All-in-one Deskjet 4645th: HP scanning takes a l-o-n-g time to load

Similar Questions

• All-in-one Deskjet 3632: Deskjet 3632 black ink not working not

  Hello

  I bought a HP all-in-one Deskjet 3632 and have set up on my laptop and phone. I scan a document was nice and feel it was ok, but the documents will not print using black ink. The first impression is rather a gray, and it seems that the color ink is the only one used. When you print word documents, none of the black ink is printing and only a small amount printed on the first page of test, where none of the letters are readable at all. The cartridges are new and in the same area as the printer. I did the fixes suggested without result, bar to buy a new cartridge which I hesitate to do what the budget is tight. Is there a fix that can be made, or will I have to resort to buying a new cartridge?

  Greetings @JamesMontgomery,

  Thank you access the Forums from HP Support for extra support! I see that you have problems printing in black. I will do my best to help you with this problem.

  I wasn't sure of what you have already tried. I would say the contacts of the cartridge cleaning manually, if you have not already: ink cartridge errors. Do not take into account the title.

  If you still have questions, please contact HP support: phone help worldwide.

  If this helps you to find a solution, please click on the button "accept as a Solution. If you wish, to say thank you for my effort to help, click on the 'Thumbs Up' to give me a Kudos. Please let me know the results. Good day!

• All-in-one Deskjet 4535: Deskjet 4535 AIO - Scanner function not supported in Linux Mint 17.3?

  I just bought the all-in-one Deskjet 4535. As I could not set up in Linux Mint 17.3 using hplip 3.15.2 and hplip-gui (it wouldn't appear in the peripheral installation dialog box), I used the utility printers (system-config-printer) and configured through CUTS. Even then, I was forced to use the driver 4510, as a driver of 4530 series does not seem to exist.
  After having done that, I can print it, but I can't use the "Simple Scan" scanner or any other utility to scan.
  I also tried to detect the network with xsane Analyzer, but it would not detect it.

  The only way to use the scanner is via the web interface, the all-in-one offers fortunately.

  Is there something else to try? The 4535 is supported under Linux or am I out of luck?

  Well, I went to hplip.sourceforge.net and I should have started with it in the first place. I solved the "problem" in downloading and installing the latest version of hplip that supports the 4535 entirely. The repo of Linux Mint has an outdated version of hplip and 4535 needs at least version 3.5.11 to work properly. Use the latest version fixed it immediately.

• HP Deskjet all-in - One 1051 registers as an all-in-one Deskjet 1050

  Recently bought a HP all-in-one Deskjet 1051.  After you have installed on the computer, he enrolled as a series of J410 Deskjet 1050 all-in-One.  I was wondering why.

  The numeric designation may vary according to the regional location or the retailer where the product was purchased. It can also link in how the product as the default value of different media formats, for example in North America with paper letter against Europe with A4 size. What it boils down to is that your printer is a Deskjet 1050 printer specific specialized series for a retailer or the country.

• HP All in One deskjet printer: X HP

  I have my HP all in one Deskjet Printer 3522 programmed to Eprinting from my cell phone wireless. I want to add a second computer to wireless network for Eprinting.  What are the steps to add the second computer.

  I had taken these measures as soon as possible.  As stated earlier I just needed to create the homegroup and get matching password on both computers. Once everything very easy, I determined the steps to follow. Printer works on both computers.

• All-in-one Deskjet F3335 allows to print "black only" on the profile of a user, no other

  Hello

  I have an annoying problem with my all-in-one Deskjet F3335.  I print a lot of documents on my printer.  Rarely do I need to print anything in color.

  Since the acquisition of a computer running Windows 7 (x 64), I was not able to print in "grayscale: black cartridge only" on my profile; the only option is 'high quality '. (see image below)  I thought it was a systemic problem until printining something user profile on my husband.  His profile will allow for me to select "black cartridge only."
  

  I tried to uninstall and reinstall the software and updates. This did not help.

  Hoping someone out there might have a suggestion for me on how to solve this problem (and stop wasting my color ink)! Thank you

  As I understand it, you can change the printer to print in only black and white on a profile, but not on the other on the same computer. Is this correct?

  This type of question usually depends on the permissions available on each profile. I would hazard a guess that your husband is a Director or that there privleges more than your own profile. I check to make sure that your account is set up as an administrator first.

