ALT + F1: Cannot load the iommu driver

Hello

I need ssh access to my box of esxi. When I go in the console, I have this message that appears and cannot do anything except to return to the main screen:

Could not load the iommu driver. VT - x, vt - d are enabled in the BIOS...

Anyone can help to ^.

Thank you.

ALT + F1 type is not supported and Enter. Enter the root password.

Tags: VMware

Similar Questions

  • Windows cannot load the device driver for this hardware (HL-DT-ST DVDRAM GH40F SCSI CdRom Device) because the driver may be corrupted or missing. (Code 39)

    Original title: the answer useful?

    Help, please! Windows cannot load the device driver for this hardware (HL-DT-ST DVDRAM GH40F SCSI CdRom Device) because the driver may be corrupted or missing. (Code 39)

    Hello

    Code 39 means that the driver is corrupted or missing.

    Please make all below even if you have done some before as it is often the set of operations which solves
    the question.

    Try this - Panel - Device Manager - CD/DVD - double-click on the device - driver tab - click
    Update the drivers (this will probably do nothing) - then RIGHT click the drive - UNINSTALL - REBOOT
    This will refresh the default driver stack. Even if the reader does not appear to continue below.

    Then, work your way through these - don't forget the drive might be bad, could be a loose cable or
    slight corrosion on the contacts (usually for a laptop) and other issues.

    Your CD or DVD drive is missing or is not recognized by Windows or other programs
    http://support.microsoft.com/kb/314060 - a Mr Fixit

    Try this fix manually if the Fixit 314060 does not work
    http://www.pchell.com/hardware/cd_drive_error_code_39.shtml

    Your CD or DVD drive is missing or is not recognized by Windows or other programs-
    a Mr Fixit
    http://support.Microsoft.com/kb/982116

    The CD drive or the DVD drive does not work as expected on a computer that you upgraded to Windows Vista
    http://support.Microsoft.com/kb/929461

    When you insert a CD or a DVD, Windows Vista may not recognize the disc
    http://support.Microsoft.com/kb/939052

    Your CD or DVD drive cannot read or write media - A Mr Fixit
    http://support.Microsoft.com/GP/cd_dvd_drive_problems

    CD/DVD drive does not appear in Windows Vista, or you receive this error during the installation of Windows Vista after booting from the DVD (AHCI)
    http://support.Microsoft.com/kb/952951
    Drive CD - R or CD - RW Drive is not recognized as a recordable device
    http://support.Microsoft.com/kb/316529/

    Hardware devices not detected or not working - A Mr Fixit
    http://support.Microsoft.com/GP/hardware_device_problems

    Another possibility is that the cables are loose. Remove ALL power, then make sure that the cables in both
    ends. Remove and replace, do not just tight. For laptops, you can often clean power and
    contacts data with a pencil eraser.

    --------------------------------------------------------------

    Also check with your system manufacturer to see if there are any updated drivers for your DVD. Or even if it
    are you can reinstall the 'old'. Many use Windows default drivers however some special aura
    ones. Also check the website of the manufacturer of the car.

    Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
    http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

    I hope this helps.

    Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

  • Cannot load the class driver: com.mysql.jdbc.Driver

    Hello

    I am new to Oracle solutions and I am trying to deploy a simple ADF Application that retrieves data from a mysql database, I already set up the mysql connector in libraries, but when I try to deploy the application, the following message appears for me:


