alphanumeric error on c5580 all-in-one.

Similar Questions

• C5580 all-in-One Photosmart Pr: c5580 print usually

  I have a Photosmart C5580 all-in-One printer stopped printing from my laptop for about a month before, i.e. December 2014.  An error flashed, but it disappeared before I could read it.  It will print

  When you copy something and it will show a diagnostic page that makes no sense for us.  We bought a new

  cord for it but that made no difference. The computer is a HP Pavilion dv7 laptop. AMD

  Turion (TM) X 2 Dual - Core Mobile RM-70 until it works very well.  Thanks for any help you can give

  Hello @SunnyCat11 and welcome to the Forums of HP!

  I see that you are having problems printing.  I would like to help!

  I recommend you to perform a power reset the printer.  Unplug the power cord from the printer and the power outlet, then wait 60 seconds. After 60 seconds, plug back in the printer. Make sure that you connect the printer directly to a wall outlet. Make sure to bypass any surge protector or power bar.

  I also run the following updates:

  Utility software update from HP

  Critical update

  Critical update to correct a PC Printer Communication issue

  Critical update for HP

  In addition, these pages are print after the document you copied, or instead of?

  Good luck and please let me know the results of your troubleshooting operations. Thanks for posting on the HP Forums!

• Quality of printing on my HP Photosmart C5580 all in one is not very good

  Hello

  My parents have a HP Photosmart C5580 all-in-one printer.  Their old computer was running XP and the printer printed beautiful photo (using HP Photo paper).  The recently buy a new computer that is running Windows 7.  They called me after that that they got rid of their old computer XP.

  The problem is that the HP C5580 is no longer made a good job of photo printing.   I have been in their house and they owe me that the use of the printer to print then we have printed a new photo to the printer (which was horrible).  I then downloaded the latest drivers for Windows 7 from HP, installed and reprinted the image.

  The XP computer disappeared, so I've no idea what program they used to print photos.  I used Picas (latest version) to view and print the pictures on Windows 7.

  The new photos are very washed out. They remind me of the photos printed on the ink jet printer initially on plain paper.  They are not photographs.

  Anyone have any ideas to improve the quality of the photos?  If it is a better program than Picasa we should use to print the photo?  Is there a way to caliabrate the printer?

  Thank you

  Dennis

  Hi Dennis you have posted on the discussion of the ePrint/Mobile Forum so I'll ask that your post moved to the Printing Board Issues & troubleshooting in the hope that you receive relevant responses. In the meantime, I suggest that you check the ink levels in the supplies in the printer and print a diagnostic. You should be able to get it out in the printing software HP you have downloaded or directly from the front panel of the printer. If ink, levels are low in all of the test color cartridges to see if that solves the look "washed out" prints.

  Good luck.

• My c5580 all in one printer has a broad black band

  My c5580 all-in-one printer copies or scans have a broad black band along the right side of the paper when the scan or copy.  The scanner glass is clean and it seems that all the scanner bar lights are lit.  The printer prints fine fron the computer.  Scanning the computer shows the same black line

  is broken - is there a solution?

  Dennis811

  dennis811,

  I'm sorry to hear that it worked for you. If you need help with your options maintenance that you can join to support at 800-474-6836. If you do not live in the United States / Canada region please click the link below to get help from your region number. http://goo.gl/kQDB - for available options. Let me know if you have any additional questions.

  Good luck!

• C5580 all-in-one disconnects - error on screen numbers a

  Computer desktop running XP, all updates installed. Installed printer 2009, ran well until the fall of 2013. Running print and scan of the doctor. All OK is displayed.

  When get us the printer running and leave it on standby or turn it off for the night, it will often not be recognized by the computer when it is used again, but sometimes will start up to flashing lights and numbers on the screen (B8159A32) or (B0226500). Often the message say disconnect power and wait 10 seconds before connecting again.

  It only connects by USB cable to the computer. Changed the cable and the connected ports to different on the computer. Has made no difference... HELP... dmac948

  Hi dmac948,

  I understand that you have a Photosmart C5580 which is giving you a few numbered odd and disconnection errors. I will definitely do my best to help you with this.

