An action that I recorded only works on the original image, but won't on others, I run it on that!

Similar Questions

• Satellite A210 - 10 c only works with the 800 Mhz instead of 1.6 Ghz

  Hello

  I have a very big problem. One day, I look in Vista on my resource monitor and see that the max freuquence is only 50%.

  So first of all I think that is no problem because the assets 'energy savings' energy recorded.
  I have a Satellite A210 - 10 c portable.

  So I switch to maximum power and perform a test of prime95. But hell, the max freuquence has not changed. I also installed everest and cpu z, but all programs show the same to me:

  My laptop only works with the 800 Mhz instead of 1.6 Ghz!

  I'm looking for drivers for the AMD processor, but you need not for Vista. Update all the drivers of Toshiba and Programms and BIOS (in fact, it is the 1.9).

  Nothing helps.

  As a last test, I reinstalled Vista, but also did not help.

  And now I'm at a loss what to do.

  I hope someone can help me.

  Good bye...

  Have you installed the Vista using the recovery CD or the original CD of Microsoft Vista?

  I ask because the restore CD contains all drivers for Toshiba and yellow exclamation marks should not be apparently in Device Manager.

  If you used the original CD of Vista I think that you have not installed the Package of Intel Robson.

  I found the package of Robson on the Toshiba driver-> Satellite P200 area page.

  Maybe you should check this.

  Your comments would be appreciated

• BlackBerry Z10 headphone only works with the left ear

  My headphones (beats studios) only works with the left ear when connected. The helmet has never had a problem on my old iPhone 4 and currently with my rMBP so I know that's not the headphones. Any suggestions?

  There seems to be a problem with the jacket of the head. They are defective for a few pieces and the jacket cannot recognize the HP in the same case, what makes the phone to give no sounds on the notification.

  Try to use different headphones. If the problem persists try replacing the model.

• Advanced actions do NOT appear to work ONCE the user fills in a questionnaire?

  Advanced actions do NOT appear to work ONCE the user fills in a questionnaire?

  In my project, I have disabled the Quiz results slide and manually set the actions of success/failure to "go to" a customized results slide:

  

  On results carts custom pass/fail (as well as all the slides that follow), I need to disable the playback bar so that the user cannot use the navigation controls. I have created a tip action to disable the playback bar and set it on every slide that follows the Quiz:

  

  The tip action fails to disable the playback on my personal results slides bar; but I know that the action does not work correctly because it works on all the slides that follow my personal results slides. This leads me to believe that there is something about the function "go to" success/failure that is causing my Advanced action not to function. Is there a work around for this?

  Just checked out, and it works for me. I combined the jump and turn off the bar reading a success and failure action:

  SuccessAction

  • Jump to drag the success
  • Assign the cpCmndShowPlaybar with 0

  FailureAction

  • Jump to slide fail
  • Assign the cpCmndShowPlaybar with 0

  Why you split? He was not even the need to create an advanced action.

• CSS only works on the page and not in the css doc

  So I have the following code for the shadows: h3.a {text-shadow:-50px 50px white, 1px 1px #00F}.  I put it on my css doc which is connected to my page, but it does not appear.  then I put it in the top of the page, and then it appeared.  Why it only works on the page?

  I just passed something like that for a few hours yesterday and realized that I was not saving the page external .css real after adding new styles.

• Windows appear on the taskbar, but won't focus, other 3 goes, only 1 that seems to be the main window is not found

  Windows appear on the taskbar, but won't focus, other 3 goes, only 1 that seems to be the main window is not found

  ALT + tab select window; ALT + SPACEBAR; maximize; sigh

• LabVIEW 2013 executable only works on the development machine?

  Hi all

  I created an executable to distribute my test software, but it only works on the development computer. With success, I gave my front executables with labview 2012 on the target computers by simply creating the .exe in the project and then Explorer in installing labview nessary drivers and run the engine of time without problems. Now, I created a new test with Labview 2013 program and I can not get my new test .exe application to run on the target computer. Has anyone seen this kind of problem before?  Any help will be appreciated.

  Thank you

  
  

• How can I put pictures outside the window of Photoshop elements 14 work, so that I'm not obliged to work within the program window, but use my screen completely for the image?

  How can I put pictures outside the window of Photoshop elements 14 work, so that I'm not obliged to work within the program window, but use my screen completely for the image?

  dannyb76251437 wrote:

  How can I put pictures outside the window of Photoshop elements 14 work, so that I'm not obliged to work within the program window, but use my screen completely for the image?

  Note that you can work with two screens and drag and drop the image to display on the other window.

  I think you mean working temporarily with the window enlarged image without displaying all the tools and panels.

  See:

  Panels and bins in Photoshop Elements

  My advice: take the time to read the above help and especially to look at ways to maximize this window if you are on Mac or Win.

  Set your preferences in the Edit menu to "allow the floating windows in expert mode.

  Use the "tab" on the keyboard key to hide or show your panels and tools quickly.

  Find out how to hide the photo tray.

• Whenever I export an image from lightroom, if I try to work on the original again once he said immediately that the file is not found.

  As noted above, immediately after you export an image in a file - if I want to go back to work on this image it just says that the file is not found. I have not changed the name of the file.

  Also, after work on an image in Photoshop and saves a copy to the lightroom folder - I don't find it anywhere. It works if I save on the original image from lightroom, but if I save a copy I can't find it in the file anywhere!

  Hi mayab13,

  How do you export the image from Lightroom, because export image from Lightroom keeps the image in Lightroom.

  Could you please tell me your step by step workflow.

  Kind regards

  Tanuj

• Is there a way to get the CF work around the original file?

  When I download a file in cf, cf renames the file if the file already exists. Is there a way to get the CF work around the original file?

  Yes of course nothing.