    Using the 7101 port *.
    C:\Users\FBELLUCO\AppData\Roaming\JDeveloper\system11.1.1.5.37.60.13\DefaultDomain\bin\startWebLogic.cmd
    [waiting for the server to complete its initialization...]
    .
    .
    Arguments of memory in JAVA: - Xms256m-Xmx512m - XX: CompileThreshold = 8000 - XX: PermSize = 128 m - XX: MaxPermSize = 512 m
    .
    Start mode of WLS = development
    .
    CLASSPATH=C:\Oracle\MIDDLE~1\ORACLE~1\modules\oracle.jdbc_11.1.1\ojdbc6dms.jar; C:\Oracle\MIDDLE~1\patch_wls1035\profiles\default\sys_manifest_classpath\weblogic_patch.jar; C:\Oracle\MIDDLE~1\patch_jdev1111\profiles\default\sys_manifest_classpath\weblogic_patch.jar; C:\Oracle\MIDDLE~1\JDK160~1\lib\tools.jar; C:\Oracle\MIDDLE~1\WLSERV~1.3\server\lib\weblogic_sp.jar; C:\Oracle\MIDDLE~1\WLSERV~1.3\server\lib\weblogic.jar; C:\Oracle\MIDDLE~1\modules\features\weblogic. Server.modules_10.3.5.0.jar; C:\Oracle\MIDDLE~1\WLSERV~1.3\server\lib\webservices.jar; C:\Oracle\MIDDLE~1\modules\ORGAPA~1.1/lib/Ant-all.jar; C:\Oracle\MIDDLE~1\modules\NETSFA~1.0_1/lib/Ant-contrib.jar; C:\Oracle\MIDDLE~1\ORACLE~1\modules\oracle.jrf_11.1.1\jrf.jar; C:\Oracle\MIDDLE~1\WLSERV~1.3\common\derby\lib\derbyclient.jar; C:\Oracle\MIDDLE~1\WLSERV~1.3\server\lib\xqrl.jar
    .
    Path = C:\Oracle\MIDDLE~1\patch_wls1035\profiles\default\native; C:\Oracle\MIDDLE~1\patch_jdev1111\profiles\default\native; C:\Oracle\MIDDLE~1\WLSERV~1.3\server\native\win\32; C:\Oracle\MIDDLE~1\WLSERV~1.3\server\bin; C:\Oracle\MIDDLE~1\modules\ORGAPA~1.1\Bin; C:\Oracle\MIDDLE~1\JDK160~1\jre\bin; C:\Oracle\MIDDLE~1\JDK160~1\Bin; C:\Program Files (x86)\SenchaSDKTools-2.0.0-beta3; C:\Windows\System32; C:\Windows; C:\Windows\System32\Wbem; C:\Windows\system32\WindowsPowerShell\v1.0\; C:\Program Files\Intel\WiFi\bin\; C:\Program Files\Fichiers Files\Intel\WirelessCommon\. C:\Program Files (x 86) \Microsoft ASP.NET\ASP.NET Web Pages\v1.0\; C:\Program Files\Microsoft SQL Server\110\Tools\Binn\; C:\Program Files (x86)\GtkSharp\2.12\bin; C:\Program Files\Intel\WiFi\bin\; C:\Program Files\Fichiers Files\Intel\WirelessCommon\. C:\Oracle\MIDDLE~1\WLSERV~1.3\server\native\win\32\oci920_8
    .
    ***************************************************
    * To start WebLogic Server, use a username and *.
    * password assigned to an administrator-level user. For *.
    * server administration, using the WebLogic Server *.
    * the http://hostname:port\console console *.
    ***************************************************
    from weblogic with the Java version:
    Java version "1.6.0_24".
    Java (TM) SE Runtime Environment (build 1.6.0_24 - b50)
    Java Client VM (build 19.1 - b02, mixed mode)
    WLS starting with line:
    C:\Oracle\MIDDLE~1\JDK160~1\bin\java-client-Xms256m-Xmx512m - XX : CompileThreshold = 8000 - XX : PermSize = 128m - XX : MaxPermSize = 512m-Dweblogic.Name=DefaultServer-Djava.security.policy=C:\Oracle\MIDDLE~1\WLSERV~1.3\server\lib\weblogic.policy-Djavax.net.ssl.trustStore=C:\Oracle\Middleware\wlserver_10.3\server\lib\DemoTrust.jks-Dweblogic.nodemanager.ServiceEnabled=true - Xverify : aucun-da-Dplatform.home=C:\Oracle\MIDDLE~1\WLSERV~1.3-Dwls.home=C:\Oracle\MIDDLE~1\WLSERV~1.3\server-Dweblogic.home=C:\Oracle\MIDDLE~1\WLSERV~1.3\server-Djps.app.credential.overwrite.allowed=true-Dcommon.components.home=C:\Oracle\MIDDLE~1\ORACLE~1 - Djrf.version=11.1.1 - Dorg.apache.commons.logging.Log=org.apache.commons.logging.impl.Jdk14Logger-Ddomain.home=C:\Users\FBELLUCO\AppData\Roaming\JDEVEL~1\SYSTEM~1.13\DEFAUL~ 1-Djrockit.optfile=C:\Oracle\MIDDLE~1\ORACLE~1\modules\oracle.jrf_11.1.1\jrocket_optfile.txt-Doracle.server.config.dir=C:\Users\FBELLUCO\AppData\Roaming\JDEVEL~1\SYSTEM~1.13\DEFAUL~1\config\FMWCON~1\servers\DefaultServer-Doracle.domain.config.dir=C:\Users\FBELLUCO\AppData\Roaming\JDEVEL~1\SYSTEM~1.13\DEFAUL~1\config\FMWCON~1-Digf.arisidbeans.carmlloc=C:\Users\FBELLUCO\AppData\Roaming\JDEVEL~1\SYSTEM~1.13\DEFAUL~1\config\FMWCON~1\carml-Digf.arisidstack.home=C:\Users\FBELLUCO\AppData\Roaming\ JDEVEL~1\SYSTEM~1.13\DEFAUL~1\config\FMWCON~1\arisidprovider-Doracle.security.jps.config=C:\Users\FBELLUCO\AppData\Roaming\JDEVEL~ 1\SYSTEM~1.13\DEFAUL~1\config\fmwconfig\jps-config.xml-Doracle.deployed.app.dir=C:\Users\FBELLUCO\AppData\Roaming\JDEVEL~1\SYSTEM~1.13\DEFAUL~1\servers\DefaultServer\tmp\_WL_user-Doracle.deployed.app.ext=\--Dweblogic.alternateTypesDirectory=C:\Oracle\MIDDLE~1\ORACLE~1\modules\oracle.ossoiap_11.1.1,C:\Oracle\MIDDLE~1\ORACLE~1\modules\oracle.oamprovider_11.1.1-Djava.protocol.handler.pkgs=oracle.mds.net.protocol-Dweblogic.jdbc.remoteEnabled=false-Dwsm.repository.path=C:\Users\FBELLUCO\AppData\Roaming\JDEVEL~1\SYSTEM~1.13\DEFAUL~1\oracle\store\ GMDS-Dweblogic.management.discover=true-Dwlw.iterativeDev=-Dwlw.testConsole=-Dwlw.logErrorsToConsole=-Dweblogic.ext.dirs=C:\Oracle\MIDDLE~1\patch_wls1035\profiles\default\sysext_manifest_classpath ; C:\Oracle\MIDDLE~1\patch_jdev1111\profiles\default\sysext_manifest_classpath weblogic. Server
    < 19/08/2012 BRT 16h40min52s > < Info > < security > < BEA-090905 > < disabling CryptoJ JCE provider auto-intégrité for better startup performance. To allow this control, enter - Dweblogic.security.allowCryptoJDefaultJCEVerification = true >
    < 19/08/2012 BRT 16h40min52s > < Info > < security > < BEA-090906 > < change the default Random Number Generator in RSA CryptoJ of ECDRBG to FIPS186PRNG. To disable this change, specify - Dweblogic.security.allowCryptoJDefaultPRNG = true >
    < 19/08/2012 BRT 16h40min53s > < Info > < WebLogicServer > < BEA-000377 > < ہ WebLogic Server Java hotspot Client VM Version 19.1 - b02 Sun Microsystems Inc. >
    < 19/08/2012 BRT 16h40min53s > < Info > < management > < BEA-141107 > < Version: WebLogic Server 10.3.5.0 Fri Apr 1 20:20:06 PDT 1398638 2011 >
    < 19/08/2012 16h40min54s BRT > < opinion > < WebLogicServer > < BEA-000365 > < server status changed initially >
    < 19/08/2012 BRT 16h40min54s > < Info > < WorkManager > < BEA-002900 > < self-adjusting Initializing of thread pool >
    < 19/08/2012 16h40min54s BRT > < opinion > < LoggingService > < BEA-320400 > < C:\Users\FBELLUCO\AppData\Roaming\JDeveloper\system11.1.1.5.37.60.13\DefaultDomain\servers\DefaultServer\logs\DefaultServer.log log file will be rotated. Reopen the log file if stopped tailings. This can happen on some platforms such as Windows. >
    < 19/08/2012 16h40min54s BRT > < opinion > < LoggingService > < BEA-320401 > < log file was shot in C:\Users\FBELLUCO\AppData\Roaming\JDeveloper\system11.1.1.5.37.60.13\DefaultDomain\servers\DefaultServer\logs\DefaultServer.log00005. Log messages will continue to be logged in C:\Users\FBELLUCO\AppData\Roaming\JDeveloper\system11.1.1.5.37.60.13\DefaultDomain\servers\DefaultServer\logs\DefaultServer.log. >
    < 19/08/2012 16h40min54s BRT > < opinion > < Log Management > < BEA-170019 > < C:\Users\FBELLUCO\AppData\Roaming\JDeveloper\system11.1.1.5.37.60.13\DefaultDomain\servers\DefaultServer\logs\DefaultServer.log server log file is opened. All events in the log server-side will be written to this file. >
    < 19/08/2012 16h40min57s BRT > < opinion > < security > < BEA-090082 > < security initialization using security realm myrealm. >
    < 19/08/2012 16h41min00s BRT > < opinion > < WebLogicServer > < BEA-000365 > < server changed to STANDBY status >
    < 19/08/2012 16h41min01s BRT > < opinion > < WebLogicServer > < BEA-000365 > < server status changed initially >
    < MessageLocalizationHelper > < getLocalizedMessage > O recurso pacote 'oracle.jrf.i18n.MBeanMessageBundle_pt_BR' com a chave 'oracle.jrf.JRFServiceMBean.checkIfJRFAppliedOnMutipleTargets' nao faith sown.
    < 19/08/2012 16h41min06s BRT > < opinion > < LoggingService > < BEA-320400 > < C:\Users\FBELLUCO\AppData\Roaming\JDeveloper\system11.1.1.5.37.60.13\DefaultDomain\servers\DefaultServer\logs\DefaultDomain.log log file will be rotated. Reopen the log file if stopped tailings. This can happen on some platforms such as Windows. >
