All-in-One Photosmart C5150 problem with printing of emails

Similar Questions

• All-in-one Photosmart C310a: problem printing photosmart all-in-one C310a black ink

  Printer all-in-one Photosmart C310 just quit printing black ink cartridge.  I followed all the suggestions on help/support pages, including cleaning the contacts on the cartridge and print head (I do not soak the print head); making sure that nothing has been blocked; Unplug the printer for the moment came and reset; put in a new ink cartridge (the printer when it stopped printing in black, was still full of 1/3 to 1/2, according to the levels shown on the printer).

  It prints than a very altered, unreadable copy.

  I had this same problem about a year ago and find a solution on this web site, but cannot find anything about it now except for cleaning the heads, reset or to install a new cartridge.

  I tried to access this particular response from my old e-mail, but it is not related to whatever it is that has tackled the problem last year.  I desperately need this printer going again, please help.

  Thanks for CAhpUSER respondent

  I didn't really picture for help, but I will do my best to clarify what I can! This document 'Print head problem' or "Print head seems to be missing or corrupt" Message appears on the computer is some visuals that will make things clear with my explanation below!

  The part you are diving into the water is the ink nozzles. When the instructions say do not touch the ink nozzles, that means with the fingers/hands. It says to make sure that you use a fluffy towel/no paper to wipe the print head, so don't put fats from your contact with her skin. The electrical contacts are the part of the print faces head that looks like the back of the printer, just in some places grouped copper.

  I hope this helps clear things upwards a bit for you

• ENVY5530 e-all-in-one: still some problems with my printer ENVY5530

  My ENVY5530 at the age of one month all the in a has problems.  Firstly, it has not feed paper, then a HP Tec, I help and then it worked fine for a few weeks.   Later, same problem returned, paper does not feed, and now, I still have a new problem.  The document is printed, but the top is folded and torn.   However, from time to time, once a page prints perfectly and I am hopeful, but then the mistakes to come immediately.  I reinstalled, but the book looks always up before it feeds through. It is as if it is to be caught by something while it passes through.  Now of course the store (Best Buy) not exchange it because I went over the allocated period of 15 days.  Of course, I thought it was working fine up until 15 days have expired.  The most irritating thing is well, I can't count on it, what problem there at that time?  Maybe tomorrow it will work perfectly again.  Y at - it something I am doing wrong?  Has anyone else encountered this problem with the top of the paper coming out mutilated?  If I can't understand this point I'll have to return under warranty, HP will repair or send me a replacement.  But I would rather by this argument.  Thank you

  Hi Laylac,

  Thank you for your answer!

  I am pleased that the solution is an easy solution for you!

  Please consider tagging 2 Message like "Accept as Solution" so that someone else in the community who may encounter this problem can more easily find the solution.

  Best regards!

  "Please click the Thumbs up icon below to thank me for having responded."

• Photosmart all-in-one wireless B109n - problem with detection of the cartridges

  I just bought a Photosmart all-in-one wireless B109n. implementation proceeded without problems (including printing test photo).

  When I tried to use it later, he said that the cartridges were not detected.
  Strange thing is that when I take one of 4 cartridges, it says that one is missing. After you have added the last of them, he says that none of them are detected.

  Also, I need to re - enter the language and area whenever I turn it on. As if it's reset instead of make a cut...

  How this can be solved?

  Back to the store where I got it.

  They saw the same thing I had met and gave me a new without much fuzz

  The new works very well

• All-in-one Photosmart HP 3310: black printing in odd rows

  Hello

  I have had this printer for almost 6 years and never had a problem with it until this last week. My impression started out as below:

  

  As you can see, the colors are fine, but black seems to be coming out in lines. As the black cartridge was almost empty, I replaced it and received the same impression. I replaced that one (just in case the cartridge was defective) and received the same impression.

  My printer is out of warranty; I tried to clean the print heads and align the printer several times over the last week and nothing has changed. In fact, every print I do has the same meaning (even thickness, same color, same type [dotted, lined, etc.], in the exact same places every time, which is interesting.

  I tried the reset of the printer (pulling on the power cord for 15 to 30 seconds, and then reconnecting), alignment and clean the print heads in the printer menu, and then on the menu in my Mac, and I tried to get the number online (here and here), but came to nothing.

  I'm currently located in the United States, in Arizona. I understand that it is an older printer, so I may end up having to replace, but I was hoping someone might have a suggestion.

  Thank you

  ~ Leslie

  Hey @TheLastDuchess,

  Welcome to the Forums of HP Support!
  
  I understand that you are having problems of black print quality when printing HP Photosmart 3310 all-in-one printer. I first want to thank you for all the details you provide me in your message. I see you've already replaced the black cartridge twice, cleaned and aligned the print head several times and reset the printer nothing helps. Unfortunately at this time, it sounds like you have a defective system of the print head. The printhead in the unit model is not replaceable part. It reads the cartridges and ink to go on the control document. If this part in case of failure to replace the entire unit would be necessary. According to all the steps that you have already tried, at the moment, you have exhausted the troubleshooting steps. I don't want you to run one more cleans away from your printhead system because it uses no ink in order to rinse the ink for cleaning system. The rule is generally, if cleans 2-3 make no difference, not to go forward with more clean as you will just waste ink.