  Secondly, I would also check the 'Advanced' tab, that sometimes you can change the settings for printing color black and white or grayscale.

  Let me know!

• All-in-one DeskJet 4625 and printing with Mac OS 10.9 Maverick

  I just installed Maverick - Mac OS 10.9 - and print is no longer a device all-in-one DeskJet 4625.  The computer and the device are communicate since I can see the ink levels, scanner and other functions, but it will not be printed.  I know that there is no problem with the printer, since I can print to it from another computer that has installed Mac OS 10.8.  Apparently, there is a need for an update of the printer driver.  Apple support is not an updated driver.  So, my question is hp will provide an updated driver?  And when?

  Hello

  Apple provide a updated driver.

  First restart your Mac, then click on the Apple icon and select software update, do not forget to install any available HP or Apple updates.

  If you can't print, try installing the package from the link below and check if this is useful, although it does not list the Mavericks, it should work on the operating system as well:

  http://support.Apple.com/kb/dl907

  Shlomi

• HP All In One Deskjet 3520 Microsoft Report Errorr

  HP All In One Deskjet 3520 error - I have Windows XP and every time I try to print (if, since an application, Internet or serigraphy, I get: XXX program has encountered a problem and needs to close - sorry for the inconvenience.) Send the report. I uninstalled and re-installed the printer twice - what happens?

  Hello

  Please perform the below mentioned steps that should solve the problem.

  1. click on the Start button on the computer.
  2. then click on Control Panel.
  3. then printers and faxes
  4. in the top left, click on add a printer
  5. click Add a local printer
  6. and while "Use an existing port" is selected, select "Virtual USB port... "and then click Next.
  "7. in the manufacturer list, select HP, then under the Deskjet 990 c printer list", then click Next and complete the wizard

  Now try printing. It should work.

  Kind regards
  Jabzi

  Give Kudos to say 'Thank you' by clicking on the White Star under my name.

  Click on 'accept as Solution' if it has solved your problem, while others may find it.
  I work for HP

• HP Deskjet Ink Advantage 2515: HP Deskjet Ink Advantage 2515 all-in-One Printer - software for scanning will not open

  I'm having the "HP Deskjet Ink Advantage 2515 all-in-One Printer" for more than a year now.

  I was previously using Windows 7 Ultimate and there is no problem.

  I did a clean install of Windows 7 SP1 Ultimate and then installed the HP software.

  The printer function works perfectly.

  The only problem is that the software of the Scanner itself does not open.

  Measures taken to correct.

  (1) uninstalled the drivers and the HP printing software. Rebooted the system and did a clean installation of the printer software and drivers who stood on the site of HP.

  (2) Ran "HP print and Scan Doctor", it says "Windows (WIA) Scan Error".

  Don't know what that means. Please help to guide how to correctly do the work of the Scanner Software.

  Thank you best regards &,.

  AJ

  Hi @AJ_Gem,.

  I see you have some analytical problems after doing a clean install of Windows 7 SP1 Ultimate. I would like to help you today.

  The WIA drivers are part of the Windows operating system.

  Run this made it Microsoft tool to see if it will solve this problem.

  Diagnose and automatically repair Windows files and records issues.

  I tabled this document, just to make sure they are the same ones you had checked.

  This document is to check the services of Windows Image Acquisition (WIA).

  Windows: Digitization of HP Software Does not open or Scan to a printer using a USB connection.

  Do not take into account the title.

  Proceed to Solution 3: check the Windows Image Acquisition (WIA) services.

  Temporarily, run Antivirus software and try to scan the image.

  If the problem persists, download and try to repair the WIA drivers. If you don't feel able to do these steps, you can contact the computer manufacturer or Microsoft to solve the error WIA.

  Back up the registry first.

  How to back up and restore the registry in Windows.

  Restore default startup for Windows Image Acquisition (WIA) Type.

  Please let me know the results.

  Thank you.

• PRI all-in-one HP Deskjet 3520: Deskjet 3520 printer all-in-one copy, but will scan and print computer

  This printer has always worked well... used only occasionally. The cartridges are fine.  Everything prints out fine computer, it scans very well, but does not copy.  Looks like it's copy, but shot out a blank page.

  Welcome to the HP community @273frustrated,.