    < 19/08/2012 16h41min06s BRT > < opinion > < LoggingService > < BEA-320401 > < log file was shot in C:\Users\FBELLUCO\AppData\Roaming\JDeveloper\system11.1.1.5.37.60.13\DefaultDomain\servers\DefaultServer\logs\DefaultDomain.log00005. Log messages will continue to be logged in C:\Users\FBELLUCO\AppData\Roaming\JDeveloper\system11.1.1.5.37.60.13\DefaultDomain\servers\DefaultServer\logs\DefaultDomain.log. >
    < 19/08/2012 16h41min06s BRT > < opinion > < Log Management > < BEA-170027 > < server has established the connection with the Service of diagnosis level domain successfully. >
    < 19/08/2012 16h41min06s BRT > < opinion > < WebLogicServer > < BEA-000365 > < server status changed to ADMIN >
    < 19/08/2012 16h41min06s BRT > < opinion > < WebLogicServer > < BEA-000365 > < Server State has changed for RESUMING >
    < 19/08/2012 16h41min07s BRT > < opinion > < Server > < BEA-002613 > < Channel "Default [11]" now listen on 0:0:0:0:0:0:0:1:7101 for iiop, t3, ldap, snmp, http protocols. >
    < 19/08/2012 16h41min07s BRT > < WARNING > < Server > < BEA-002611 > < Hostname "FBELLUCO PC", corresponds to multiple IP addresses: 192.168.2.165, fe80:0:0:0:5d2e:304 b: c1ee:fef9 12, fe80:0:0:0:140f:246e:4e4b:5580% 18%, 2001:0:4137:9e76:140f:246e:4e4b:5580 >
    < 19/08/2012 16h41min07s BRT > < opinion > < Server > < BEA-002613 > < Channel "Default [10]" now listen on 127.0.0.1:7101 for iiop, t3, ldap, snmp, http protocols. >
    < 19/08/2012 16h41min07s BRT > < opinion > < Server > < BEA-002613 > < Channel "Default [4]" now listen on fe80:0:0:0:140f:246e:4e4b:5580:7101 for iiop, t3, ldap, snmp, http protocols. >
    < 19/08/2012 16h41min07s BRT > < opinion > < Server > < BEA-002613 > < Channel "Default [3]" now listen on fe80:0:0:0:0:5efe:c0a8:2 a 5:7101 for iiop, t3, ldap, snmp, http protocols. >
    < 19/08/2012 16h41min07s BRT > < opinion > < Server > < BEA-002613 > < Channel "[1] by default ' is now listening on 192.168.0.135:7101 for iiop, t3, ldap, snmp, http protocols. >
    < 19/08/2012 16h41min07s BRT > < opinion > < Server > < BEA-002613 > < Channel "Default" is now listening on 2001:0:4137:9e76:140f:246e:4e4b:5580:7101 for iiop, t3, ldap, snmp, http protocols. >
    < 19/08/2012 16h41min07s BRT > < opinion > < Server > < BEA-002613 > < Channel "Default [6]" is now listening on fe80:0:0:0:5cee:582d:c1d2:274 d: 7101 for iiop, t3, ldap, snmp, http protocols. >
    < 19/08/2012 16h41min07s BRT > < opinion > < Server > < BEA-002613 > < Channel "Default [9]" is now listening on fe80:0:0:0:5 ca 1:539 a: e6ac:87 d: 7101 for iiop, t3, ldap, snmp, http protocols. >
    < 19/08/2012 16h41min07s BRT > < opinion > < Server > < BEA-002613 > < Channel "Default [7]" is now listening on fe80:0:0:0:9808:46 d 3: f632:c499:7101 for iiop, t3, ldap, snmp, http protocols. >
    < 19/08/2012 16h41min07s BRT > < opinion > < Server > < BEA-002613 > < Channel "Default [8]" now listen on fe80:0:0:0:5d2e:304 b: c1ee:fef9:7101 for iiop, t3, ldap, snmp, http protocols. >
    < 19/08/2012 16h41min07s BRT > < opinion > < Server > < BEA-002613 > < channel 'by default [5]' now listen on fe80:0:0:0:5d5a:6be2:c66e:a30e:7101 for iiop, t3, ldap, snmp, http protocols. >
    < 19/08/2012 16h41min07s BRT > < opinion > < Server > < BEA-002613 > < Channel "Default [2]" is now listening on 192.168.2.165:7101 for iiop, t3, ldap, snmp, http protocols. >
    < 19/08/2012 16h41min07s BRT > < opinion > < WebLogicServer > < BEA-000331 > < started WebLogic Admin Server "DefaultServer" domain "DefaultDomain" running in development Mode >
    < 19/08/2012 16h41min07s BRT > < opinion > < WebLogicServer > < BEA-000365 > < Server State has changed in the RACE >
    < 19/08/2012 16h41min07s BRT > < opinion > < WebLogicServer > < BEA-000360 > < server started operation >
    IntegratedWebLogicServer start time: 16364 ms.
    IntegratedWebLogicServer has begun.
    [Run application on Server Instance IntegratedWebLogicServer ASSANE...]
    [16: 41:08]-deployment began. ----
    [16: 41:08] the target platform's (Weblogic 10.3).
