS access. A few days ago, I bought nootbook and if I want to go BIOS F2, I have to write a password to enter. My question is do you know where I can find this password? Perhaps this password is default for all nootbooks models? If so, I'll be gratfull to give myself to him or delete.

  I'll be waiting to meet you.

  Hi Pawel,

  There is no password to the BIOS when you first buy the default on a Toshiba laptop. They are defined by the user through the installation and configuration (and even then they are optional).

  If you bought your laptop to a Toshiba dealer, it is possible that the dealer has put the password in this case, you will need to ask them what it is. If you bought your laptop private (of someone else) then the same thing applies, you should ask them what your password.

  In any case, if you do not or can not get the password then you need to take the laptop to an authorized service partner for them to reset the CMOS chip and reload the BIOS.

  Kind regards

• Upgrading RAM on Satellite P100-286

  Hello, I'm looking to upgrade the RAM on my laptop Toshiba Satellite P100-286. I did some research but have resulted in conflicting reports.
  RAM DDR2 RAM right or is it So DIMM DDR2 RAM? According to the Toshiba site, it is not, but when I go to one of the sites Web "Upgrade your Ram" and enter my brand and model, he suggested the So-Dimm type...

  I'm looking for a little clarification. Thank you.

  http://UK.computers.Toshiba-Europe.com/innovation/JSP/SUPPORTSECTION/discontinuedProductPage.do?service=UK&DISC_MODEL=0 & ACTION = PRINT_WITH_BACK & com .broadvision decided .do w = Yes & PRODUCT_ID = 125204

  See this page:
  http://www.orcalogic.co.UK/ASP/ProdType.asp?ProdType=28328&ft=m&St=3

  You will find details on the compatible RAM modules:
  You need DDR2 533 MHz (PC2-4200) 200 - PIN SODIMM

  Of course, you could choose another manufacturer like Kingston but I m using Kingston modules in my other laptop and it s ok.

• Satellite Pro C850-1HD: valid guarantee after RAM upgrade?

  I work with a laptop Toshiba Satellite Pro C850-1HD in the warranty period, and I would like to know whether to extend the warranty for laptop RAM is maintained.

  Thank you

  > I would like to know whether to extend the warranty for laptop RAM is maintained.
  RAM upgrade does NOT affect the warranty.

  Here you can find instruction and nice workaround how to replace Toshiba Satellite Pro C850 modules series
  [Satellite Pro C850 / L850 - Memory Module replacement procedure | http://aps2.toshiba-tro.de/kb0/CRU2603BZ0000R01.htm]

• Question about upgrading RAM on Satellite P100-423

  Hello

  can someone reassure me I'll buy the correct RAM and the best for my 2 Satellites. One is the P100-423.
  The other is Satellite Pro P100.

  (1) can I use modules of PC2 5300 DDR2 SO-DIMM 200 pin - 667 Mhz on both computers.
  I want to buy chips to 4 x 1 GB (all the same), so both will have 2 Gig ram PC.

  (2) I saw the bullets above with 533 Mhz, but told me I can use or 667 Mhz. Is this correct?
  667 Mhz would be faster and better is not it?

  (3) some chips are also designated PC2 - 4200 - instead of PC2-5300. Again, I can use either?

  (4) Finally, I always thought that it was better for if adapt to 2 memory chips to live the same size - that is why I want to use 2 x 1 GB chips.
  Yet, I was recommended to mount 1 x 1 and 1 x 2 GB in each pc.
  I know that IE a total of 4 GB is theoretical only 3.25 GB is possible.
  But asymmetric training will offer much greater performance on balance training 2 x 1 GB. ?

  Thank you very much for all the advice offered

  Robert

  With the help of RAM slower is possible. I have another laptop to work with the iso 4200 5300. It works ok.

  However, using the exact speed is better because it gives the best performance. Your system calendar is set on those memories.

  However slower modules, but more RAM still will give you better performance.

  3G seems to be the max for Vista-32. The imbalance is obviously not optimal, but I expect that the performance is better with 2 GB.

• Satellite L10-119 freezes after RAM upgrade

  My Satellite L10 is 4 years old. I wanted to update this change of RAM and HARD disk.
  I installed in RAM DDR1 SoDimm 1 GB PC-3200 (a unit) and used my computer for a few hours.

  But next time, he started to make mistakes and freeze or stop going to the blue screen.
  When I use DDR1 SoDimm 512 MB PC-2700 as a single unit, everything is OK.

  Will not track with * 1 Gb PC - 3200 * to use?

  Hello

  Case is clear!
  > When I use DDR1 SoDimm 512 MB PC-2700 as a single unit, everything is OK
  You used the not entirely compatible RAM modules!
  This is the reason why your laptop freezes!

  The fact is that your L10 can be upgraded to 1 GB RAM max, this means you need to use max 512 MB RAM module in a slot

  In addition, you can use the PC2700 200 pins (333 Mhz) DDR SODIMM modules and not of PC3200

• Satellite M115-S3094 freezes after RAM upgrade

  Hello

  I just added Corsair - 2 x 2 GB 200 PIN SODIMM DDR2 667 mhz memory to my laptop Satellite M115-S3094.

  Earlier I had 512 MB included with the laptop. The problem is that sometimes the computer starts and freeezes, none of the buttons work and I have to hold the button for 10 seconds to turn off and restart the computer. Sometimes I restart 2-3 times until it works.

  If there is any problem after commissioning, then I find myself using the laptop for hours like now and I won't have any problem until I restart.
  This all started when I upgrded memory. I tried to re install and it did not help.

  I would appreciate any help from anyone who has faced such a problem. I also have windows xp home edition.

  On the casablenca system, it shows 4 GB but used is only 2 GB. I even deleted one of the sticks, but I still have the same problem.

  Hello

  I think that the problem is without a doubt for new modules of memory installed
  Maybe the modules aren't 100% compatible or failed modules

  I guess the laptop ran correctly with the old module of RAM.
  This would confirm my hypothesis and I think you should test the specifications with the other s RAM

  Good bye

• After RAM upgrade disk HARD is not visible on Satellite A660 - 11M

  I have the Toshiba Satellite A660 - 11M.

  When I upgrade the RAM to 2 GB 2 Six gaeremynck Bios can't see the drive on Start menu please help

  And when you use original RAM modules only disk HARD visible again?

• Satellite P100-222: BIOS has been implemented - how to remove?

  Hello
  My brother you guys here asking for a help with a BIOS for Toshiba P100-222. (Pawel KillerPL)
  Is possible that after when I'll update of the Bios, the password will disappear?
  At the moment, I can't help cos I n t have laptop with me.
  I m sure that when I received the box with laptop was originally pack, and I put t 100% think that a certain shop touched the computer and the configuration password.

  Is it possible that someone in the factory could do something? Or the bios is failure

  See you soon
  Darek

  Hello

  Sorry, but I don't believe that a person of the factory has set the BIOS password.
  In addition the BIOS update will NOT delete the BISO password!

  Please Note: before you start the update of the BIOS to remove all passwords!
  Please first read the document about how to update the BIOS before you start the upgrade.
  The incorrect procedure may damage the motherboard!

  In addition if you n t the BIOS password you will need to contact Toshiba service partner in your country. There is no other possibility to remove the BIOS password.