  Numbered errors that you see are errors of the firmware. They are basically indicating that the brain of your printer is on his way out the door. There is nothing to do with this well because there is no update available for your printer firmware. The only thing I can suggest is to make sure your printer is connected directly to a wall outlet to make sure that the printer has all the power, he needs.

  Once arrived at the point where it is not possible to deal with this issue any more, I would say that you call HP Technical Support for your sector and inquire about trade and trade program.

  Hope this helps, have a nice day!

• Msg of error for HP printer C5580 all-in-one

  Have had printer for over a year.  Printed, copied and scanned without any problems until 3 weeks ago.  Product B808268C error msg appears.  Followed the instructions in the online forum.  Initially, it appeared that he would solve the problem, but then an another error msg appeared on the screen of the product... BA01866E.  Have uninstalled and reinstalled the software of the 2 X product using the disc that came with the product.  no luck.  Have iMAC with OS X 10.5.  Can't make it work.  Another thing.  The icon "power on" appears on the display of product above the msg of error USB cable to help to connect the printer to the computer.   Can you provide a resolution?  Please advise and thank you.

  You get the error code is caused by an error in the firmware of the printer. In this case, it's not much, you can do. The document below the link a few things you can try. If this does not work, you will need to replace the printer.

  An alphanumeric Code (example: ' 0 x 'r' C2...) ") displays on the front panel when printing:
  http://goo.GL/X0BZq

• 'Invalid WEP key' error on 7410 All in one wireless set in place

  My 7410 has been connected wireless for more than a year, but I just installed a new router (Linksys N600) and cannot get the connection Wireless upward.  All other wireless devices are connected to the new router.  Using WPA2-PSK [AES] security on the router.  Using Setup on the front of the printer and it is fine network SSID location.  But only allowing a WEP key and give me the error code whenever it is entered.  Have tried to change the length of key on router to 5 or 13 characters and also tried 10 HEX digits.  Have powered turn off/on the printer and reconstituted on network settings.  No luck with anything.  The Cisco router I had already installed was also a N Router - no problem of the 7410 wireless connection but try exchanged due to too many lost connections.  Any advice?

  I don't think that this printer supports WPA2.  Try WPA.

• Print CD C5580 all-in-one

  I bought a C5580 for CD printing, but discovered that CD labels creator software bundled with the suite Roxio Media Creator 9 doesn't have this printer as a model of care (they only have Epson printers). Does anyone know of a good label, creation of software (not HP) which supports the C5580 directly? Or can someone tell me if the new version of Roxio Media Creator (creator 2009) is supported by this printer.

  I find the HP software to be too limited - I can not move the text as I can on Label Creator.

  Thank you!

  Not an expert but as help and solve problems...

  Evan
  Vancouver WA

  Looking at the suggestions on this forum, I tried Sure Thing CD Labeler 5 - you can get a full 15 day trial recommended and the full license is quite reasonable - 25, $00. I printed just successfully on a CD - R with MP3s on it. I think I will buy this software.

  Maybe HP can reach agreement on a further reduction in the purchase of a C5580?

  Evan

• Printer (Photosmart C5580 all in one will not accept the #75 color cartridge)

  Screen on the printer says "cartridge in the slot on the left is not intended for use in this printer.  Remove and replace.
  It's the exact same cartridge as empty.  There is a flashing yellow light next to the sign +.  I tried
  unplug and plug in again.  I put the old cartridge in.  I turned printer off and back on.
  Nothing seems to help.

  Any suggestions will be appreciated

  Hello

  As it is a hardware problem, I suggest you contact HP support for assistance on this issue:

  http://WWW8.HP.com/us/en/contact-HP/contact.html

  It may be useful

• HPPhotosmart C5580 all-in-one, color coating, spilling

  What are the causes of color coating on photos? It is not the cartridge. Automatic test is OK.

  Help, please.

  Heinz

  This problem is solved, it was the bad printing paper. I bought HP paper, end its OK now.

• Photosmart c5580 all-in-one doesn't have the option scan to Word

  I'm trying to scan a document to edit in Word. I don't have the option to do so. I think it's maybe because I reinstalled from the Web site because I can't find my CD. Is it possible to add this option of detection as text instead of an image?

  Thank you, Helen

  The OCR application is not included in version 12. Version 11 is on the cd and 12 that you can download.