    [16: 41:09] recovery of the existing application information
    [16: 41:09] analysis of the dependence running...
    [16: 41:09] deployment 2 profiles...
    [16: 41:10] wrote on the Web for C:\Users\FBELLUCO\AppData\Roaming\JDeveloper\system11.1.1.5.37.60.13\o.j2ee\drs\IBTI\ViewControllerWebApp.war application Module
    [16: 41:10] wrote the Module Enterprise Application to C:\Users\FBELLUCO\AppData\Roaming\JDeveloper\system11.1.1.5.37.60.13\o.j2ee\drs\IBTI
    [16: 41:10] Application deployment...
    < 19/08/2012 16h41min11s BRT > < WARNING > < J2EE > < BEA-160195 > < application version of the lifecycle event listener oracle.security.jps.wls.listeners.JpsAppVersionLifecycleListener is ignored, because the ASSANE application is not versioned. >
    < 19/08/2012 16h41min11s BRT > < error > < hats > < BEA-149265 > < error has occurred in the execution of the request for deployment with the ID ' 1345405270810 'for task ' 0'. Error: ' weblogic.application.ModuleException: '
    weblogic.application.ModuleException:
    at weblogic.jdbc.module.JDBCModule.prepare(JDBCModule.java:302)
    at weblogic.application.internal.flow.ModuleListenerInvoker.prepare(ModuleListenerInvoker.java:199)
    to weblogic.application.internal.flow.DeploymentCallbackFlow$ 1.next(DeploymentCallbackFlow.java:517)
    at weblogic.application.utils.StateMachineDriver.nextState(StateMachineDriver.java:52)
    at weblogic.application.internal.flow.DeploymentCallbackFlow.prepare(DeploymentCallbackFlow.java:159)
    Truncated. check the log file full stacktrace
    Caused by: weblogic.common.resourcepool.ResourceSystemException: cannot load the class driver: com.mysql.jdbc.Driver
    at weblogic.jdbc.common.internal.JDBCUtil.parseException(JDBCUtil.java:301)
    at weblogic.jdbc.common.internal.ConnectionEnvFactory.loadDriver(ConnectionEnvFactory.java:75)
    to weblogic.jdbc.common.internal.ConnectionEnvFactory. < init > (ConnectionEnvFactory.java:131)
    at weblogic.jdbc.common.internal.ConnectionPool.initPooledResourceFactory(ConnectionPool.java:712)
    at weblogic.common.resourcepool.ResourcePoolImpl.start(ResourcePoolImpl.java:235)
    Truncated. check the log file full stacktrace
    >
    < 19/08/2012 16h41min11s BRT > < WARNING > < hats > < BEA-149004 > < failures have been detected all introducing deploy application task "ASSANE. >
    < 19/08/2012 16h41min11s BRT > < WARNING > < hats > < BEA-149078 > < message 149004 track battery
    weblogic.application.ModuleException:
    at weblogic.jdbc.module.JDBCModule.prepare(JDBCModule.java:302)
    at weblogic.application.internal.flow.ModuleListenerInvoker.prepare(ModuleListenerInvoker.java:199)
    to weblogic.application.internal.flow.DeploymentCallbackFlow$ 1.next(DeploymentCallbackFlow.java:517)
    at weblogic.application.utils.StateMachineDriver.nextState(StateMachineDriver.java:52)
    at weblogic.application.internal.flow.DeploymentCallbackFlow.prepare(DeploymentCallbackFlow.java:159)
    Truncated. check the log file full stacktrace
    Caused by: weblogic.common.resourcepool.ResourceSystemException: cannot load the class driver: com.mysql.jdbc.Driver
    at weblogic.jdbc.common.internal.JDBCUtil.parseException(JDBCUtil.java:301)
    at weblogic.jdbc.common.internal.ConnectionEnvFactory.loadDriver(ConnectionEnvFactory.java:75)
    to weblogic.jdbc.common.internal.ConnectionEnvFactory. < init > (ConnectionEnvFactory.java:131)
    at weblogic.jdbc.common.internal.ConnectionPool.initPooledResourceFactory(ConnectionPool.java:712)
    at weblogic.common.resourcepool.ResourcePoolImpl.start(ResourcePoolImpl.java:235)
    Truncated. check the log file full stacktrace
    >
    [16: 41:11] # incomplete deployment. ####
    [16: 41:11] remote deployment failed (oracle.jdevimpl.deploy.common.Jsr88RemoteDeployer)
    # Cannot run application ASSANE due to the deployment on IntegratedWebLogicServer error.
    [Application ASSANE stopped and cancelled Server Instance IntegratedWebLogicServer]