  At that time, I suggest that you contact our Technical Support by phone team to explore additional options.

  For Arizona, HP Technical Support can be reached at the: 1800-474-6836

  Good luck and happy holidays!

• Photosmart 5510 e - all-in - One: Photosmart 5510 - scanning with iMac does not work

  After you have reinstalled the SW printer via the home network, the scan function is not visible when I opened the printer on my iMac. After the first installation has worked well. Then I had to reinstall all the SW on my Mac, so I lost the first installation of my printer. What can I do?

  Hi @HWEB

  What happens when you try to scan? Do you have a message of error before or during transmission scan, or do the software is not open? Maybe you can not locate the software now, or the software cannot communicate with the printer.

  While I wait for you, if the problem occurs when you print from several programs, please follow the steps below and let me know the results of your efforts.

  Scrub / uninstall

  • Open the Applications folder > HP or Hewlett-Packard folder > Uninstall HP
  • Click continue, click on one of the printers in the list.
  • * Only perform this step if you have not all other HP printers.  Press and hold the Option, control and command, while now the three buttons.
    
  • Click Uninstall.

  Manually uninstall the remaining files potentially - I apologize in advance is not a fun task! I'll try to make it easy to follow. Some of the files described in the following steps can be found, if you can't find one of the files or folders on your computer, do not be alarmed.

  Move the files or folders to the Recycle Bin, drag and drop

  • Macintosh HD/Applications / /Hewlett-Packard folder
  • Macintosh HD/Library/Application Support /- delete all files and folders on HP/Hewlett Packard
  • In Macintosh HD/Library/Caches - delete all files and folders on HP/Hewlett Packard
  • Macintosh HD/Library/Documentation/Help /- delete all files and folders on HP/Hewlett Packard
  • MacintoshHD/Library/Frameworks/HPServicesInterface.framework
  • MacintoshHD/Library/Frameworks/HPSmartX.framework
  • Macintosh HD/Library/Image Capture / TWAIN Data Sources /HP Scan Pro
  • In Macintosh HD/Library/Image Capture/Scripts - delete all files and folders on HP/Hewlett Packard
  • In Macintosh HD/Library/Preferences - delete all files and folders on HP/Hewlett Packard

  Move the Macintoshloginwindow.plist on the desktop. NOTE: Does not delete the loginwindow.plist file during the manual uninstallation may cause uninstall be retained.

  • In Macintosh HD/library/printers/hp - delete the folder
  • In Macintosh HD/Library/StartupItems, drag the following files in the trash, IO HP and HP trap monitor
  • In Macintosh HD/users/username (this should have a symbol of a house next to him) / Library/Preferences, drag the following files to the Trash: * all files starting with com.apple.print, * all files starting with com.hp, * all files beginning with Hewlett-Packard, * files starting with HP or hp
  • In MacintoshHD/users/USERNAME/Library/printers, drag all all-in-one printers listed here in the trash.
  • Drag the icons of HP from the dock and drop it onto a blank space on the desktop. The icon will disappear.

  Close all open windows.
  Turn it back on.
  Empty the trash.

  Reset the printing system

  1. Click on the Apple icon ( ), then click on System Preferences.

• OfficeJet 5470 e-all-in-one: Subscriber instant - problem with #62 color cartridge - Cyan Ink only

  I just installed a new color cartridge and our copies look right.
  
  I aligned the printer and then cleaned them (the two cleanings) and Print quality Diagnostic report shows nothing in the column "Cyan".
  
  Is it possible that the cartridge is defective?
  
  Thank you very much for your help!

  Hi @fiveinthetree,

  I understand that you are having some print quality problems with your HP Officejet 5740. I'll be happy to help you.

  It is possible that the cartridge you received is defective, however, there are some troubleshooting, you need to try before you can replace as defective cartridge.

  I recommend contacting instant ink 1-855-785-2777 for support in real time with an agent. If they determine that the cartridge is defective, they can help you with the replacement.

  If this help will testify of my answer by pressing the 'thumbs up' below, or click on the button "Accept as Solution" if I helped you reach a solution.

  I hope this helps and have a nice day.

• All-in-one Photosmart B109n - won't print blackcopies

  For some time I have used this printer since black prints only and did not replace the other ink cartridges, because they are empty. I replaced the black cartridge several times and have been perfectly happy with print jobs that I need to do.

  I just replaced the black cartridge again, but I now get blank pages when I try to print jobs. Despite this the printer tells me that the cartridge is full.

  The reason would be that I have have not replaced the other cartridges, or is there something else that could be causing the problem?

  In other words, is it likely that I will be able to solve this problem simply by replacing the other ink cartridges?

  Your advice would be welcome.

  Thank you very much.

  Tony.

  I'm happy here, the printer working once more, sometimes the printer must sit idle to allow ink to zero on its own system. If you have a free moment and would mind not mark the post with troubleshooting as the Solution, this will allow the other members of the community to easily locate

  Thank you

• Dell all-in-one 946 Communication problem with the printer!