  You can download the ocr for version 12 below application

  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=OJ-72836-2&LC=en&DLC=en&cc=us&product=3575276&OS=2093&lang=en

• Is it necessary to have the charge of all-in-One HP C5580 at startup?

  Good evening

  I am a new owner of a HP Photosmart C5580 all-in-One Printer-Scanner-Copier and a smiling too I might add.

  Previously, I had a HP Photosmart 1315 printer who served me well until I decided that I would also a scanner and a copier.

  However, I always try to find out if there is a way I can access this new Photosmart C5580 manually just at the moment where I want to use it without having to have put it at Windows startup?

  My big problem is when I try to scan something and save it to the computer.  I can't do it right now unless I greeted the HP Digital Imaging Monitor start automatically at Windows startup.  Is there a way to get around this?

  I'm running Windows XP, SP3, completely up to date with IE7 completely up to date too.

  Thank you and best regards,

  2harts4ever

  "... enough Said." Keep smiling because I'm smiling too! »

  Yes. I recommend you do as it CAN lead to complications with the connection to the printer if you try to play with it. You can turn on the printer itself AFTER the startup of your PC, but don't mess with the software or the SUN.

  You may, however, experience from the DIM manually after starting the PC, or let it start automatically and choose how you want to use it according to the results and behavior. You can always get back to us here for ANY other help.

• "Print cartridge missing or not detected" says my Photosmart C4250 of HP all-in-One error

  My all-in-one HP Photosmart C4250 error is 5 years old.

  This week, he stopped printing with a message saying that it could not detect the ink cartridge.  The cartridge was low, but non-empty, so I asked a geek friend to take a look but no problem was found.  Today, I just bought and installed a new cartridge.  Still will not work.

  This printer has been reliable so far.  Any ideas?  I am unemployed and a new printer is certainly NOT in my future.

  Thank you!

  Here a link to a document that addresses the error message that you receive on this printer model. It will provide a troubleshooting to try in an attempt to clear the error message. If we filled all solutions in the document and continue to receive the error message, would seek to substitute.
  
  If you are still in warranty, HP can replace the printer without cost to you. I'll link the information to get in touch with them below. The link takes you to a form to fill out. Once you fill it and she is treated, it will give you the printers warranty information, a file number and the phone number to call.
  
  HP Technical Support call case form:

  https://h10025.www1.HP.com/ewfrf/wc/phoneInput?cc=us & DLC = in & LC = in & Product = 5061082

• HP psc1350 all-in-one: check printer cartridge error will not clear

  In the middle of printing of the check print cartridge light error came.  The cartridges are faily new and there has been no discoloration.  I tried to remove and reinsert the cartridges, disconnect the printer from the computer, disconnect the printer, press Cancel.  Error will not clear

  Hey @dennisc10,

  Welcome to the Forums of HP Support!

  I understand that you have some problems with an error light on your PSC 1350 all-in-one printer. I can help you with that.

  To start, make sure that the printer is plugged directly into a wall outlet, not a surge protector. Once done, this document explains How to solve the blinking lights on the printer.

  If after following the above you still can not clear the error, the printer needs to be replaced. You can contact the HP Support by clicking on this link and fill out the form below to discuss the options based on your warranty.

  Please let me know the results after following the above. If you are able to solve the problem or reach some resolution, click on accept solution. If you appreciate my help, please click on the thumbs up icon. The two icons are below this post.

• HP Photosmart C6280 all-in-One: receives the error message, oxc05d0082, motor pump at a standstill. I have a C6280.

  Screen error bedxc05doo82, engine of the pump at a standstill.  Press the icon (inability to recognize or describe).   How to fix it, or can I still fix this?

  Hello @Munga,

  Welcome to the forums of HP.

  I understand that you have found an error ' 0xc... "on your printer.

  I would like to help.

  Try to go through the following document.

  ' Printers HP - "Problem with print head", "printer failure," 'Ink system failure,' or a ' 0 x ' r a 'C2 '.... "Displays Error Message

  On the off chance that you meant 'choose the motor at a standstill', please see the following document.

  HP all-in-One printers - 'Out of Paper' error and the printer is not get paper

  If you need other assistance please let me know.