    Thank you!

    Add
    mysql_jconnector.jar in the C:\bea\jdeveloper\\system11.1.1.5.37.60.13\DefaultDomain\lib folder

  • Equium - Windows cannot load the device driver for USB dongle

    I've been using a dongle for about a month without problems, but now it is said (in Device Manager) "Windows cannot load the driver for this hardware device. The driver may be corrupted or missing. (Code 39) »

    -what it means and how can I solve this problem?

    Hi Ozcat,

    What USB dongle is that exactly?
    What cell phone do you have?
    What operating system is installed?
    Have you already tried to reinstall the driver for USB dongle?

  • Windows XP cannot load the device driver for the CD burner. The driver may be corrupted or missing. (code39)

    I have a HP Pavilion running on XP.

    Device Manager displays the following material: A: HP CD Writer CD16b

    B: pioneer DVD - RomDVD - 116.

    Both have the dreaded yellow symbol showing that they are not working (they do not show in Windows Explorer)

    By clicking on the two points of product

    "Windows cannot load the driver for this hardware device. The driver may be corrupted or missing. (code39).

    I created the 'properties' of each machine that pilots should be:

    For a. imapi.sys, redbook.sys c:\windows\system32\storprop.dll, pfc.sys and similarly for B machine.

    I copied imapi.sys, redbook.sys, and storprop.sys from another XP computer (which works well), deleted these drivers and pasted in the replacements.

    Does not cure the problem.

    Now the pilot 'pfc.sys' cannot find anywhere else. Click on the driver generates (v 2.1.0.165 Inc. - Padus ASPI Shell)

    I'm out of my depth now. No idea what is ASPi Shell.

    Help, please

    The problem is most likely the pfc.sys.

    What I would say, is to follow the steps under "Windows XP" in the MS KB article:

    http://support.Microsoft.com/kb/982116

    These measures, to remove the UpperFilters and LowerFilters, values if they exist, in the registry key named can help.

    Create a System Restore Point beforehand and restart the computer later.

    Following steps should remove pfc.sys which may have been left to the wire after that uninstall of software associated with the readers.

    Here is some info on the pfc.sys:

    http://www.Neuber.com/TaskManager/process/PFC.sys.html

  • Satellite L550 - cannot load the sound driver in Win XP

    I bought a Satellite L550 with Vista preinstalled and you want to use XP.
    I loaded XP and have no audio device.

    I downloaded the Sound Driver TC40072000A.exe but when I run it, it extracts and then does nothing.
    I might have need of a few other drivers loaded first?

    Please help, thanks,

    John

    Hello

    The laptop needs a Realtek HD audio driver.
    You can download the driver directly from the page of the Realtek driver.

    But before you try to reinstall the sound driver, you must update the Win XP!
    All the service packs, SP2, and SP3 must be installed!
    It is very important since the SP3 contains fixes and patches needed.

    After installing SP3, you can follow with driver sound

    Welcome them

  • my dvd drive has stopped working. says windows cannot load the device driver, can be corrupted or missing code 39. When I search for updates, it says I have the most up to date. Help!

    drive is Matshita DVD-RAM UJ-850 s a SATA drive

    I use windows Vista

    Driver provider Microsoft

    Day 21/06/2006

    Version 6.0.6002.18005

    Hello

    Code 39 means that the driver is corrupted or missing.

    Please make all below even if you have done some before as it is often the set of operations which solves
    the question.

    Try this - Panel - Device Manager - CD/DVD - double-click on the device - driver tab - click
    Update the drivers (this will probably do nothing) - then RIGHT click the drive - UNINSTALL - REBOOT
    This will refresh the default driver stack. Even if the reader does not appear to continue below.

    Then, work your way through these - don't forget the drive might be bad, could be a loose cable or
    slight corrosion on the contacts (usually for a laptop) and other issues.