  Hey guys I have a Dell 946 and his works very well and know all of a sudden it keeps saying 'Cannot communicate with the printer' whenever I try to print. I unplugged the USB cable and power cable and put them back in and also restarted my computer, but I had no luck. Someone help me please! I need to fix this problem I have a college full of paper!

  
  

• HP Photosmart C6280 all-in-One: Photosmart C6280 does not print after trying to clear the error library/startupitems

  I had a Library/Startupitems error since update my software HP a couple of years ago.  Trying to finally solve this problem myself, the HP site suggested to remove and reinstall the software.  There are no active link in the pages of HP support for a download.  I found a C6200 series pilot online, I have installed, but now I can't print anything but a test page, and I still have the error Library/Startupitems.  As it is, I can not even find this file to fix the error.

  Hi @Eric_V67

  I don't know exactly what causes this error, but I think it has something to do with permissions of drive Macs. Please, try the following steps and let me know the results of your efforts;

  Reset the printing system

  1. Click on the Apple icon ( ), then click on System Preferences.

• Hi all, any one side heating problem with iphone 6 s while using Skype and games?

  Dear all apple users,.

  One is facing iphone 6 s heating issue while using Skype video calls but also play games with only five minutes of time?

  Playing games is an intensive activity that uses a lot of power.   Where the accumulation of heat and the regular need to reload.

• Photosmart 6510 e - All - In - One: Photosmart 6510 does not print black clearly

  My printer prints everything but black clearly; I put in a new cartridge and run the head cleaning nothing works. Is it possible to clean the head for black to hand? Help! I have things that I need to print!

  Thank you! It was easier and less likely to damage if I just bit the bullet and replaced it! I may need your help in the future with the HP OfficeJet Pro 8710 - stay tuned

• 7520 all-in-one photosmart HP: 7520 with Mac Yosemite

  After the upgrade to OS 10.10.1 (Yosemite), printer HP 7520 don't wake mode not sleep on its own.  The auto sleep function OFF.  Latest HP (V.3) printer drivers are installed.

  Hi @kizzme,

  Welcome to the HP Forums!

  How the printer is connected to the Mac?

  Even if the printer is not connected, should he still have questions?

  When you upgraded to 10.10 you run an update on the printer itself as well?

  If you press anything on the printer it wakes up or have you turn off and on again?

  Let me know that information and I'll throw an extra eye in the things for you

• HP all-in-one-22-3002nf: problems with the Realtek drivers

  For the last three days my computer beeps at startup, beeps short and long beeps. It starts then, but I don't know that it should not be of these noises.

  The wizard has recommended several updates, that everything I installed.

  However, two Realtek drivers I have installed several times keep insisting that they should be downloaded and installed.

  The drivers are:

  64-bit Realtek PCIE Card reader driver (5229)

  and

  Realtek RTL8723 and RTL 81188EE 802.11 b/g/n Wireless Lan Drivers

  Please can someone advise what may be the problem, why these two drivers keep asking to be installed during the installation has already been confirmed, and why the computer will beep.

  Thanks for any help.

  It is always good to unplug the PC, the power of the exe that can elapse after sometimes can cause components to fail or function of evil

• HP All in One Photosmart C7280 scan issue with Snow Leopard

  Hello

  I bought my wife a new cool Mac mini. So it comes with Snow Leopard. We use it for our activities with an HP printer all in one Photosmart C7280. Unfortunately the scanner does not work. I did the mistack to install HP driver from the HP website and read after documentation of the HP Web site (probably like all users). So I decided to completely re-installed the machine (as it was new) and follow the installation procedure for HP who, to say that the pilot is coming up with Snow Leopard. After the new re - install, so I installed 10.6.1 patches and last HP driver from the site Web Apple as mentioned in the forum. (version 2.2)

  The printer is correctly detected, but there is no way mak it work the scanner on HP procedures. The scanner is not recognized at all, and the printer configuration window is not appearing the scanning tab as it is supposed to. It seems that the scan part it does not work in one.

  We love HP printer and it will be great to see it fixed.

  My network configuration is very simple:

  -192.168.0.176 is the IP address of the HP printer with 255.255.255.0 netmask

  -192.168.0.106 is the MacMini (3.1) IP address mask subnet even

  All connected using a router D-Link (5 ports).

  Printer/scan function works perfectly on our other Mac systems that are under Leopard. I tried to install Leopard on the new mac mini, but the installation DVD that we have (10.5.4) does not start successfully on the machine. We are so stuck.

  Any help really appreciated

  Jean-Marie

  Hello

  Good news, it worked. But I think that the problem came from the D-Link router that I used. Upnp has been set to allow, and it seems he mistook the discovery of the device. I proceed to turn off and the live showed you me overdrawn the printer on the network. I installed it, and the scanner has been recognized.

  If I turned my back to Activate Upnp, the scan function is dead. Thus, it probably is a problem of compatibility between the leopard to snow and this Protocol. What is strange, is that our whole system of leopard work with upnp enable or disable.

  Anyway thanks a lot for your help!