  I understand that your 3520 Deskjet is no copy making more correctly however, you can print and scan without a problem. I will do my best to help! I might be far away but I suspect that there could be a problem with the printhead and it printing black ink. I say this because when you print from your computer, normally the ink colors mix to create a composite black, and when you print copies, it's only the black ink cartridge that is used.

  I want you to try a power reset and make sure that the printer is plugged directly into the wall, avoiding bars power and surge protectors. This ensures that the printer is full on.

  Turn on the printer.
  With the printer, unplug the power cord at the back of the unit.
  Unplug the power cord from the wall outlet.
  Wait at least 15 seconds.
  Plug the power cord into the wall outlet.
  Reconnect the power cord to the back of the unit.
  If the printer does not by itself, press the Power button to turn it on.

  Please also try the procedure described in this guide and get back to me with the results when you're done and I hope that we can reach a resolution!

  Testify of my answer by hitting the thumbs up below and press the button "accept as Solution" if I have you helped a resolution!

  I hope this helps you!

  • Printer prints a blank Page or doesn't print black or color ink for the series of e-all-in-one-HP Deskjet Ink Advantage and Deskjet 3520 printer

• All-in-One copy vs functions Scan

  What is the technical difference between the black copy function and the function of scan (Document to the printer setting) in HP-each when you print a black and white document?  Sometimes I have a HP Photosmart C6280 but imagine a similar software is used in most HP AIOs.  I use Windows XP SP3.

  I noticed that get copies of the printed large document when you use the black copy.  We see no difference between the original and printed copy.  But when I take the same document and use the scan function, the default setting of "Document to the printer" in the HP Solution Center / HP scanning software, white background of the document comes out of gray in the scanned image and the printed document.  Tweak the parameters of scanning doesn't seem to help.  The default color is 'levels of gray.  Change the color to "black and white" setting worse image, even after the threshold adjustment.  This is also true when scanning to a file.

  Curiously, Scanner of Windows XP and the Assistant camera produces images of a document scanned (no gray background) when you use the parameter "black and white picture or text.

  It seems that two different sets of software are used by HP for scanning and copying, even if the two functions use the same scanner. Would be nice if HP Scanning can be configured to produce the same document, black and white, scanning of the results produced by the black and the scanner and Camera Wizard copy function.  Did I miss something on the purpose or the configuration of the scan function? Did you have a good black and white, scanning of the success with the HP Solution Center / HP Scanning?

  Thanks for ideas or experiences!

  Mark

  I solved my problem with the help of HP technical support.  HP has a document entitled "Improvement of Scan quality," located at http://support.hp.com/us-en/document/buu00673

  It is found by typing "Improvement of the quality Scan" in the search box on the HP support & drivers page.  The document is the first result in the list.

  The second task of the document suggests recalibrate the all-in-one.  It was easy to make and done to correct my problem to get gray backgrounds on text scanned documents using the color to grayscale setting. The backgrounds are now in white, as it should.

  The lesson I have remove this: always turn the all-in-one front to put the document to scan on the glass.

  When you unplug the all-in-one to the power outlet and then plug it in again, the scanner to recalibrate automatically itself when it is turned on again with the power button.  If there is a document on the glass during calibration, recalibration may not work correctly, but you will not know.  All you know is that the scans you then will have quality problems!

• All-in-one Officejet 5610: function Scan lost after upgrade to Yosemite

  Lost the ability to analyze after upgrade, print, and copy works. Have already done everything suggested by Double-U-di in the Mac OS 10.10 post Yosemite and HP Printer Support posted on 30/10/2014: checking for updates Apple, printer removed from the queue, add printer back, reset the printing system, removed the HP software, repair disk permissions * manually installed HP printer drivers v3.0 and added to the queue printer. No change, printing & copying ok, but the scanner does not.

  During approval of the repair disk found a number of problems related to printing and presumably repaired, had more to do with the ' should be 80, group is zero ", but others as well.

  Anyone know what I can do, short of buying a new printer? I realize, it's a dinosaur - always attached via the USB port, but she worked just beautifully before the upgrade.

  Hello @DrBucky,

  Welcome to the Forums of HP Support!

  I understand that you are not able to scan from your HP Officejet 5610 all-in-One Printer to your computer Mac OS X 10.10. I would like to help you to solve this problem today. Thank you for all the troubleshooting steps you tried before reaching out for support. You have completed almost all of the recommended steps. However, the order in which the steps have been completed can cause some problems. Therefore, I will be having repeat you some of these measures to ensure that the appropriate driver is being used.