    Your CD or DVD drive is missing or is not recognized by Windows or other programs
    http://support.microsoft.com/kb/314060 - a Mr Fixit

    Try this fix manually if the Fixit 314060 does not work
    http://www.pchell.com/hardware/cd_drive_error_code_39.shtml

    Your CD or DVD drive is missing or is not recognized by Windows or other programs-
    a Mr Fixit
    http://support.Microsoft.com/kb/982116

    The CD drive or the DVD drive does not work as expected on a computer that you upgraded to Windows Vista
    http://support.Microsoft.com/kb/929461

    When you insert a CD or a DVD, Windows Vista may not recognize the disc
    http://support.Microsoft.com/kb/939052

    Your CD or DVD drive cannot read or write media - A Mr Fixit
    http://support.Microsoft.com/GP/cd_dvd_drive_problems

    CD/DVD drive does not appear in Windows Vista, or you receive this error during the installation of Windows Vista after booting from the DVD (AHCI)
    http://support.Microsoft.com/kb/952951
    Drive CD - R or CD - RW Drive is not recognized as a recordable device
    http://support.Microsoft.com/kb/316529/

    Hardware devices not detected or not working - A Mr Fixit
    http://support.Microsoft.com/GP/hardware_device_problems

    Another possibility is that the cables are loose. Remove ALL power, then make sure that the cables in both
    ends. Remove and replace, do not just tight. For laptops, you can often clean power and
    contacts data with a pencil eraser.

    --------------------------------------------------------------

    Also check with your system manufacturer to see if there are any updated drivers for your DVD. Or even if it
    are you can reinstall the 'old'. Many use Windows default drivers however some special aura
    ones. Also check the website of the manufacturer of the car.

    Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
    http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

    I hope this helps.

    Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

  • CD Rom drive - DVD Ram - windows cannot load the device driver

    Model: HP Pavilion Touchsmart Notebook PC 15 n209TU 15

    Operating system: Windows 8

    The CD drive does not show

    Error code 39

    Hello

    Please use the following meethods to fix:

    http://support.Microsoft.com/kb/314060/en-us

    Kind regards.

  • error code 39 cannot load the device driver, cannot load microsoft kernel drm adio Descrambler

    I have no sound, no audio output device installed is the message on the speaker icon.
    Open the Device Manager, I get the error code as indicated in the title. My audio is Realtek ALC888 HD audio

    Dear anyone, I had the same problem. One day, my sound card / audio just stopped. X red on the sound icon. My CD/DVD worked fine but no sound. I uninstalled the sound card, updated drivers... everything I could find... nothing worked. I run only Vista 32 bit with a Realtek AC 97 integrated sound. Looked on the forums and read and I tried for weeks hoping to not have to reformat. Finally, I got in the registry and lucky. Here's what I did: Device Manager: uninstalled all the sound stuff. I kept getting this: Microsoft Kernel DRM Audio Descramber Microsoft Streaming Clock Proxy Microsoft responsible for quality Proxy Microsoft Service Proxy Microsoft Tee/receiver-to-Sink Converter Realteck AC 97 I uninstalled all that sort of thing. Then to regedit and see below Regedit navigate to: HKeyLocalMachine\System\CurrentControlSet\Control\Class {4D36E96C-E325-11CE-BFC1-08002BE10318} ON RITE PANE... I deleted: for FILTERS LOW Dword value (Mine was something that read like LVUSB or some such), I restarted and did not leave Windows Installer automatically... don't leave... it will give you everything _ mentioned above. I reinstalled my sound of a pack of Realtek for Vista. Lo and behold... sound is back. Vista still hate the pilot but did before cuz Vista sucks... but it works like any other so... screw it! I am happy. Hope this works for you. chatilingus

  • Intel Pro/Wireless 3945ABG cannot load the driver

    Wireless worked fine since I bought this laptop

    Now it has stopped working and has a yellow exclamation mark in Device Manager - it says "this device does not work properly because Windows cannot load the drivers required for this device. (Code 31) »

    So I uninstalled the device and check the box that says "Remove the driver for this device", then reinstalled the latest version of the driver on the Toshiba site 11.5.0.32.

    Windows Vista detects new hardware and install the driver, but fails with 'Windows found driver software for your device but encountered an error trying to install it. The system cannot find the file specified. "

    All ideas

    Remove the wireless network adapter in the device, download manager driver the latest from Intel page and repeat the procedure of installation of the driver.

    Good luck

  • COM1 "Windows cannot load the driver for this hardware device. The driver may be corrupted or missing. (Code 39) »

    Running Server 2003, Web Edition SP2 Build 3790.

    The two ports COM1 COM2 & lost in the Terminal Server session with a managed switch.

    Gives the device as Manager: "Windows cannot load the driver for this hardware device. The driver may be corrupted or missing. (Code 39) "on both ports.  pilots - serial.sys and serenum.sys (5.2.3790.3959 worm file: 64 KB / KB 18: 2/17/2007) 03:58

    Tried all common solutions driver update and uninstalling/reinstalling SP2 installation rerunnig. But the problem remains.