  The documentation tells you even this.
  http://livedocs.Adobe.com/ColdFusion/8/htmldocs/Tags_f_10.html

  I will even make notice that the attribute "nameConflict" is the one that you
  you want to read.

• I want to reinstall our Adobe Acrobat Pro XI because we started to get the error messages. I followed the original instructions, but when I logged in I couldn't find 'My orders' page that is required to install my order.  Any ideas?

  I want to reinstall our Adobe Acrobat Pro XI because we started to get the error messages. I followed the original instructions, but when I logged in I couldn't find 'My orders' page that is required to install my order.  Any ideas?

  Barbara,

  If you are looking for your serial number, sign in to your account Adobe. On the page for managing accounts that appears, all of your registered products and their serial numbers are listed in the section Plans & products. For more information about the location of the serial numbers, please see find a serial number

  Here is the link to download and install the software:

  Acrobat X, XI

  Guinot

• How to work the DNG? is it always the original image with the settings of self-development?

  Hello!

  A question about DNG. recently, I had to put a bunch of my RAWs to print elsewhere. I copied all the RAWs and XMP files. Then imported on a different PC/LR. Others do not, some reflect my edit-adjustments. RAWS all VINTAGE.

  I save now on some DNG of my final print changes.

  I'm thinking a DNG in PDF format.

  When I export a DNG a RAW processed, is it cooked in? or is it always the original image with the settings of self-development?

  Thank you

  Alex

  Lightroom is a non-destructive Editor. So, you can take any file type (JPG, DNG, RAW, TIF, other) and edit this photo, and always come back to the unedited version.

  If you export your RAW as DNG or export your RAW as the 'Original', you can also revert to the unedited export version (but not if you export as JPG or TIF).

  With regard to your initial statement that you have 'copied the RAWs to print elsewhere', they may not had the changes written to XMP. It would also be a problem with the DNG format, as I said, you should enable the option to write changes into XMP or issue a command, because by default, Lightroom writes not changes to your DNG or sidecar xmp for the RAWs files.

  The copy is different from export.

• Apple tv only works on the left speaker

  Through any HDMI input audio left is the only work, regardless of the selection of entries.

  Two audio channels running on all HDMI inputs when tested with a DVD player, had the same problem with Google Chrome and referred to the shop. Everyone knows about this phenomenon?

  carpet

  It would sound as if you have confirmed that the question must be with the device and is not the cable or TV. How old is this particular Apple TV? It is still under warranty or AppleCare?

  TT2

• L50-B-1NM satellite - wifi only works near the router

  Hi just bought this laptop for my daughter Toshiba L50-B-1NM 15.6 inches processor Ci3 4 GB 1 TB and wifi only works if he was sitting next to the router.

  It will connect to the internet if the ethernet cable is connected, BUT for wifi, the laptop has been sitting almost touch the router. The rest of the House works well.

  Please could you help me before I take it back to the shop and eventually making a fool of myself.

  I'm really not good with technology so if you do not answer could you explain to me like a baby please ;) lol

  Thank you very much, totally disappointed at the moment because it cost me a lot of money for it :(

  Hi maria,

  I think you should consider a fact: the L50-B-1NM Satellite was equipped with an Intel 802.11ac + card agn combo Wifi/BT.

  802.11 AC is a new WLan standard that isn't taken care of by all old WLan routers.
  But of course, the standard 802.11 A / G or N must be supported by older devices correctly.

  I think first of all you must check if the wireless performance question isn't related to energy saving settings. I guess during wifi problems, the laptop uses battery power
  In this case we would use different power plan settings.

  Please check the settings that are in the advanced within the current energy saving Central WLan power settings.

  Where this doesn t help you solve the problem of WiFi signal weak, you should contact the authorized Toshiba maintainer to check the connection to the WLan antenna.

  It may be possible that the antenna isn't properly connected, which is originally a weak WiFi signal.

  Because the laptop is under warranty, it should be fix toll-free number.

  Greetings

• Executives ignored in the acquisition of images with 4 Configuration of the camera (cards 2 x 1430), record only half of the expected data

  Hi all

  I have a VI that puts in place a continuous grab for four camera link cameras at 100 Hz (512 x 640).  I have the cameras running on an external clock of 100 Hz for synchronization (comes from box NI DAQ, trigger ports on 1430 cards are not connected to anything).  The VI sticks all the frames in a queue, and then I (slowly) he writes to disk after that I get what I want.

  The problem is, for a minute 4 capture, I get only about 14 000 items in the queue instead of 24 000.  Also, each image gets populated with a number of buffer, so I can see it is missing all the other images or something like that, sometimes it will jump 10 in a row, sometimes it will jump rare... any ideas?

  Here is a picture of my installation of collection (Scripture on the part of the disk is not displayed, but that pours out of the queue is fine)-

  

  Hello

  I see a number of problems with the approach in your VI that I'll try to cover...

  Your consumption with queues and images won't work as you wrote because the images are a type of reference data and so put them in the queues is not copy data values, only the references. So if you keep to the same reference to the image in a queue, they are all pointing to the same data of the image (which may be substituted).

  A better approach is to have two queues of images, representing the 'free' pads and then one that represents the images 'full' (your queue current consumer). You would then have your acquisition loop pull a 'free' image, fill it with data via a Get buffer call and then queue it for your use. Your consumer could pull this queue, do its thing and then queue the image to the queue 'free' for the producer to use again.

  In addition, your code does not currently use the lower level is VI buffer, so you take advantage of the buffering model input-output IMAQ uses internally. The simple Grab acquire VI returns only the most recent image, but if you fall at all it does not use the FIFO. You want to call make buffer with a buffer incremeenting number so that you do not skip the buffers and are allowed to get behind up to the number of buffers in the buffers configured list.

  Eric