  Step 1: Reset the printing system and uninstalling the driver:

  It is crucial for the repairs we have a clean slate to work with. Therefore, I'll take you reset the printing system and Uninstall the drivers for your HP Officejet. Please click here for instructions on how to perform the reset and uninstall. Once the site opens, select the drop-down list for 'Mac OS X v10.6, OS X v10.7, OS X v10.8 and OS X v10.9'. Then, please follow the steps in the method 1 and method 2.

  Once steps have been taken, please proceed to the next step.

  Step 2: Check and repair your Mac disk permissions:

  It is very important to perform the audit before the repair. By running the check first, questions are found. Once all questions are found the repair process will correct these problems. By repairing just without checking first, questions may be missed.

  1. Open Macintosh HD and go to Applications
  2. Go to the Utilities folder
  3. Open disk utility
  4. Select the hard disk volume, you use (usually on the left)
  5. Select verify disk permissions
  6. Once this process is complete, select repair disk permissions

  Step 3: Manually install the driver Package:

  Please click here to manually download the package from Apple to HP v3.0 printer driversupdate. Once the site opens click on the download button at the top. Follow the instructions on the screen to install the driver package.

  Step 4: Check the Apple updates:

  1. Go to the Apple
  2. Select System Preferences
  3. Select software update
  4. Click update now
  5. Install your available updates
  6. Computer restart

  Step 5: Add the device:
  

  1. click on the menu of Apple , then Preferences System.

  2. click on Print & Scan and then check if the name of your printer appears in the printer list.

  3. click on the name of your printer, click the sign minus (), then remove the printer.

  4. click on the plus sign (), click Add a printer or a Scanner, click the name of your printer.

  5. click on the area of use or with the help of Print and then select the name of your printer on the shortcut menu. Ensure that the Officejet driver is selected.

  

  6. click Add to add the printer to the list.

  -Source

  Once your printer is properly added to, please try to scan the image. For instructions on the three supported methods of scanning without HP software please click here. The support document indicates that it is for Mac OS X 10.8 but the steps are the same for Mac OS X 10.10.

  Please let me know if a retry of the procedure described in this new order solves your problem of scan. Good luck!

• 3520 e - all - in - one deskjet Seri: download the software of the e-all-in-one series HP Deskjet 3520 for Windows Vista

  I can't find a software on the HP website for my e-all-in-one printer Deskjet 3520 so that I can scan documents in the form of PDF files.  At present, I can scan only to Microsoft Paint.  My original disk is damaged.  I contacted HP Support by phone and was informed that they are no longer supplied the software download for Windows Vista, that my computer is running.  I was told that there is a way around this, that can make me to level.  Unfortunately. After being moved several times and queued contiunous, I never got a solution.  Does anyone know where I can download the software online or I want Norman to do?

  Hi WYM1,

  Here is the LINK for your drivers for the Deskjet 3520 with the Windows Vista operating system.

  I hope that this solves your problem. Let me know!

  Thank you

• All-in-one Deskjet 2540: copy on Deckjet 2540 darkness setting

  How set you the dark copies on this printer.

  Hi @WJF1,

  Welcome to the HP Support forums.

  I understand that you are willing to adjust the darkness of copy on the printer all-in-one HP Deskjet 2540. I would like to help with that.

  The all-in-one printer HP Deskjet 2540 doesn't have a menu of copy that you can access to adjust the darkness of the copy. You can only set the number of copies. All documents are copied to print normal quality mode. You cannot change the quality of the printing mode when copying.

  You could, as a work-around, scanning the document or image to your computer and then use a third-party software, like Photoshop to darken the document or image. Here is a document that can help with scanning if necessary - using full function software scanning (Windows 8) HP.

  Please let me know if that solves the problem, or if you need assistance.

  In fact, if it helps you to find a solution, please click on the 'accept as Solution' and the 'thumbs up' buttons down below in this message.

  Thank you!

• all-in-one Officejet 5610: cannot scan

  I am trying to scan on my officejet 5610 all-in-one and I get an error insall for windows 8 or 8.1.  Help please.

  Hello

  Please download and run the following tool and post back all the error messages:

  http://ftp.HP.com/pub/softlib/software13/COL50849/MP-145514-6/HPPSdr.exe

  Kind regards.