    Hello

    Your question is more complex than what is generally answered in the Microsoft Answers forums. It is better suited for Windows Server on TechNet. Please ask your question in the TechNet forum.

    http://social.technet.Microsoft.com/forums/en-us/winserverhyperv/threads

     

    Diana

    Microsoft Answers Support Engineer

  • My TSSTcorp DVD +-RW TS - L632D does not work, error "Windows cannot load the driver for this hardware device. The driver may be corrupted or missing. (Code 39) »

    And it displays the following message: "Windows cannot load the driver for this hardware device. The driver may be corrupted or missing. (Code 39) ». I tried all the tricks troubleshooting to no effect. I uninstalled and reinstalled and look for the updates to install. What should I try next?

    http://support.Microsoft.com/kb/314060

    Your CD or DVD drive is missing or is not recognized by Windows or other programs

  • Re: Card C-media - Windows cannot load the driver for this hardware device. (Code 39)

    Windows cannot load the driver for this hardware device. The driver may be corrupted or missing. (Code 39)

    Reference Dell 3000 win xp family, sp 2 card its replacement will not install right.

    I just reinstalled windows on my Dell computer and have struggled to reinstall the different divers, applications and programs that I used to have.  The long, everything went well, except for the audio part.

    Windows Device Manager shows the icon replacement C-media with a yellow top warning label. Under "Properties", it shows this message: Windows cannot load the driver for this hardware device. The driver may be corrupted or missing. (Code 39)  Click Troubleshoot to start the troubleshooter for this device.

    I uninstalled and completely removed all traces of the drivers C-media, etc. of my computer, rebooted, reinstalled the driver C-media since the original CD (several times!), but the yellow warning label is always there!   When I ask to reinstall drivers C-media a notice tells me I have the best drivers now.

    BTW, the audio worked perfectly in this machine until the windows reinstall so I am sure that the problem is not with the sound card, drivers or the installation CD.  Thanks for any help on this, jim

    Hello

    Please follow the steps from the link below.

    http://support.Microsoft.com/kb/310123

    I also suggest you to install the drivers from the Dell site.

    http://www.Dell.com/support/drivers/us/en/usgen1/DriversHome/NeedProductSelection

  • DVD / CD ROM Drive - cannot load the drivers

    My DVD / CD ROM has stoppped working.  Replaced by a new, but get this error in Device Manager

    Windows cannot load the driver for this hardware device. The driver may be corrupted or missing. (Code 39)

    New CD-ROM/CD-RW, or DVD-ROM, etc., usually never come from the factory with

    the parameters of the right stem. Take the device, look at the back, place the jumper pin plastic.

    set to slave or master, if possible, install it on another cable IDE, set another pin device

    According to the needs. XP will reinstall at startup.

    In addition, most of these devices is "firmware" updates, go to his web site from mfg & install it

    If it is available...

  • Audio loss. UAA Bus Driver reads Windows cannot load the driver for this hardware device. The driver may be corrupted or missing. (Code 39). All the patches?

    Audio loss.  Device Manager indicates Microsoft UAA Bus Driver as: "Windows cannot load the driver for this hardware device. The driver may be corrupted or missing. (Code 39) ».  Tried to update driver and restore without success.  Tried the program of "Fix - It", which has identified an error with the sound system, but said that he could not fix it.  Restored to an earlier date but still what system did not go.  Tried to uninstall and reinstall the driver.  Uninstall was successful but reinstall it read that the hdaubus file does not exist.  I'm a computer dunce.  Any help out there?

    Hi BarbaraWolfe,
     

    There are many causes of Code 39 errors:

    • A required device driver is missing.
    • A required binary file is corrupted.
    • There is a problem with the file I/O process.
    • A driver that refers to an entry point in another binary file cannot load.
    Re-install the driver by downloading it from the link given:
     
    Additional reference on:
    Check if that helps.

Maybe you are looking for

  • Deleting files is not releasing space

    A few weeks ago I noticed that my Macbook pro (mid-2010) has been slow.  I took a quick glance to the disk utility and I saw that I had only 6 GB of free space!  Oops!  So, I backed up everything on my hard drive external and put to work.  I started

  • 13 - c010nr: error code: 0xc0000225

    My notebook said necessary computer factory reset. So I did now the HP logo comes up. I tried F2, F10 F12 and escape to enter in recovery mode is the error code that I said that I need CD installer or usb recovery although I created the recovery driv

  • Help! Windows cannot load a critical system driver is missing or damaged.

    Hello I really hope that someone can help me! I've read through dozens of discussions without results. The laptop I use for establishing the budget, research and games has Windows Vista.  I was downloading of test (probably too at the time) and my sy

  • How to reinstall Vista on HP Pavilion dv6775, do not have the installation diskettes

    My computer is HP Clubhouse dv6775us, when I buy, it have windows vista home premiun, but this week it have problems and I formatted it, now I don't have a CD for instalation of window vista home premiun, how can I get it? I tried to use a CD that gi

  • BlackBerry compatible host for leaderboards and achievements

    Everyone will agree that a good game should provide a way to match your performance against others, so Blackberry team should have an answer to that. Scoreloop was strong and had an excellent support, however it is no longer operational, so I guess i